I've recently upgraded my system to Mountain Lion, trying to run XCode. I am having the following message: This installation of Xcode 4.2.1 requires Mac OS X 10.7 Lion.
I've recently upgraded my system to Mountain Lion, trying to run XCode. I am having the following message: This installation of Xcode 4.2.1 requires Mac OS X 10.7 Lion.I've recently upgraded my system to Mountain Lion, trying to run XCode. I am having the following message: This installation of Xcode 4.2.1 requires Mac OS X 10.7 Lion. Please advise. Thanks
I've come across the same thing, and went to the Mac App Store and downloaded and installed Xcode through that.
However, it seems to have put the new Xcode.app straight into the Applications folder, whereas before (v 4.2.1) was installed in Developer\Applications\Xcode.app. In fact, it still is!
How do I uninstall everything that belongs to Xcode 4.2.1 from my system, but leaving Xcode 4.4. It seems parts of the new Xcode (4.4) have been put into the \Developer\ folder as well, so it's not obvious what I would need to delete... Can anyone shed some light on this?
Similar Messages
-
I recently upgraded my macbook to mountain lion. Before doing so I used time machine to back up my entire laptop with an external hard drive.
When I got my computer back it was clean....all pics, music, documents, bookmarks etc. are gone. How do I get these files off the external hard drive and back onto my laptop with the new upgrade?I recently upgraded my macbook to mountain lion. Before doing so I used time machine to back up my entire laptop with an external hard drive.
When I got my computer back it was clean....all pics, music, documents, bookmarks etc. are gone. How do I get these files off the external hard drive and back onto my laptop with the new upgrade? -
I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. These same files opened up with no problem prior to my upgrade. Additionally, I had upgraded to the Pro version of Quicktime recently, but it appears I've retrograded back to the basic version, unexplainably.
I get this error message: The document “ANDREW_McD_MEDIA_VERSION.avi” could not be opened. A required codec isn't available.Hi,
I had exactly the same problem & found the answer here https://discussions.apple.com/thread/3219982?start=0&tstart=0 . Download a program called Perian, very easy to download worked a treat. I wish all fixes were this easy - Debbie -
My Mac has a OS X operating system. (10.6.8) How can I upgrade its system to Mountain Lion so I can then add the ICloud? Also, does the ICloud include virus protection for files already on my Mac?
You can purchase and download Mountain Lion in the App Store (in your 'Applications' folder), then just run the installer: however you should first check that Mountain Lion can indeed run on your Mac. Please see this page:
http://www.apple.com/osx/specs/
You might also want to look at this page to see whether any vital applications will be adversely affected:
http://roaringapps.com/apps:table
In particular note that PPC applications such as AppleWorks will not run on Mountain Lion since Rosetta is not included and can't be added. -
I just upgraded my system to Mountain Lion. If I restore my Macbook Pro back to the very beginning state, will the Mountain Lion be removed or not? Thank you
The only problem that I forsee is that some have reported problems getting machine-specific builds of Lion via Internet Recovery. Not sure if it's working yet or not. But you could give it a shot, I suppose. Basically what you want to do is 'prepare your computer for resale' - just like it came out of the box. Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and will paste below:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Good luck,
Clinton -
I have Windows XP and microsoft outlook with Firefox as my browser; when I try to open a link in an email I get the following message "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator"
Tried that. Unfortunately it did not work.
-
Hi, I recently upgraded to OX X Mountain Lion, and now I cannot upload any of my pictures from iphoto or even my desktop to email, etc. After I choose my file and hit "attach file" to upload, it says: "Invalid File Specified". I am using jpg, so I'm confused. Any suggestions?
Not having a media card in your BlackBerry may affect your ability to transfer media files onto it. There is a file size limit of 2.86MB when transferring files into device memory. http://bbry.lv/9XNuy0
Have you verified that the applications you are trying to install are supported by your current wireless provider? Unlocked devices from one provider may not have full functionality on another network.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
I have replaced my hard drive on our 27" Imac and upgraded the op system to mountain lion. Once all done and collected from apple, i have found my word and ecel have expired and are requesting me to repurcahse the items. As they were purchased almost 4 yrs ago I have no idea where the original box or codes / product key / passwords are. What can I do to get around this problem. In addition my time machine only goes back as far as the op system upgrade.
