I've never had my ipod die while connected to the charger

I've been having problems with my iPod since I've updated it to iOS 8. My battery isn't charging and it's actually died on me three times WHILE connected to the charger. My apps also keep crashing. It's beyond frustrating.
Is there any way I can fix my problem about it not charging?
(i don't have a computer to plug it into so that's a solution that will not work)

Not Charge
- See:    
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod      
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
  Apple Retail Store - Genius Bar
For app crashing first restore from iClould backup and next restore to factory settings/new iPod via wifi
iOS: Back up and restore your iOS device with iCloud or iTunes

Similar Messages

  • My macbook works well while connected to the charger, but using the battery it gets really slow

    My macbook pro 2011 yosemite 10.10.1, (2,3 GHz Intel Core i5 / 4 GB 1333 MHz DDR3 / Intel HD Graphics 3000 384 MB) recently started to present a problem that when using only the battery, it gets really slow, but connected to the charger, it operates normally. I have already taken to a technical assistance but was not presented any problem in the battery. And when I open activity monitor it shows that the kernel_task process uses almost 100% CPU and so is almost 0% idle, so it is almost impossible to use the computer (using the battery). Is there anything I can do to prevent this process using 100% CPU?

    My recommendation for a SMC reset was initiated by your posts indication poor performance when under battery power.  Often a SMC reset will correct bad battery behavior but apparently not in your case.
    Look at this article and see if there are any possible hints for correction of the problem:
    http://www.cnet.com/news/kerneltask-process-taking-up-an-inordinate-amount-of-cp u/
    If not, the the best option will be an Apple store genius bar appointment.
    Ciao.

  • IPhone 4s blank screen but its on and keeps vibrating every 6 secs while connected to the charge. Please help

    I was pranking my friend that doesn't like other people taking pictures of him.
    He thought I was really taking a photo so he slapped the iphone out of my
    hand and it fell on  and turned off. I ran home I tried turning it on but nothing worked
    so I opened the cause I thought it was the screen because I just put on a new screen
    3 weeks ago. So I opened all the screws and took everything out then put everything back
    in and closed the screws. I put the phone on charge and it was nothing but blank except
    it kept vibrating. I restored it to factory settings. but that didnt work. I tried holding down
    the Lock/Home button but nothing worked. I am phone-less. please I need a solution fast
    - iPhone 4s

    Well, since you decided to take the phone apart, and you have already tried the normal troubleshooting measures we would suggest (like resetting the device), you are pretty much up a creek. There is no telling what may or may not be wrong with the device, since it has been taken apart.
    Sorry, there is nothing we can do here to help you....
    GB

  • Attempting to use bluetooth, but my newly replaced 2nd generation iPod touch searches but never detect my wireless headphones which are right beside it. My old iPod had no problem detecting and connecting to the same headphones.

    Attempting to use bluetooth. My newly replaced 2nd generation iPod touch searches but never detect my wireless headphones which are right beside it. My old iPod had no problem detecting and connecting to the same headphones.

    You can try:
    - reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off an then backon your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • 2nd generation ipod won't connect to the internet, and i've never had a problem with it before.

    My ipod won't connect to the wi-fi but our computer will.

    - Reset the iPod. Nothing wil be lost
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset neteworks settings: Settings>General>Rest>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device "Kitchen". The host cannot be reached."  Has anyone else had this?

    Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device “Kitchen”. The host cannot be reached."  Has anyone else had this problem

    I'm having the same issue.  Haven't found a workaround.  I use a main TimeCapsule as my main router, also have another TimeCapsule that extends the network, three Airport Express and an AppleTV.  For whatever reason, the two AirportExpress that I have in a different rooms cut out.  I only have 600 square foot apartment so it's not that big, the signal should be strong enough.  Airport Utilitiy reports the signal strength to be strong on all devices.
    I'm using all new equipment, a new MacPro for my music, new TimeCapsules, new Airport Express, new everything with the latest Yosemite software.  Very frustrating.  My Airplay used to work very nice and now I'm constantly having issues and restarting my network.  I did a fresh install of all my software on my MacPro when I got it in January so it's not as if it's an old machine with old software, everything is new within the last 6 months.
    The only workaround I found so far is to unplug the devices and to plug them back in.  Since upgrading to Yosemite, I'm restarting my Airport Express at least twice a week.  Very annoying.

