I've run into a problem with my trail version of Adobe Premier 13, and it appears to be a major one.

I’ve run into a problem with my trail version of Adobe Premier 13, and it appears to be a major one. Here’s what happened. Yesterday when I turned on the computer, I got a prompt asking if I wanted to link my Adobe Lightroom with Adobe Premier. I “x’d” the prompt but then the computer went into a “do not turn off” mode. 45 minutes later the computer was still prompting me not to turn it off. Thinking that the computer was hung up I did turn it off. Then I turned it back on, went to Adobe Lightroom to discover that all my work from the past three-to four years had disappeared.
At this point I am afraid to mess with Adobe Premier, so it’s still on my computer. I used Windows 7, Photoshop CS3 and Lightroom 4. Do you think if I uninstalled my trial version of Adobe Premier 13, my work on Lightroom would return? Or is it lost?
Thanks to any who offer suggestions.
Bert Gildart

Bert Gildart
I was unaware that you could establish any direct linkage between Lightroom and Premiere Elements. Are you sure that the association was to be for Photoshop CS3 and Lightroom?
Have you tried to do a System Restore to a point before you installed Premiere Elements 13 or before you OK'd whatever this Lightroom linkage was?
Have you asked your question in the Adobe Lightroom Forum, asking about recovery of work lost from Lightroom? Have you found any traces of your lost Lightroom work in the Recycle Bin?
ATR

Similar Messages

Problem with software update version 6.0 Bundle 2333 and email.

I'm having a problem updating my blackberry bold 9650 with the new service update that came out a couple weeks ago. I left the US for Germany about 3 weeks ago and a couple days after arriving the software update popped up. For whatever the reason, I am unable to load the new update. Neither the 3G service nor connecting to wifi allows me to complete the update. It keeps telling me it can not connect. Now I'm having a problem with my email all of a sudden, as the email icon has disappeared. Whenever I try to reset up my email (which it tells me I need to do) it says I have to do the software update first. Which puts me in quite the dilemma. Apparently no update = no email, which I can not have. Unfortunately I forgot to bring my computer cord to sync my phone, and I really do not want to have to wait until August when I get back to the States to update my phone and have email again.
Any help would be greatly appreciated. Thank you.

My assumption is that since you're not on the Verizon network currently and you don't have access to the network, you can't OTA the update.
And since you don't have the USB data cable, you won't be able to connect your phone to your computer to update. My best suggestion... Get a data cable. There should be someplace nearby you in Germany where you can get an inexpensive data cable.
Then go about backing up your phone with the desktop manager and then update via the DM as well.
No, you can't be on TV.
Yes, this camera is heavy..
Go bother the reporter...I'm busy!!

Unique problem with installing new version of adobe flash player

Hi there. I am unable to install the newest version of adobe flash player. I am not getting any error messages like most people's issue on this forum. What happens is I run the installer, and it attempts to install for a second and then the installer screen goes blank , as you can see in the image. nothing happens after this. I have tried uninstalling and reinstalling. Any tips on why this is happening?

Hi Casey,
When did you download this file? It is for a problematic installer that we removed from our servers last week (Wednesday 25-March). If it's still being downloaded it's either cached on our servers and we need to clear the cache again, or it may be cached by your browser, in which case, clearing the browser cache will download a new, non-problematic installer.
Thank you in advance.
Maria

Installation problem with free trail version of Illustrator CS3.

I try to install the free trail version of Illustrator CS3.
I have this error message: A problem was encountered while tryng to load trial period for adobe Illustrator CS3.
I reinstall the software and have the same problem.
I uninstall the software and have the same problem.
can you help me ?

You probably need to contact Customer Support.

I'm running into a problem with my iTunes

I recently downloaded the new iTunes update, but my family decided to do a system restore to a day earlier. My iTunes wouldn'y open, so I tried to re-download it. It worked, but now my iTunes is blank and thinks it's on a different computer. So now when I try to sync my 2nd Gen. iPod Touch, it wants to erase all my CD ripped songs and delete my Apps.

Use the add to library function again, but just point the application to the iTunes library on the computer rather than the DVD backup.

Problem with the Enterprise version of Adobe Reader 10.1.3

I tried deploying the 10.1.3 in the way I successfully deployed 1.1 and 1.2, but kept getting errors about a transform on install. I tried installing the patched MSI without any transforms, but still got the error. Then I tried running the download straight from the enterprise distribution link, but that didn't work either, even on a computer without Adobe Reader installed.
I think there might be something wrong with the enterprise distribution.

