I've just bought 2do and cannot get wifi to work!

I just want to be able to sync data with the 2do app and my pc.I have a Lenovo r61 pc running windows 7 and office 2007. I cannot get my iphone 3GS with ios 4.1 to connect via an AD-Hoc wi-fi set up. I haven't had to use wi-fi much so I do not have a lot of experience with it.

wi fi just worked i don't know what i did different but it now is working just fine.

Similar Messages

  • Help - I just purchased CS6 and downloaded onto the new iMac I just bought. I cannot get it to open

    I just purchased CS6 and downloaded onto the new iMac I just bought. I cannot get it to open. I think I may have purchased a windows version in error.  When I clicked on "DesignStandard_CS6_LS16.exe I am told the application can't open because Microsoft Windows applications are not supported on OS X.  Does anyone know how to contact Adobe directly?  I keep going around and around on their site and have found no e-mail or phone number to contact them to get this straightened out.  Can anyone point me in the right direction? Thanks so much out there for any assistance!

    Trying to contact Adobe over the (long) weekend is not likely to get you very far.
    Please see Return, cancel, or exchange an Adobe order -
    http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  • I have an old itunes gift card and cannot get it to work.

    I have an old itunes gift card and cannot get it to work.
    Any suggestions?  It's about 10 years old.
    Thanks,
    BuffalomarkM

    Can you provide more detail than just "doesn't work"? What happens when you attempt to redeem the card?

  • I've downloaded and installed flashplayer five times and cannot get it to work

    I've downloaded and installed flashplayer five times and cannot get it to work.  Each time I go back to espn3 it tells me to install a new flashplayer.

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/thread/1195540

  • I bought AdobeAcrobat XI and cannot get it to work on my new Windows8 computer - please help or give me a refund.

    what is this page for - I am looking for help.

    What exactly means "cannot get it to work"?  What happens when you try?
    Also, what is your installed Acrobat XI version?

  • I am trying to install Appletv with an iPad2 and cannot get Homesharing to work

    I am trying to install Appletv with an iPad2 and cannot get Homesharing to work

    Homesharing only works with computers. If your using an ipad you want to use Airplay instead.
    http://support.apple.com/kb/ht4437?viewlocale=de_de&locale=de_de

  • TS1702 I have installed a new version of an APP (mViewer).   This app allows me to view security cameras in my office when I'm away.  I've tried istalling it several times, put in all the information, including passwords and cannot get it to work.?

    I have installed a new version of an APP (mViewer).  This app allows me to view security cameras in my office from anywhere.  I've tried installing several times, put in all the information, including passwords, but cannot get it to work either on my iPhone or iPad. Is anyone familiar with this app?  Thank you.

    I don't know this app, but I did look it up in the iTunes Store, thinking I would suggest you could visit the developer's (vendor's) site and seek assistance there.
    But when I found the app and went to the vendor's site, I found garbage (nothing useful).
    Oh well.

  • I have the new i-pad and cannot get signal at work.  My original i-pad did not have this problem

    I have the new i-pad and cannot get a signal at work.  My original i-pad did not have this problem.  Any clue?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • I cannot figure out how to get Pro to download. I bought it, and cannot get to any olace that allows me to enter my code...this is nuts!

    HELP!!!! I cannot get Pro to load...or even get to a place wehre I can eneter a code number to install it! ELP NOW!!!! I have a Windows 7 operating system and am about to go nuts with this. I have never ever seen anywhere that you bought a program and it didn't just intall and start!

    Instructions are supplied with the registration code in the purchase confirmation email sent to you by Apple.
    1 install Quicktime player
    2 purchase QT Pro registration code
    3 enter QT Pro code
    How to install QT code

  • Iv got a new macbook air. and cannot get it to work on my iMac? can anyone help??

    Iv just bought a macbook air external dvd drive. and i cant get it to work on my imac? Can anyone help???

    I don't believe the "Apple MacBook Air SuperDrive" is advertised to work with anything except a MacBook Air or a Mac Mini.
    According to a MacWorld article, the reason that it won't work on other models is not a hardware issue, but a Mac OS X one.  The MacWorld column described modifying a kernel extension file (dicey; a good way to make your Mac non-bootable if you mess it up); readers suggested a method that involved modifying only property list files.'
    I'm not sure I believe that it is just a software issue, or a "what is Apple willing to test and support?" one.  At the very end of the page, someone reported seeing "Extra Operating Current (mA): 600" in a USB device tree report.
    I think this drive can draw more than the standard amount of power for a USB port.  The USB ports on the MacBook Air  (and now on the versions of the Mini that lack internal optical drives) have probably been designed with that in mind.  The USB ports on the other Macs may only be supplying standard amounts of power, which might (educated guess) be insufficient for some operations (like burning DVDs).

  • Lion 10.7.5 on a mid 2012 27" iMac and cannot get remote to work...

    I just bought apple remote, lovely. Only it doesn't work with my iMac. It works with iTunes on my macbook pro so doesn't seem to be the remote itself. Also I was assuming I'd be able to use it for all media that I'm streaming through my mac... Netflix, iPlayer etc. The more I read the more I get the feeling it is only supposed to work with content sourced through Apple. ie. iTunes and Apple TV.. is this really the case? Please help, I was looking forwards to being able to catch up episodes of Heroes, with the help of a remote!

    Okay, I managed to get remote connected to the iMac. Enable and pairing controls were in:
    system preferences > security & privacy > advanced
    iTunes and DVD's work.
    Now I'm interested if there is some way of getting it to work for browser streaming content like iPlayer and Netflix?
    Also, can it be used for keynote presentations?
    Thanks.

  • Hi, I've just bought a iPhone 3G and cannot get it to work.

