I've installed a Belkin router and can no longer connect my MacBook to the HP Photosmart printer.

The MacBook connects to the web through the Belkin but not the printer HP Photosmart D110 [E17D6D]. In talking with the Belkin people they said I need to make sure the IP address is 192.168.2.1 but that's listed now as the Default Gateway. The present IP Address is 192.168.2.6. How do I update the primary IP Address on my printer?

Lets try these steps first
You have been thorough with your previous steps. I would also try:
Print a network configuration page from the printer, see the link below for instructions.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02786894&tmp_task=useCategory&cc=us&dlc=en&lang...
Enter the IP Address into the address bar of an internet browser and press Enter, this should load a page about your printer.
Click on the Network Tab.
Click on IPv4 under the Wireless section.
Click on Manual Configuration.
Enter the same information as the Network Configuration page into IP Address, Subnet Mask, Default Gateway.
Enter the Default Gateway value into the Preferred DNS Server field and enter 8.8.8.8 into the Alternate DNS Server field.
I work for HP but my posts and replies are my own thoughts.
If I have solved your issue, please feel free to provide kudos
Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.

Similar Messages

I upgraded to ios8 and can no longer connect my iPad to the projector in my classroom.

I'm not able to connect my iPad to the projector in my classroom after upgrading to ios8. Any thoughts as to why this device is not being recognized any longer?

Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
   -- click on New icon
   -- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
   -- etc.
Developers:
"Submitting Bugs and Feedback
Your feedback goes a long way towards making our products even better. With Apple Bug Reporter, you can submit bug reports or request enhancements to APIs and developer tools."
https://developer.apple.com/bug-reporting/
Enterprise support:
Call enterprise support (866) 752-7753 to create a case ID number

I recently installed itunes update and can no longer connect to network nor internet

I recently (sept 2013) installed itunes update and can no longer connect to a network nor internet wired /wireless. I know it is not the gateway as other devices work. Please help. I am not very knowledgable so exact instructions will be most helpful.

Try connecting your computer/laptop directly to the base station with an ethernet cable to one of the external ports and install your network settings. If it finds it there, it will find it after you've reloaded your network info to the base via the Apple Utility. Hopefully when you disconnect afterward, all will be fine. Be sure not to select "closed" network although Macs will login with no prolem, PC's have trouble doing so even with the network data stored in the internet settings.
Good luck!

My Mac is producing gray screen at startup and crashes. I'm afraid that everything explode and disappear, and can no longer connect and work with my Mac. Can anyone help ?? Thank you.

