I've lost my audio in the project, after exporting

I exported my project, and then wanted to modify the project still further- which I did. Only to find that all of my own audio has disappeared- that is, the green tabs are still there in the timelines, but they don't play anymore. Only the Apple jingles and sound effects are still audible. Did exporting it close it down somehow definitively?
Any help gratefully appreciated.

This other thread contains the answer:
http://discussions.apple.com/thread.jspa?threadID=1682087&tstart=0

Similar Messages

  • I have a project on Imovie with pinned audio to the project. I want to know how to stretch the audio to a specific point of the song?

    I have a project on Imovie with pinned audio to the project. I want to know how to stretch the audio to a specific point of the song?

    See this Tutorial for how audio works in iMovie. In general, you drag the left or right edge of your audio clip.
    You can also use the Clip Trimmer. Click the Gear icon in the music track and select the Clip Trimmer.
    http://www.apple.com/findouthow/movies/imovie08.html#audioclips

  • Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you helpe me change this back please?

    Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you help me change this back please? Has anyone had this issue before?

        I'm sorry to learn that you have endured the audio issues outlined in your post for almost 2 years SusanLM1! This is certainly not normal! Let's get to the bottom of this issue, first please confirm your phone model; your mention that you have the iPhone 5 but your post is on the iPhone 5S forum. Also, share the iOS version currently installed on your phone. What is your ZIP code? Does this happen mainly while you make/receive calls from a particular location (home, office, etc)?
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

  • Hyperion IR 9.3.1 - Issue in printing the report after exporting it to pdf

    Hi All,
    I am facing a problem in printing the report after exporting it to pdf format using Hyperion Interactive Reporting 9.3.1. I have set page size of report section to 11X17 inch landscape. Now I am exporting this report section to pdf. Report gets exported to pdf with size 11X17 inch landsacpe. But when I am trying to print this pdf it is shrinking the documnet size to A4 size paper and printing it rather it should print it on 11X17 inch paper size. Please suggest if there is fix available for this issue.
    Thanks
    Ujjawal

    "File > Print Setup > Paper > Size" on PDF.
    I think this issue is only to do with the printer and not IR.
    I think the question now is "Can your printer print 11X17 pages or not".

  • Lots of my clips of videos have lost their audio in the event and project.

    I have been making a video using iMovie and when it started everything was fine and as it should be. I have been adding clips to the project and all seemed fine. Some clips get rejected and moved to the trash to clear some space on my hard drive.  I have just played the video back and lots of the clips have no audio over them, even though they did when they were imported.  The clips that have lost the audio aren't ones that have had parts rejected and I have tried all of the help topics that iMovie has to offer.  Can anyone help me work out how I can find these again because these clips are very important. Please help, I'm really not impressed.  Thanks

    The audio should still be there. Try opening the clip inspector to the audio tab and set the volume slider to 100%.
    Also, make sure you don't have the ducking feature in use. That will cause all other clips to be muted while the ducking is on.

  • I can't share the project or export it, when click on share nothing appear ? what can I do ?

    How acn I share or export the film project I made, because when my film is finish, I click to share, but nothing appear ?
    So why and what can I do ?
    I use Maverick the new one and imovie 10 for marvericks.

    DOWNLOAD SAFARI AND RE-INSTALL to fix maps in IPhoto Places '09  8.1.2
    I too lost my IPhoto Places maps on June 2nd.  Initially I used Best Buy's Geek Squad tech support.  The second tech was able to fix the problem.  He said there was a corrupt file in Safari, not IPhoto. However, I didn't know what he did to fix the problem.
    A week later, the maps were gone again.  I tried to contact the same Geek Squad tech, but no luck.  I talked to several other techs, but they could not find a solution, even though I told them about Safari.  The last tech directed me to this web page.
    It was here I learned about turning the WiFi off and on.  That restored the maps to the pictures, but not the Big map.
    Today, at the Apple Store Genuis Bar, I was told they were unaware of this problem.  When I mentioned that Safari was where the problem was, he suggested I download Safari from the Apple Web page and re-install.
    So far this is working!    So happy all of the maps after two plus weeks.
    I hope this helps others too,
    Peggy

