I've sent my student ID but Premiere Elements 8 still isnt working

Hey,
Im in Australia and i bought Premiere Elements 8 (the education version). I read through the instructions of how to register which didnt help, then found out that i had to send a copy of my Student ID to use it. So i did that but i dont know if i did it wrong or if my student ID doesnt register with Adobe? I've registered it and sent the ID but no reply after a couple of weeks.

I've bought several Adobe products at Educational Pricing.
You can purchase them through a 3rd party (such as academicsuperstore.com) or directly from Adobe. Whoever you purchase from is responsible for confirming your eligibility.
In any event, I'm fairly sure there is not a separate "educational version" of the software. Once your educational eligibility is confirmed, you are sent the same commercial product as everybody else. IOW, there's no "educational version" of their software, only "educational pricing".
I've never heard of buying the educational product, then having to send your ID in. It should work the other way around. Neither Adobe nor an authorized  reseller will send you the software without first verifying your eligibility.
Unless things work differently Down Under....?

Similar Messages

  • So my phone got wet the other day. I dried it out completely, but the touch screen still isnt working. Is there anything I can do short of getting a new phone? Anything that can be done at the nearest Verizon store? I am one of three phones on our plan an

    So my phone got wet the other day. I dried it out completely, but the touch screen still isn't working. Is there anything I can do short of getting a new phone? Anything that can be done at the nearest Verizon store? I am one of three phones on our plan and I am trying not to need to get a new phone before our contract expires next month.

    Hello wetphone!
    We're sorry to hear that your phone isn't working. It's very important to have a functioning touchscreen!  Let's explore your options OK? If the phone is taken to a store, troubleshooting can indeed be done. The store representative can even contact us while you're there.  Do you have insurance on the device? Or, do you maybe have a prior vzw device that can be activated until the upgrade is available? You can also check your My Verizon account to see if your line( or another line on the account) is eligible for an upgrade. VZW always has options for you.
    Thank You,
    ChristinaB_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • I started a creative cloud student membership but Premiere Pro and After Effects are not in the app

    I started a creative cloud student membership but Premiere Pro and After Effects are not in the app and won't download from the adobe website, all that happens is that the creative cloud app opens and sends me to the list of programs available for download which still do not contain Premiere Pro and After Effects

    Premiere Pro and After Effects are 64 bit only apps.
    They require a 64 bit computer and a 64 bit operating system.
    If you're running Windows 7 32 bit or Windows 8 32 bit then you will not be able to download, install or run Premiere Pro or After Effects.
    See http://www.adobe.com/products/creativecloud/faq.html#desktop-products
    Which desktop applications in Creative Cloud require 64-bit operating systems?
    With the new CC apps, most of the pro video and audio applications now require 64-bit operating systems to run. These native 64-bit applications include Adobe Premiere® Pro CC, Adobe Audition® CC, After Effects® CC, Prelude® CC, and SpeedGrade® CC. Flash Professional CC, Photoshop CC and Lightroom® also require 64-bit on Mac OS.

  • Student Version of Premiere Elements/Photoshop Elements

    Can I load the student version of Premiere Elements/Photoshop Elements onto multiple computers?

    erikc23185610 wrote:
    Can I load the student version of Premiere Elements/Photoshop Elements onto multiple computers?
    I should think so because Adobe's generic license allows installation on two devices but you need to read the EULA (End User License Agreement for specifics).  Why not just install it and see what happens.
    Adobe hasn't out its EULAs online like Microsoft so I can't check it.
    This generic doesn't say anything.

  • Have a brand new dell. Not much on it but Premiere elements 13. Haven't used it for anything else - only 5 days old. I am in Premiere, add vid, render then poof. it says add media where those rendered files were. any help would be appreciated. thank you

    Have a brand new dell. Not much on it but Premiere elements 13. Haven't used it for anything else - only 5 days old. I am in Premiere, add vid, render then poof. it says add media where those rendered files were. any help would be appreciated. thank you

    bgar
    On what computer operating system is your Premiere Elements 13 running on?
    What are you (manually) or the project (automatically) setting as the project preset?
    (See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size,
    and Pixel Aspect Ratio (even if fields look grayed out).
    What are the properties of these source media, including file extension? The brand/model/settings of the camera that recorded the
    video may give us this information.
    When the source media hit the Timeline for the first time, is there an orange line over their content? Or is there
    no colored line and an orange line appears over them only after you have edited them?
    Please elaborate on "poof" after rendering the Timeline content by pressing the Render button above the Timeline content with the orange line over it.
    a. Media Offline displays?
    b. Other?
    ATR

  • My computer has 16GB of memory, but premiere elements only reports 4GB.  Why?

