I've remapped the Function key to show desktop, can't undo.

As the title says, I remapped this key to the show desktop feature. Now when I want to use the function keys I have to use them blind as the windows disappear when I try to use it!
I've reset all keyboard shortcuts in Keyboard. I've made sure that "show desktop" under mission control is not set to function either.
Any ideas?

https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Mac
thank you
and this for adobe:
http://kb2.adobe.com/cps/908/cpsid_90893.html
thanks again

Similar Messages

Remapping the function keys

I make extensive use of the screen shot function "Command—Shift—4" where I can then select an area of the screen and generate a clipped picture. The onset of arthritis has made extensive use of this finger aerobics difficult. As my F5 and F6 function keys are not needed I was hoping there was a way of remapping them to take the Command—Shift—3 and the Command—Shift—4 functions so I just have to hit one key for each of those. Thanks for the input.

Probably not doable, since there's no application menu option that you can choose to reset it via System Preferences->Keyboard->Keyboard Shortcuts. However, there is a Capture Selection From Screen service under Services->Pictures that you could add a shortcut to that might do the trick. You'll have to try it out.

How can I use Automator to toggle the Function Keys?

I am trying to create a Automated process to toggle the Function Keys on my keyboard. This is because I use several programs, including After Effects, which use the F1-12 keys, but when I am not using that program I commonly use the Apple-defined shortcuts on the keyboard. I have a full-sized keyboard, hence no Fn key. So that's out right away – I've read several comments on this topic where people suggested that this is the ONLY option. I refuse to beleive that.
Automator contains a "Watch Me Do" feature, which I have tried to use to record this process. Problem is, it never clicks the right object. If I record clicking the dock, the magnification (I suspect) throws off the virtual-controlled mouse and picks the wrong object. If I record the Apple Menu route, it gets it about 1/2 the time.
I think what I'm really looking for is a console command I can feed into the Terminal which toggles the keys. It seems to be that this HAS to be an option, even if it is more than one line of commands. I believe if I can feed this process into Automator, it would work.
Any ideas?
Thanks in advance, Mac Geniuses!

iKey lets you define function keys per application. You seem to want to turn on & off the defined apple keys. Not sure if these keyboard re-mappers will do the trick.
Here is my other most favored application. Of course, I haven't checked these out in newer OS's. I'm a Tiger man myself.
iKey is a front end program that simulates typing and mouse movements. I use iKey to remap the Function keys.
"iKey is an automation utility, a program that creates shortcuts to accomplish repetitive tasks. In essence, an iKey shortcut is a little program in its own right, but you don't need to know the first thing about programming to create an iKey shortcut. All you have to do is put together three necessary parts of a shortcut: One or more commands that give the shortcut its functionality, a context in which it runs, and a launcher that defines how the shortcut is activated."
http://www.scriptsoftware.com/ikey/
iKey has a little more function then the previous free version called youpi key. For many years, I used youpi key before switching to iKey. It works fairly well for me in MAC OS 10.4 although not officially supported. The youpi key download is hard to find & no longer here.
http://www.versiontracker.com/dyn/moreinfo/macosx/11485&vid=75326
( Send me a message for a copy of youpi key. )
*Examples:*
I have the common programs that I use assigned to function keys. I have F4 assigned to Firefox. When I want to start FireFox, I press F4. When I want to switch to firefox, I press F4! Starting & switching to an application in Mac OS are the same thing in Mac OS.
Here is an example of to assign volumn control to a function key.
http://discussions.apple.com/message.jspa?messageID=10361085#10361085
Here is my script for listing my application folder. I have it assigned to function-key 6.
tell application "Finder"
   open folder "Applications" of startup disk
   select Finder window 1
   set bounds of Finder window 1 to {-3, 44, 691, 545}
   --set position of Finder window 1 to {33, 44}
   set position of Finder window 1 to {60, 45}
   activate
end tell
The second portion of this script was generated in the script editor record mode. After I recorded the script and did some editing, I copy the script to ikey/youpi key.
Full Key Codes
http://download.cnet.com/Full-Key-Codes/3000-2094_4-44175.html
Spark
"Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, command iTunes, and more... You can also export and import your Hot Keys library, or save it in HTML format to print it. Spark is free, so use it without moderation!"
http://www.versiontracker.com/dyn/moreinfo/macosx/22675
Mac OS X remap or rename keyboard keys
by vivek
So how do you remap or rename keyboard keys under Mac OS X?
Simply use DoubleCommand software. It is a free program
http://theos.in/apple/download-doublecommand-to-remap-keyboard-keys/
Keyboard Maestro is a powerful macro program for Mac OS X (including Tiger and Leopard) which has received glowing reviews. Keyboard Maestro will take your Macintosh experience to a new level in “Ease of Use”. With Keyboard Maestro you can design a custom action sequence with your own shortcuts and use them at any time, you can navigate through running applications and open windows with Program Switcher, and you can work with an unlimited number of clipboards - all by pressing simple keystrokes.
http://www.keyboardmaestro.com/main/
"Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, command iTunes, and more... You can also export and import your Hot Keys library, or save it in HTML format to print it. Spark is free, so use it without moderation"
http://www.versiontracker.com/dyn/moreinfo/macosx/22675

