I've recently upgraded to OS 10.6.8 and now can't get my Corel Painter IX to run.
:II've recently upgraded to OS 10.6.8 on my desktop and have had to reinstall all my software programs. I can't seem to get my Corel Painter IX to run. It appeared to install correcly and will open momemtarily, but then stops the process and shuts down. I've searched the Corel help site and can't seem to find any help. Anybody else encounter this issue? I know it's an old version and I should upgrade, but this version suits my needs and I honestly don't have an extra $199 to upgrade. Any help is appreciated. Thank you in advance.
Terri Shaver
Mid-Michigan
Message was edited by: shavert
That version will not run on 10.6. The new X3 does. Contact Corel to see about an upgrade.
Similar Messages
-
I recently picked up a new iPhone6. Before i handed in my old phone(iphone5), I backed it up using iCloud.
Now I can't seem to get the photos from my old camera roll onto my new phone or my Mac. Did I lose all
the photos from my old phone?1. Create a backup of your iPad to iTunes on your computer or to iCloud
2. Transfer any and all photos & videos on your iPad to your computer.
3. Erase the iPad and restore the iPhone's iCloud backup to the device.
4. Transfer any and all photos & videos on your iPad to your computer.
5. Restore the iPad backup you reated in step #1 back to the iPad. -
I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?
Hi,
PSC 1315 no longer supported for scanning since Mac OS X v10.5 or while using any newer OS, there is no scan software provided by either HP or Apple (Image Capture)
You may find this information stated below for Leopard, the same apply for any newer OS version:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01234231&cc=us&dlc=en&lc=en &os=219&product=374568&sw_lang=
Image capture will not recognize your device as well, only print is supported as you may find listed for teh PSC 1310 Series below:
http://support.apple.com/kb/HT3669#HP
Although there is no official scanning support for your device you may still try the 3rd party VueScan software which list your scanner as supported and compatible with Mountain Lion:
http://www.hamrick.com/vuescan/hp_psc_1310.html
Shlomi -
I recently upgraded to iOS 7.0.3 and now my iPhone 4S will only sync purchased music to my phone from iTunes. Help! I have TONS of music that I have bought and burned to my computer, but cannot listen to it on my iPhone. This seems ridiculous!
Also, it's taking FOREVER (over an hour) to sync my iPhone to iTunes...
-
I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?
I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple. -
Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"
Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel -
I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?
SSign in to the App Store using the Apple ID that was used to purchase the software.
-
I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, however the arrows will move it OK. Also I cannot drag the selection to another photo in the photo bin as before.
Hi,
Please refer: http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
Thanks,
Anwesha -
I recently upgrade my mac air to maverick and now my version of iphoto won't work. What can I do??
I recently upgrade my mac air to maverick and now my version of iphoto won't work. What can I do??
This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1
OT -
I recently upgraded my phone to 5.0 and now cannot access my ringtones theat were purchased. They are in my itunes on the desktop but won't sync to my phone. Any suggestions??
OK. In iTunes on the computer, since you have the ringtones there, one simple method to try would be to drag them to the desktop, and then directly from the desktop to your phone in the Devices menu in iTunes.
-
I recently upgraded my IPAD to the ios5 and now my already downloaded music videos only play the music and no video plays. any suggestions?
When you say that the orientation lock doesn't work, we have no way of knowing if that means that the screen is locked in one position only, or that it will not lock in one position only. So try something g very basi and reboot your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
In the camera app, you have to swipe up and down on the screen to move between photo, video and the square photo mode options, so are you even in the correct mode to take videos? -
I recently upgraded to IOS5 on a 3gs and now my phones bust. My music is really slow and on some songs despite deleating and reuploading, my phone crushes each time i try to play them. i cant scroll music and my wifi is not working either whats going on?
Hi imobl,
Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff. -
I recently browsed ITunes UK store and now can't get back to my iTunes US store. The UK store won't accept my email address as it is in use. So, effectively, I can't make an iTunes purchase. And, this password changing is madness. Everytime I sign in iTunes doesn't recognize my password and so I have to get a new one even though I've answered the useless security questions. Has anyone solved this problem before?
Funny how this seems to be one of the most-asked questions on the Internet. In most cases, no answer is ever checked as "Correct," either. Most answers, as on this page, say to click the flag at the bottom right-hand corner of any store page. The problem? There's only one flag!!! And it's the one of the country we don't want to be in!!!
Just in case this helps someone: what worked for me was to sign in. It then told me my id was not valid for this country, and switched me back to the US. How I was ever able to buy something from the UK store in the first place is beyond me.
By the way, Apple, experiences like this, and many, many other horrible ones with iTunes, is why those of us who do not live in the Apple world continue to stick to their Microsoft PCs. -
iPhone 4, stopped 6.0 upgrade in the middle of install, and now I just get the blinking apple. Can't even get it to restore or recognize my phone when I plug into the computer/itunes....
Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore
-
Please help. After a recent iOS7 update my iMessages are gone and I can't get it back, nor can I log into my Apple ID. MY PASSWORD is not expired. iPhone 4.
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Maybe you are looking for
-
XMP metadata from Flashbuilder why not visible in Adobe Bridge?
Hi there, I'm currently wondering around XMP metadata and swf files. A: Flash CS5: works When I use the XMP panel in Flash CS5 and export a swf, open Adobe Bridge CS5 and select the file, the XMP data are correctly displayed. B: Flash Builder(Flex 4.
-
I want to edit Pictures that are on my External Hard Drive Using iPhoto without having to import them every time, it was suggested to me to use Aperture. any advise is appreciated
-
SMTPD consumes all available RAM resources
Hi all, I have a mail server that has extremely heavy disk activity after a few minutes of being booted, I have narrowed this down to heavy RAM usage by the SMTPD process. In Activity monitor, multiple SMTPD processes are spawned, consuming up to 2GB
-
Getting a message when deleting a vendor in u0091xk06u0092 .
If there is a PO out there with vendor A. but no GR or IR for it and when we try to delete that vendor using xk06. It doesnt give any message. But if there is a IR for that PO it gives a message saying there are open items. Is there a message I
-
Intermittent "Load Report Failed" error on IIS6 ASP 4.0
I can run reports designed in Crystal 2011 and embedded in VS2010 designed web pages on a Windows 2003 SP2 server every day. However, once every 2 - 3 days I get a "Load Report Failed - A document processed by the JRC engine cannot be opened in the