My Mac is producing gray screen at startup and crashes. I'm afraid that everything explode and disappear, and can no longer connect and work with my Mac. Can anyone help ??
Thank you.
Problem description:
gray screen at startup and crashes
EtreCheck version: 2.1.1 (104)
Report generated 6 de dezembro de 2014 13:29:43 BRST
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6750M - VRAM: 1024 MB
Color LCD 1440 x 900
Intel HD Graphics 3000 - VRAM: 384 MB
System Software: ℹ️
Mac OS X 10.6.8 (10K549) - Uptime: 0:31:56
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (698,64 GB)
S.M.A.R.T. Status: Verified
- (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 749.81 GB (378.70 GB free)
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple, Inc. MacBook Pro
Problem System Launch Daemons: ℹ️
[not loaded] org.samba.winbindd.plist [Support]
Launch Agents: ℹ️
[running] com.babylon.activation.plist [Support]
[loaded] com.divx.dms.agent.plist [Support]
[loaded] com.divx.update.agent.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[running] com.skype.c2c_service.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
FaceboxPro Aplicativo (/Applications/FaceboxPro.app)
Safari Aplicativo (/Applications/Safari.app)
Octoshape Aplicativo (/Users/[redacted]/Library/Octoshape/Octoshape.app)
uTorrent UNKNOWN (missing value)
Dropbox Aplicativo (/Applications/Dropbox.app)
Inkscape UNKNOWN (missing value)
RealPlayer Downloader Agent Aplicativo (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
HP Product Research Aplicativo (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
OVSHelper: Version: 1.1 [Support]
Google Earth Web Plug-in: Version: 7.1 [Support]
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
RealPlayer Plugin: Version: Unknown [Support]
AdobePDFViewerNPAPI: Version: 10.1.12 [Support]
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
DivX Web Player: Version: 3.1.1.9 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.6.6
iPhotoPhotocast: Version: 7.0 - SDK 10.7
SharePointBrowserPlugin: Version: 14.1.2 [Support]
AdobePDFViewer: Version: 10.1.12 [Support]
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
User internet Plug-ins: ℹ️
npsf_uni: Version: sf 3.3.2.1 [Support]
OctoshapeWeb: Version: 1.0 - SDK 10.8 [Support]
Safari Extensions: ℹ️
Searchme Adware! [Remove]
Skype Click to Call
iSkyDeluxe
TED HTML5 video playe
Audio Plug-ins: ℹ️
iSightAudio: Version: 7.6.6
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Skype Click to Call [Support]
Tuxera NTFS [Support]
Time Machine: ℹ️
Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ℹ️
      5% WindowServer
      4% DivXMediaServer
      1% fontd
      0% RealPlayer Downloader Agent
      0% WebProcess
Top Processes by Memory: ℹ️
296 MB WebProcess
202 MB FaceboxPro
185 MB Microsoft PowerPoint
163 MB Safari
137 MB Microsoft Word
Virtual Memory Information: ℹ️
843 MB Free RAM
1.76 GB Active RAM
706 MB Inactive RAM
978 MB Wired RAM
577 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 6, 2014, 12:58:24 PM Self test - passed
Dec 6, 2014, 12:23:11 PM Kernel_2014-12-06-122311_MacBook-Pro-de-...panic [Details]
Dec 6, 2014, 07:08:28 AM PluginProcess_2014-12-06-070828_MacBook-...crash
Dec 5, 2014, 05:24:39 PM WebProcess_2014-12-05-172439_MacBook-Pro...crash
Dec 5, 2014, 10:45:59 AM Kernel_2014-12-05-104559_MacBook-Pro-de-...panic [Details]
Dec 5, 2014, 10:18:14 AM Kernel_2014-12-05-101814_MacBook-Pro-de-...panic [Details]
Dec 3, 2014, 08:28:35 PM locationd_2014-12-03-202835_localhost.crash
Dec 5, 2014, 10:25:44 AM Kernel_2014-12-05-102544_MacBook-Pro-de-...panic [Details]

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)

I am using Dreamweaver CS4 and can no longer connect to Device Central - Can you help me with this?

I am using Dreamweaver CS4 and can no longer connect to Device Central - Can you help me with this?

Device Central was discontinued April 23, 2012.
http://www.adobe.com/products/devicecentral.html
And replaced with Adobe Edge Inspect CC (for Cloud subscribers)
http://html.adobe.com/edge/inspect/
Nancy O.

I have a uk iTunes account but have moved to the Netherlands and can no longer connect to the iStore from my iPad. Do I need to update my iTunes account to a Dutch one?

I have a uk iTunes account but have moved to the Netherlands and can no longer connect or make purchases. Do I need to change my account to a Dutch one?

You can't transfer any content from one account to another account (nor can accounts be merged) - all content will remain tied to the account that downloaded it.
Do you not have copies of all of your downloads e.g. on your computer or backup of your downloads/library ? Whilst you are in Australia you can't redownload your UK purchases (you have to be in a country to use its store), if you have them on your computer's iTunes library then you should be able to stream them from it to your Apple TV

I just upgraded to Yosemite and can no longer connect to the WIFI any suggestions

I Just up upgraded to Yosemite and can no longer connect to internet - any ideas?

I have the same problem after loading OS X 10.10 Yosemite on my MacBook Pro (Late 2008). Wi-Fi (Time Capsule) connects OK, then I open Safari and it waits for a minute and then gives me a message that it can't load the page because I'm not connected to the Internet. The Wi-Fi is fine. When I run the network analysis, it shows that everything is fine up to the Internet; the dots are red after that. I have another MacBook Pro (Retina, Mid 2012) and it loaded and runs with no known problems (so far). I am writing this message on the Late 2008 MacBook Pro, so you can see that there is no problem with the Internet connection. It is a Yosemite problem. My iPhone and newer MacBook Pro connect with no problem. I loaded Yosemite TWICE, then ran the Disk Utility and fixed some disk permissions but there were no other problems identified. Restarting after reloading Yosemite and the same problem is there. Restarted after running the disk utility and fixing disk permissions and it still can't connect to the Internet. Same problem. Does anyone have an idea how this might be fixed? What's going on? Thanks for your help.
Update: Air Drop also doesn't work. Thanks.