  • Had a ipod touch 4, just purchase the ipod touch 5 why didn't my notes transfer over?

    had an ipod touch 4, just purchased the ipod touch 5, everything transferred to my new touch 5 except my notes. Any ideas why my notes didn't transfer?

    Did you follow these instructions?
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • IPod locked up while connected to the computer, "saying do not disconnect"

    iPod locked up while connected to the computer saying "Do Not Disconnect"

    Is it red? If so, then it's supposed to happen. As far as I know, there's no way around it.

  • Brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help

    brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help
    i did that middle button and top button for 6-10 seconds, hold play button, that hold button and got it right back and still it won't on but it is detected on my pc and itunes. i've already even put on some songs but it keeps on charging and charging for how many hours and if i remove it, it shuts off and won't turn on again.

    brand new/never been used iPod nano
    Call Apple Care.   You are still under warranty.  You also have 14 days from the date of purchase to return your iPod with no questions asked. 
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. 

  • Had my ipod locked and put it on charger, now it will not even turn on and does not even register connected to the puter?  Any ideas???

    Had my ipod locked and put it on charger, now it will not even turn on and does not even register connected to the puter?  Any ideas???

    You just need to reset the ipod by holding down the sleep button and home button  for ipod touch or the menu and centre button on others for about 10 seconds

  • I had itunes played from my PC to my music system that is connected through a nework.  It use to work fine, but now I get an error message that say "An error occured while connecting to the Airplay Device "Stereo".  An unknown error occured (-15000)".

    When trying to play itunes from my PC to my stereo connected to an Airport Express, I gen an error that says "An error occured while connecting to the Airplay device "Stereo" an unknown error occured (-15000)".  This has happened before and for reasons unknown to me, the problem corrects itself, then it starts again/  Makes me wish I did not have my music on itunes.

    moehadi, Welcome to the discussion area!
    This is typically caused by a firewall or Internet security software running on your PC. Please read the comments in "Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes".
    Also there is "iTunes 8: Unknown error -15000 when attempting to stream music to devices connected to AirPort Express with AirTunes".

  • An unknown error (-15006) occurred while connecting to the AirPlay device "Living Room Apple TV".

    Hi All, need some advice here, this occurs in iTunes these days never had this prob before Using iTunes Airplay or AppleTv.. It's irritating Me!An unknown
    ,, error (-15006) occurred while connecting to the AirPlay device “Living Room Apple TV”.''''
    Thanks for possible solutions
    BossJoop Imac + 2012, 3e gen Apple tv + all latest software and updates

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Restart your computer.

  • An error occurred while connecting to the AirPlay device "Stereo Airport Express G". The network connection failed.

    When attempting to play iTunes 11.1.2 music wirelessly from my Mac Mini to stereo speakers connected to an AE "G" I get the following message: An error occurred while connecting to the AirPlay device “Stereo Airport Express G”.   However, when I attempt to play internet radio from an iPod Touch wirelessly to the same speakers connected to the same AE "G", it works fine.
    Finally, when I swap out the "G" for an AE "N" connected to the same speakers Airplay works fine, both from the Mini and the iPod.
    Why would the iPod connection work while the Mini connection not?

    I have what sounds like a very similar issue.
    I had my Denon 3312ci working perfectly with Airplay from my 2013 iMac running iTunes. Upgraded to iTunes 11.1.3, and now when I attempt to Airplay direct from iTunes to the 3312, it plays for about half a second and then stops. Displayed on the Amp then says "Assigning Network". The amp starts dropping ping packets at this point. About 15-20 seconds later the pings start coming back, but no Airplay.
    I tried different network cables, resetting the microprocessor, a different switch, changing between DHCP and static IP. Was about to make a warranty call to Denon, when I thought maybe I should try Airplaying directly from iphone and ipad. Much to my surprise, it worked from those devices.
    I prefer to use my iMac to Airplay rather than ipad/iphone as I found I got next to no audio drop outs using it that way (they are both using wired network), where as ipad/iphone occasionally would get a moment of silence in the middle of a song.
    My network set up is fine. I can use internet radio and connect to DLNA services fine on the amp. It is just airplay between iTunes 11.1.3 and the amp where the issue lies.
    No fixes as yet, but I have logged a support call with Denon Australia to see what they say.

