I'VE RAN ACROSS A VERY ODD PROBLEM iPod syncing trouble

I bought my Macbook Pro in August 09. its very new and i have a problem with my iPod syncing and i need help noticing wats wrong.
My iPod will not sync properly, i plug it in, it shows up on my desktop and in my iTunes as a black iPod(as it normally would) i add my library to the iPod Music Folder, it adds a few hundred, sometimes thousands of songs, then seems to buffer...or freeze!! And it seems to freeze on one song(always a random song, always different sizes or by a different artist.) i get the beachball(multi colored ball represents loading) as my mouse icon and i cant click anything in my itunes window for a few moments. Then wen im able to click none of the buttons respond. the only way to *stop the ipod from syncing. *unfreeze iTunes. *or eject my ipod. is to unplug it fro mym laptop. then the scren that says "You have manually unplugged a USB device and some data added recently may be lost blah blah blah." then i go to turn my ipod on and non of the songs that added prior to the sync freezing on that one song were added. Can anyone help me out with this and give me a few reason as to why this might be happening?
*NOTE: Ive tried a few of my friends iPods aswell, and i encounter the same problem everytime. the odd thing is, everytime i turn my laptop on for the day, and i do this, this problem accours after adding a thousand songs or so, and after manually unplugging the iPod after the sync freezes on a song and plugging it back in to try again, it stops after 100 songs, and sometimes after 20 or 30 songs, and its always a low amount after the first time i try and sync after powering on my laptop.
*ALSO NOTE: after the sync freezes, about 30 seconds after the beachball usually goes away, and i can press anything in itunes, EXCEPT a song name in whichever library i was in before the sync freeze. and after pthe beachball goes away, its as if the songs ARE still syncing, and itunes is working, just at and EXTREMELY, EXTREMELY slow pace. *AND this problem accoured BEFORE i installed Snow Leapord 10.6 and 10.6.1*
i hope someone can help me out this problem has really ben bothering me and id like to have it fixed sooner then later.
thanks.

I am having this problem too. I have a classic iPod, several years old, just restored it to factory settings, which required the update to the newest software (not what I wanted to do, but I had no choice. I wanted to change the name of the iPod and mistakenly thought this way the way I had to do it. Wish I checked. Now when I sync that iPod, it goes for about 5GB of data - although sometimes less - and freezes. It says it is still updating but it isn't. Then iTunes becomes unresponsive and I have to force quit it. I cannot eject the iPod even through Finder, as I get a warning that says the information is in use by another program (although none are open). Then if I try to restart the computer, it totally freezes and I have to do a hard manual reboot. Have used disk utility to repair permissions, got an interesting message that says "Warning: SUID file "System/Library/Cores...has been modified and will not be repaired."
I have updated other iPods (newer) also this evening and they do not freeze. Any help would be appreciated.

Similar Messages

Very Odd Problem connecting to network please help

Ok so I have had my Macbook Pro for a while and I have both an Airport Extreme and an Airport Express in my room. So until recently I could turn on my computer and my Airport would automatically connect to the internet. Now recently I turn on or open my computer and I can still see my network but I cannot connect to it. I have restarted all the devices and my computer, but the only thing that eventually logs me on (after anywhere between 5 minutes - an hour) is waiting. But the second I close my laptop I will get booted off the Internet and I cannot connect again.
However I can still see the network I just cannot connect to it.
Also another problem I have noticed is that when in Network Setup Assistant it asks me for the password for the network, and I have entered this password many times in my life for my iPhone and for my other devices. And yet recently when I input the correct password (ive tried over 100 times) I get a message saying that the password is incorrect, when I know for a fact that I am putting the right password in.
If anyone could please help me I would be very grateful.

The Airport Extreme base station has 2 passwords, one for logging into the router, the other for your network access (assuming you have security switched on). Just make sure you are trying to enter the correct password (I know this sounds obvious and no offense is meant).
If you added the Extreme to your other router, make sure in Airport utility the Extreme is set to Bridge Mode, this will remove any incompatibility issues with 2 devices trying to obtain IP addresses from your ISP. Only one router should connect to your ISP, using password, username and relevant settings, the other is a bridge for your internal network allowing faster transfers between devices connected to say for example your extreme.
I have a Netgear DG834PN modem/router which is assigned control to connect to my ISP (as it is a modem, the Extreme Base Station isn't a modem). The Apple Extreme is connected through ethernet to the Netgear. I have all my 802.11g/b/a devices connected through the Netgear wireless network (2.4Ghz) and all my 802.11n devices connected through the Apple Extreme Base Station wireless network ('n' only @5Ghz). I also have my Mac Pro and my AppleTV connected through gigabit ethernet (through the Extreme ethernet). Everything works well. AppleTV and Mac Pro sync very quickly, my MacBook Pro connects to other computers or devices (AppleTV for streaming content) within the Apple Extreme network, wired or wireless, and allows fast transfer speeds, especially with no g/b/a devices slowing things up.
I also have a USB hub connected to the Extreme with USB printer attached and additional external storage connected, both available throughout the Extreme network to either wired or wireless devices.
It sounds a bit complicated but it is really easy to do.