Regards
Tim.Good news - saved you a 2 hour phone call
-
Will I be able to restore and upgrade my macbook if I upgrade to mountain lion. I basically bought a used macbook and I want to make a new administrater password and name but I'd like to know if installing the new Mountain Lion will let me do so easily without having to pay someone to do it for me??
Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
Model Eligibility for Snow Leopard and Lion.
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
Hi,recently bought an apple tv to connect to my macbook,which is recently been upgraded to os x mountain lion version10.8.4.But i can't connect to that with my apple tv.Anyone can help me ????
not all macs support airplay mirror
http://support.apple.com/kb/ht5404
installing mtn lion is not! enough if your video card does not support it then you need to live without mirror or take your chances with airparrot -
Machine Specs
Model Name: iMac
Model Identifier: iMac9,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
So basically I am wanting to make sure I am compatible(pretty certain I am)
And if so, do I need to backup everything?
I have had this machine for several years, so there is much I would need to backup.
I have recently picked up a MacBook Pro, and upgraded tonight to OSX Mountain Lion, everything was fine and still here after install, incl all my programs.
There wasnt much on it so I wasnt bothered if it did get wiped.
I am basically wanting to setup my WDig 2TB Ext HD to run as my media storage and run my music player to play FROM that, to free up disc space and make my machine run better
Hopefully there's not "too much meat in the sandwich" there but hoping someone(s) can help out.If you don't have backups, you need to make some ASAP, preferably even before you finish reading the rest of this message! And you certainly should do so before even considering something like installing a major system upgrade.
As to compatibility, I believe that machine should be compatible, but the easiest way to find out for sure is to just try buying Mountain Lion on the App Store. If the machine isn't compatible, it won't let you, as I understand it. -
I upgraded my iMac to Mountain Lion and it has been painfully slow ever since. Any ideas on what might be happening and how to fix it?
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Otherwise, take the steps below when you notice the slowdown.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
Boot camp lost after upgrading to Yosemite from mountain lion
I lost my windows7 boot camp after I upgrade to Yosemite from mountain lion. When I press ALT when rebooting there is no more alternative to boot for window anymore. I did read some thread about this but my case is different since when I tried to type 3 steps(diskutil.......etc) as LonerT user answers it did not work. The attached files here are what I faced with. Please help. I have a lot of important files in windows
If you look at the GAP between GPT3 and GPT4 it is start/size of 782929176/37595880 but the NTFS header starts at 782929920 according to your Testdisk output shown here.
MS Data 782929920 976773112 193843193
The difference is 782929920 - 782929176 = 744 bytes. You will need to delete the current GPT4 and recreate a new GPT4. Please stop if you see any error messages and post here.
1. Delete the old entry and create a new entry at GPT#4.
sudo gdisk /dev/disk0
p
d
4
n
4
782929920
976773112
0700
p
w
y
Here is an example of the delete/new...
Command (? for help): d
Partition number (1-4): 4
Command (? for help): n
Partition number (4-128, default 4): 4
First sector (34-1954210086, default = 1454210080) or {+-}size{KMGTP}: 1454211072
Last sector (1454211072-1954210086, default = 1954210086) or {+-}size{KMGTP}: 1954209791
Current type is 'Apple HFS/HFS+'
Hex code or GUID (L to show codes, Enter = AF00): 0700
Changed type of partition to 'Microsoft basic data'
Command (? for help): p
Disk /dev/disk0: 1954210120 sectors, 931.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6ED0C429-00D1-4759-B50E-04B6FB80D0E3
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1954210086
Partitions will be aligned on 8-sector boundaries
Total free space is 1293 sectors (646.5 KiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI System Partition
2 409640 1452940543 692.6 GiB AF00 Customer
3 1452940544 1454210079 619.9 MiB AB00 Recovery HD
4 1454211072 1954209791 238.4 GiB 0700 Microsoft basic data
2. This is a tedious process and you want to check after the second 'p'rint command that it looks reasonable, before the 'w'rite and 'y'es to confirm.
3. You will need to reboot after the change, because the disk you are booted from is the one being modified. Reboot will rebuild disk0s4 using the start/end you entered.
4. Run the dd command - sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C and check that the first line contains "R.NTFS".