  • I have an I phone 4s, have had it little over a month and the charger is no longer working. Now I have to return it at my inconvenience and wait for a replacement. I am very disappointed considering it is Apple. Has anybody else had this problem?

    I have an i phone 4s, I have had it just over a month. The charger is not working and it has to be returned. Very disappointed considering it is Apple I expected  better and have never had this problem with any other phone. Now I have the inconvenience of having to return it and waiting for a replacement and in the meantime I'm without a phone. Has this happened to anyone else?

    Wow, life is certainly tough for you.
    S***t happens.  That's why there's a warranty.

  • I keep getting this message An unknown error (-15006) occurred while connecting to the AirPlay device " AirPort Express".

    Please help. I have been having major difficulties with my Airport Express. It used to work fine but for the last year or so it continually disconnects, skips and ultimately drops out and itunes gives me this message "An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort Express”. I keep resetting, unplugging, restarting Itunes, or my computer. It works for a couple of hours and then I get the message again. It's making me nuts and was a bummer at last week's party when we had no music, yet again. I have looked up the support discussions, but there is no answer as to how I can fix it. I am currently using Mt Lion OS. Does this have anything to do with it? Checked for software updates, but nada.
    Any suggestions.

    It may be possible the where you have the AX located may just be in a spot where it does not get a good signal even it is only 8 feet away.
    I suggest that you download and install iStumbler. You will use it to determine the signal quality by making Signal-to-Noise Ratio (SNR) measurements. This will be easiest if your Mac is a laptop ... or you can borrow one. When taking the measurements, you only want your "main" AirPort running as this is what we want to measure at the location of the AX.
    SNR (in dB) = Signal (in dBm) - Noise (in dBm)
    You can easily find the Signal and Noise value using System Profiler on your Mac laptop.
    ref: Click on the Apple icon on the menu bar > About This Mac > More Info... > Contents > Network > AirPort > Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise
    While your still in the System Profiler, note the value for Transmit Rate.
    These values should be negative numbers. For example, mine currently read: -67 dBm / -95 dBm, with a transmit rate of 27 (Mbps). Plugging in these numbers yield: SNR = -67 - (-95) = 28. My Mac Mini is about four rooms away from my AEBS with about five walls between them. As you can see, the signal is still quite useable ... but the bandwidth is minimal, especially for streaming.
    SNR Guideline
    40dB+ SNR = Excellent signal
    25dB to 40dB SNR = Very good signal
    15dB to 25dB SNR = Low signal
    10dB to 15dB SNR = Very low signal
    5dB to 10dB SNR = No signal
    Please post back your results.

Maybe you are looking for

  • Smart Mailbox not working correctly based on received date

    I setup a smart mailbox with the condition: Date Received is not in the last 1 year I get plenty of messages where the date received was within the last year. Anyone know how to fix this problem. Thanks in advance, Roy

  • Leopard dock and external display

    recently, i've switched the dock position from bottom to left and i now find that the dock gets positioned to the left edge of the external display when the DVI-VGA adaptor is plugged in and the external display is not mirroring the built-in display.

  • Exception in Sending Mails - Must issue a STARTTLS

    Sending Mails to Multiple Users I m getting this error, can somebody tell me what could be the possible error here: 530 5.7.0 Must issue a STARTTLS command first k39sm4421196wah com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.0 Must issue a STARTT

  • Hardware Configurations for Oracle 10g AS

    Hi, I'm looking for Hardware Configurations on various platforms which Oracle AS 10g supports. Basically i'm looking for details for these on each supported platforms. No. Of CPUs CPU Speed RAM Disk Space I would appreciate if someone point me some d

  • /sbin/ldconfig lib* empty, not checked

    Hi I am installing arch on a net book and whenever I try to install something I get the error in the subject. Every package says this for lots and lots of librarys. I can't find any info on the issue apart from an old thread which I didn't understand