Very odd problem with Canon Pixma i4300 (color printing issue)

My printer prints black text fine, including colorful illustrations. Also eg. test photo like http://printermaster.dk/TEST/Color_Print_Test.pdf are completely fine. BUT - when I print real photography on Glossy photo paper, in approximately 1/3 of the picture I got aprox. 1 cm pinker/whiter stripe. I did all sort of cleaning, including removing and flushing print head and nothing helps. When I'm printing the same on the normal paper, I got stripes randomly in the picture - eg. 3 stripes / 3 cm long / 5mm wide. When I print without borders, the symptom again changes - the upper 3cm seems to be fine, then I can observe some horizontal lines, then again a pinker/whiter stripe and then the bottom seems to be again fine. I did all sort of recalibration, printer head alignment, different sort of paper - the result is still the same. Any idea please ? Is it time to throw it away ? Also here are some results of the alignment, it looks very strange (vertical lines?!). Head alligments / service info prints / etc. : http://s000.tinyupload.com/index.php?file_id=06883978457109160756

Hi sharksys! Welcome to The Canon Forums, and thank you for your post!
We appreciate your participation, however we need to let you know that the Canon Community Forums are hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.
If you live outside the United States, please click here and select your country or region for your support needs. You're free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.

Very odd problem with CS2 on Power Mac G4

My office has 18 identical Power Mac G4s (1Ghz dual processor, 768MB RAM) all running OS X 10.4.9 and Adobe CS2. All except one that is, which for some reason InDesign and Photoshop always quit on startup with unexpected errors, or an unusual error saying that the application is still shutting down so cannot be opened.
I'll skip some of the troubleshooting details, but basically we've tried clean installing the OS on a separate drive and putting CS2 onto the clean install with no optional extras and it makes no difference. We tried swapping hard discs with a machine that was working fine, and the same machine continued to have the same problems while the other machine was fine. We then swapped out RAM, graphic cards, and removed all unnecessary devices and no difference, meaning logically the problem must be with one of the processors or the logic board. We sent the machine off to Apple TWICE and both times it came back with no problems found. Adobe won't help as it must be a hardware problem, and Apple won't help cause they can't find any problems. We offered them money to just exchange the logic board and processors, but they said no.
As a last resort, we tried installing CS1, foolishly assuming that as it was different software it might actually work. It actually worked even less well as Illustrator won't run either.
Does anybody have the faintest idea what the problem might be, and how we could go about fixing it?
Many thanks.

Thanks for the suggestion. We'd actually joked that the desk might be cursed, but honestly figured that if there was a low voltage problem then it would show up in other ways. The machine's been in use for over 4 years and this is the first time it's ever shown any issues. Even now it's just those 3 applications, and always at start up.
I'll try moving it to a different desk anyway and see if that helps, failing which we may have to bite the bullet and buy a new one, but we've already splashed out on 18 machines worth of OS X licences, CS2, Office, Font Folio etc. so they're not going to give us the money lightly...

10.9.5 very odd problem: will not install

When I tried to update a few days ago the server was extremely slow, possibly related to the iOS8 traffic? Speedtest from my end was 20 mbps, but the OSX update (~130 mb IIRC) was scheduled to take 9 hours. I paused it and started over a few times over the next 24 hours and eventually the entire file was downloaded and was ready to update with a restart. I couldn't believe how slow of download it was though. I can't imagine it was this way for everyone.
Anyway, when I restarted my computer the update showed as installed in the App store update screen (see picture below), but "About this Mac" showed that I was still running 10.9. 4.
Now I am going in circles. The computer frequently reminds me that I need to update by restarting, I press update and restart my computer, but I'm still running 10.9.4.
Can I start from square 1 again? My computer (2011 Air) is confused.
TIA.

Unless you have multiple volumes mounted running Mavericks, you shouldn't be seeing multiple installation messages. Best thing to do is manually DL and install the COMBO update and quit wasting your time with the crapola that's the App Store delivery system.
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.5), ML & SL, G4 450 MP w/Leopard, 9.2.2

My iPod touch (2nd generation) has started to act very odd following a sync I performed 2 days ago!

