I've lost my project. Please help!!!

I was working on my project, then Macbook restarted itself. After that, I re-opened iMovie again and lost my project. I really have no idea what's happening and this project is so important to me. Anyone knows how to bring back my project?
P.S. I used the last update version of iMovie
Thank you

Hi
More info please
• Free space on - Start-Up (Mac OS) Hard Disk ? How much ?
• Any other hard disks connected ? Formatted as ?
Yours Bengt W

Similar Messages

I recently have ipad but before i sell it i made a back up of it and by an iphone when i put all the date on my iphone some files and software did not install is there anything i can do to recover the lost data? please help

i recently have ipad but before i sell it i made a back up of it and by an iphone when i put all the date on my iphone some files and software did not install is there anything i can do to recover the lost data? please help

I don't think you're on iOS 5, I think you're using iOS 6. That's the latest version.
Unless you've used iCloud to back up your documents, you won't be able to restore them. And for future reference, you don't have to uninstall Pages to update your iPad anymore. Sorry about this.

HT1338 i qualified for free mac os upgradation program but i lost the password. please help me out...

i qualified for free mac os upgradation program but i lost the password. please help me out...
my apple id is: [email protected]

What password, you don't need a password... Just go here...
https://uptodate.apple.com/UtdPrepareAction?program=Mountain%20Lion&locale=en_us

I qualified for free mac os upgradation program but i lost the password. please help me out...

i qualified for free mac os upgradation program but i lost the password. please help me out...

http://support.apple.com/kb/HE57

I lost my ipad4 please help me find it

i lost my ipad4 please help me find it

Unless you enabled Find My iPad on it before it was lost then there isn't any way to locate it. If you did enable it then you could try locating it either via http://icloud.com on a computer or Find My iPhone / Find My iPad on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
If you think that it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

When I updated my phone to be able to get iCloud it restored my phone to factory settings and I've lost everything. Please help! Where did it all go and how do I get it back?

When I updated my phone to be able to get iCloud it restored my phone to factory settings and I've lost everything. Please help! Where did it all go and how do I get it back?

I have just done exactly the same thing! How frustrating!!!

Can't open Garageband project, please help

I was using a Mac Mini, 10.7.5, and recorded some vocal tracks on Garageband 11. I clicked gospel choir vocal effect at first, and it was fine. When I wanted to try another effect by clicking another one, the application quit. When I tried to open the project again, the initializing window popped up, and a few seconds after, it said something like "Garageband quit unexpectedly, do you want to reopen to restore the windows". When I clicked "reopen", it directed me back to Garageband recent project page without opening the project I was working on. I tried to open other projects I worked on previously, and those could be opened; just not the one that I worked on recently.
I didn't back up anything with the Time Machine because I never used it before, didn't know how to use it.
I just saved the project to my USB drive, deleted the one on the Mac Mini, deleted Garageband, updated to iOS10.9 something, reinstalled the newest version of Garageband, tried to open the project from the USB drive, failed again.
When I open the "show package content", some mp3 files of my recorded vocals are there. I don't think all of what I recorded are there, but some.
Please help.
Thanks!

Which version of Logic? Which OS? Update your profile so we know what you are running!
P.S. Welcome!

Please help ive lost my phone, Please help ive lost my phone, Please help ive lost my phone, Please help ive lost my phone, Please help ive lost my phone

Please help me i've lost my phone as it was off when i lost it as it was flat, Please help. I was never registered with iTunes.

You did not accidentally "back up" your phone. A backup is the process of making a copy of the data on a device for use in data recovery. What you did was "restore" to your phone a backup that had been previously made of someone else's device.
You need to force the phone into recovery mode (google is your friend) and restore it as a NEW device. Then either restore it from YOUR backup, or set it up as a new phone.

Problem in jUSB project please help me

I am running this jUSB project code for USB detection on a computer. On
"WindowsXP" it runs fine but on "Windows 2000 Professional" it give me an
exception i.e.
java.io.IOException: USB Host support is unavailable.
at usb.core.HostFactory.getHost(HostFactory.java:84)
at RunUSBControllerTest.main(RunUSBControllerTest.java:24)
Kindly please help me in this regard if any one can solve this exception for me.
i was unable to find the solution and also no contact is found on the
source file website of this code.
the links to the site and code is
http://jusb.sourceforge.net/
http://www.steelbrothers.ch/jusb/

This question has asked a lot in different forums. I had same problen, when I compiled RunUSBControllerTest. I got I/O Exception: USB Host support is unavailable. I think I resolve this problem: I think that jusb.dll has compiled in older java version and depends on version. I had Java 1.4.2_05 and it dosen't worked out. I remove it and install java 1.4.1_03. Now the RunUSBControllerTest works fine. I hope this is the answer.

