**I've installed Windows 7 through bootcamp on the new 2012 iMac now I have no network drivers or graphics drivers to run aero! Help! **

**I've installed Windows 7 through bootcamp on the new 2012 iMac now I have no network drivers or graphics drivers to run aero! Help! **

I have been through it again and at the end it came up with the error:

Similar Messages

  • Does installing windows through Bootcamp effect the speed of the laptop when running OSX

    My friend and I are having an argument about wether installing windows 7 on your macbook pro through Bootcamp (early 2011) will slow down your laptop even when it is just running OS X (I think it wont)

    The Windows partition use NTFS (http://en.wikipedia.org/wiki/NTFS). NTSC is a television standard used in North America (http://en.wikipedia.org/wiki/NTSC).
    Mac OS X does not use FAT, but HFS+:
    http://en.wikipedia.org/wiki/HFS_Plus

  • HT1461 I created a partition and installed Windows through bootcamp. But I need to increase my partition size due to me needing more space on the windows side. Can I do this with bootcamp, and how do I do it?

    I created a partition and installed Windows through bootcamp. But I need to increase my partition size due to me needing more space on the windows side. Can I do this with bootcamp, and how do I do it?

    Welcome to Apple Communities
    You can delete the partition in Boot Camp Assistant or use Camptune to modify it

  • Can you use and iso version of windows 7 64 bit to install windows through bootcamp?

         I saw windows 7 64 bit online cheap and it was and iso. If I put it on a disc, could I use it to install windows through bootcamp?

    You can use the iso direct from Bootcamp assistant and put it on a USB if your Mac has the ability to boot from a USB flash drive.
    If your Mac has a built in cd drive you will need to burn the iso to disc (as an image) and use that to boot from.

  • If I use a USB stick for time machine, will I be able to install Windows (using bootcamp) from the same USB?

    I have a 64GB USB Stick, and I am interested in usign it with time machine. My question is, firstly, is this possible? And secondly, if I do do this, would it be possible to install windows using bootcamp from the same USB. My mother refuses to let me install windows without a backup of Mac OS X, so I really need to know if this is possible???

    You need to use a drive that is larger than your Mac's internal drive for Time Machine, so a USB stick will not work.  You need to buy an external hard drive.  It's worth it. Time machine is a fantastic backup system, keeping not just a single backup, but multiple versions of your files as well (hence the need for a larger drive).

  • Will the new 2012 iMac support 2 hard drives (HDD and SSD) like the 2011 iMac?

    Will the new 2012 iMac support 2 hard drives (HDD and SSD) like the 2011 iMac?

    Well, I'm not sure how anything can fit into a 5 mm depth, so I can see why they've removed the CD drive -  there probably wouldn't be enough room for the laser, LOL. Can't imagine speakers, hard drive (of any flavor), logic board and so on and so forth. Fortunately, my iMac has Applecare through early 2015 so I'm set for a while; I may check out a Mini at that point - saw that it is configurable with a fusion drive, which would make it interesting for me.

  • Has anyone seen the new 2012 iMac in any Apple stores yet?

    I was told by an Apple store employee that they would have the new 2012 iMac's in the Apple stores with-in a few days of their launch announcement, back in late October .... here it is late November and the new 2012 iMac's are not yet in the Apple store, for display purposes, here in Rochester, NY.
    Last night I was again at the Apple store here in Rochester, and asking about the new iMacs. one of the employees now says they "may be out in December" some time.
    I'm very disapponted as a loyal Mac user for over twenty years (and even as an Apple investor). that Apple is announcing the launch of these new products, and then taking months for these products to show up for sale.
    I'm starting to think that it won't be until late January that I can actually be able to purchase one of the new 2012 21.5" iMacs ..... i've been waiting years to get a new "antiglare" iMac.
    Has any one actually seen one of the new 21.5" 2012 iMacs in one of their local Apple stores, on display yet?

