I've RTFM, RTFFAQ, RTFCPU List, RTFStickies, but no answer anywhere :)

Going to start off by saying that my board did not come equipped with the RTFM Chip (I was bummed), and also the Sticky for "Checking the CPU Support List" is not correct for this 785GM-E65. Typing that in the search box and going to the page that comes up has.... wait for it... No CPU List! lol
SRSLY! SEE?!
BUT It is on the page if you go through the download's section->Manually Download->
No wai? YUS WAI!!
Now what I'm wondering about is the chip that apparently isn't available retail (either PIB or OEM[Tray]), but only through a pre-built rig, namely the Athlon II X2 250u 1.6ghz (AD250USCK23GQ)
I managed to get one of these off eBay for dirt cheap and since I'm building a rig for my neigbor, figured it'd be a great CPU since they are currently living out of their motorhome and the summers here get quite warm :P
Now the CPU Support list does show support for the "e" models, but they run stock speeds. These run much lower clocks and at a much lower voltage as well (.85-1.15v). There is also a 260u version which runs @ 1.8ghz, but it also is not listed.
Thanks!

Quote from: Henry on 31-March-10, 05:47:52
As a guess it should be supported but check with MSI to be sure and what BIOS version would be needed. It's probably to new to be on the list yet.
http://www.msi.com/index.php?func=html&name=aboutus
I doubt it's too new, as there are systems out with it, but again that is my concern since it was (apparently, as I didn't read it from an official source) a CPU not really available but to OEMs. I'm sure one could purchase one through say Dell's store as a replacement, but I think you'd be hard pressed to find any in E-tail stores like most tray packaged units. Since the thing runs the same low-end voltage (0.85v) as standard desktop processors do, I don't really think that will be of too much problem, but I don't know if the computer would run correctly if you don't have the microcode in the BIOS. I don't know if it is there JUST to display the correct CPU, or if it is used to actually run some of the CPU features, so if it is missing you may not have full usage of the processor. Make sense? haha
I have AMIBCP to edit the BIOS and insert CPU code (from what I can tell) if anyone knows the right value to input.

Similar Messages

How do I fix my ichat? My buddy list appears, but whenever I try to click on a buddy to chat, IChat won't let me. Nothing appears. When I try to click on "File" - "New Chat" Also nothing appears. What's wrong?

My buddy list appears, but whenever I try to click on a buddy to chat, IChat won't let me. Nothing appears. It won't let me chat regularly via text, or by video/audio chat. Even when I click on File -> New Chat, still nothing shows up! But, when I look at how many chats I have open, it says I have "X" amount of chats open! But nothing is there.........
If somebody tries to video chat me from my buddy list, I can see the request.... and then the video chat will work. But I cannot request anybody and if they send me a regular text ichat, ichat won't deliver it to me.
Somebody please help me I've tried so many things and nothing is working!!!!! :/

Hi,
This sounds like it is about Window positions.
iChat has Default places for Incoming Invites.
Video is always top Center of your Screen
Audio and Text chats are Upper right with the Audio slightly lower than Text Chats.
Secondary invites are sort of Stacked like when you open multiple files from the same App.
Your outgoing Windows are "Remembered" as to where the last one was when you used it.
This can be an issue if you use your Mac with a second display and turn Off Mirroring.
You windows can get "left" on the other screen.
Go to System Preferences > Displays and turn On Mirroring and the windows should come back to one Screen/display.
If this does not help go to your Home Folder/Library/Preferences and delete (Drag to Trash) com.apple.ichat.plist and restart iChat.
Unfortunately you will need to reset any iChat Preferences you have changed from defaults.
10:42 PM Tuesday; April 26, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.

UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
So I am just even more confused now.

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this?