It switches on & off at random, will not let me adjust the volume and has also started to take screenshot pictures whenever I press the home button. To top it all off, it also switches off whenever I press the volume up button.
I have done a factory reset but the problems still persist.
These problems never occured prior to the sync and Apple want £80 to replace the item.
Help!

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Very Odd WiFi connection problems - plus crashes

Since Firefox 2.0.0.9 crashed yesterday, I have had very odd problems with my WiFi (Earthlink through an Apple Airport). Network Diagnostics says everything is okay, but Safari can no longer connect to the internet, and after Firefox crashes I can not even send Apple an error report. Yet I can get online with Firefox, as I am now.
The problem apparently started EITHER when I upgraded to the latest Firefox or when I tried to place an order at <http://www.senacases.com/> (or both). After Firefox crashed multiple times while trying to place an order at <http://www.senacases.com/>, I opened Safari, which would not connect.
I ran Network Diagnostics which said everything is fine. But Firefox continually crashes trying to place an order at <http://www.senacases.com/>, Safari continues not connecting, Network Diagnostics continues to say everything is fine, and now I can't file an Apple Error Report and trying to connect to some of the library services at Notre Dame (something I have always been able to do before), makes Firefox crash.
The only other possible symptom I have noticed is that I could not connect to a Late Show video this morning. Otherwise, I can browse the web in Firefox, I can pick up my email with Entourage, etc.
How do I fix this?

PS: I once had a similar problem that was fixed by a simple restart.
I have restarted numerous times now, with no change. My MacBook was off over night.

A very odd OS problem

I've encountered a very odd problem with a computer at work. It's a G4 733 mhz, running os 9.1.0, and at my insistence, my boss has agreed to let me install os X, but only on an external drive. Right now this thing has all kinds of weird going on. First off, it never remembers the startup disk, it always starts up with a question mark for a minute before finding the internal os 9.1 disk. (This is an old problem, not a result of my attempt to install os x.) It starts up off the tiger disk fine, but it won't recognize the firewire disk as the start up disk. (In OS 9's startup disk control panel it will see the the folder, and it lets you select it, but it always reverts to the internal drive with OS 9 on restart. Same thing when selecting it with the startup disk options from the OS X Install Disk.) To make things weirder, holding down option on startup lets me see the CD System folder, and the OS 9 System folder, but not the firewire drive. I hooked the same drive up to my laptop, and booted up off the drive fine. I tried giving the PRAM a zap just for fun , and then it didn't see anything till I started up off the CD and told it to startup in OS 9. My mind is boggled, anyone have any idea what this is a symptem of?

Hi, Geoff -
OS 9.1 can be used as Classic with OSX, although OS 9.2.x provides better compatibility in that mode.
However, the original OS 9.1 installs (whether from a CD or the result of a download update) have an issue - the version of Startup Disk control panel that comes with OS 9.1 and earlier can not recognize OSX as a viable Boot OS, hence will not make it available for selection. The solution for that is to update the OS to 9.2.x, or at least update just that control panel. There is a specific download available for just the control panel -
Startup Disk 9.2.1 Document and Software
There may be another problem. You stated -
I hooked the same drive up to my laptop, and booted up off the drive fine.
That would indicate that the install of the OS on the firewire drive may have been done when it was connected to the laptop. If that was the case, it may not be suitable to boot a different model, such as your G4/733.
Most OS installs are specific to the hardware of the machine whose boot OS is running the installer. There is a way to do a universal (boot any Mac) install of OS 9.x, but I don't know if there is a way to do that with OSX.
To make things weirder, holding down option on startup lets me see the CD System folder, and the OS 9 System folder, but not the firewire drive.
Booting up using Startup Manager (which is what appears when you hold down the Option key during boot) will display only those OS's valid for that particular machine, and only one OS per volume (volume = an unpartitioned drive or disk, or the partition of a partitioned drive or disk).
Sometimes Startup Manager does not 'see' all bootable volumes immediately; clicking the Rescan button (the round arrow) will make it recheck all buses for a bootable volume.
First off, it never remembers the startup disk, it always starts up with a question mark for a minute before finding the internal os 9.1 disk.
This could be indicative of a weak or dead internal battery. Since your G4/733 is running a version of OS 9.1 it must be a Digital Audio model (the G4/733 QuickSilver models originally came with OS 9.2, and can not use any version of OS 9.1); this means it is about 5 years old now, which is about all that can be expected from an internal battery even if the Mac is left connected to live power when it is shut down.
When the battery is too weak or dead the Mac will not remember PRAM settings between boots or restarts, and may have difficulty booting to some drives (particularly to external ones).
Suggest you replace that battery - you can get one at places like Radio Shack for about US$15, cheaper on-line.