For some reason the function keys on my mac book changed, I restored them and now the shift keys have the function of showing the desktop and all windows. I there a way I can restore the original function?

For some reason the function keys on my mac book changed, I restored them and now the shift keys have the function of showing the desktop and all windows.
I there a way I can restore the original function?

You do not tell us what OS version you have. In OS 10.8.2, do this:
Apple Menu / System Preferences / Language and Text / Input Sources.
Select the language you want. Mine is set to Canadian English.

Can I remap the fn key on a Powerbook?

Extraordinarily, Apple designed the keyboard layout for laptops so that the function key (fn) is on the opposite side of the keyboard to the cursor keys. So if you want to use Home, End, PageUp, or PageDown, as most of us do, then you have to use two hands as the fn key - far left - is too far from the cursor keys - far right.
Is there a way to remap the keyboard to swap the Enter and fn keys around? I rarely use Enter, but use fn a lot as described above.
While on this subject, can I remap to get a forward delete, which I used more than backspace on a full size keyboard?

I've posted this question AFTER finding out the answer, but I'd love for other users with the same problem to know that there is a solution.
This donateware will allow some keyboard remapping - http://doublecommand.sourceforge.net/ - although I couldn't swap the Enter and fn keys, I could convert the Enter key to work as the fn key but only when used with the cursor keys (which is actually a better solution anyway).
It also allowed me to convert the backslash key to work as a forward delete.

Remapping the Fn key in Windows * a solution *

Howdy,
If you own a Mac and you're running Windows via Boot Camp, it's likely that you've noticed that there are problems with the operation of the Fn key. Because the keyboard doesn't have a Delete key, it's extremely annoying that you can't use Fn+Backspace in order to get the Delete function.
As discussed in this thread it's possible to remap normal keys on your keyboard with a remapping tool like AutoHotKey. Unfortunately this application doesn't recognize the Fn key by default, so you're still stuck with other key combinations like Command+Backspace = Delete.
I don't use Boot Camp on my MacBook, but I do have a PC with Windows XP. I recently purchased an Apple Wireless Keyboard, which is basically identical to my MacBook keyboard. Using it in Windows is no problem, but the Fn and Eject key both don't work. So I suppose the problem is the same for users of Windows through Boot Camp.
First I used AutoHotKey to remap Command+Backspace to Delete. But I couldn't get over the fact that there were two keys that I couldn't use. So I kept looking for a solution, and finally found one. Using a DLL file for adding support for Human Interface Devices, written by one of the AHK forum members, I was able to get a response back from my Fn and Eject key. I wrote a script that let's you alter the behavior of the Fn key, so it will act as a modifier.
At this point my Fn key is fully functional, and I mapped all the basic OS X functions so they can be used in Windows. So whether I'm using Leopard on my MacBook or Windows on my PC, everything is the same. This means:
Fn+Backspace = Delete
Fn+F10 = Mute/Unmute
Fn+F11 = Volume Down
Fn+F12 = Volume Up
Eject key ejects my drive (without or with a delay just as in OS X)
And so forth.
Because the Fn key question is a common problem for a lot of people, I decided to write a full guide explaining every step of the way in full detail. The guide can be found right here:
Mystery of the Fn key - A guide to remapping the Fn key in Windows
The DLL used to retrieve information from the Fn and Eject key has already been used for many other purposes, and made it possible to map a lot of different keys on many different keyboards and other devices like mice and remote controls. By doing so it has proven its worth, and I'm sure that you'll be able to get your Fn key and other special keys working just fine. Whether it's on your Mac using Boot Camp, on a PC with using a keyboard with special hotkeys or on a PC notebook. The guide is based on remapping my Apple Wireless Keyboard, so at least I'm sure that it'll work for Apple keyboards.
Feedback on my guide and script and whether you succeeded remapping your Fn and Eject key is much appreciated.
Good luck!