Our Windwso 7 64 bit systems never had reader v8.
=== Verbose logging started: 4/12/2012 9:58:22 Build type: SHIP UNICODE 5.00.7600.00 Calling process: C:\Windows\System32\msiexec.exe ===
MSI (c) (8C:84) [09:58:22:702]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (8C:84) [09:58:22:702]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (8C:BC) [09:58:22:718]: Resetting cached policy values
MSI (c) (8C:BC) [09:58:22:718]: Machine policy value 'Debug' is 0
MSI (c) (8C:BC) [09:58:22:718]: ******* RunEngine:
           ******* Product: \\briggslaw\root\AppsDev\Drivers & Utilities\Adobe Reader\Reader 10.1.3\Acroread.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (8C:BC) [09:58:22:718]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (c) (8C:BC) [09:58:22:718]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (8C:BC) [09:58:23:950]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (8C:BC) [09:58:23:950]: SOFTWARE RESTRICTION POLICY: Verifying package --> '\\briggslaw\root\AppsDev\Drivers & Utilities\Adobe Reader\Reader 10.1.3\Acroread.msi' against software restriction policy
MSI (c) (8C:BC) [09:58:23:950]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (8C:BC) [09:58:23:950]: SOFTWARE RESTRICTION POLICY: \\briggslaw\root\AppsDev\Drivers & Utilities\Adobe Reader\Reader 10.1.3\Acroread.msi is not digitally signed
MSI (c) (8C:BC) [09:58:23:966]: SOFTWARE RESTRICTION POLICY: \\briggslaw\root\AppsDev\Drivers & Utilities\Adobe Reader\Reader 10.1.3\Acroread.msi is permitted to run at the 'unrestricted' authorization level.
MSI (c) (8C:BC) [09:58:24:012]: Cloaking enabled.
MSI (c) (8C:BC) [09:58:24:012]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (8C:BC) [09:58:24:012]: End dialog not enabled
MSI (c) (8C:BC) [09:58:24:012]: Original package ==> \\briggslaw\root\AppsDev\Drivers & Utilities\Adobe Reader\Reader 10.1.3\Acroread.msi
MSI (c) (8C:BC) [09:58:24:012]: Package we're running from ==> C:\Users\puaedw\AppData\Local\Temp\3dcd6c3.msi
MSI (c) (8C:BC) [09:58:24:028]: APPCOMPAT: Uninstall Flags override found.
MSI (c) (8C:BC) [09:58:24:028]: APPCOMPAT: Uninstall VersionNT override found.
MSI (c) (8C:BC) [09:58:24:028]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (c) (8C:BC) [09:58:24:028]: APPCOMPAT: looking for appcompat database entry with ProductCode '{AC76BA86-7AD7-FFFF-7B44-AA0000000001}'.
MSI (c) (8C:BC) [09:58:24:028]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (8C:BC) [09:58:24:028]: MSCOREE not loaded loading copy from system32
MSI (c) (8C:BC) [09:58:24:028]: Machine policy value 'DisablePatch' is 0
MSI (c) (8C:BC) [09:58:24:028]: Machine policy value 'AllowLockdownPatch' is 0
MSI (c) (8C:BC) [09:58:24:028]: Machine policy value 'DisableMsi' is 0
MSI (c) (8C:BC) [09:58:24:028]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (c) (8C:BC) [09:58:24:028]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (8C:BC) [09:58:24:028]: Product {AC76BA86-7AD7-FFFF-7B44-AA0000000001} is admin assigned: LocalSystem owns the publish key.
MSI (c) (8C:BC) [09:58:24:028]: Product {AC76BA86-7AD7-FFFF-7B44-AA0000000001} is managed.
MSI (c) (8C:BC) [09:58:24:028]: Running product '{AC76BA86-7AD7-FFFF-7B44-AA0000000001}' with elevated privileges: Product is assigned.
MSI (c) (8C:BC) [09:58:24:028]: Machine policy value 'DisableLUAPatching' is 0
MSI (c) (8C:BC) [09:58:24:028]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (c) (8C:BC) [09:58:24:028]: Enabling baseline caching for this transaction since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor update patch is active
MSI (c) (8C:BC) [09:58:24:028]: Looking for file transform: C:\Windows\Installer\{AC76BA86-7AD7-FFFF-7B44-AA0000000001}\Acroread.mst
MSI (c) (8C:BC) [09:58:24:028]: Original transform ==> C:\Windows\Installer\{AC76BA86-7AD7-FFFF-7B44-AA0000000001}\Acroread.mst
MSI (c) (8C:BC) [09:58:24:028]: Transform we're running from ==> C:\Windows\Installer\{AC76BA86-7AD7-FFFF-7B44-AA0000000001}\Acroread.mst
MSI (c) (8C:BC) [09:58:24:028]: SOFTWARE RESTRICTION POLICY: Verifying transform --> 'C:\Windows\Installer\{AC76BA86-7AD7-FFFF-7B44-AA0000000001}\Acroread.mst' against software restriction policy
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: SOFTWARE RESTRICTION POLICY: C:\Windows\Installer\{AC76BA86-7AD7-FFFF-7B44-AA0000000001}\Acroread.mst is not digitally signed
MSI (c) (8C:BC) [09:58:24:028]: SOFTWARE RESTRICTION POLICY: C:\Windows\Installer\{AC76BA86-7AD7-FFFF-7B44-AA0000000001}\Acroread.mst is permitted to run at the 'unrestricted' authorization level.
