I've just upgraded my Acer One S1001 to Windows 10 and realized that the sound is not working
Hi everyone! I’ve just upgraded my Acer One S1001 to Windows 10 and realized that the sound is not working. When I went to the support site, I found that there are no drivers for Windows 10 yet!! Only drivers for Windows 8.1 are available. Please provide the drivers for Windows 10, otherwise I’m not able play sound from my machine. Can someone please help? Thanks.
Try to install latest Realtek 2.79 version:http://www.realtek.com.tw/downloads/downloadsCheck.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false#High Definition Audio Codecs
Similar Messages
-
I went back to th shop and they want me to pay for a new one cos is no longer guarantee.It's umbelievable that a new iPad doesn't work and Apple doesn't give u back one standing the fact that is a production defect.
Whut can I do?It may or may not be possible to verify the usage of such a technology device. And where did you get the idea that it costs $10 to manufacture and sell an iPad? I think the parts cost alone was $260, not counting manufacturing, shipping, storage, retail space, salespersons, helpdesk support, all the other overhead costs, etc. etc.
With so many people out there trying to scam the system, it will be an uphill battle to try to convince anyone that you bought it and didn't open the box for 14 months. That's very unusual.
At some point, the store you bought something from (in this case it was Apple) has to say no. What if it had been unopened for 2 years, or five years, or 20 years? This is what the warranty period is all about. It starts on the day you buy it and ends at the end of the warranty period, regardless of usage.
I am sympathetic to your plight but if you are able to get a new iPad (refurbished would be more likely), it will be through the kindness of Apple going above and beyond. If you do not get one, it is not Apple's fault you waited this long and there is no requirement for them to replace it. -
I am trying to upgrade to itunes 10.7 using windows and keep getting the following error message: "Error writing to file: C:\Config.Msi\364460.rbf Verify access to this dierctory". Help!
Fixed! (win7 64 bit)! Just stop your antivirus during the upgrade/installation (I've got Kaspersky).
Good luck! -
Hi, please, anybody knows how many coolers has an iMac 27 Intel core i5? The widget iStatpro shows 3. I changed my HD (the previous one of 1TB crashed) and after that, the HDD cooler is constantly working at 4.600 rpm. Anybody is facing this problem?
Did you replace the HD yourself? If so what HD did you use?
You should be aware that the symptom you describe is likely to be because you've used an incompatible HD. The current Macs have the temperature sensor actually in the HD package, with a modified cable to connect to the logic board.
If the sensor is not in circuit, the fans will run full tilt all the time.
Also, if it was under warranty, I think you'll find you've just voided it. -
Hello everyone my iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my problem please
Hey Kirby17,
Thanks for using Apple Support Communities.
If you are not getting any sound from the speaker, follow this article.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Have a nice day,
Mario -
Upgraded to Mac OS X Snow Leopard and final cut express 4 will not work
upgraded to Mac OS X Snow Leopard and final cut express 4 will not launch but my final cut express HD 3.0 version comes up. I reinstall my final cut express 4 upgrade disc and it still will not launch.
Where do I go from here?You installed from the discs, right?
What happens when you try to launch? What are you doing to launch and what happens you do it? Can't see you computer from here. If you probably need to contact Apple with an installation issue on a new computer. -
Recently upgraded to Maverick and the version of iphoto does not work with it. How do I get and download the version 11? I can't find it anywhere
Which iPhoto? 9.4.6 and 9.5.1 work here.
FWIW, iLife '11 is available here: http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES -
"show my windows and tabs from last time" does not work after upgrade to 8.01
After I upgraded to the latest v8.01 I have lost all my tabbed sites and even when trying to add them and save them with the Tools>Options>General>Start up>when Firefox starts selected feature "show my windows and tabs from last time" it does not hold the saved sites and when browser is restarted it always loses all the tabs and only shows one tab with Firefox home webpage. I need to have several sites open to work and the only way to do that now is to make sure I click the "Use current pages" under General Option in Tools. It is getting very annoying because I keep changing my tabs to different websites during a session and I am used to just closing the browser, relying on having them all back in when restarting Firefox.