An odd problem when error handling

hi experts
I encountered a very odd problem when trying to show up an error message... and hope someone can help me out.
I defined a standard action in the view, and wrote some lines of code to check the input data in the predefined methodWDDOBEFOREACTIONwhich will call a method from component controller, and that method will call message_mananger->report_t100_message to show up an E type message if any error happened. But the problem is the program does not stop there but go into the action handler(ONACTIONACT_XXX).
I think it should actually stop and show up the message rather than get into the action handler because of the action is standar...
can anyone help?
many tkx

hi,
i went through your code.....the code is fine but as you told that it goes to the exception handler after coming to the message part ...this is because you are using
CALL METHOD LO_MESSAGE_MANAGER->REPORT_T100_MESSAGE
EXPORTING
    MSGID                     =
    MSGNO                     =
    MSGTY                     =
   P1                        =
   P2                        =
   P3                        =
   P4                        =
   MSG_USER_DATA             =
   IS_PERMANENT              = ABAP_FALSE
   SCOPE_PERMANENT_MSG       = CO_MSG_SCOPE_CONTROLLER
   VIEW                      =
   SHOW_AS_POPUP             =
   CONTROLLER_PERMANENT_MSG =
   MSG_INDEX                 =
   CANCEL_NAVIGATION         =
   ENABLE_MESSAGE_NAVIGATION =
RECEIVING
    MESSAGE_ID                =
this function will simply report that message but will not hold the control to the same screen..
so use
CALL METHOD LO_MESSAGE_MANAGER->REPORT_FATAL_ERROR_MESSAGE......
and tell me whether it solved the problem or not....
@ sarbjeet i think that Raise_T100_error is an obselete function...rite?
thanks and regards,
sahai.s

When I open fire fox my yahoo page come up very odd, as does mail if I sign in. Can't figure out how to correct this. Home page and mail open fine in others.

When I open Firefox my yahoo home page comes up very odd and not usable. If I log into my e-mail it also comes up odd and not usable. (the tools across the top like delete etc don't show up.) If I go to a different browser and pull up yahoo it is fine, if I log on to my mail there it also comes up fine and usable. Please help am new to Firefox and just barley getting to where I can us it really don't want to have to change to yet another browser. Losing all my stuff again. (Microsoft browser program stopped working) Please help, real desperate here. Thank you. Followed the instruction on how to take a screen shot, did so, but don't know how to attach it here. Didn't see instructions regarding that and beyond my limited abilities. Have it if someone needs it and can tell me how to attach or send.

If you use extensions (Tools > Add-ons > Extensions) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
You can use one of these to start Firefox in Safe mode:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
If it works in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Odd problem single contacts name not being display...

Hello Folks i have a strange problem possibly phone network or both
i have a N73 tied to o2 in the UK, i have friend who when they call me only shows up on screen as the number, this doesnt happen to any other contact on my phone, it just doesnt seem to recognise the name tied to the number
i deleted the contact and created it brand new, put the name and number in the correct place but still this is the only person on my phone whos number shows when they call rather than the name
very odd indeed!

This means you have the phone number in your contacts twice.
When this happens, since the handset can only display one contact name and it doesn't know which to display, it reverts to default.
In the past this was a real pain, however if you install the new Nokia Search you can now search your "desktop", ie: you can put in the phone number (or better, a part of it coz there may be formatting differences) and find the duplicate contacts.
You can download the new search tool from:
http://mobilesearch.nokia.com/A4160041

An odd problem importing footage...ideas please!!

I'm having an odd problem with iMovie that has me stumped so far. I'm currently using a borrowed DVcamcorder to import my footage. So far I can only import footage that was taped using that exact camcorder. I have other footage, (also miniDV format) that was created on a different camera, and it won't import properly. It comes out very jumpy, almost as if the frame rate is off or it's not scanning the fields properly, playing only every other one. The camera also gives me a "clean heads" message that only appears when I try to use the "foreign" video. The heads don't need cleaning, and I've checked the frame rate. Does anyone have any ideas? I'm lost so far!!
I'm using an iMac G5, with iMovie HD.
Thank-you!