    My computer has 16GB of memory, but premiere elements only reports 4GB.  Why?

    olsenj46
    You have not given us enough information to help you.
    What version of Premiere Elements are you using and on what computer operating system is it running?
    For Premiere Elements to take full advantage of your computer resources it needs to be a version that runs as a 64 bit application in a 64 bit system. If you have Premiere Elements 10, 11, or 12 on Windows 7, 8, or 8.1 64 bit that will be the case. If you have Premiere Elements 11 or 12 on Mac 64 bit, that will be the case.
    All others, Premiere Elements will be a 32 bit application running as 32 bit in a 32 bit computer operating system OR a 32 bit application running in the 32 bit compatibility mode of a 64 bit system. Key thought here is that, 32 bit system has maximum supported installed RAM = 4 GB and 3 GB or less of that are available.
    Please fill in the necessary details so that we can go from generalizations to what you actually have.
    Looking forward to your follow up.
    Thanks.
    ATR

  • My serial number for adobe photoshop elements 12 and premiere elements 12 does not work

    My serial number for adobe photoshop elements 12 and premiere elements 12 does not work.  On adobe.com it shows that the serial number I received is associated with adobe photoshop elements 9 and premiere elements 9.  I have purchased those products in the past, but just recently upgraded to elements 12.  I can use the the photoshop organizer, but can't open the photoshop editor.

    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here is a link to a page with options to help make contact:
    http://www.adobe.com/support/download-install/supportinfo/

  • "Adobe Premiere Elements 13 has stopped working"

    I got a copy of Premiere Elements 13 on "Black Friday" (one month ago).  I am using stabilization and sometimes get "Adobe Premiere Elements 13 has stopped working".  I have been guessing at the problem and run several experiments - one being; stabilize a clip in it's own project and create an MP4 to use in the final project.  The latest clip seems to render fine, but crashes on playback (sometimes this happened on version 12 but not so consistently and often.  I'm running 64 bit Windows 7 Home Premium, with 6GB RAM, 3.30GHz, Intel Core i3 - 4 core processor.  I use two monitors with the built-in video hardware.  Rendering max's out all four cores while stabilization taxes the RAM.  Where can I look to find out more details about this problem (only guessing with anything less)?  Thanks for the help.

    Ray
    Thanks for the reply with further details and results.
    The generalization is that you (manually) or the project (automatically) sets the project preset to match the properties of the source media.
    But, if you have more than one format to import, you can still import that "atypical" format into the project (a project cannot have more than one project preset). But, the Shake Stabilizer will not stabilize it since it's properties do not match the description of the project preset. You can easily understand this by looking at the description of the project preset that has been set for the project and comparing it with specification of your video source. But, I have not yet found that such a situation creates a project/program "stopped working" as in shutting down the project/program.
    I suspect a major factor when you run into a Shake Stabilized induced project/program shutdown is computer resource demands of the feature for the video which is requiring the stabilization. And, I have found that the stabilization times can be long.
    Consequently, if the Shake Stabilizer does not cause the project/program to shutdown when asked to stabilize a video clip (without other effects). I am very guarded in the outcome, especially stabilization times, when the Shake Stabilizer is asked to stabilize a video clip to which other effects have already been applied.
    We will looking forward to your results.
    Thank you.
    ATR

  • Adobe premiere elements 13 has stopped working message

    Every time I open adobe premiere elements 13 and download any form of media, in about every 2-3 minutes when i'm editing my video, A message will come up stating that "Adobe Premiere Elements 13 has stopped working." It forces me to close the application. I went to a computer expert and he said that my computer meets all the requirements of the software and even exceeds some of them since it's only 2 years old. Why does this keep on happening to me and how do I fix it?

    senseimike
    Premiere Elements 13 on what computer operating system?
    Have you updated 13 to 13.1 using an opened project's Help Menu/Update? If not, please do so.
    Now the usual drill questions...
    1. Do the problems exist with and without the antivirus and firewall(s) disabled?
    2. Are you running the program as Administrator?
    3. Are you using a pen and tablet device instead of a mouse?
    4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card. According
    to the Device Manager/Display Adapters, how many video cards/graphics cards is your computer using? Are you running
    a multi- monitor system?
    5. Is the latest version of QuickTime installed on your computer along with Premiere Elements 13/13.1?
    6. What are the properties of your source media including file extension and duration? Knowing brand/model/settings of the camera that
    recorded the videos is probably the quickest way to get at that needed information. What project preset are you (manually) or the project
    (automatically) setting?
    7. What specific edits are you doing in the project when the program crashes/shuts down? Is there any consistency to the "stopped working"?
    You talk about every 2 or 3 minutes in the workflow. But what is the size of the project by the time the problems set in....2 or 3 minutes
    from the time you started the project or 2 or 3 minutes after you have been working on the project for 10 to 90 minutes?
    Please review and consider the above, and then we will decide what next.
    Thank you.
    ATR