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this? I have 4 blocks of Single Choice fields in order for the summary page to give me each day in the final report. But, I need the user to be able to make a selection of any day and time and that apointment to no longer be available to future users when they log in. Plus, when the user clicks on the time, they are unable to change their mind and choose another time. Here's the link if you want to see what I'm talking about: 2015-2016 Workload Apportionment Review

I'm afraid not. It's not rocket science but you need to do some coding.
You'll need to find a script (php) and save it to your local site folder. Then reference the script in your form's action attribute like so.
<form action="path/form-to-email-script.php" >
The input fields in your HTML form need to exactly match the script variables.
I'm assuming you're hosted on a Linux server which uses PHP code. Linux servers are also case sensitive, so upper case names are not the same as lower case names. It's usually best to use all lower case names in your form and script to avoid confusion.
Related Links:
Formm@ailer PHP from DB Masters
http://dbmasters.net/index.php?id=4
Tectite
http://www.tectite.com/formmailpage.php
If this is all a bit beyond your skill set, look at:
Wufoo.com (on-line form service)
http://wufoo.com/
Nancy O.

HT4644 I'm experiencing a similar problem with an LG Flatron monitor which my MBP no longer recognizes I've tried installing the updates listed above but have not been succesful. Everytime I get a message saying that this software is not supported on my

I'm experiencing a similar problem with an LG Flatron monitor which my MBP no longer recognizes. I've tried installing all the updates listed above but have not been succesful. Everytime I get a message saying that this software is not supported on my system. Can anyone tell me why I can't install the updates?

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

Show breadcrumb bar only on main list pages but not site pages

Is there any way to show the breadcrumb bar only on list pages (for example to navigate in document libraries, surveys, etc.) but no in site pages or wikipages. The only solution I found was adding a webpart to each page I want to
hide the breadcrumb bar but this is no long-term solution. How can I make sure that the breadcrumb bar only shows on ootb list pages but not on my site and wiki pages?

One way of hiding breadcrumb is through css. You can apply the css in custom master page that will hide the breadcrumb and in your default master page leave it as it is.
Using IE developer tool, check the class that is applied on the breadcrumb and apply as style of display none to that class. This way you can hide the breadcrumb. I don't have my dev box up so cannot tell the exact class right now but using IE developer
tool you will be able to find the same.
Geetanjali Arora | My blogs |

Disable delete option for a list? But where ?

hi all,
via Console Application I can hide/disbale the Delete This List option:
static void Main(string[] args)
SPSite site = new SPSite("http://localhost");
SPWeb web = site.OpenWeb();
SPList list = web.Lists["DemoList"];
list.AllowDeletion = false;
list.Update();
My question is, if I want do this in Empty SharePoint Project what I must to do ?
if any one has a suggestion or ides please tell me.
thanks in advance
Ahmad
SP 2013 & SPD 2013 & VS 2013 & MSSQL 2012

thanks for your answer Mr. Atkinson, that was excatly what I need. This is my code inside the event receiver:
public override void ListAdded(SPListEventProperties properties)
SPList list = properties.List;
list.AllowDeletion = false;
list.Update();
but the above code dont have any effect on the list, I have still the Item with DELETE THIS LIST in the listsettings.
do you know maybe why? or can I also debugg it?
thanks in advance
BR
Ahmad
SP 2013 & SPD 2013 & VS 2013 & MSSQL 2012

My macBook Pro I click a link on a site for a PDF file and all I get is blank? I have done the preferance settings listed here but still blank. Please help

When I open a PDF file from an internet site all I get is "Blank" . I have tried the preference settings listed here but it is still blank. Please help

Disable the Adobe Reader plugin in Firefox (Tools > Add-ons > Plugins) and use the external Adobe Reader application or Preview application instead.
PDF files may be found under entries like Portable document or Adobe PDF document or Adobe Acrobat Document.
*Firefox > Preferences > Applications > Adobe PDF document : Use Adobe Reader

I cannot find Acrobat 9 standard to download. I have the the serial number as listed at MyAdobe, but no link anywhere to the download.

I cannot find Acrobat 9 standard to download. I have the the serial number as listed at MyAdobe, but no link anywhere to the download.