Welcome to iMovie Discussions!
It may be that the "foreign" tape (..i.e; not recorded in that camcorder you're using..) was recorded at LP (Long Play) - a slow tape speed - or even slower than LP.
This makes recordings on extremely narrow video tracks (..because the tape hardly moves forwards while the spinning recording head turns round..) which may not quite co-incide with the exact head position of another camcorder ..i.e; the tolerance is too fine to match properly.
Most manufacturers mention this ..in very obscure language.. in their camcorder manuals, saying that LP tapes from other camcorders might not play properly, or tapes recorded in LP mode might not play in other camcorders.
Most (all?) Sony DV camcorders will play back footage recorded faster than normal, on 'professional' 'DVCAM' recorders. These tapes move faster through the camera than ordinary DV, so they produce a wider track which is less likely to cause signal 'drop-out' failure. I don't know if other makes of camcorder can play back DVCAM material.
If the "foreign" tapes were shot at DVCAM speed (..e.g; on a Sony PDX10 camcorder, or similar), then although they should play back in other, normal 'domestic' Sony cams, they might not play back in another make of camcorder. Could these be DVCAM tapes?
Finally, it might also be that the "foreign" tape really is a Foreign tape: i.e; the recording was made to a different standard. So if it's an American-recorded (NTSC) tape and it's played in a UK (PAL TV system) camcorder, the frame-rate will be wrong, the number of scan-lines will be wrong, the colour info will be wrong, etc. [..But as you mention "fields", you probably know enough not to have made that mistake.]
NOTE: Ooops, sorry, Karl: we must have both been typing at the same time ..didn't mean to step on your toes.

Odd Problem With MDT 2012 Deployment

Disclaimer: I'm an MDT n00b and barely know how to do anything other than the basics.
The odd problem: Computers that I deploy Windows 7 to using MDT will NOT (after deployement is complete) pass credentials to our proxy (Smoothwall - NTLM Authentication) and cannot not access the internet. It doesn't matter the flavor of Windows
7: 32bit/64bit or Pro/Ultimate same result. Does this on an unpatched machine with only IE8 or a fully patched machine with IE9. I've diddled all the security and connection settings in IE that I know to diddle with the same result. And it's not
just an IE problem. It does it with Firefox, too. Now getting to intranet sites is no problem... this is strictly an internet proxy authentication issue.
Now... why am I asking the MDT forum about this? Because I can load Windows 7 the old fashioned way with a DVD made from the same ISO that I used when setting up MDT and it works fine.
So MDT must be doing something differently when deploying Win 7. As a side note, when I deploy Windows 8 using MDT we do not have this issue. Maybe Microsoft just wants me to upgrade? :)
Everything else about the computer seems quite normal. No undetected drivers. Windows activates normally. I can join the domain either during or after the process. Install applications automatically. I mean the whole MDT process
seems to be working great otherwise.
Help? Please?