  • Premiere Elements 10 has stopped working

    Actually it has not worked yet.
    I just installed the Premiere Elements 10 -  again, followed all the details.
    My laptop is Acer Iconia 6102 dual screen touchbook
    Windows 7, Intel Core i5 CPU M480@ 2.67GHz, sys mem= 4gb
    Toshiba MK6465GSX disk drive, Intel HD Gaphics
    The computer is new.
    The dialogue says that Premiere Elements 10 has stopped working and will shut down.

    This machine has only the one drive listed, nothing hidden. 512 gb free, removed some unecessary files. I did manual updates for the hardware and all software, everything is up to date. Went through the preceeding steps. There was no need to scan suorce files, I have nothing uploaded. The program will not complete its startup. The splash page pops up,dialogue flashes all the drivers and files being loaded, then quits. Does not open. The Organizer opens, but I still cant get PE to open thru it either. My computer wont allow me to change resolution. Could the fact that this machine is touch screen, dual display have anything to do with it? Using up too much resources? The resuorce monitor is idle @ 0. My Windows Movie Maker works fine.

  • Redemption code for Adobe photoshop/premiere elements 11 does not work

    redemption code for Adobe photoshop/premiere elements 11 does not work

    I am having the same issue except that my premiere elements code worked great, but the photoshop elements key failed. Ugh.

  • Premiere elements 11- PitchShifter not working?

    Pitch shifter in Premiere elements 11 is not working as good as it was in Premiere elements 7. Here's some of my issues:
    When I change the pitch, the end of the audio is cut off/out of sync
    When a clip is short, the audio won't play if it has the pitch shifter effect
    When I split a clip with pitch shifter applied, the audio skips
    I would like it if the pitchshifter would be more like the one that was in premiere elements 7.

    Two questions... does your project match your video?
    Importing Video http://forums.adobe.com/thread/1065281
    -and project settings http://forums.adobe.com/thread/1112086
    And, just what are you editing?
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • Premiere Elements 4.0 stops working when adding a title

    Whenever I add a title, it quickly goes to "Adobe Premiere Elements.exe has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
    What to do? Thank you in advance for any input on the matter.

    Let me premise my responses by, Prem Elem had been working fine and this issue just started not too long ago
    Processor: 3500+ AMD Athlon 64 processor
    RAM: 1GB    Free? Not sure what you mean.
    Defrag space: just analyzed. All ok
    OS: Vista, not sure if fully updated...need to check
    QT: just updated
    Camcorder: Panasonic PV-GS80
    Proj Settings: Not sure what you mean, "New Project?"
    I'll make sure Vista is updated. Thinking about getting more RAM. It does say 1GB for on the "System Reqs" for Prem Elem
    Thanks

  • Adobe premiere element 12 doesn't work without administrator right

    adobe premiere element 12 doesn't work without administrator right.
    I have these 2 messages after i had selected a New project:
    Premiere elements debug event
    premiere elements has encountered an error
    [..\Src\Core\Preferences.cpp-347]
    Microsoft visual C++ Runtime library
    Runtime Error
    Programm:C:\Program Files\A..
    This application has requested the Runtime to terminate it in an unusual way

    then start as administrator.
    if you want to automate that: http://technet.microsoft.com/en-us/magazine/ff431742.aspx

  • I have upgraded to the latest firefox v7.0.1 for windows, when i click on its icon it doesnt open up? I uninstalled it and then reinstalled it but nothing happend it still doesnt work?

    I have upgraded to the latest firefox v7.0.1 for windows, when i click on its icon it doesnt open up? I uninstalled it and then reinstalled it but nothing happend it still doesnt work?

    Sorry you are having problems. First of all try Fifrefox's safemode.
    *[[Troubleshoot Firefox issues using Safe Mode]]
    If that works post back for further advice.
    Next step, if safe mode did not work.
    <u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
    See
    * this recent post [/questions/940399#answer-377134]
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    <u>Second: try a New Profile</u>
    *http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
    * this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
    **[[Back up and restore information in Firefox profiles]]
    * Until you are absolutely confident about the repercussions I suggest
    ** always use an empty folder when creating a new profile
    ** never delete or rename profiles, just disable or remove shortcuts
    ** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

Maybe you are looking for