I've installed a system update as requested, 10.6.7 but mail is not working now.

I've installed a system update yesterday as requested, all software works fine, except Mail - I get the following message You have mail version 4.5 (1084/1082), it cant be used on Max OSX Version 10.6.7 (Build 10J869).  I've done a complete reinstall of my imac too, but this has not cleared the problem.
Please help

Please do this:
Repair the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and quit the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Upon satisfactory completion boot from your Snow Leopard DVD and resinstall Snow Leopard. Upon completion you may wish to update it to Mac OS X 10.6.8 Update Combo v1.1.

Similar Messages

  • After updating iPad to ios5 safari, YouTube and mails is not working can anyonehelp?

    EEe

    I tried this but did not work my you tube safari and play any Vedeo  updating any apps is not working , but iam able to use Skype Vedeo chat mail send and. Receive on the registerd. Email I'd

  • I'm trying to update my 4s to ios 7 but it is not working. I only have ios 5, is that bad?

    I have ios 5, and have been trying to update to ios 7 but a message pops up saying it is unsuccessful. Do I need iOS 6 first? Why isnt it working?

    no
    take your phone
    connect it by cable to your computer
    start itunes
    navigate to the iphone in itunes on the computer
    click on the check for updates button in the content panel

  • I updated to ios 5.1.1 on ipad2 but Messages is not working now

    I updated my ipad2 to ios 5.1.1. and am having problems with Messages. It opens but will not send messages

    Reboot your iPad:  Press and hold BOTH the poswer and home buttons at the SAME time for about 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart.  ONce it comes back up, see if you can send messages.

  • I have updated my BRE with new rule but it is not working.

    Hi All,
    I have got a requirement to add one more rule into my existing BRE.
    Below are the points that I followed :
    1).Firstly, I created the new version for my BRE , and added my rule in that.
    2). Then I un-deployed the previous version of BRE and Deployed its new version.
    3). I did restarted host instances and Rule engine service also.
    3). Now, when I am testing the sample consisting of previous rule then it is executing,
    But on the other hand when i am testing the sample based on my new rule then BRE is not working.
    If BRE is Executing with previous rule then i believe it is working,
    Then why it is not working for my new Rule .
    4). When i am testing my policy then it is also working well enough .
    Note : The Schema path is also correct ,
    Any help and suggestion will be appreciated
    Kind Regards
    Rishi Gaur

    Hi Shankycheil,
    1). My policy version 1.0 was having 10 rules.
    2). Then i copied version 1.0  and added it to my new version 1.1 .
    3). Than i added my rule to it only.
    After all this I Undeploy version 1.0 and deployed my new version 1.1.
    In Admin console I am getting error like you mentioned   somewhere about policy not found?

  • I have just installed LION OS but mail is not working. It says it is not the latest version? How do I install it and any other programs that did not make the upgrage?

    I believe there was an option to upgrade Mail and a couple of other things but I opted to not do it. How do I make sure I have all of the latest Lion software? Mail will not open because it is evidently Snow Leopard.

    Ha! Sorry, I meant to type upgrade!

  • Since I have updated IOS 6 my mail does not work, it keeps telling me my user name and password is incorrect.

    Since I have updated my iPad to iOS 6 my mail will not work, so I deleted my account and added a
    New, now it says my username and password is incorrect.  But my username and password are correct.
    Does anybody have a solution?

    May be something here.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • Hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock.  Looked in applications and the mail application is missing. Any thoughts?

    I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock.  Looked in applications and the mail application is missing. Any thoughts?

    Thanks Paul; but, taking your suggestion didn't solve the problem.  As mail is part of the OS, the updates don't have the capacity to reinstall applications; so, I had to reinstall the OS.  I now have my mail back (although it didn't appear on the dock--I had to go to applications and activate it and then put it back in the dock.  Thanks again for trying.

  • After installing the notified update I am unable to send e-mails (using O/E on XP) as my system is supposedly unsecure. (I receive a message saying "... Secure(SSL): No, Error Number: 0x800CCC0F".) Everything was working fine immediately before I updated.