MSI (c) (8C:BC) [09:58:24:028]: Validating transform 'C:\Windows\Installer\{AC76BA86-7AD7-FFFF-7B44-AA0000000001}\Acroread.mst' with validation bits 0
MSI (c) (8C:BC) [09:58:24:028]: Transform 'C:\Windows\Installer\{AC76BA86-7AD7-FFFF-7B44-AA0000000001}\Acroread.mst' is valid.
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2205 2: 3: Patch
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2205 2: 3: PatchPackage
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: Media 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: File 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: TRANSFORM: 'PatchPackage' table is missing or empty. No pre-transform fixup necessary.
MSI (c) (8C:BC) [09:58:24:028]: TRANSFORM: Applying regular transform to database.
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ActionText 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: AdminExecuteSequence 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: Condition 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: AdminUISequence 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: AdvtExecuteSequence 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: AdvtUISequence 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: AppId 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: AppSearch 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: Feature 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: File 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: CheckBox 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: Icon 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ProgId 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ComboBox 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: CompLocator 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: Control 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: Dialog 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ControlCondition 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ControlEvent 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: CreateFolder 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: DrLocator 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ModuleDependency 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ModuleSignature 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: EventMapping 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: MIME 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: LaunchCondition 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ListBox 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ListView 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: Media 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ModuleComponents 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: MoveFile 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: MsiAssembly 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: MsiAssemblyName 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: MsiDigitalCertificate 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: RadioButton 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: RegLocator 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: RemoveFile 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: RemoveRegistry 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: SelfReg 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ServiceControl 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: TextStyle 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: TypeLib 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: UIText 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: Upgrade 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: UpgradeCode 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: Verb 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: MsiPatchCertificate 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: _MsiPatchTransformView 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: #_BaselineCost 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: #_BaselineFile 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: #_BaselineData 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: #_PatchCache 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ISComponentExtended 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ISCustomActionReference 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ISSetupFile 