David Franklin if the download was previously available under your account then please contact our support team directly at Contact Customer Care. If still available then the software can be re-enabled for download.
Once you have downloaded a copy of the installation files I would recommend making a back up in case you ever need the installation files in the future.
Finally if you can please turn off your e-mail signature when responding in the forums. These are public forums and both Ned and I have been editing your responses to remove your personal information. If you would prefer to not turn off your e-mail signature then please respond directly in your web browser by clicking on the link to View the full discussion.

While creating sales order I am getting Sanctioned party list blocked but I am able to create delivery, and PGI

Dear GTS Experts,
While creating sales order I am getting Sanctioned party list blocked, but I am able to create delivery, and PGI.
Where Is the wrong ?
Thanks a lot
Venu gopal

Dear Venu
Based on your message shown in the system, can you check the field in Control Settings for System Reaction in the Document type settings via Application Levels in the feeder system. This Field '' System Response in Feeder system if SAP GTS fails'' should be maintained with ''A''. I think in your case it could be 'Blank'' Thats why the system is allowing you to create the subsequent documents accordingly.
Please let me know if any further inputs required.

Have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lis

have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lists be printed

Hello, Edward and thank you for your note.
I read through the thread you mentioned and it seems that people are having a lot of problems with the iCloud clients, so we're not alone, but the unique issue in my case is the failing email address vs. the working perfectly email address.
After reading your message tonight, I tried my setup again with the preferred Apple ID (the one without the "." between the names), and for the first time ever, IT WORKS. Mail app configured the servers both send and receive as p01-smtp.mail.me.com and p01-imap.mail.me.com. For the first time, I'm able to send and receive into the Mail app, create mailboxes, move messages into and out of mailboxes, keep Sent messages, etc.
I had a 50-minute support chat with MobileMe support via ExpressLane on Monday afternoon. They couldn't resolve my issue but passed me on to escalation. I was told to expect to get an email from advanced support by this afternoon, but none has arrived. However, so far tonight -- and I will check again tomorrow several times before declaring victory -- it looks like something has been fixed on the Apple end to make things work.
I will report back after I do some additional testing tomorrow to make sure the fix is real and is solid...and before I let my friend, the new Mac user, know the good news.
Regards,
Mike

With newest update, Firefox 8 on Win7, opens Gmail to list view, but cannot open editor to read or write email.

Starting today, after the most recent update, Firefox 8 on Win 7, when I open GMail, I can see the list view, but when I try to open an email to read or reply, I get an error saying GMail cannot load the rich text editor, and I see only the snippet, without the actual content of the email.

Here's hoping that AdBlock can make an update that fixes this, because it's a royal pain having to switch back and forth. On my Mac, everything works fine.
But thanks.

TS1398 I have an original iPad 32 why can't I connect on my home wi-fi but can connect anywhere else. No problems at home connect with other iPads and MACs.

I have an original iPad 32 why can't I connect on my home wi-fi but can connect anywhere else? No problems at home connect with other iPads and MACs.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I know this question has been asked before a long time ago but NO Answer

Hello, This question has been asked before but no answer so I thought I'd ask it again since it's been a few years..
How can I replace the folder icons in a Picture Library with a thumbnail of a photo in a folder? I know I can do something very similar in the 'getting started' list by using a 'Promoted Links List' does the picture library
use the same type of methold? I'd like to see a thumbnail of one of the photos instead of a yellow file folder.
Thank you,
Joan

I'm a bit of fan of: lapointes add-ons.
If you have these installed (free of charge) it is just a powershell command. (set-spolist)
check: http://www.falchionconsulting.com/PowerShellViewer/Default.aspx?Version=SPO&Cmdlet=Set-SPOList
ImageUrl
False
String
Sets a value that specifies the URI for the icon of the List.
Good luck!

I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again.

I've RTFM, RTFFAQ, RTFCPU List, RTFStickies, but no answer anywhere :)

Similar Messages

Maybe you are looking for