5. Once you have a working GPT#4, a new hybrid MBR needs to be created which will overwrite what you see in your Fdisk output. This is also done using GPT Fdisk (Gdisk). Your numbers will look different than what are in the following example. In most cases, you will use the default except entry 4, which should have a 'y' for bootable flag.
sudo gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.10
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Command (? for help): p
Disk /dev/disk0: 490234752 sectors, 233.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 59BDFEEB-1EB4-4529-94FE-3CBC2C3CD513
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 490234718
Partitions will be aligned on 8-sector boundaries
Total free space is 2604 sectors (1.3 MiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EF
2 409640 401060383 191.0 GiB AF05 Macintosh HD
3 401060384 402329919 619.9 MiB AB00 Re
4 402331648 490233848 41.9 GiB 0700 Microsoft basic data
Command (? for help): r
Recovery/transformation command (? for help): h
WARNING! Hybrid MBRs are flaky and dangerous! If you decide not to use one,
just hit the Enter key at the below prompt and your MBR partition table will
be untouched.
Type from one to three GPT partition numbers, separated by spaces, to be
added to the hybrid MBR, in sequence: 2 3 4
Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): y
Creating entry for GPT partition #2 (MBR partition #2)
Enter an MBR hex code (default AF): AF
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #3 (MBR partition #3)
Enter an MBR hex code (default AB): AB
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #4 (MBR partition #4)
Enter an MBR hex code (default 07): 07
Set the bootable flag? (Y/N): y
Recovery/transformation command (? for help): w
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/disk0.
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Warning: The kernel may continue to use old or deleted partitions.
You should reboot or remove the drive.
The operation has completed successfully.
6. a. Test 1 - Can you see your Bootcamp volume in Finder.
b. Test 2 - Can you files in the Bootcamp volume?
c. Test 3 - Can you see Bootcamp in your System Preferences -> Startup Disk.
d. Test 4 - If Test 1-3 are successful, select Bootcamp and click on Restart. You may need Windows startup repair, if you see a hanging underline cursor at the top left corner of your screen. In most cases, it is not required.
Here is an example...
Command (? for help): d
Partition number (1-4): 4
Command (? for help): n
Partition number (4-128, default 4): 4
First sector (34-1954210086, default = 1454210080) or {+-}size{KMGTP}: 1454211072
Last sector (1454211072-1954210086, default = 1954210086) or {+-}size{KMGTP}: 1954209791
Current type is 'Apple HFS/HFS+'
Hex code or GUID (L to show codes, Enter = AF00): 0700
Changed type of partition to 'Microsoft basic data'
Command (? for help): p
Disk /dev/disk0: 1954210120 sectors, 931.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6ED0C429-00D1-4759-B50E-04B6FB80D0E3
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1954210086
Partitions will be aligned on 8-sector boundaries
Total free space is 1293 sectors (646.5 KiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI System Partition
2 409640 1452940543 692.6 GiB AF00 Customer
3 1452940544 1454210079 619.9 MiB AB00 Recovery HD
4 1454211072 1954209791 238.4 GiB 0700 Microsoft basic data -
Can I upgrade my iPad 1 to the ios5, and can I upgrade my snowleapord to mountain lion on my Mac book pro so that I can icloud my iPad, Mac book and iPhone 4s.pls help
Can I upgrade my iPad 1 to the ios5,
Yes.
... and can I upgrade my snowleapord to mountain lion on my Mac book pro
Maybe.
Read here for Mountain Lion's system requirements: http://support.apple.com/kb/HT5444 -
After upgrading macbook pro from mountain lion to mavericks computer performance slowdown
after upgrading macbook pro from mountain lion to mavericks computer performance slowdown
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Maybe you are looking for
-
Hi, We are facing problem with Report Painter program. we developed one report in report painter program in CO. we are taking the report painter date into customised program and we are doing some calculations. From KE30 Transcation we can execute the
-
Is there an app to view my Mobile Me galleries? Thanks, Ke n
-
Windows 7 64-bit hangs completely after some minut...
Hi all, My Windows 7 64-bit machine hangs completely after some minutes using Nokia Suite 3.3.89 connected with a E72 through USB cable. When connecting, everything goes fine and I can usually synchronize data successfully between the E72 and compute
-
Functionality for MMBE transaction
hi, I need a functionality in which i need to simulate mmbe transaction with the plant and storage locations mentioned in selection parameters of a report program. All categories of stock are required except returns stock i.e. Unrestricted, Blocked,
-
Audio sync issues within project, same issues not replicated on FCE
I am having very frustrating issues with PRO. I recently shot footage on a GO PRO HD HERO in 30 and 60 fps, then converted this footage to ProRes 4444, best quality. In my project, the audio appeared in sync, but then eventually drifted out of sync,