I've restored manufacture settings on my iphone 4, but never updated the software. How do I unlock it now?
I received my upgraded phone, so restored my manufacture settings on my old iphone 4 so that I could sell it. I never updated the software on the iphone 4. The phone is now locked and just informs me to plug into itunes or make emergency call. When I plug into itunes nothing happens. How do i unlock it??
Hello macks87,
After reviewing your post, I have located an article that can help in this situation. It contains helpful advice concerning Activation Lock which may be the reason you're having issues:
iCloud: Activation Lock
http://support.apple.com/kb/PH13695
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD
Similar Messages
-
Hi everybody, I need help.
I requested an unlock from T-mobile UK 1.5M ago, and after the restore I got the message that my iphones carrier setttings were updated successfully, but never get the message that it's unlocked. And it still doesn't support nay other SIM. What am I doing wrong? How do I get it unlocked?
Thanks in advance for adviceDid you restore the phone as a new device when you did the restore/unlock, or did you restore it from an existing backup? I have found that when unlocking an iPhone on the AT&T network, you don't get the message that the unlock was successful if you don't restore as a new device. The unlock still works, you just don't get the message. Perhaps it is not carrier specific for this behavior.
-
I have an iPhone 4 and recently updated the software. Since then, the screen will not turn off consistently after the 1 minute auto-lock. How do I fix this?
Settings>General>Auto Lock
-
I updated the software on my iPad mini and now the FaceTime app is missing. How do I restore it?, I updated the software on my iPad mini and now the FaceTime app is missing. How do I restore it?
Check settings an make sure FaceTime is turned on and addresses are configured (Settings app > FaceTime)
Check all of your home screens and folders. It could have been inadvertantly moved (you can also use Spotlight search to check fior it: Swipe down form the home screen. This will also let you know it it is in a folder) -
Forgot the passcode to my ipad. When I went to restore it, it asked me if I wanted to update the software so I said yes. It then went into recovery mode, I'm guessing, with the connect to iTunes showing on the screen. Now iTunes will not recognize it so I have no idea how to get it back! Help!!
Then you will need to try restoring it once more:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
My iMessage is not working, i have an iPhone 4s and just updated the software to iOS 5.1
I turned my phone off and on again and it works now.
-
Hi, cant update IO6. After downloading the update and processing it through Itunes on my mac.... and I have a factory unlocked Iphone 4S. Cant update the software. Waring message is say this devise is not eligible for build. Please help.
Download iTunes using the tab at the top of this page. Then run the update with iTunes closed.
-
HT1222 my iphone 4s stuck when im updating the software,how can i fix that?
my iphone 4s stuck when im updating the software,how can i fix that?
No iPhone records voicemail messages. Visual voicemail is simply an interface to the carriers voicemail servers.
Contact the carrier to troubleshoot the issue with their voicemail. -
Do i need to install the iTunes in my iPhone and backup before update the software version?
do i need to install the iTunes in my iPhone and backup before update the software version?
No itunes on your computer.
-
curious about the iOS 5 software that is coming out. If I wait til its release to buy my iPhone 4 will it come with the iOS5 software already on it? or should I go ahead and buy my iPhone 4 and then update the software when the iOS5 is released?
Keaten wrote:
Yea I would have to say wait until the release of IOS 5, because the phone will probably run it a lot smoother. I mean go ahead and buy the Iphone 4 if you are dying to have it, because you can just update it which is no big deal at all, but it would be the smarter thing to wait for the new updates.
And the networ issue as far as I am aware is fixed on the Verizon iPhones, so it really depends on which service you have.
- correct me if i am wrong
Have to disagree here, Apple have not even announced an iphone 5, it is pointless to speculate that we will see one or not see one until Apple actually releases a statement. ios was built and tested on the iphone 4 so there will not be any slowdown or laggyness compared to a phone that has not been released yet.
If we are advising potential apple product buyers then we should not be putting them off buying a iphone 4 on speculations alone. Just because apple have for the last few years released an iphone every june/july does not mean then have to stick to this approach.
Apple have not issued any statement regarding an iphone 5, until this time it does not exist, only in heresay on the internet.
Any one looking to get an iphone 4, to you i would say waiting until ios 5 is released is a personal choice, no matter if you wait or not you will be able to update via itunes. One way or another in the future you will have to do an ios update via itunes whether this is the 5.0 software or 5,2,1.
Please note that Apple are very closed mouthed about new hardware releases and potentially a new iphone could be round the corner, however there is no evidence to suggerst this, i.e Apple have not even mentioned an iphone 5 this year anything you hear towards the contrary is media spin thus far and speculation.
ios 5 was built and tested to work seamlessly on iphone 4, the beta software released to developers is being tested on iphone 4. Please do not listen to people telling you that the iphone 4 will not run this ios as well as a phone that does not exist yet. When iphone 5 launches it will most likely have dual processors and not until its launch will the next gen apps start appearing. -
I have the iphone 4s and just did the software 6.1.3 and now I can not zoom with the video, I have gon into settings and all but can not fix this did anyone else have this problem and how can I fix this? thanks
You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4) -
Hi I have an iPhone 4 & need to software update but don't have access to a computer & my phone dosent have it own system up date is there any other way of updating it
The first time to iOS 5 must be done with iTunes on computer.
-
System automatically restored manufacture settings
Hello, this morning when I turn on my computer it had automatically restored manufacture settings. As in, it was the same as when I connected it from the box. All my documents are gone!!!
Hello macks87,
After reviewing your post, I have located an article that can help in this situation. It contains helpful advice concerning Activation Lock which may be the reason you're having issues:
iCloud: Activation Lock
http://support.apple.com/kb/PH13695
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
is there any way to restore factory settings on an Iphone 5s that will not connect to Itunes because the phone is locked with a pass code. Problem is that the screen is completely shattered.
If the screen is completely shattered why bother to try and restore the phone?
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support -
My iphone hangs any time.I see a call coming but i cannot attend. My call drops anytime and i cant even end the call.The settings page doesnt respond many times.I have given the phone to Apple care , they update the software and return it back to me.IT WORKS FINE FOR 3-4 DAYS AGAIN THE SAME. Its under warranty and i am disappointed with the Apple product and service
If you used your backup to restore the data after it got returned, set it up as new device and don't use the backup data afterwards. It seems that some data inside the backup are corrupt. Follow this article and set up the account info and other setting manually after that:
Use iTunes to restore your iOS device to factory settings - Apple Support
Maybe you are looking for
-
Hi all Currently running CUC 10.x. User voicemail box was working fine. However, configured Unified Messaging and I can leave a voicemail for several users which illuminates the MWI on the phone and appears in email format. Problem is that I get prom
-
I'm in need of a rubberized case for a late 2007 macbook pro 15.4 silver keys help please
please help me out I'm in need of a rubberized case for a late 2007 macbook pro 15.4 (silver keys) cd in front. Please help me out. here is my personal email: *****@gmail.com I also have just purchased a 2006 macbook pro 17 inch and would like a ca
-
How to detect which data type is passed in ?
Hello! I've built a VI function. But I want to make it more secure - that function could detect which data type is wired to the inputs and allow wiring only certain data types. How can I do this? Thanks Message Edited by ACiDuser on 05-23-2009 08:1
-
Some problems about jtree, undo
I wrote a programme about do somethings to this jtree, like add a node, remove a subtree, but I wanna add a function of undo, but I don't know how. Like I operated this jtree, but I wanna undo, how? give some advice, thanks
-
Why are the lights blinking on my HP C6380 printer?
The lights are blinking and the printer won't print on my HP C6380 all in one printer.