Make sure that you do not use Clear Recent History to clear the <i>Browsing History</i> when you close Firefox.
*https://support.mozilla.com/kb/Clear+Recent+History
*https://support.mozilla.com/kb/Firefox+does+not+ask+to+save+tabs+and+windows+on+exit
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Multiple_profile_files_created -
I have just update my mac mini server to OX Yosemite, but now the iTunes is not working at all.
I have just updated my Mac Mini Server (Mid 2011) to OS Yosemite ver 10.10, after the update, iTunes is not working, and i have tried to reinstall iTunes over and over again but it was not successful , please advise if you have a solution or share similar problems. Thank you.
You have to upgrade to 10.6.8 to be able to download iTunes 10.7 or 11. The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard.
The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion.
The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion. -
Yesterday I upgraded my MacBook Pro 13" (Early 2013) to 10.10.3. I immediately started having problems with it opening apps slowly. So I read and discovered it had replaced some of my apps with newer versions. I also restarted it 2 or 3 times. That seemed to solve that problem. This morning I get on and it is doing the same thing, but it is limited to the Calendar. Anything I try to do in the Calendar gets me the spinning beachball, from opening it to editing to adding an event. I have many dates and events saved that I don't want to lose. Am I going to have to reinstall the Calendar? If so, how can I do it without losing my content?
This is the note I sent to the other thread (Macbook is slow since OS X 10.10.3. I'm sorry. I hope this helps
I did not have a specific category that said "log list" once I got to "All Messages". It just showed "Log" so that is what I am sending you. The other thing is that the timestamp is 9:23:?? the next is 9:34:?? and the problem occurred at 9:32:??. So you are getting the log from 9:23 until it repeats.
Apr 13 09:23:49 -MBP com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Apr 13 09:34:43 -MBP hidd[96]: IOHIDEventQueue unable to get policy for event of type 11. (e00002e8)
Apr 13 09:34:47 --- last message repeated 83 times ---
Apr 13 09:34:47 -MBP spindump[1465]: Got xpc error message in libspindump client connection: Connection invalid
Apr 13 09:37:56 -MBP apsd[73]: Failed to initialize budgeting, not using budgeting: Error Domain=Timed out waiting for XPC and/or reply handler Code=104 "The operation couldn’t be completed. (Timed out waiting for XPC and/or reply handler error 104.)"
Apr 13 09:37:56 -MBP apsd[73]: apsd(73,0x7fff7a8d5300) malloc: *** error for object 0x7fd5e0c43ef0: pointer being freed was not allocated
*** set a breakpoint in malloc_error_break to debug
Apr 13 09:38:29 -MBP com.apple.xpc.launchd[1] (com.apple.Finder[221]): Service exited due to signal: Terminated: 15
Apr 13 09:38:29 -MBP kernel[0]: process Messages[57790] caught causing excessive wakeups. Observed wakeups rate (per sec): 115; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45001
Apr 13 09:38:29 -MBP com.apple.xpc.launchd[1] (com.apple.ReportCrash[57808]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash
Apr 13 09:38:29 -MBP ReportCrash[57808]: Invoking spindump for pid=57790 wakeups_rate=115 duration=392 because of excessive wakeups
Apr 13 09:38:29 -MBP com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Apr 13 09:38:29 --- last message repeated 1 time ---
Thank you for your times! -
One email account sends and receives emails, the other does not
I have two different email accounts set up on my phone. They both worked, until I had my phone was serviced and wiped clean. Now one account sends and receives and the other does not. I have tried everything from deleting the account on the phone and rebooting, to changing my password. When I reactivate the account I get a message saying "activation server" and that messages will be forwarded within 20 minutes and they never come. I'm not sure what else to try.
Hello dalite and welcome to the BlackBerry® Support Community Forums.
Sorry to hear you are having email issues.
What type of email are you unable to receive - Gmail? Hotmail? Internet Service Provider hosted email?
What is your BlackBerry PIN to investigate?
When you go to send an email using this account, do you get an error? Are you able to select this email account for sending an email?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
I just upgraded to ios7 on my iphone 4s and now have now sound when it rings
I have tried everything I can think of in settings. Now that I have updated to IOS7, I don't have any sound when the phone rings. How can I get this fixed?
