I've iOS 5 beta 2 on my iPod. When i Start my iPod there's said...

..., that it's impossible to activate my device. iTunes told me that there's a mistake and that they can't comunicate. What can i do?

Are you a developer?  Then use the developer support channels.  If you're not a developer, you shouldn't have that firmware, and now you've found out why.  Marking your own answer as correct does not give you any points - it just discourages others from answering.

Similar Messages

  • Why do I have IOS 6 Beta 4 on my 3GS when doing a system update?

    Was going to install IOS 6, and I have IOS 6 Beta 4 ready to download and install.  Not too sure I want to do this.  How about other 3GS owners?  Are you seeing the same thing?  I could not find anything on the web that tells me what is going on.

    Please don't post here about beta software. There are confidential forums set aside for developers to use. Developer Forums. If you are a paid developer or seed tester then it's a violation of your NDA to post in these forums. If you aren't a developer or seed tester then you have an illegal copy.

  • If I'm running ios 6 beta 4, will I still my phone still recognize that there is new software available?

    I heard that ios 6 was released. I'm running the beta 4. However when I go to upgrade it already says I have the latest software. Since the beta isn't finalezed how do I get around this? Do I have to reinstall ios 5?

    you need to back up your iphone to itunes,
    then goto recovery mode
    1. with the cable plugged to computer,shut down phone, then keep power and home button pressed till u get to recovery mode
    2. itunes will detect ur phone in recovery mode.
    3. select recover and update
    4. restore backup after recovery/update
    voila.. ios 6 full version ;-)
    HTH

  • I attempted to updated my Ipod (4th Gen) to iOS 6 today on my computer. When updating an error occurred, it then said i needed to restore it so i did. It then came up with another error. Now, everytime i turn my ipod on, it asks me to connect to iTunes

    Today, i attempted to update my iPod (4th Gen) to iOS 6 on my computer. When it was updating it came up with an error, it then asked me to restore my iPod which i did. During this process it came up with another error. Now, everytime I turn on my iPod, it asks me to connect to iTunes. When i do this, it connects to the computer but doesnt show up in iTunes. How do i fix this?

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.

  • How to downgrade from ios 6 beta to ios 5.1.1

    I have an iPod touch so when i saw that there is an iOS 6 beta for every one but when i was updated it it was only for developers and of course i am not a developer so i want to restore it and when i connected it to the computer i cant see the restore button its just saying that your device is not registered with developer program register it i dont know what to do plzzz help me

    Then you will have to wait until iOS 6 is released to the public. "Stealing" a copy of the beta can, as you learned, create problems.

  • I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I wa

    I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I was informed that it may take 3 minutes to activate phone but was then presented with the screen 'Could not Activate iphone', this is because the activation server is unavailable. Can anybody shed some light on this for me?
    Many thanks

    Can anybody shed some light on this for me?
    Not here. iOS5 beta is only available to registered developers, and discussing it publicly outside of the private developer forums is a violation of the non-disclosure agreement you signed to access the beta.

  • How can I update my iphone from ios 6 beta to the regular ios 6?

    I currently have IOS 6 beta 4 and iTunes nor my phone will allow me to update. I want the additional features that were added. HELP!!!

    You might want to check out these two threads:
    https://discussions.apple.com/thread/5325838?tstart=0
    https://discussions.apple.com/thread/5369545?tstart=200
    This topic has been discussed ad nauseum, they might give you some ideas on how to deal with the changes.  Be sure to leave Apple your feedback on the matter: http://www.apple.com/feedback/
    Good luck!

  • Can't upgrade ipod touch to ios 5 beta 2?

    Hi everyone! I recently tried to upgrade my firmware from ios 5 beta 1 to ios 5 beta 2 (I have a developer account, paid the $99 and everything).
    The upgrade to beta 1 from 4.3.3 was pretty much flawless. When I tried to upgrade to ios 5 beta 2, it seemed to work until the last step, at which point the ipod touch was off and could not be turned on. When connected to a computer, it said it was stuck in recovery mode. I couldn't switch my firmware in Organizer any more, not even back to beta 1.
    I restored down to 4.3.3 again cause I figured it would wipe the whole thing and let me upgrade back to beta 1 at least. That much worked, I have an ipod with 4.3.3 on it.
    Now when I try to upgrade back UP to beta 2 or even beta 1 again, I get this error: "Could not allocate buffer (file exists)" and the ipod goes back into recovery mode, and I must again restore down to 4.3.3.
    What file is this, how can I delete it, and how can I upgrade again to beta 2? This ought to be the last time I need to upgrade with a wired connection, since all updates from Beta 2 onwards are OTA as far as I know.
    I was quite fearful of "bricking", but a friend who is far more familiar with the inner workings of the ipod touch than I am has assured me that since the computer detected it in recovery mode, it wasn't a lost cause.
    I was originally attempting the install from a slightly older version of Xcode, which is probably the root cause of this problem and I am now kicking myself.
    Thanks for the help!

    Please use the confidential forums created for this purpose:
    iOS 5 beta

  • How to restore audio in iOS 8 (beta 5) after requesting mic access?