Disconnect Device through Hotspot and can no longer connect

I recently disconnected a Windows 7 device through the "Connected Devices" option on the Verizon Hotspot. After disconnecting that Windows 7 device I am no longer able to connect through the Verizon Hotspot. I have removed and added back the hotspot profile in Windows 7 and can still not connect. I can still however, connect to other devices on the Verizon hotspot. I receive a simple error message in Windows 7 to verify the encryption settings even those encryption settings are properly set to WPA2. It appears that both devices appear to be out of synch. Has anyone experienced this with other Verizon 4G LTE hotspots? I generally just disconnect the device or turn off the hotspot when disconnecting however, I did not see any hard whatsoever in disconnecting the device through the hotspot "Connected Devices" option. Any help would be greatly appreciated as I need to get one of my business laptops that use Windows 7 back online..

If it's encryption Windows 7 is speaking of, make sure in the wireless adapter settings configuration that not only is on the correct WPA2 as you stated but the encryption matches, such as AES or TKIP.
Otherwise, removing the connection from the Preferred Wireless Networks list and resetting the device should allow a fresh new start.

Just updated KIES and can no longer connect my laptop and S4?

I've been using KIES for a year. Was just prompted to update it. Did so (to version 2.6.0.13091.9) and now I can no longer connect my laptop and Galaxy S4.
I'm getting the following message which is, of course, nearly worthless:
     Reconnect the device in Samsung Kies (PC Studio) mode.
     Current connection mode not supported by Kies.
     Check the USB settings.
     (Settings -> Applications -> Development -> USB debugging (x))
1) "PC Studio" has no actual meaning; after searching online I found what they're trying to tell me is the phone must be in MTP mode rather than USB debugging mode.
2) The Settings path above is wrong; I DID manage to find the proper path to turn off debugging & switch to MTP, but that doesn't help.
3) uninstalled & reinstalled KIES; no help
Any ideas?
I know 1000's of other people are having this problem, so I'm a bit surprised VZ doesn't have a ready answer here.

    Hey there mjr123,
I am sorry to hear that you are having issues with the Samsung Kies software. This is actually a third party application offered through Samsung, so I would recommend reaching out to Samsung's support team for the best assistance.
NicholasB_VZW
Follow us on Twitter @VZWSupport

I can no longer connect to itunes using the icon on my desk top.

my computer came with itunes which i used successfully but my nephew installed an other music program that i deleted and ever since then I can no longer open my itunes from the icon on my desk top. I just get the spinning circle for a few seconds and then nothing.

Hello Jpahlphoto!
I'm sorry to learn about the issues mentioned in your post. Let's fix this for you OK?
Please restore your iPad and see if that does the trick. You'll find the steps here:
http://bit.ly/16hQAlr
Thanks,
ChristinaB_VZW
Follow us on Twitter @VZWSupport

Installed Flash 10.2 and can no longer play Flip vidoes on Flipshare

Hi, I'm looking for some help please as have got very frustrated and wasted far too much time on this! Thanks!
I yesterday installed Flash 10.2 (specifically 10.2.159.1) and now can no longer play Flip videos on Flipshare. I had no problem with this on my previous Flash version (10.1 something I think), and also I don't seem to have issues with videos on other sites eg YouTube, BBC etc.
I am no expert but have tried everything I can think of. Have uninstalled and reinstalled (several times), have tried in Firefox (same problem), upgraded to IE9 from 8 (same problem), did a full Windows update for Windows 7 (same problem), added the site flipshare.com to my safe list (same problem), checked the Add On in Tools (it is apparently installed and Enabled). I am now out of ideas and would very much appreciate some help!
What makes this doubly frustrating is that I only installed 10.2 in the first place because I was trying to help my mum to install it over the phone so SHE could view Flip videos of our small baby (her first grandchild). She is on Vista and probably had a v old version of Flash which I thought was causing her problem (she could view them OK up to about a week or so ago), but now neither of us can play them!
Any help or ideas very much apprecited!
Thanks!!!
Lep 533

Many thanks indeed for trying to help!
Yes that is the right site, it's a site where you view videos shared by people with a certain type of video camera (a Flip).
Yes I can see the Flash animation on the login page fine, how odd ...
And yes when I right click a video that has been shared with me I can see settings and global settings (and in fact went in there to disable hardware acceleration, but when I did it made no difference). In fact I can see the first frame of the video and it also shows the video's correct length in minutes, but when you press play the screen goes blank and nothing happens. As I think I mentioned, before I installed 10.2 I could play the same videos from this site with no problem ...
Thanks very much again for replying, hope you can help further!
Lep 533

Installed firmware update, and can no longer connect to AE base station

I have an Airport Express base station and would like to connect to an existing wireless network.
I first attempted to change the AE base station to "client mode" in Admin Utility, but this option was grayed out.
I downloaded and successfully installed the latest version of the firmware, and I also did a factory restart. Now, Admin Utility recognizes the base station, but when I click "configure" and enter my password at the prompt, I get the following message:
"An error occurred while trying to access the base station. Make sure your network connection Is valid and try again. Error code -4"
Any suggestions would be greatly appreciated!