  • Aggregator suddenly doesn't play all of the projects after updates

    I finished an aggregator project, checked it, etc.  It was working fine.  Then I downloaded some Adobe updates (Flash, Shockwave, Flash Player and Captivate 5), next thing I know, people are telling me that the project no longer works.  I open it up, test it, and the files from the 3rd on won't start.  They can be accessed from the Table of Contents, but they don't play. The playbar either doesn't move, or jumps back after a second. Nothing was changed in the files, I checked for pauses, Preferences options, nothing is set to pause/restrict playback.  Also, the 3rd file's skin shows options that were unchecked.  You can't move the playbar or skip ahead, but you can go back or forward to the other "frozen" files using the TOC.
    Another wierd thing is that sometimes when I reopen the browser, it starts from the 1st frozen file and the TOC doesn't work at all.  The swfs play fine when tested individually.  I ended up having to make separate .exe files and linking them.  Problem with this is that we need the htmls and when they are programed to open another project at the end, the original project doesn't close.  Because of the nature of our work, we need one file to move on to the other without creating clutter of multiple browser windows open.
    If anyone has encountered this, I would really appreciate some help. I have checked/changed internet settings, trusted site settings, system restored to before the updates, but nothing.  I even had a co-worker republish the files from his non-updated computer and it still doesn't work.

    You said you updated Flash player.  What major and minor version number did you update to?
    Were these projects originally created in Captivate 5 or an earlier version (e.g. Cp4)?
    When the files don't play at all, what do you see?  Is it a black screen?

  • Newbie, what to with the project after it's finished?

    total newbie here... I just finished my first DVD using FCE. Once you're done, what do you do with the project file and all the associated files?
    Is there a way to have everything archived into one folder (i.e., like InDesign's "Pre Flight" and "Package" features)?
    What happens if my source files are in different places on my computer, and after I archive it, I open it? Won't the mapping to the files be off, FCE can't locate them?
    PowerMac G5 Dual 2GHz   Mac OS X (10.3.9)  

    My back-up methods for FCE projects:
    1) I blow up all my Capture Scratch clips. I save the original DV footage, and since I am careful about my reel numbers, I can re-capture it later
    2) I copy all my other media: music, Photoshop files, LT projs, etc onto a DVD.
    3) On the DVD I also store my FCE project file and my iDVD project file if I have one. Also include any drop zone movies I may have made .. sometimes this eats up a couple DVDs
    Once I have all this, I can easily re-create the projects through Capture Project in FCE or by loading up the iDVD project
    I also record the Timeline of the FCE project to DV tape, to make copies, etc
    Also nice to save a Disk Image of your iDVD project, for later copies

  • Choosing the project after Authorisation of Change req.

    Dedar SolMan Gurus.
    We have this issue to be solved. When I authorize the change request and I have more than one project for one system landscape (component), than for creating a normal correction the system sometimes offeres me one or more projects. On what metters it depends? On the phase of maintenace cycle. If yes than this should be wrong. No matter what phase is, I want to at least develop changes. I do not have to release them. If there is another reason please let me know.
    When I am using u-gent correction the system let me choose even form the maitenace cycles in phas go-live (at least I think ).
    Thank you very much for you answers.
    Best regards,
    Petr Syka

    Hi,
    The selection of project and maintenance cycle depends on the ibase you are selecting. You should always select the target system's ibase and based on the transport route created to the target system, the project gets selected.
    In normal correction, your maintenance cycle should be in the phase 'Devlopement with Release ' or Developement w/o Release'. This is because you are using the task list of maintenance cycle. Normal correction does not have its own task list.
    You can create u'gent correction till your maintencnce cycle phase is 'Emergency Correction'. U'gent correction has its own task list,so its not depending on the maintenance cycle task list.
    Please revert in case of any doubt.
    Rajeev

  • RH9-change the name of the project after it's been generated & released as help site.

    I'm a novice non-programmer working in RH9 - client wants to change the name of the project that appears at the top of Internet Explorer.  The project has been generated & released to their internal website.  I've changes every file name I could find as well as the name in the title bar when you first generate it within RH.  Any words of wisdom &/or advice are welcome.

    It's not clear whether you are trying to do this the correct way which will require generating the help again or whether you are trying to change it just in the output on the server.
    The latter is not good practice as it will get forgotten next time you generate and you will be back to square one. If you must do that, then it should be as simple as changing the start page title. You will need a copy of the file from the server. Open it locally and change the <title>, then upload it again.
    The correct way is to go to Project Settings and change the name there, then regenerate.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Why won't the project manager export all of my media when copying to a new a folder?