Well I tried but none of the settings recognized Fn nor Eject on my MBP (penryn w/ OSX and Vista). I even ran through dozens of possible Usage/Page combinations. My other keys were recognized and so what my mouse/trackpad. But not Fn and Eject.
As you state in the write-up "If your key isn't recognized by one of the devices and their settings as listed in the application, it's unfortunately not likely that you'll get your key to work."
Thanks anyway. I really thought I found the answer in this thread...
oh well.
D'
PS. It really shouldn't be this hard to delete email using one hand....

I am using Firefox for Mac (v 3.6.11, Mac OSX 10.6.4) and need to use the Function keys (specificlaly Ctrl-F7) in a web application. I can't seem to get it to work the same as in Firefox on PC.

I am using a web application that requires the use of the F7 key. Actually, to be more precise, I need the functionality that you would get on a PC if you hit Ctrl-F7 while in this web application in Firefox. I have changed the Mac's settings to allow standard use of the function keys (rather things like volume up/down, etc.) However, when I try to use Ctrl-F7 it appears to be using the function that is built into Firefox browser rather than the web application running within Firefox. (FYI, nothing happens when I try Cmd-F7 or Alt/Option-F7 either).

Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.

How to use the Function keys as function keys instead of action keys?

When I press F1 or any of the other F keys it does what the symbol says on the key (volume/skip track etc).
How do I actually use the F keys and not the symbols?

Hi again John,
...is there a way to switch that around so I use the "fn" key for sound etc?
Do the following:
1. Fire up System Preferences
2. Select Keyboard & Mouse
3. Select the Keyboard tab.
4. Tick the "Use all F1, F2, etc. keys as standard function keys" box.
That's it. You have now reversed the default use of the function keys. If you need to increase/decrease sound, brightness etc then press 'fn' plus the appropriate function key.
Kryten

Hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to

hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to click on the fn + function key

Hi,
You can change this in your system bios as described in the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02035108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

The function key in my Satellite C660 is not working

The function key in my Toshiba Satellite C660 is not working except for volume.
That problem appeared after i changed something in the startup programs and uninstalling as i remember tvap and no button support appears in my start up programs :(

That unbelievable I did something wrong..
First of all you have to install VAP. Then reboot the notebook.
Download and install Flash Cards Utility and reboot the notebook again.
Now go to Start -> All Programs -> Toshiba -> Utilities -> Flash Cards and restart this software.
Now the FN buttons should work.
But before you would start the whole installation, you should uninstall the VAP and Flash Cards and should clean the registry using CCleaner as suggested by some users hare in the forum!

Is there a way to Change the Function keys on a bluetooth keyboard for ipad

I just got kensington wireless keyboard for my ipad 2 but the program that i am using dosent allow me to use the function keys instead for volume, brightness ect.

I have had to explain often that no pressure is needed. It's a "touch" screen, not a "press" screen. Most people believe they have to push down hard to make some sort of contact.

What are all the Function Keys for on my new KU-0841?

I just got an HP KU-0841 Keyboard and want to know what the Function Keys are for F1-F12.
Where can I learn about how to use them? Thanks

Hi,
Depending on application, or game. For example on one application which I use daily
F1 = Help (nearly all applications use this),
F2 = Slpit screen
F3 = End
F4 = Expand
F5 = Find / Re Find
F6 = Change
F7 = Up
F8 = Down
F9 = Swap
F10 = Left (one screen)
F11 = Right (one screen)
F12 = Cancel
Again, DEPENDING ON applicantion, you have to learn from application. Some applications allow you to re-program those keys.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it

I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.

**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone.

Brand new 15" MacBook Pro Retina - unplugged from Thunderbolt Display and Keyboards today find keyboard alpha-numerics not working; except the function keys, delete key, tab key, command/ctrl/shift/alt/fn and arrow keys; and 7/8/9/u/o/j/l nudge cursor

Brand new 15" MacBook Pro Retina - unplugged from Thunderbolt Display and Keyboards today find keyboard alpha-numerics not working; except the function keys, delete key, tab key, command/ctrl/shift/alt/fn and arrow keys; and 7/8/9/u/o/j/l produce cursor nudges.

It's a new machine - and the Thunderbolt Display is meant to work with it. You need to just make an appointment at your local Apple Store and have them fix whatever is wrong.
If you like, you could always try a SMC reset and a PRAM/NVRAM reset to see if either of those will get your keyboard back in working order...
Clinton

I've remapped the Function key to show desktop, can't undo.

Similar Messages

Maybe you are looking for