Stuck seriously in the blue print phase of project--- please help

I am Prabhas, sap XI associate consultant in capgemini. I am stuck in the design phase of my project.I am writing this mail to you for helping me in designing the blue print of my scenario. My scenario is like this.
XI will receive a flat file containing stock data and it processes by transforming the structure and then dump the data to R3 system. The output of XI actually invokes some function modules in the target R3 system which in turm executes some BAPIs for committing some transactions.I am clear with the flow and how to realize the process.But the problem is with the function module written to execute some transactions with the help of BAPI.Suppose for some reason one of the transaction commit is failed and the RFC adapter goes in error.Now the question is after correcting the error if we restart the msg in RFC adapter will it start executing the transaction in which it faced the error or the whole RFC will be executed again.
I hope the problem is clear to you.Please help in getting over this. Thank you.
Regards,
Prabhas

Prabhas,
A few quick questions~
1. How are you maing the RFC call? is it a single RFC call that will contain all the records from the file or are you going to make one RFC call for each record in the file?
The user of Recordsets permessage depends on this factor.
If you are going to make a single RFC call, then you cannot use Recordsets per message if there is some dependency in the records.
><i>You mean to ay that even some of the transactions which were committed before the error, we can undo them in RFC. If it is so i am clear with the point.</i>
Well if all records are going to be pushed into a single RFC call, then yes, your RFC code should be such that if there is some error whileprcoessing the call, it should be able to undo the same!
If it is the other option where you are going to make one rfc call per record, the issue will not arise, if there is some error, you can correct the same and restart the mesage from XI .
Regards
Bhavesh

Totally lost - can anyone please help?

Hi,
Can anyone please help with the following...
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.event.ActionListener;
public class project
    public static void main(String[] args)
     //   Time time = new Time();
     //   System.out.println(time.getTime());
    right r = new right();
    left l = new left();
    JPanel p = new JPanel();
    JPanel p2 = new JPanel();
    JPanel p3 = new JPanel();
    JFrame aFrame = new JFrame();
    aFrame.setTitle("Swing 3");
    aFrame.setBounds(0, 0, 700, 500);
    Container contentPane = aFrame.getContentPane();
     // add(new left());
     //       add(new right());
     //p.add(new left());
     //p.add(new right());
     r.textArea.setText("Red");
   p.add(l);
   p.add(r);
   p3.add(p);
   ///p3.add(p2);
   contentPane.add(p3);
   aFrame.setVisible(true);
===================================
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.event.ActionListener;
public class left extends JPanel implements ActionListener
   public JButton redButton,greenButton,blueButton,yellowButton;
   public left()
      JPanel pp = new JPanel();
      setLayout(new BorderLayout());
      redButton = new JButton("Red");
      redButton.addActionListener(this); // step 4
      greenButton = new JButton("Green");
      greenButton.addActionListener(this);
      blueButton = new JButton("Blue");
      blueButton.addActionListener(this);
      yellowButton = new JButton("Yellow");
      yellowButton.addActionListener(this);
      pp.add(redButton);
      pp.add(greenButton);
      pp.add(blueButton);
      pp.add(yellowButton);
      add(pp,BorderLayout.NORTH);
   public void actionPerformed(ActionEvent e)
       // e.getSource() // returns name of the button
        if (e.getSource() == redButton){
           // r.setT("red");
                    System.out.println("red button");
        if (e.getSource() == greenButton)
          //r.textArea.setText("green");
                System.out.println("green button");
        if (e.getSource() == blueButton)
          //r.textArea.setText("blue");
                System.out.println("blue button");
        if (e.getSource() == yellowButton)
           // r.textArea.setText("yellow");
                    System.out.println("yellow button");
===================================
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.event.ActionListener;
public class right extends JPanel
   JButton oneButton,twoButton;
   public JTextArea textArea;
   public right()
       JPanel jp = new JPanel();
       setLayout(new BorderLayout());
       oneButton = new JButton("one");
       twoButton = new JButton("two");
       textArea = new JTextArea();
       jp.add(oneButton);
       jp.add(twoButton);
       add(jp,BorderLayout.SOUTH);
       add(textArea,BorderLayout.NORTH);
}In the left class I want to be able to click a button and then display a message in the JTextArea. I want main to be global - so the r object can be accessed anywhere.
If anyone could get this to work I'd be really grateful.