    UPDATE: Dec. 6, 2012
    I was just over at the local Apple store loking at the new 21.5" iMac, and to be honest, I wasn't all that impressed. I have been waiting for over a year to upgrade my Mac, and had high expectations for the new 2012 iMac's .... but seeing and playing with one in the store .... the new one's may not be for me.
    Most of all I wanted to believe all the talk about 75% less reflections in the new iMac display, but while in the Apple store, I saw no real difference over the previous model ... and if so, it was more like 25% less reflections. Nothing that dramatic, certainly not like the "anti-glare" screens available in the 2011 MacBook Pro. Basically, my understanding is that the new 2012 iMac's use the SAME DISPLAY as the previous iMac models did. It's the LG "LM215WF3" display, same as those in the 2009-2011 iMac displays. The only difference in the 2012 display, is that they took out the small space between the outer glass and the actual screen surface to get the overall display thinner. It still has the basic "glossy glass" cover screen.
    The other disappointment was the extremely poor audio sound from the new iMac's built-in speakers. They just sounded so "tinny", even when playing with multiple iTunes "equalizer" settings. Again, disappointing.
    Looks like I'll have to research the possibility of buying a Mini-Mac and an older Apple 20" cinema display off eBay. Or pick up a late model 2011 iMac and get the Rad-Tech "anti-glare" screen film for the display (Ugh!).
    Being a graphic designer and art director in profession, I just can't understand why Apple has abandoned the "professional" market for these glossy displays in it's iMac line .... or at least STILL hasn't given us an option for a true "anti-glare" display.
    Is it just me, or are my observations on the new 2012 iMac being seen the same by others as well?

  • I tried installing windows using bootcamp and it didnt work properly, now neither is load.

    So i tried installing windows, it got to the point where you are on the windows setup after a reboot. I didnt have enough space on my mac so i pressed cancel and it shut down my mac. Now when i start it up it says "No bootable device -- insert boot disk and press any key" so i put in the memory stick i used and press all the keys and nothing happens, i even try restarting it with it in and taking it out and restarting it but the same message keeps coming up. I have no idea what to do, any advice?

    Two possibilities: As CellerDweller suggests, your computer is still set to boot from the Windows partition which it cannot. restart holding Option (also labeled Alt). The second is that you erased the Mac partition. If attempting to reboot with the Option key and selecting the Mac drive fails, restart holding Command R to enter Recovery mode. You can then run Disk Utilities to repartition the Mac the the GUID partition scheme and then format the drive as MacOS Extended (journaled). If you have a backup you can then restore using the backup drive. If not you can redownload the Mac OS.

  • Trying to install windows through bootcamp - now i'm screwed...

    Ok so bought my very first mac yesterday and it has been a joy for the first 48 hours...sarcasm. I was trying to install windows xp - sp2 on my mac that has the latest and greatest version of leopard on it. Used boot camp to set up partition and was prompted to insert windows installation cd...all seemed to be running smoothly...until: the installation "completed" said that it needed to reboot to complete installation and that if there is a floopy disk in drive a:, to remove it. (***? there is no floppy disk on macs anymore...) so my computer will restart and goes to a page that says to press any key to boot from cd...ok 1)if I do press a key it leads be through the entire installation all over again and then reboots and we start again with the press any key to proceed with installation part...or 2) don't press any key and the it says "disc error, rebooting computer". so I thought that maybe i should just use parallels instead of bootcamp until I could research a bit more, but now since i can't get the computer on, it won't eject the cd - and unlike a pc, there's no button to make it eject no matter what...tried holding mouse key while shutting down and rebooting and it won't budge...
    can someone please help me?? (btw - i'm writing from my problem-less pc)...i really don't want to regret the mac...

    I'm a new macuser too (2 weeks). Try this. Turn off the compter and then, restart and hold down the OPTIONS key. A menu choice showing a hard drive should come up on the screen (and nothing else), this is the mac hard drive. Click on the arrow below the HD and it will boot into the MAC OS. Then, eject the CD from the mac OS. I think that should work.
    I didn't have any problem with XP installation in boot camp, used a 32 GB partition (thats the max for FAT32) and used fat32 so I could access windows files with mac programs.