Yes, I found a way to undo this in my environment without needing to reimage all of the computers.
There are two problems:
1. GP items in the Administrative Template were modified.
2. GP items in the Security section were modified.
Problem 1
To address problem #1 delete the folder "%SystemRoot%\System32\GroupPolicy":
rd /s /q "%SystemRoot%\System32\GroupPolicy"
Problem 2
To address problem #2, it gets a little more complicated since there is no easy way to "revert" to the default in Win7. The only workaround is to import new settings. To accomplish this, I ran the following from a FRESHLY installed non-domain
joined computer that did not have the local GPO pack applied:
secedit /export /cfg secConf.inf
Then on the "bad" system that had the local GPO applied, I ran:
secedit /configure /db secedit.sdb /cfg secConf.inf /overwrite /quiet
I also found that I needed to delete the following keys since they did not exist on my safe/good image:
reg delete "HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\System" /v "DisableCAD" /f
reg delete "HKLM\System\CurrentControlSet\Control\Lsa" /v "LmCompatibilityLevel" /f
reg delete "HKLM\System\CurrentControlSet\Control\Lsa" /v "SCENoApplyLegacyAuditPolicy" /f
And for some reason (and this was not consistent), I also found that I needed to delete the following on some systems:
reg delete "HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU" /f
Full Solution
Here is everything I ran against my "bad" systems that were domain joined in production use:
Batch File
rd /s /q "%SystemRoot%\System32\GroupPolicy"
secedit /configure /db secedit.sdb /cfg "%~dp0SecurityPolicies-Defaults.inf" /overwrite /quiet
reg delete "HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\System" /v "DisableCAD" /f
reg delete "HKLM\System\CurrentControlSet\Control\Lsa" /v "LmCompatibilityLevel" /f
reg delete "HKLM\System\CurrentControlSet\Control\Lsa" /v "SCENoApplyLegacyAuditPolicy" /f
reg delete "HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU" /f
SecurityPolicies-Defaults.inf
[Unicode]
Unicode=yes
[System Access]
MinimumPasswordAge = 0
MaximumPasswordAge = 42
MinimumPasswordLength = 0
PasswordComplexity = 0
PasswordHistorySize = 0
LockoutBadCount = 0
RequireLogonToChangePassword = 0
ForceLogoffWhenHourExpire = 0
NewAdministratorName = "Administrator"
NewGuestName = "Guest"
ClearTextPassword = 0
LSAAnonymousNameLookup = 0
EnableAdminAccount = 1
EnableGuestAccount = 0
[Event Audit]
AuditSystemEvents = 0
AuditLogonEvents = 0
AuditObjectAccess = 0
AuditPrivilegeUse = 0
AuditPolicyChange = 0
AuditAccountManage = 0
AuditProcessTracking = 0
AuditDSAccess = 0
AuditAccountLogon = 0
[Registry Values]
MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Setup\RecoveryConsole\SecurityLevel=4,0
MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Setup\RecoveryConsole\SetCommand=4,0
MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\CachedLogonsCount=1,"10"
MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ForceUnlockLogon=4,0
MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\PasswordExpiryWarning=4,5
MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ScRemoveOption=1,"0"
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\ConsentPromptBehaviorAdmin=4,5
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\ConsentPromptBehaviorUser=4,3
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\DontDisplayLastUserName=4,0
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\EnableInstallerDetection=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\EnableLUA=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\EnableSecureUIAPaths=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\EnableUIADesktopToggle=4,0
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\EnableVirtualization=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\FilterAdministratorToken=4,0
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\LegalNoticeCaption=1,""
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\LegalNoticeText=7,
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\PromptOnSecureDesktop=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\ScForceOption=4,0
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\ShutdownWithoutLogon=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\UndockWithoutLogon=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\ValidateAdminCodeSignatures=4,0
MACHINE\Software\Policies\Microsoft\Windows\Safer\CodeIdentifiers\AuthenticodeEnabled=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\AuditBaseObjects=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\CrashOnAuditFail=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\DisableDomainCreds=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\EveryoneIncludesAnonymous=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\FIPSAlgorithmPolicy\Enabled=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\ForceGuest=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\FullPrivilegeAuditing=3,0