    I posted this question over on StackOverflow before realizing that the AIR team might be working on a fix: http://stackoverflow.com/questions/25168882/air4-how-to-restore-audio-in-ios-8-beta-5-afte r-requesting-mic-access
    In a nutshell, requesting microphone input in iOS 8 will terminate all audio if it's done AFTER a sound has already been played, but not if it occurs before (sample code is in SO post).
    Apps were tested using an iPad 3 the Flex 4.6.0 SDK with AIR 4.0, and with AIR 14.0 - the same behaviour was exhibited.
    This poses serious problems for our apps, which are already released and being updated for iOS 8, so please let me know if this is a known issue, and if not, whether you're able to confirm from your side.
    Thanks!

    Yes, exactly the same flow on our side - interesting to know that it's FLV as well.
    My problem remains, though: in iOS 8, if I play a sound (via MP3, SWF, etc) and then check the mic, all further sound in the application stops indefinitely until I close/reopen the app. Since we need to record audio at various times in the app, this will cause a major problem for our users!
    I've added a bug in the hopes that someone can verify the problem: Bug#3801262 - Requesting microphone access in iOS 8 (beta 5) terminates all further audio
    Thanks!

  • How to go from ios 6 beta to ios 6 official

    Hey guys im already running the latest version of the iOS 6 Beta version on my developer iphone 4s 64 gb... Today the official iOS 6 release came out and im wondering if there is anyway i can upgrade to that without having to restore my phone... :|
    If so please do let me know... would save me a lot of trouble since my laptop isnt with me xD

    Since most of the apple tools are too busy making love to Tim Cook to help, here is the solution.
    1. Do a full backup of your  junk. Because this involves a system restore.
    2. Some people are reporting an error during this process, so you may need to put it into DFU mode. Instructions on how to do this may be found here. http://m.youtube.com/watch?v=x6FSHAp6fvk
    Yes, that's YouTube, don't get use to that site, because apple has removed it from ios6. They don't think the largest video website in the world should be viewable from a 500 dollar ipad with any reliability.
    3. iTunes should then ask you to do a restore. It will now download the updated ios6.
    4. Restore your junk.
    5. Seriously ask your self if you want a company this controlling building your products.

  • What happened to auto layout in iOS 6 beta 3?

    I just downloaded the newest beta version (3) of iOS 6. After I continued work on my projects, which uses auto layout on iOS, I noticed something was wrong. After about 5 hours of testing I figured out that the behaviour of iOS deviced changed between beta 2 and beta 3.
    It's very easy to see for yourself. Download the sample code from WWDC 2012 and find project called LineLayout. Run it in Xcode 4.5 Dev Preview 2 (bundled with iOS 6 beta 2) and then run the same project in Xcode 4.5 Dev Preview (bundled with iOS 6 beta 3). You get very different behaviour. The problem is that I couldn't find an explanation of this in the API diffs and I'm not sure if it's a bug or a desired (though changed) behaviour.
    Thanks for any advice. I suspect this must have happened to a lot of people who are already using auto layout in iOS apps.

    brantwedel did you notice the post was made over a year ago when iOS 6 was in beta.
    brantwedel wrote:
    @KT, you are destroying the usefulness of google search, by recommending generic question like this be answered confidentially, lol

  • HT201210 I had the ios 7 beta and now I cant figure out how to get the real update

    I have the IOS 7 beta currently on my phone however now I can't figure out how to get the real update

    Be sure to log into developer.apple.com using your developer ID. there should be support on these issues.

  • Today, I updated to iOS 6 beta 3. iMessage won't activate and facetime too what do i do

    Today, I updated to iOS 6 beta 3. iMessage won't activate

    Why would you install a beta release...that was only available to registerd developers...when full public release is easily available?

  • IOS 5 beta messages won't sign in

    I have decided to use the new IOS 5 beta. From what I've seen, the brand new application i messages works on IOS 5 beta. I updated my third generation iPod touch to the new beta software on iTunes 10.3. Ounce I had finished setting up the new software, I messages wouldn't let me log in. It would say bad connection even tho it was perfect. Please help.

    Hi,
    Some of this is to do with how fast an App can "wake" compared to how fast the Mac can re-establish the Internet connection.
    The only clear method is to either use the Messages/iChat menu > Accounts and Untick then re-tick the ones you want to Login (fully) or the same Menu > Preferences and Untick "Use this account" then reselect to Login (Again)
    10:48 PM      Friday; March 9, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Running iOS 7 beta 3, I've noticed decreased Verizon service coverage.

    I'm an iOS developer and thus am running iOS 7 beta on my iPhone 5. Once thing I've noticed which may not be directly OS-related is a notable decrease in service coverage. Places where I previously had 3/4G, I now have one or no bars. This is widespread and consistent since the upgrade from iOS 6.
    Obviously this could be an OS-related problem, but I just wanted to check whether there is anything on Verizon's end that might be throttling down connections from the beta OS.
    Any information would be greatly appreciated!
    -Dan

    Either do a reset or reset network settings.
    reset: hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    If that doesn't help. settings - general - reset - reset network settings.
    You will not lose any data doing both of those suggestions.

Maybe you are looking for