import java.awt.*;
import java.awt.event.*;
import java.awt.event.ActionListener;
import javax.swing.*;
public class ProjectRx
    public static void main(String[] args)
        // For the buttons in left to set text in the textArea
        // in right the two classes must communicate in some way.
        // Left must have a way to talk to right.
        // Option 1:
        //     Pass a reference to right to left which left can use
        //     to access the textArea in right.
        ProjectRightRx r = new ProjectRightRx();
        r.textArea.setText("Red");
        ProjectLeftRx l = new ProjectLeftRx(r);
        // Option 2:
        //     You could send a reference to the textArea to left
        //     instead of the reference to its enclosing class.
        //r.textArea.setText("Red");
        //ProjectLeftRx l = new ProjectLeftRx(r.textArea);
        JFrame aFrame = new JFrame();
        aFrame.setTitle("Swing 3");
        aFrame.setSize(400, 400);
        aFrame.setLocation(100,100);
        Container contentPane = aFrame.getContentPane();
        contentPane.add(r, "First");
        contentPane.add(l, "Last");
        aFrame.setVisible(true);
import java.awt.*;
import java.awt.event.*;
import java.awt.event.ActionListener;
import javax.swing.*;
public class ProjectLeftRx extends JPanel implements ActionListener
    ProjectRightRx r;
    public JButton redButton,greenButton,blueButton,yellowButton;
    public ProjectLeftRx(ProjectRightRx r)
        this.r = r;
        JPanel pp = new JPanel();
        pp.setBorder(BorderFactory.createTitledBorder("Left"));
        setLayout(new BorderLayout());
        redButton = new JButton("Red");
        redButton.addActionListener(this); // step 4
        greenButton = new JButton("Green");
        greenButton.addActionListener(this);
        blueButton = new JButton("Blue");
        blueButton.addActionListener(this);
        yellowButton = new JButton("Yellow");
        yellowButton.addActionListener(this);
        pp.add(redButton);
        pp.add(greenButton);
        pp.add(blueButton);
        pp.add(yellowButton);
        add(pp,BorderLayout.NORTH);
    public void actionPerformed(ActionEvent e)
        // e.getSource()   returns object that generated this event
        // To get the name of the button you can try:
        JButton button = (JButton)e.getSource();
        String name = button.getActionCommand(); // or,
                      // button.getText();
        String ac = e.getActionCommand();
        System.out.println("name = " + name + " ac = " + ac);
        if (e.getSource() == redButton){
//            r.setT("red");
            System.out.println("red button");
        if (e.getSource() == greenButton)
            r.textArea.setText("green");
            System.out.println("green button");
        if (e.getSource() == blueButton)
            r.textArea.setText("blue");
            System.out.println("blue button");
        if (e.getSource() == yellowButton)
            r.textArea.setText("yellow");
            System.out.println("yellow button");
import java.awt.*;
import java.awt.event.*;
import java.awt.event.ActionListener;
import javax.swing.*;
public class ProjectRightRx extends JPanel
   JButton oneButton,twoButton;
   public JTextArea textArea;
   public ProjectRightRx()
       JPanel jp = new JPanel();
       setLayout(new BorderLayout());
       oneButton = new JButton("one");
       twoButton = new JButton("two");
       textArea = new JTextArea(10,25);
       jp.add(oneButton);
       jp.add(twoButton);
       add(new JLabel("Right", JLabel.CENTER), BorderLayout.NORTH);
       add(jp,BorderLayout.SOUTH);
       add(textArea,BorderLayout.CENTER);
}

I Can't SAVE my project, please help!

For some reason when I go to save my project or during the auto save, I get an error message which reads: "Operation Not Allowed"
Any idea why I am getting this message?
I've made number of changes and I don't want to lose my work, please HELP!

Create a new project with same settings, copy and paste the troubled project's content onto the new sequence and try to save giving to it a unique name.

I lost my iphone, please help me locate it.

i lost my iphone 3gs, please help me locate it.

Click here for information; your wireless carrier may have another way of locating it.
(126560)

Ipod not found - will not sync; restored and lost everything. Please help.