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: LockRegPermissions 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: LockFilePermissions 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: MsiSFCBypass 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: SxsMsmGenComponents 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ISDistribution 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: AppsInUse 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: BackupAndRestoreRegistry 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: DefragFiles 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: DeleteComponents 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: DeleteFiles 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: DeleteProducts 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: DeleteRegistry 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: ServiceInstall 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: TransferRegistry 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 2262 2: AppsInUseEx 3: -2147287038
MSI (c) (8C:BC) [09:58:24:028]: APPCOMPAT: looking for appcompat database entry with ProductCode '{AC76BA86-7AD7-FFFF-7B44-AA0000000001}'.
MSI (c) (8C:BC) [09:58:24:028]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (8C:BC) [09:58:24:028]: Transforms are not secure.
MSI (c) (8C:BC) [09:58:24:028]: Transforming table Property.
MSI (c) (8C:BC) [09:58:24:028]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\puaedw\AppData\Local\Temp\MSIcd6c2.LOG'.
MSI (c) (8C:BC) [09:58:24:028]: Command Line: CURRENTDIRECTORY=\\briggslaw\root\AppsDev\Drivers & Utilities\Adobe Reader\Reader 10.1.3 CLIENTUILEVEL=0 CLIENTPROCESSID=1420
MSI (c) (8C:BC) [09:58:24:028]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{F29D7469-E8E4-48F5-BF96-34E18D928DFD}'.
MSI (c) (8C:BC) [09:58:24:028]: PROPERTY CHANGE: Adding TRANSFORMS property. Its value is 'C:\Windows\Installer\{AC76BA86-7AD7-FFFF-7B44-AA0000000001}\Acroread.mst'.
MSI (c) (8C:BC) [09:58:24:028]: Product Code passed to Engine.Initialize:           ''
MSI (c) (8C:BC) [09:58:24:028]: Product Code from property table before transforms: '{AC76BA86-7AD7-FFFF-7B44-AA0000000001}'
MSI (c) (8C:BC) [09:58:24:028]: Product Code from property table after transforms: '{AC76BA86-7AD7-FFFF-7B44-AA0000000001}'
MSI (c) (8C:BC) [09:58:24:028]: Product registered: entering maintenance mode
MSI (c) (8C:BC) [09:58:24:028]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
MSI (c) (8C:BC) [09:58:24:028]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
MSI (c) (8C:BC) [09:58:24:028]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
MSI (c) (8C:BC) [09:58:24:028]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (c) (8C:BC) [09:58:24:028]: Specifed source is not already in a list.
MSI (c) (8C:BC) [09:58:24:028]: User policy value 'SearchOrder' is 'nmu'
MSI (c) (8C:BC) [09:58:24:028]: Machine policy value 'DisableBrowse' is 0
MSI (c) (8C:BC) [09:58:24:028]: Machine policy value 'AllowLockdownBrowse' is 0
MSI (c) (8C:BC) [09:58:24:028]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (c) (8C:BC) [09:58:24:028]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (8C:BC) [09:58:24:028]: Product {AC76BA86-7AD7-FFFF-7B44-AA0000000001} is admin assigned: LocalSystem owns the publish key.
MSI (c) (8C:BC) [09:58:24:028]: Product {AC76BA86-7AD7-FFFF-7B44-AA0000000001} is managed.
MSI (c) (8C:BC) [09:58:24:028]: Running product '{AC76BA86-7AD7-FFFF-7B44-AA0000000001}' with elevated privileges: Product is assigned.
MSI (c) (8C:BC) [09:58:24:028]: Adding new sources is not allowed.
MSI (c) (8C:BC) [09:58:24:028]: Warning: rejected attempt to add new source '\\briggslaw\root\AppsDev\Drivers & Utilities\Adobe Reader\Reader 10.1.3\' (product: {AC76BA86-7AD7-FFFF-7B44-AA0000000001})
MSI (c) (8C:BC) [09:58:24:028]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel.
{AC76BA86-7AD7-FFFF-7B44-AA0000000001}
MSI (c) (8C:BC) [09:58:24:028]: Note: 1: 1729
MSI (c) (8C:BC) [09:58:24:028]: Product: Adobe Reader X (10.1.3) MUI -- Configuration failed.
MSI (c) (8C:BC) [09:58:24:044]: Windows Installer reconfigured the product. Product Name: Adobe Reader X (10.1.3) MUI. Product Version: 10.1.3. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Reconfiguration success or error status: 1638.
MSI (c) (8C:BC) [09:58:24:044]: MainEngineThread is returning 1638
=== Verbose logging stopped: 4/12/2012 9:58:24 ===