    Trying to consolidate a project by using the project manager. It exports most of the files fine but some consistently won't copy to the new folder. Any idea what causes this? It's pretty frustrating considering I'm supposed to hand over a hard drive of the media managed project for the next steps in post very soon and would be a huge waste of time to search for all the individual files and copy them over manually.

    What version of Premiere and which Resulting Project option are you using (Collect Files and Copy to New Location or Consolidate and Transcode)? Also, are the files that won't copy a specific type of file or any other details, and does Premiere provide any error information (dialog and/or information in the Events panel)?

  • Billing for the projects after cutover

    Dear All,
    I have uploaded initial stock and Goods issue for the projects that are open in the legacy system.
    I want to know how to do billing through FI as i have done PGI for the open projects in the legacy system,i upload the materials through MB1A .
    Please advice.
    Muzamil

    try revenue reposting KBxxxx transactions

  • Audio sounding Dull & low - After export

    Hi there,
    I'm editing in Premiere Pro CS4. If you see the images below, it will tell you a bit more about the system and settings I'm using. I gave my customer a DVD and she complained about the audio. I asked her to email me the description of what she wasn't happy about, and she wrote this: 'with the audio the sound quality was lost it wasn't crisp and clear. And the base and beats were very low. Came out as very dull sound'. Now I agree with her. One of my fellow editors who uses another system produced a video, and imediately I noticed how wonderful the sound was. I could feel the base and hear more of the instruments.
    My original audio peaked like this:
    I asked someone what was the best level to put it at and they said let it peak at -6. So now my audio peaks like this:
    After the complaint, I asked a few more people, and they said that the green level of the audio should be reaching level 6. So now my audio peaks like this:
    Now I'm not sure if the above settings have fixed the problem, but at least on the computer it sounds better.
    This is the version of Premiere I'm using:
    This is some info about my computer:
    File properties before export:
    File properties after export:
    Project settings:
    These are my export settings:
    I hope this is enough information and I appreciate any help. Let me know if you need me to gather more info.

    haha very funny.
    Certainly not. :-) I've actually noticed it even before she mentioned something to me. Maybe I'm mistaken. You sound as though nothing should be wrong with my audio. Is that right? Judging from my settings.

  • Re-opening a STP Multitrack Project after exporting Mixdown to FCP

    Hello-
    I'm running Soundtrack Pro 2.0.2 with FCP 6.0.5 and am sending my sequences from the timeline to an STP Multitrack Project. I have edited the audio as needed, and exported the final mixed tracks back to FCP choosing .xml import and open in a new FCP Sequence for my options. The new sequence opens fine, complete with the new audio tracks lined up with the originals which are conveniently muted. Up until this point in my workflow, I'm good to go, and my exported audio sounds great - until I realized there were several more audio edits that I needed to make before finalizing the project.
    Now, in the STP Manual, it states that to re-open a multitrack project after it has been exported to FCP is as simple as control-clicking the "mixdown" file (which is presumably the same thing as the imported .xml file...?) in the open sequence and clicking "Open in Editor." (Note: I do have my prefs in FCP set to STP for ext. audio AND video editors so that I can send over linked a/v files) BUT - it also says that when you click on "Open in Editor" that i should be prompted with the option to open only the audio file or open the project. After following these steps, I am not getting prompted to make this choice; the mixdown automatically opens itself in STP as the single .aiff audio file created during export and not as the original multitrack project, as the manual suggests.
    Am I making a careless mistake somewhere in here that I am overlooking? Have I provided enough information to get the help that I need? Any help here would be EXTREMELY appreciated.
    -Meghan

    There is a mismatch somewhere which is causing this sync problem.
    Next thing to try - does your STP project sample rate match the sample rate of the audio in your FCP project?
    In the STP project, on the projects tab, is "none" selected in the pullup/pulldown section, both audio and video?
    In some cases, changing a frame rate can change the speed of the video, causing sync problems, so the earlier discussion about frame rates wasn't just semantics or terminology issues. I understand your frustration, but I was trying to help by ruling frame rate problems out.

  • Why is my audio out of sync after exporting?

    I am using Final Cut Pro X 10.1.
    My footage plays fine and it's all in sync with the external audio when played all the way through on the timeline.
    When I export the project the audio suddenly becomes out of sync around half way through playback.

    These are the details of my audio recording

Maybe you are looking for