Hey firestonov,
Thanks for the question. I understand that you are experiencing issues with sound after updating to iOS 7. To troubleshoot, let’s first restart your iPhone:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
Additionally, check to make sure your ring/silent switch is not toggled, as well as Do Not Disturb:
Ring/Silent switch - iPhone
http://help.apple.com/iphone/7/#/iph3bd01398
Ring/Silent switch
Flip the Ring/Silent switch to put iPhone in ring mode or silent mode .
In ring mode, iPhone plays all sounds. In silent mode, iPhone doesn’t ring or play alerts and other sound effects.
Important: Clock alarms, audio apps such as Music, and many games play sounds through the built-in speaker, even when iPhone is in silent mode. In some areas, the sound effects for Camera and Voice Memos are played, even if the Ring/Silent switch is set to silent.
For information about changing sound and vibration settings, see Sounds and silence.
Use Do Not Disturb. You can also silence calls, alerts, and notifications using Do Not Disturb. Swipe up from the bottom edge of the screen to open Control Center, then tap the Do Not Disturb button . See Do Not Disturb.
Thanks,
Matt M. -
Help upgrade to IOS-5 I get an Error message that the IPad can not be restored (1)
HI While trying to update my IPad 1 to IOS 5 I keep getting an Error Message (1) IPad cannot be restored
I had the same thing with my iPhone and iPad2 The solution for me was to unplug all usb devices except keyboard (make sure the iPad is connected direct to your Mac) restart your mac and then restart itunes which then restored and updated my Ipad etc is now fine. If you press the more information button on the error message it takes you to a web page with more trouble shooting options.
-
I just upgraded to a new computer running Windows 7 from an old one running XP. I would like to migrate my old bookmarks to the new computer but I do not know where to find them or where to migrate them to.
I do have the old computer's disk drive.
Thank You.See https://support.mozilla.com/en-US/kb/Backing%20up%20and%20restoring%20bookmarks
and
https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information?s=new+computer&r=4&as=s#os=win&browser=fx8 -
Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears:
"The licensing of the product does not work"
Fault 6
How should I proceed?
Have the program installed on only one computer.Download the Adobe Licensing Repair Tool.
Run the License Service Update.
Mac OS X 10.7 and above:
a. Double-click the LicenseRecovery111.dmg It will extract the folder. Open the folder.
b. Double-click your Hard Drive.
c. Double-click Applications.
d. Double-click Utilities.
e. Double-click Terminal.
f. Type sudo python
Note: There is a space following “python”. Do not press Return.
g. Drag LicenseRecover.py from the LicenseRecovery111 folder onto the Terminal Window and press Return.
It should look like this:
h. Enter your administrator user name and password when prompted and click OK.
(Note: the cursor will not move and you will not see stars or dots, just enter your password anyway.
i. Let the script run, it will tell you when it is finished. Quit terminal and restart Photoshop
Gene
Maybe you are looking for
-
What is the best way to copy a DVD I made from iMovie? It was HD720 and I don't want to lose any quality in the copies. I need to distribute it to about 20 people. It's 42 minutes long.
-
Smartform - Output window (Accept, Cancel, Print, Preview)
Dears experts, when i execute a preview of a Purchase Order, a message windows appears and you can select the diferents message( print, external send) and Accept, Cancel, Print or Preview. I want to do 2 things. - I only want to view Accept and Canc
-
I have iphone 4 factory unlock why not active 5.1.1
i have iphone 4 factory unlock why not active 5.1.1
-
Is there any option to select Desktop Software from various versions ?
Hi, I am using blackberry curve 9300 for more than one year. To manage my phone I downloaded and working with desktop software 5.x for my purpose. I am using Windows XP SP2 for my PC and it's working fine for all of my purposes. One week ago, I took
-
Is it possible to develop Flexsible reports in apex as Hyperion pivot?
dear friends Is it possible to develop Flexsible reports in apex as Hyperion pivot, Tree extendable, drog & drop report as in Hyperion interactive reports? regrards?