Problems with an older version of Adobe Digital Editions.

When I try to download a book from Kobo, I get this error message: Error geting licence. Licence server getting communication problem. E_LIC_ALREADY _FULFILLED_BY_ANOTHER_USER.
Does anybody know how to fix this or is there a solution.

[topic moved to ADE forum]

Problems with your serial number produk: Adobe Premier Pro CS6.

Dear,
Please, send the serial number for my success download (type of product, Adobe Premier Pro CS6)
Regards,
Fathonie AG

Hi Fathonie AG,
Please refer : http://helpx.adobe.com/x-productkb/global/find-serial-number.html for help in finding the serial number for your product.

Integration of LR CC with other earlier versions of Adobe products (LR and PS)

i just purchased and finally downloaded Lightroom in the cloud. i also have Creative Suite 3. do they integrate with each other? or do i need to go all out in the cloud, which is more expensive. thanks.

HI,
While I appreciate your taking time to answer I have followed those steps already and they don't solve my problem.
Again:
I am a fulll CC member.
I installed LR CC
Decided I would rather not risk losing some LR functions if Adobe's servers have a problem
Uninstalled LR CC from the CC uninstall, not Windows' uninstall.
Paid for a LR 6 license, downloaded from the DL page that shows LR6 and installed it.
It shows LR CC on the splash screen and has the LR mobile drop list in the upper L corner.
I even tried uninstalling and reinstalling as a trial but the install program tells me I have a license and installs LR cc.

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solveby myself? (Mountain Lion, Mavericks, Yosemite?)

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)

It will make it easier to help you w/ your problem to know the size and RAM installed.
"Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
I'd say Lion if your Garmin is compatible.
Both Lion and Mountain Lion are downloadable from the Apple Store:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
The OSs will get more resource hungry the higher you go.

When I plug my iPhone 4s into my PC, I get an error message that says iTunes needs a newer version of Apple Mobile Device Support. It wants me to uninstall both the AMDS and iTunes and then reinstall iTunes. Has anyone else run into this problem recently?

When I plug my iPhone 4s into my PC, I get a message that says iTunes needs a newer version of Apple Mobile Device Support. It wants me to uninstall both the AMDS and iTunes and then reinstall iTunes. iTunes won't recognize my phone and so I can't synch it. Has anyone else run into this problem recently and how did you resolve it? Thanks!

Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem b

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS. I would like to know how to overcome this problem?

Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

Encoder keeps running into a problem and closes adobe premiere pro down too.

Hello, i have be trying to open my Encoder but for some reason it keeps running into a problem and closing on me and has a time or two closed down my adobe premiere pro down too. What is happening?

Hi. I have the same problem using an HTC Incredible Android smartphone. The video/audio not in sync. Slight advance or delay. Not matching. I have the phone set to record as mp4, but when I use the file it says 3gp, so I transcode it to mp4. I have filmed a lot with my smartphone and now I have all this footage for over 6 months that may have this problem so I seriously need to know how to fix this or I have a ton of bad footage showing me in frame talking and it's not going to be right for YouTube videos of selfie-vlogging. So, I need to know the best, most fool-proof, most efficient, time-saving way to process and make it workable without taking too much time. Please share the very best methods which work 100% of the time. Thanks, JR
Message was edited by: XXJR2013XX

Sun's JDBC Tutorial. Run Into a Problem

im working through suns JDBC tutorial but ive run into a problem. when i try to run the application i get a whole lot of exceptions. heres my class for working through with the tutorial:
package JavaPhonebook;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
public class JDBCTutorial{
    public static void main(String[] args){
        Connection con;
        Statement stmt;
        ResultSet srs;
        try{
            Class.forName("org.apache.derby.jdbc.EmbeddedDriver");
            con = DriverManager.getConnection("jdbc.derby.COFFEES");
            stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
            srs = stmt.executeQuery("SELECT COF_NAME, PRICE FROM COFFEES");
            while(srs.next()){
                String name = srs.getString("COF_NAME");
                float price = srs.getFloat("PRICE");
                System.out.println(name + " " + price);
        }catch(ClassNotFoundException ex){
            ex.printStackTrace();
        }catch(SQLException ex){
            ex.printStackTrace();
}when i run it i get these exceptions:
java.lang.ClassNotFoundException: org.apache.derby.jdbc.EmbeddedDriver
        at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
        at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:169)
        at JavaPhonebook.JDBCTutorial.main(JDBCTutorial.java:30)Message was edited by:
Alex1989

Do you know what a classpath is?nope
Well this (classpath) is the crux of your problem.
How are you running this program? In netbeans.
well i registered java db by going to tools ->
options -> advanced options -> ide configuration ->
server and external tool settings -> java db database
and then choosing the java db location and database
location... this seems to be something netbeansy.
But this did not answer my question really.
All I can tell you is that you need to have all the directories and/or jarfiles your program needs to run in your runtime classpath. Runtime as opposed to compile time. I suspect that this "registration" process of which you speak is related to your compile-time classpath but either not your runtime classpath or you are not running in Netbeans.

I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunesI have a problem with the iTunes Store, I have a

I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunes U. In my screen I get only ipad2 Podcast, iTunes U Downloads. My problem is I can not access any application to download music, videos, books, etc..
ITunes will be installed wrong or what should I do to activate these options?

Go to the front page of the Store, and click Change Country. Make sure it is set to the country where you actually are.
Then you will be able to see everything that is for sale in your country, which, depending where you live, might or might not include music.

I've run into a problem with my trail version of Adobe Premier 13, and it appears to be a major one.

Similar Messages

Maybe you are looking for