  • Is there any way I can convert a .exe file to .iso on my MacBook Air? I'm trying to install Windows via BootCamp but the download from Microsoft is a .exe file which does me no good.

    I'm trying to install Windows 8 via Boot Camp, but the download from Microsoft is a .exe file so when I go to create the bootable USB drive, it fails. I've read some of the other threads about this topic, but I want to know if there is any way to convert to .iso without having to find someone's Windows computer to borrow. Can anyone help?

    No. You would require a PC in order to run the executable which is an installer, not a disc image or an archive.

  • I'm trying to install windows through bootcamp but my windows 7 DVD is not recognized?

    I've been trying for ages and still nothing is working. I've spent £70 on this OS and right now it's been wasted. I've been trawling through forums and the manual and I still have no idea what to do. Someone please help!

    I've now tried unplugging all my usb drives, but even though I've now formatted my USB Stick to MS Fat and downloaded the latest Windows support software from apple on to it, when I insert my disc the computer still does not recognize the disc. This is the message I am presented with:  http://gyazo.com/454733761330896d5d214339142c3d95.png
    Do you have any other possible solutions?
    Thanks,
    Theo

  • HT5268 I down loaded the new update today, now I can't play my favorite card game..? HELP!

    I downloaded the new java update today, now I can't play my favorite card game : ( Why?

    I don't know.  But you should check to see if there is an update available for the card game.

  • Can the new 2012 imac be used for ps3/xbox?

    Hi, i'm looking at getting the new 21.5" imac and i'm wanting to know whether i could/how to use it as a monitor for xbox/ps3 somehow?
    I've looked all over to try and find out how, but all i seem to be finding is that the hdmi to mini display port adapters arent compatible with the thunderbolt models, so is there anyother way to do it? Thanks

    For a more definitive answer please read what Apple says in Target Display Mode: Frequently Asked Questions (FAQ)

  • I had the old version of Firefox, but when offered to download the new version of Firefox, I did so. After the download and the old version being gone, my system informs me that my computer is too old to support the new Firefox. Now I have no Firefox.

    I just want the old version of Firefox back.

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com
    For the full system requirements see http://www.mozilla.com/en-US/firefox/system-requirements.html

  • Last night i tried to update my iphone to the new version and now i believe i lost all my old files...please help me?

    Can someone please help me understand how I can get back my missing files on my iphone after the update?

    If no backups were made then your stuffed. Harsh reality unfortuantly and a perfect example of why you should BACKUP before any update/ restore. It takes 30seconds!
    Article HT1414 details these steps. Simplu stick that into apples search bar and it will give you the article.

Maybe you are looking for

  • I've lost the "Send, Reply All, Attach,..." etc bar and drop down options for New Messages and Forwarded messages. How do I get it back?

    I only get the option to "Send" etc. (either as an icon at the top of the message window, or in the messages drop-down menu) on messages to which I am replying, but not to new messages or forwarded messages. How do I get the options back?

  • Add a tab in vl01n

    Hi guys I want to add a tab in vl01n transaction. Plz help me out.

  • Stock summary report monthwise

    hi all, As per client requirement i need stock summary report. The closing stock value of report should tally with mc.9 tcode closing stock value for that particular month. I have one stock report, but its not the purpose of mc.9 If any body having w

  • -xopenmp option on Solaris on Intel?????

    Hi, I installed the latest c compiler on Solaris Intel. I thought OpenM was available there but it is not. Is there something wrong? Erling PS. A proof. cc: Sun WorkShop 6 update 2 C 5.3 2001/05/15 usage: cc [ options] files. Use 'cc -flags' for deta

  • Opening a mac jpeg on a PC

    Okay, so I have a PC and received a jpeg which was created on a mac and am unable to open it. When I try to open it, Photoshop just says "Failed to load photo." I've tried opening it with other programs and was wondering what I should do. Thanks.