    I can get the wi-fi to work but it says no service all the time.
    My friend that I bought it off said that he needed to get a porting code, for which he's done. My friend also said that its an unlocked phone so cannot work out the problem. Please help as I only have 2 days left before its my sons birthday and would rather give him a working phone.
    Thanks in advance
    Glenn

    Just found the following  info regarding non installation of iphone driver, do you know how I can get the correct driver reinstalled or updated
    I have saved a copy of the report as a Pdf File but dont know how to attach it to this message  do you have an email address I can send it to?????

  • HT204447 just downloaded itunes match, and cannot get it to work.  How do I cancel it

    I purchased itunes match in hopes that i could sync without connecting with computer.  I cannot even access it on my ipad mini, followed all installation instructions, and it does not show up.  I think I have had it for an hour and am just frustrated with it.  I am currently out of the country and wonder if that is part of the problem.  At any rate, I would like to cancel, and have not figured out how to do this.  Any suggestions...

    Hello pbdanner,
    It seems your iPhone isn't recognized in iTunes for Windows. The following article provides troubleshooting steps which may help you find a solution:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • Mi iPhone5 crashed and cannot get it to work.

    Hello The Room...
    When I wanted to check my messages I pushed the Start button and the screen shows really OVERSIZED words which sliding I found are: "Unbloque", and the opening window with the numbers to type my code.
    The screen is OVERBLOWN and I cannot make it smaller. Each word fills a quarter of the screen and I almost can't slide with a finger, when I do it slides back.
    I would really appreciate any help as is my only phone and I'm disconnected.
    Thank you very much indeed in advance!
    Cheers,
    Carlos
    iPhone 5 - iOS 8.1.3  - 32G

    Hi Carlos,
    Thanks for using Apple Support Communities.
    From your post I gather that your screen is zoomed in to the point where you cannot operate your iPhone.  I believe that the Zoom setting for Accessibility could have been accidentally enabled.  Since the iPhone is difficult to operate in its current state, you can follow the directions below to turn off the zoom feature using iTunes.
    Connect the device to any computer with iTunes.
    Select the device when it appears.
    Select Configure Accessibility on the device summary page:
    Select Neither to disable zoom:
    Click OK.
    iOS: Home screen icons are magnified or large - Apple Support
    Have a good one,
    Alex H.

  • New to Availabilty Groups and cannot get backups to work

    I tried to use SSMS 2014 maintenance plans to backup databases I am testing in an Availability
    group. I am failing badly.
    I have the Availability Groups set to "Prefer Secondary" on both the primary and the secondary. I created the same Full Backup Maintenance plan on both the Primary and Replica nodes. I tried executing the maintenance plans from both nodes.... they
    fail on both. I looked in the Server Log and see this message:
    From Primary
    ========
    BackupDiskFile::OpenMedia: Backup device 'J:\Backup\forms\forms_backup_2015_03_16_154013_0667087.bak' failed to open. Operating system error 2(The system cannot find the file specified.).
    From Secondary
    ==========
    BACKUP failed to complete the command BACKUP DATABASE forms. Check the backup application log for detailed messages.
    The Oracle guys feel you need to write a script and it cannot ne performed from SSMS.... has anyone completed this process. If so, please let me know what I am missing.
    Thanks!
    Charlie

    From Primary
    ========
    BackupDiskFile::OpenMedia: Backup device 'J:\Backup\forms\forms_backup_2015_03_16_154013_0667087.bak' failed to open. Operating system error 2(The system cannot find the file specified.).
    The Oracle guys feel you need to write a script and it cannot ne performed from SSMS.... has anyone completed this process. If so, please let me know what I am missing.
    Hi Charlie,
    Firstly, you can use SSMS maintenance plans to perform availability database backup on replicas. However, please note that there are some known issues with using the maintenance plans on Availability Groups as the ones defined in this blog:
    Maintenance Plan Does not Backup Database or Log of Database Defined in Availability Group.
    Secondly, regarding to above error message, besides other post, please also check that
     if you have the correct path for the backup files. You can run the following command to make sure you can see the file in the operating system:
    Xp_cmdshell 'dir J:\Backup\forms\forms_backup_2015_03_16_154013_0667087.bak'
    Thirdly, to implement effective backups on Availability Group, you can also customize you own stored procedure to backup the database and create SQL Server agent jobs on each replica. For more details, please review this blog: 
    Backing Up SQL Server Databases Participating In AlwaysOn Availability Groups.
    There are also some articles about configuring backup on Availability Replicas for your reference.
    Configure Backup on Availability Replicas (SQL Server)
    Active Secondaries: Backup on Secondary Replicas (AlwaysOn Availability Groups)
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

Maybe you are looking for

  • Multi Mapping 1:N Split

    Hi ,     My scenario is 1: n Split. I have created one intermediate structure (B) and doing splitting due to satisfy all business rules. A is the source is the Target. (1: N split) A  B B C A and B has the occurrence of 1. B has the occurrence of 1

  • Apple TV as a media player and karaoke

    I am thinking to get one as my media player and karaoke, can I switch audio from stereo to left or right mono? What format does it play? Quicktime only? Thanks

  • Query in Insert statement with JDBC Rx adapter

    Hi, This is a FILE to JDBC scenario. My target datatype is like this with sample payload values statement_s statement_s    action='INSERT"   access     A=1234     B=1002 key    A=1234    B ="10%"      compareOperation= LIKE A(1..1) is primary key in

  • Windows.ApplicationModel.DataTransfer. How share image and link in same post ?

    How share image and link in same post  ?

  • Mail account authentication

    Hi There, I am trying to set up mail on a brand new Snow Leopard server. I have configured it using the wizard on startup and it is running on my internal network. I have set up a user (me) with a password and I can log into the server to administer