I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help iPhone 4, iOS 6

I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help
iPhone 4, iOS 6
The ringtones are working but all other sounds are not working please help

I had this problem on my iPod Touch 4g. Just press the home and sleep button. Wait and it will give an iTunes and cable logo. Now you can put in DFU mode (Hold Sleep and Home button 10 seconds and then release the power button kand keep pressing on the home button.) Now you will be able to restore it in iTunes.
If you didn't sell it in al this time

Similar Messages

  • HT4623 I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help

    I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help

    Until you have tried Maps, Music, etc. first hand, I wouldn't formulate negative opinions about them. And updates, if performed correctly, do not erase data.
    I presume that last time you updated through iTunes. This time, update over Wi-Fi by going to Settings > General > Software Update.

  • Since the latest apple update, voice navigation has gone away.  Tried the Airplane mode fix, which worked, but now my bluetooth won't work in my vehicle.  What's up?

    Since the latest apple update, voice navigation has gone away.  Tried the Airplane mode fix, which worked, but now my bluetooth won't work in my vehicle.  What's up?

    Well Bababooey if you're comparing yourself to a Apple Genius Bar then you should already know my answer, your snarky remark get a snarky reply.  Why would I go to a salesperson to fix my computer problem when I can go directly go to the source itself.  I used to sell Apple computers over 8 years ago and was apple certified before the Genius bar existed. If I am to go about fixing an issue I can't fix on my own I will go to the source itself meaning Apple's programmers and developers - being UI UX Developer myself I know they should have QA'd all platforms and troubleshooted any arising issues. 
    This was also the first time in the 20 years I've been using a Mac that I even attempted to go on this forum which i thought would put me in connection with a certified Apple representative.  This turned out to be a complete waste of time just being a public forum with no Apple employee involved.  I was hoping to find a quick fix but in turn I was only frustrated with stupid responses such as yours that were in no way an answer to my original question. 
    BTW I fixed the issue on my own and without your help or Apples help. I'm glad if all forums point here regarding this issue because I now have the answer. The answer I was looking for from someone earlier was as simple as this {Download Maverick and reinstall the platform - it will take an hour to do but afterward 10.9.2 was installed and my computer is now able to shutdown and restart without having to do a hard boot.}  No more software update bar at top and no problems with my drive which I told both you and Grant - I know my computer better than you and I've probably been using them longer than you. 
    So again Babowa you were so wrong...... and I am right.
    Again anyone having the same problem, I suggest reinstalling Maverick and you'll be suprised 10.9.2 will work fine.

  • TS1609 im trying to install itunes on windows vista sony vaio. It  goes through the whole process then says administrator has settings to prevent this installation. Any help would be gret

    im trying to install itunes on windows vista sony vaio. It  goes through the whole process then says administrator has settings to prevent this installation. Any help would be great

    Try the following user tip:
    "The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

  • I went on Itunes to install new software and backup. I has been running all night and still saying preparing Iphone for restore. How long is this suppose to take?

    I went on Itunes to install new software and backup. It has been running all night and still saying preparing Iphone for restore. How long is this suppose to take?

    Preparing your iPhone for restore its supposed to be about 1-2 minutes! Do you see any errors the time you plug in the wire from your iPhone to iTunes?

  • The start page tells me i am not using the latest version however the ABOUT says i am up to date with 6.0

    You're not on the latest version of Firefox. Upgrade today to get the best of the Web!
    About Mozilla - Firefox Support
    i downloaded the latest version and reinstalled

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    See also these articles for more suggestions:
    * https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    * http://kb.mozillazine.org/Preferences_not_saved

  • I "erased Iphone" my iphone 3g and now it is showing me "Apple(logo)" on the screen only.I remember that i clicked on "erase iphone" while resetting it.should i install it's software again? it has been taken more than an hour .any help please

    i reset this from here
    it is like this since night.

    Hi nauman238,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    You might need to use recovery mode if:
    The Apple logo remains onscreen for several minutes with no progress bar.
    Happy New Year!
    - Judy

  • I have just updated my iphone 4s to the latest software and synced it with itunes. All my music was previously on the phone, but now many tracks seem not to be on the phone, despite the track title showing up. How do I get them back on the phone?

    Music missing from iPhone 4s after update to IOS 8.3

    Please, make sure you follow these instructions: Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support
    Or, if you use Wi-FI to sync music, make sure you have it enabled on your phone and wait till all the music tracks are synced.
    To set up syncing over Wi-Fi, follow these instructions: Sync your iPhone, iPad and iPod touch with iTunes using Wi-Fi - Apple Support

  • Since the newest hp update, my sound has gone completely silent. any ideas?