    After installing the notified update I am unable to send e-mails (using Outlook Express on Windows XP) as my system is now thought to be Unsecure. (I receive a message saying "... Secure(SSL): No, Error Number: 0x800CCC0F") Everything was working fine immediately before I installed the update. Can anyone (pleeeease) tell me where Flash has changed my security settings as I have looked at the setup, but everything looks okay. Thankyou!

    Branching this to a new discussion as it appear you are facing difficulties with the installation or running the programs you have been downloading and installing.

  • Dv7-6059eo, microphone and camera not working, have re-installed the system, updated drivers etc.

    Hello. A couple of days ago, my microphone and camera suddenly stopped working. When I started up my camera in Skype, it said "Please open YouCam" or something like that, and when I did, it told me to update it. So I did. Then it told me that I had to uninstall the current version of YouCam. When I did and tried to install the update, it said something like "no video device detected".
    After updating drivers and un-/installing things, I recovered my whole computer to fabric options. Still not working. So I suspect that it might have something to do with the hardware. Although I don't know what should have caused it, as it just happened randomly in the middle of the day.

    Brad K59 wrote:... Photo Booth cannot recognize my built in Mac camera (ISight)...
    iSight camera failure after OS X 10.9 Mavericks update
    Brad K59 wrote:... I am missing the com.apple.photobooth.plist file ... how do I rebuild the file? ...
    Try the User Tip suggestions first.  Your system does need a plist, but a properly working OS X automatically generates any needed plist files when you launch the associated app (if its plist does not already exist.)

  • Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list

    Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list- what can I do?
    Operating System OSx Yosemite IMac.

    What exactly does "not recognise" mean, Kathy?
    You're on Mac (thanks for providing that detail): are you getting a "could not be read" message? If you are, it's a write permissions issue with the destination. Change the permission, and all should be well.

  • I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

    I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
    Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

  • HT1222 I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!!!!!!

    I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!

    Paldeng, thanks for the suggestion.  I've done all that.  I can connect to the server, but apparently they are not recognizing my ID and password.  I can use the server program if I don't go through Mail (using the same ID and password).  My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do.  His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume).  We can receive email in Mail, we just cannot send.
    I contacted my service provider, and we went over my connections.  They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired.  Apple swears it is not their problem, it is the provider, so here I sit.  My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely.  The thing is, we had not messed with any of those settings, so what changed?  I just did not want to bother my son again, as he has many other demands on his time.
    Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard.  I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update.  Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections?

  • I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. An

    I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. Any help out there?

    Hi
    Sounds like you may have moved the RMX library folder?
    Is RMX fully updated (for Lion)?
    Check your hard drives for a file called SAGE:
    It (or an alias of it) is normally found in the <USER>:Library:Application Support:Spectrasonics.
    Note that on Lion, the <User> Library is 'hidden'... quickest way to get there is to hold down Option (Alt) whilst using the Finder:Go menu
    CCT

Maybe you are looking for

  • How to see inserted rows using load csv data

    Hey all... I am using apex 3.1 and I want to know how can I see non failed rows when I insert data from an CSV file. the failed rows that I can see are the the ones that shows in the next case: Uploading data that already exists and having a primary

  • OVi suite do not reponding !

    OVi suite do not reponding ! and if it repondet do not  find My N86 ! even th PC do not find it.. and ! i Have the V30.009 and i dosent have the face detectin !! ...  plzzz hept mee !!,,

  • USER Wise UDFs

    Dear All, I have created for example 20  UDFS in marketing document. Out of this i have set 10 UDFs for Sales order to user A. Can i copy the same setting to User B for sales order. Since manually loging in to respective user and setting UDF consumes

  • Firefox is often "unresponsive";what is 'unresponsive script?why is firefox so SLOW in response to my site requests?

    A friend installed Mozilla Firefox for me about 3 months ago to replace Kaspersky which always slowed my computer responses. Now Firefox is slow at responding to looking for my e-mail, at searching for info, and often the message"NOT RESPONDING" foll

  • Connecting A Keyboard With a MIDI Cable

    I have connected my keyboard to my laptop with a MIDI cable, and the sustain pedal makes a noise throught the computer whenever I push it down. What to do?