Try connecting your computer/laptop directly to the base station with an ethernet cable to one of the external ports and install your network settings. If it finds it there, it will find it after you've reloaded your network info to the base via the Apple Utility. Hopefully when you disconnect afterward, all will be fine. Be sure not to select "closed" network although Macs will login with no prolem, PC's have trouble doing so even with the network data stored in the internet settings.
Good luck!

After installing v1.0.5.2304, can no longer connect device to pc

neither the device manager nor the desktop manager seem to recognize the playbook anymore.
z: does not show up in windows explorer - I'm not getting prompted for playbook pw on the pc
the desktop manager is showing me an option to reset the device and is prompting me to reload the Tablet OS.
this is not sounding promising. i'm afraid it might have already wiped my playbook as - while it is still connected to the pc - I can no longer turn the playbook back on.
Any ideas folks?
Thanks.

Thanks for suggestion, TenNights.
So I backed out from that prompt to install tablet os, and then all of a sudden the playbook got connected. I was prompted for the pw on the pc, the z: drive showed up, and desktop mgr also was able to connect to the playbook.

I trashed a File and Can No Longer Connect

I trashed some file or something and now I can't connect to the internet. I have the 800MHz G4 (2.1) running OS 10.3.9. There was an icon of something mounted on my desktop that bugged me and I trashed it along with something or other else and lost connectivity.
What are the necessary files to have connectivity to the Internet? I was thinking I could download them on my other machine and load them onto the G4.
Thanks
Tom

Since you don’t know what files those were I would suggest that you do an Archive and Install to recover them. This will set aside your old system file and replace it with a new clean system file, while maintaining all of your other apps., data and docs. Clean and simple.
Follow the instructions here: Archive and install http://support.apple.com/kb/HT1710.

Upgraded to extreme and can no longer connect to xbox live

My old airport express died so yesterday I bought an airport extreme to replace it. I had no problems setting it up, my powerbook and powermac connect to the internet just fine. My ps3, wii, and apple tv all connect fine. However I lost the ability to connect to xbox live with my xbox360. Running the "Test Xbox Live Connection" test shows that it passes all the tests and is connected to the internet until it reaches the xbox live test where it fails. According to xbox support there are no current outages or problems with my account.
Since the only thing which has recently changed is the upgrade from airport express to an extreme it seems like that is likely the problem. I thought it might be a NAT or port thing but in the airport setup utility there are no options for changing either NAT or port settings.
Any ideas anyone? It looks like a year ago when the extreme came out there were problems between it and the xbox, but it also looks like they were resolved. Also they caused the xbox not to be able to connect to the network at all, which mine can do.
Thanks very much for any ideas or help. Otherwise the extreme is going to have to go back.

That's a drag.
I wish I could be more help, but I can not think of what the problem would be. I have mine connected to a network that bridges two AEBS to allow for a large area WIFI. I have no problems with either of the 360's connected. I have no special port forwarding or any settings changed to get the connection.
I also know that since I just replaced my main base station for an unrelated problem, that it worked out of the box both times.
I would say try direct connecting it. (the xbox) Not necessarily to correct the problem, but to isolate the AEBS as the problem. I would also try shutting down anything else that may be connecting so you only have a connection with your xbox. Again, none of this will probably solve your issue.... but you can get in contact with customer care or visit a genius bar.
In my experience if you can give detailed results to test you have already performed to trouble shoot, they are very receptive to replacing your product. Isolating the AEBS and saying you know t will connect direct, and that even when it is the only device connected.... it fails. I would also try both wireless and wired if you have both options.
I know it is not the optimal answer.... probably a pain.... but sometimes things just work kinda goofy. I know the stuff works and works great when it does... but I have had my share of issues with apple hardware. The good news is they have never failed me when it comes to taking care of it.
Good Luck !!!
Message was edited by: Dan Jay - Minneapolis

I've installed a Belkin router and can no longer connect my MacBook to the HP Photosmart printer.

Similar Messages

Maybe you are looking for