    I have an HP Pavilion g6 and I just updated with an unknown update (it doesn't show in my "View History") so I'm not entirely sure which one it was, but since then I've lost my sound completely. I'm about to update my sound driver, but in the mean time, does anyone have any ideas?

    Hi, Megan:
    Try a hard reset of the notebook first. Info on how to do that is at the link below.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01684768&prodT...
    Paul

  • The sound has gone from my iPad3.

    If have checked all sound and volume settings. I have rebooted 3 times. I have read other solutions to similar posts and nothing is working. No music sound or no video sound. The alarm is the only sound I can hear.

    If the sound only works through the headphones, sounds like either the speakers or dock connector port are faulty.
    If you don't get a volume level bar when pressing the volume buttons, the iPad thinks it is sat on a dock or connected to an audio source via cable and it is routing audio through the dock connector. Check for any sign of dirt, corrosion, bent pins or liquid damage (there's a small red dot appears in the port if any water gets in).
    If you do get a volume bar (or if you do but there's no signs of dirt, damage, etc), the speakers simply aren't working. This would most likely be down to corrupted settings as the alarm alerts are still working, in which case try Settings > General > Reset > Reset All Settings and if that still doesn't work, sync everything to the computer and restore as a new device using iTunes on a computer and test to see if there is any sound.
    If it still isn't working, it's hardware and needs service/replacement.

  • I have an iphone 4, with ios 4.3.3. I want to update it but when I connect it to itunes it says that it is the latest version of the software. So I cannot update it, and I need it very bad. Can anyone help me?

    I have an iphone 4, with ios 4.3.3. I want to update it but when I connect it to itunes it says that it is the latest version of the software. So I cannot update it, and I need it very bad. Can anyone help me?

    What version of iTunes do you have installed? If you are trying to update to iOS 6 you need iTunes 10.7 or later.

  • HT4972 I have just updated my iphone 3gs to the latest software however it wont activate the phone now. What can I do? Need a reply ASAP. Thanks

    I have just updated my iphone 3gs to the latest software however it wont activate the phone now. What can I do? Need a reply ASAP. Thanks

    If you are experiencing Activation Problems because your Device has been Hacked / Jailbroken / Modified...
    Then... Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743

  • Hi, I can't access my iTunes store even though I had updated to the latest version of the iOS. It always shows "the request could not be processed" when I tried to access the iTunes store. Pls help..

    Hi, I can't access my iTunes store even though I had updated to the latest version of the iOS. It always shows "the request could not be processed" when I tried to access the iTunes store. This has been going on for the past 3 days already. Pls help..

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

  • Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

    Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.  How can I fix this?
    Thanks
    [email protected]

    What is your operating system?  Reader version?

  • I have tiger 10.4.11.  In order for my computer to recognize my new Iphone I need to install the new iTunes, however the new iTunes will not download on my computer because it is not 10.5 or higher.  Is there a way that I can upgrade to leopard?  Help!!

    I have tiger 10.4.11.  In order for my computer to recognize my new Iphone I need to install the new iTunes, however the new iTunes will not download on my computer because it is not 10.5 or higher.  Is there a way that I can upgrade from tiger to leopard?  Help!!

    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
     Cheers, Tom

Maybe you are looking for

  • FINAL CUT EXPRESS HD

    AFTER INSTALLATION THE PROG DOES NOT START BUT SHOWS ERROR "AGO GRAPHICS CARD" IS MISSING

  • HT201303 I forgot answer my security questions plese help me

    i forgot answer my security questions plese help me

  • Release strategy for no determination

    Hi guys, I have a release strategy for PR that is determined based on the cost center, regarding the account assign. ctg. and the cost center. The problem is: when the release strategy is not determined - most of the times, it happens on the creation

  • SoD Risk Summary and Rule Text Files for CC 5.1

    Hi, Could anyone share with me where could I find the SoD Risk Summary and Rule Text Files for CC 5.1? I have looked into SAP Marketplace but I was not able to find such information. In the installation files we downloaded, these files are not includ

  • No Sign of Compressor files in preferences

    I have been having trouble with compressor since sometime in the spring (Mac OS X V10.5.5) I had been trying all of the suggested fixes (pacifist and all of that) Then i just gave up on it. I am back to trying to work with it and was going to trash t