To whom it may concern,
My iPod Classic has worked perfectly for the few years I've had it. I only use it a few times a month on average so it's still in really nice shape.
Earlier today, I went to sync it like I do every couple of weeks whenever I add new songs, and something strange occurred. At first, it seems to say "Syncronizing..." but quickly stops and displays the "Connected" status instead - not long enough to sync even one song.
Sure enough, I checked it and it had not updated.
After using the "Run Diagnostics" option, it tells me "Device Sync Tests Results: No iPod touch, iPhone or iPad found."
Yet - under "Device Connectivity Tests", it does say "iPod Found" and it shows up as a device in my iTunes - but not in my Devices (under Preferences).
I followed every step in the troubleshooting guide that iTunes directed me to, each with the same results. As a last resort, I used a Factory Restore, which was what the website told me to do.
To my horror, the problem STILL persists - and I just cleared out not only all of my songs, but photos that were very important to me that I only had on my ipod. I even tried to do a backup first, but my device would not show up under the "Preferences/Devices" category, I could not even save them before I restored it.
Now I am stuck with an ipod that will not sync with my itunes library, and an ipod that has absolutely nothing on it. At least before I restored it, it had all of my old music and photos on it.
This is very frustrating and upsetting. If there is anything that might be able to be done, please help - and please, do not send me back to the same webpage - I already tried everything there at least twice now.
I also borrowed a different cable to make sure it wasn't my adapter, and there was no difference.
To make matters worse, as I am trying to find someone to assist me, I received this message after entering my serial number;
"It looks like your product is not covered for complimentary technical support, so you may need to purchase a single incident of support."
This iPod already cost me $250.00 and that was steep in and of itself. I really do not feel that it would be fair to have to pay even more just to get some help when it malfunctions.
If absolutely anything can be done, please help me. I would be very grateful.
Thank you in advance for any assistance.
    P.S.- This is a copy of the error message I received;
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
ASUSTeK COMPUTER INC. X202EV
iTunes 11.1.3.8
QuickTime 7.7.4
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 007DB9C80C439708
Current user is not an administrator.
The current local date and time is 2013-11-28 22:05:46.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: e38663b94f826b3f535ae2a59ada9fea
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {F0006950-D07F-4649-AD41-A38C48C0B9DA}
Description:    Microsoft Wi-Fi Direct Virtual Adapter
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Wed Dec 31 16:00:00 1969
Lease Expires:    Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name:    {4CD83EC0-97FE-4E11-9DC2-0A1A28338772}
Description:    Qualcomm Atheros AR8162/8166/8168 PCI-E Fast Ethernet Controller (NDIS 6.30)
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Wed Dec 31 16:00:00 1969
Lease Expires:    Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name:    {C6056BBC-55CD-40AC-85EA-86167FEDB5D0}
Description:    Qualcomm Atheros AR9485 Wireless Network Adapter
IP Address:    192.168.1.112
Subnet Mask:    255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:    Yes
DHCP Server:    192.168.1.1
Lease Obtained:    Thu Nov 28 21:26:04 2013
Lease Expires:    Fri Nov 29 21:26:04 2013
DNS Servers:    192.168.7.254
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-11-28 22:05:29.
**** Device Connectivity Tests ****
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
No Universal Serial Bus Controller found.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
FLUKE (E:\), iPod classic running firmware version 2.0.1
Serial Number:    8N837N2A2C7
Bus Speed:    61440
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

This issue has been resolved - my Support Advisor, Edgar, was able to discern what was causing the problem.
It appears that, despite years of never experiencing this, one of the latest ipod updates actually altered my device's personal settings and changed it to "Manual" for all synchronizing; even performcing Factory Restores did not change it back to being automatic.
My ipod is working as good as ever now thanks to Edgar. If anyone else is having this problem, please make sure you check your device's settings in iTunes and see if "Manual" is checked - even if you never changed the settings yourself and have no reason to suspect that to be the problem, as was the case here. If it is checked - uncheck it to enable automatic syncing.
So relieved this was not a much more serious problem. I've missed having my music on the go. Thanks, Edgar!

I have problem in my project please help me :(

I create package called" v cam" that call inside movie clip that make " zoom in" and "move with the player in the stage" it work nice. but when the player collision with another enemy in the movie clip its call movie clip question that is in another scene and stop the "v cam but instead the "v cam" still working and "zoom in" the question movie clip.
how can I make it stop if the collision happen and go to another scene that has the movie clip.......please help me

you need to understand vcam to do that. if you don't understand how it works, write to the author or post on a vcam forum.

F Buttons (eg. F1, F2) have lost usual functions please help!

Bought my MacBook a few days ago and today I think I've done something inadvertently which has knocked all the shortcuts out of whack. For example, F1 has a sign on it to decrease the brightness on screen, F2 has one to increase, F3 I think is something to do with Expose and F4 has a dashboard thing on it, then F7 to F9 are various controls to fastforward/rewind things and F9,10 & 11 are sound related...however, none of these work now, they do different things and I don't know how to get them to go back to doing what I want. When I hold down the fn button they work but it's a pain because I can't turn my sound on and off otherwise, PLEASE help, I'm getting really frustrated!

Open System Preferences.
Select "Keyboard & Mouse".
Select "Keyboard".
Uncheck the box labeled "Use all F1, F2, etc. keys as standard function keys".
That should do it.

I've lost my project. Please help!!!

Similar Messages

Maybe you are looking for