MACHINE\System\CurrentControlSet\Control\Lsa\LimitBlankPasswordUse=4,1
MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec=4,536870912
MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec=4,536870912
MACHINE\System\CurrentControlSet\Control\Lsa\NoLMHash=4,1
MACHINE\System\CurrentControlSet\Control\Lsa\RestrictAnonymous=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\RestrictAnonymousSAM=4,1
MACHINE\System\CurrentControlSet\Control\Print\Providers\LanMan Print Services\Servers\AddPrinterDrivers=4,0
MACHINE\System\CurrentControlSet\Control\SecurePipeServers\Winreg\AllowedExactPaths\Machine=7,System\CurrentControlSet\Control\ProductOptions,System\CurrentControlSet\Control\Server Applications,Software\Microsoft\Windows NT\CurrentVersion
MACHINE\System\CurrentControlSet\Control\SecurePipeServers\Winreg\AllowedPaths\Machine=7,System\CurrentControlSet\Control\Print\Printers,System\CurrentControlSet\Services\Eventlog,Software\Microsoft\OLAP Server,Software\Microsoft\Windows NT\CurrentVersion\Print,Software\Microsoft\Windows NT\CurrentVersion\Windows,System\CurrentControlSet\Control\ContentIndex,System\CurrentControlSet\Control\Terminal Server,System\CurrentControlSet\Control\Terminal Server\UserConfig,System\CurrentControlSet\Control\Terminal Server\DefaultUserConfiguration,Software\Microsoft\Windows NT\CurrentVersion\Perflib,System\CurrentControlSet\Services\SysmonLog
MACHINE\System\CurrentControlSet\Control\Session Manager\Kernel\ObCaseInsensitive=4,1
MACHINE\System\CurrentControlSet\Control\Session Manager\Memory Management\ClearPageFileAtShutdown=4,0
MACHINE\System\CurrentControlSet\Control\Session Manager\ProtectionMode=4,1
MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems\optional=7,Posix
MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\AutoDisconnect=4,15
MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\EnableForcedLogOff=4,1
MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\EnableSecuritySignature=4,0
MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\NullSessionPipes=7,
MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\RequireSecuritySignature=4,0
MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\RestrictNullSessAccess=4,1
MACHINE\System\CurrentControlSet\Services\LanmanWorkstation\Parameters\EnablePlainTextPassword=4,0
MACHINE\System\CurrentControlSet\Services\LanmanWorkstation\Parameters\EnableSecuritySignature=4,1
MACHINE\System\CurrentControlSet\Services\LanmanWorkstation\Parameters\RequireSecuritySignature=4,0
MACHINE\System\CurrentControlSet\Services\LDAP\LDAPClientIntegrity=4,1
MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\DisablePasswordChange=4,0
MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\MaximumPasswordAge=4,30
MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\RequireSignOrSeal=4,1
MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\RequireStrongKey=4,1
MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\SealSecureChannel=4,1
MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\SignSecureChannel=4,1
[Privilege Rights]
SeNetworkLogonRight = *S-1-1-0,*S-1-5-32-544,*S-1-5-32-545,*S-1-5-32-551
SeBackupPrivilege = *S-1-5-32-544,*S-1-5-32-551
SeChangeNotifyPrivilege = *S-1-1-0,*S-1-5-19,*S-1-5-20,*S-1-5-32-544,*S-1-5-32-545,*S-1-5-32-551
SeSystemtimePrivilege = *S-1-5-19,*S-1-5-32-544
SeCreatePagefilePrivilege = *S-1-5-32-544
SeDebugPrivilege = *S-1-5-32-544
SeRemoteShutdownPrivilege = *S-1-5-32-544
SeAuditPrivilege = *S-1-5-19,*S-1-5-20
SeIncreaseQuotaPrivilege = *S-1-5-19,*S-1-5-20,*S-1-5-32-544
SeIncreaseBasePriorityPrivilege = *S-1-5-32-544
SeLoadDriverPrivilege = *S-1-5-32-544
SeBatchLogonRight = *S-1-5-32-544,*S-1-5-32-551,*S-1-5-32-559
SeServiceLogonRight = *S-1-5-80-0
SeInteractiveLogonRight = Guest,*S-1-5-32-544,*S-1-5-32-545,*S-1-5-32-551
SeSecurityPrivilege = *S-1-5-32-544
SeSystemEnvironmentPrivilege = *S-1-5-32-544
SeProfileSingleProcessPrivilege = *S-1-5-32-544
SeSystemProfilePrivilege = *S-1-5-32-544,*S-1-5-80-3139157870-2983391045-3678747466-658725712-1809340420
SeAssignPrimaryTokenPrivilege = *S-1-5-19,*S-1-5-20
SeRestorePrivilege = *S-1-5-32-544,*S-1-5-32-551
SeShutdownPrivilege = *S-1-5-32-544,*S-1-5-32-545,*S-1-5-32-551
SeTakeOwnershipPrivilege = *S-1-5-32-544
SeDenyNetworkLogonRight = Guest
SeDenyBatchLogonRight =
SeDenyInteractiveLogonRight = Guest
SeUndockPrivilege = *S-1-5-32-544,*S-1-5-32-545
SeManageVolumePrivilege = *S-1-5-32-544
SeRemoteInteractiveLogonRight = *S-1-5-32-544,*S-1-5-32-555
SeImpersonatePrivilege = *S-1-5-19,*S-1-5-20,*S-1-5-32-544,*S-1-5-6
SeCreateGlobalPrivilege = *S-1-5-19,*S-1-5-20,*S-1-5-32-544,*S-1-5-6
SeIncreaseWorkingSetPrivilege = *S-1-5-32-545
SeTimeZonePrivilege = *S-1-5-19,*S-1-5-32-544,*S-1-5-32-545
SeCreateSymbolicLinkPrivilege = *S-1-5-32-544
[Version]
signature="$CHICAGO$"
Revision=1
Thanks to Darren Mar-Elia for leading me in the right direction with this.
Good luck!

FIXED! K8N Plat. SLI: Odd problem Did Reformat Now Won't Post...:/

Heeeellloo MSI community! After all the madness I went through; I followed up on wevsspot's link (see his post) & read the bejeebus outta this thread here.
NOTE: The above link is for all NForce 3/4 Mobo owners w/ RAID problems attempting a reformat/upgrade using Window's XP and then suffering an UNENDING cycle of "quick-flash BSOD + auto reboot" assualts...!
In brief, the solution is:
1) Make a slip-streamed OS CD w/ Nvidia's Nforce 6.70 RAID drivers (or latest version) integrated using Nlite. (not sure about Autostreamer...)
-1) But before that, you must have the latest Bios flashed or these "new" Nvidia drivers won't be recognized during OS installation!
The link above is VERY informative & I would not be here yapping about if it wasn't for the sleuthing abilities of one wevsspot!
Cheers to Indigian & all who've taken the time to post!
Evening all. I usually don't come for help but I feel I've earned a second opinion after working on my PC for 3 days. After all I've done, this issue is really beginning to worry me. On Friday I was playing some SP BF2 and then my PC suddenly restarted. So I started up again & shut down normally and then I fired up CS: Source, after a few maps, another restart.
Hmm, then I uninstalled Nvidia's current graphics drivers and installed the previous version. Tried CS, same outcome. Well, I have reformated my PC before w/ success so I figured "its been several months" & now this issue surfaces so why not?
Well, I backed up and dived in. Had my original MSI Raid driver floppy ready but there was an error so I followed MSI's directions here & loaded up a new floppy and things went fine (I tried both versions- the version at that link & the most current Raid driver version, 5.53 via Nvidia's site. However, for both versions, the file "nvatabus.inf" in which MSI claims to be there is no where to be found). Now fasy-forward to the 1st Window's loading screen (loading bars...) after OS installation, I see a BSOD flash and then restart, and restart, etc...
Facts & POE attempts in no particular order:
-My Bios is the original, 3.1. Apart from the problems I've read here, I have never upgraded it being that I've never really had to.
-I've noticed that rite after OS installation, where I see my status of my Raid config., the version is still 4.81... & then, the damn restarting begins...
-I have tried switching serial ports from 3 & 4 to 1 & 2. Also disabling the unused ports in the Bios after switching. As I switched ports for the 1st time, I even deleted my Raid config. and built a new one.
-I have tried unpluging my pata cables, unpluging my USB devices, & unseating my memory as mentioned in a several threads I read here about seeing a BSOD just before Windows loads.
-Whenever I reformated, I had to remove one of my BFG cards and thus "flipping" over the SLI chip on the mobo. I learned that XP wouldn't load my SLI rig on its 1st run...
-I tried installing XP originally w/ SP1 or slipstreamed w/ SP2, no go.
-Inbetween these hairpulling attemps @ process of elimation, I tried just one of my Maxtors w/ no floppy help and it WORKED. So that points me to this being a Raid issue.
I apologise for the wall of text. I think I have tried all avenues to getting this odd problem fixed. Any advice or instructions would be great. Thanks for reading.

Cowbell,
During your chipset drivers update (or even possibly during the Windows OS install routine itself) you may have corrupted your original Raid Array. My suggestion would be to enter your Raid Setup Bios and delete the existing array the build one from scratch. If you have another computer, extract the RAID drivers from the original MSI setup CD that came with your motherboard and put them on a floppy. Or if you so choose you could use the RAID drivers from a later chipset driver pack. I'll leave that up to you. After you rebuild your RAID array, turn off computer, turn off power supply, remove power cord from power supply,remove m/b battery and move CMOS jumper pin to the clear position. Leave it like that for at least 10 minutes. Move CMOS jumper back to save position. Reinstall motherboard battery and connect power back to your power supply. Reboot and enter BIOS again. Re-enable the SATA or IDE ports you are using for your array, enable RAID in the BIOS. Exit, reboot and enter RAID Bios setup again, make sure your RAID array is present and make sure it is set as a bootable ARRAY. If everything looks good, reboot once more and enter BIOS. Make sure your RAID array is showing as a bootable device. Do the normal stuff such as making sure your optical drive is set as the first boot device etc.
Save, exit. If all goes well you will be prompted to press F6 to install 3rd party RAID drivers upon the initial Windows OS installation routine.
Good luck.

Very strange problem w/ iTunes PC

Well, I have a very strange problem - I added some music to my iTunes and when I was changing the informations and cover, my iTunes crashed. When I restarted the program, the album is missing and when I found it on my hard drive, I am not able to import it back to the iTunes. This happens with both Import from the menu and the classic Drag/Drop method. So what to do? Is there any way to get it back?
EDIT: Tried to move the files to another folder. Didn't work though.

I just found the problem lies with iTunes 7.0.
I ran the sames songs (ones with problem) into iTunes 4.7.1, with MSN messenger (same version)'s song display selected.....the song title/artist displayed and it did not get kicked out!!!!
If it's not my 80gig iPod.......I would not have gotten iTunes 7.0!!!!!!!

I'VE RAN ACROSS A VERY ODD PROBLEM ***iPod syncing trouble***

Similar Messages

Maybe you are looking for

I'VE RAN ACROSS A VERY ODD PROBLEM iPod syncing trouble