I've three automatic indices in may file, but i'cant format two them. What can i do?
I can't format my automatic indices?
What can i do?
You aren't doing anything wrong.
If the PDF is short enough, your iPad Mail app will display the text as part of the mail.
Actually it is still an attachment.
Tap and HOLD on the text and you should see options to "Open In..." that will allow you to open the PDF in most PDF readers such as iBooks, GoodReader, etc.
Similar Messages
-
I forgot my password and could not open until it is said "connect to iTunes". I connected to iTunes. for three hours, I restored it. But it is still not restarted. what can I do? I can not use my iPad 3 for three days. Please help me!
Try and force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device. -
The Mac App Store shows an update available for iMovie but when I click "update" it gives me this message, "The product distribution file could not be verified. It may be damaged or was not signed." What can I do to update this program?
http://www.apple.com/support/mac/app-store/contact.html?form=account
-
Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.
Yes - well you have to make the file in a word processing Application.
You could use TextEdit (it's free) Pages (words only), or Numbers (data base) (they are part of iWorks - and may or may not be free (included) on your machine. You could use MS Office (it is not free) You could use any Open source word processor that plays well with Office (NeoOffice, StarOffice) they are free.
That's how you create content and copy/paste URLS. Then you save the file to the desktop. If you are going to make more than one file... you make a folder on the desktop and save, or drag the file(s) into it.
You attach it to your e-mail client which will compress it and e-mail it. An excellent reference is to use Help, from the menu bar, also from inside any application. From your library or book store the OS X for Dummies has a lot of useful information (you don't read it cover to cover but look up chapters about what you'd like to do)
You can also make appointments at your local Apple store for individualized help (if a store is nearby) -
I have an old version Adobe Creative Suite 3 Design Premium. I uninstalled it from my old computer and was trying to install it on my new computer. It copied all the files but I cant open them and it doesn't ask me for my registration info, which I have. What shall I do to get Adobe up and running?
when you were install your cs3 you should have been prompted for you serial number. were you?
if not, you probably didn't properly install cs3. copying/migrating/moving etc is problematic.
if yes, did you see any error messages during installation?
if yes, attach a screenshot of the error message.
if not, check you install logs, Troubleshoot with install logs | CS5, CS5.5, CS6, CC -
Spotlight and search field in Outlook on MacBoon cannot find files as of a certain date. What can be the problem and how to solve?
Reinstall on both.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless.
Restore your iPhone to reinstall iOS. Be sure to do this while connected to your computer and iTunes.
Tap Settings > General > Reset > Erase all content and settings. -
After upgrading to Mountain Lion, I repeatedly get this message: "There was a problem connecting to the server. URLs with the type "file:" are not supported.
Why?
What can be done to eliminate it?Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.
-
How do I save all mp3 files as an attachable audio file in text messaging on a G'z One Commando? Some mp3 save as these types of files but I don't how or what I do differently.
In summary, it sounds to me as though the Mac concept of "hidden extension per file" isn't embraced at all by Photoshop.
So assuming the extension is always visible, what is the easiest way do each of the following (ignoring issues with integration with other apps):
1. Save a JPEG as: abc.jpg
2. Save a JPEG as: abc
3. Save a JPEG as: abc.
4. Save a JPEG as: abc.xxx
Since it seems to me we still haven't nailed down whether there's a disparity between how this works on Photoshop for Mac vs. PC, I'll answer the above questions for PC:
1. File - Save As, choose Format: JPEG, type (replace filename with): abc
2. No difference than 3 on a PC.
3. File - Save As, choose Format: JPEG, type: abc.
4. File - Save As, choose Format: JPEG, type: abc.xxx
How is it different from the above on a Mac?
Is there something more complex, such as the sequence of operations, or another system setting, that I didn't cover here? I normally always keep Explorer set so that file extensions are visible (it's global on a PC).
-Noel -
I am using OS X Mountain Lion and I have this .avi file but not able to read. What is missing in my setup and what other file do I need to download to enable me to read? I can read mp4 files though.
Here is a link: https://itunes.apple.com/en/app/mplayerx/id421131143?mt=12
I agree that VLC is also a good choice but MPlayerX is more user friendly. -
I cannot install the trial for Acrobat XI Pro. The file downloaded fine, but it does not open. What can I do?
For Windows:
http://trials2.adobe.com/AdobeProducts/APRO/11/win32/AcrobatPro_11_Web_WWMUI.exe
For MAC:
http://trials2.adobe.com/AdobeProducts/APRO/11/osx10/AcrobatPro_11_Web_WWMUI.dmg
ACROBAT XI -
I can't open dmg files on my new MB Air. What can I do?
I can't open dmg files on my new MB Air. What can I do?
How are you trying to open it? What happens when you double-click it in the Finder? In the Finder Preferences do you have Show these items on the desktop: "CDs, DVDs, and iPods" selected?
What happens? -
I just updatet my Iphone 4S to IOS6 and the where a error, and now itunes telling me I need to recover my Iphone to use my Iphone and to recover I will lose all my media files and other files! this is an disaster! What can I do?
EVEN MY IPHONE DON'T WORK ANYMORE !! NOO!!I exactly have the problem. Tried to get help from AT&T and Apple. Still no solution...
-
I recently got a charging case for my iPhone 5s, but it says it isn't certified and may not work reliably with my iPhone. What can I do to fix it?
Buy one that is certified. Your current case might work without problems, and then might stop working in the future. iOS 7 is especially "sensitive" to uncertified peripherals. With this iOS release they have started to clamp down on "pirate" peripherals.
-
2012/13 MacBook Pro froze up, so I did a hard shut down. Now, when I try to start up, it makes 3 unusual beeps, then I get a white screen. After a couple minutes, a flashing file folder with a question mark appears and remains. What is wrong and what can I do to fix it.
Three beeps usually means a RAM or RAM slots problem. The Question Mark means there is no bootable system found.
A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Trying to save file, but get one of two errors 50% of the time
Here's a breakdown of my issue.
I'm a 3d artist working on some texture files for my models. I'm constantly saving the file to make quick changes and fixes, doing so quite rapidly. So much so I now have actions recorded to cut down on having to go to the directory to save over the older file. Now for the issue. I'll try saving over the file, but then I'll either be giving an error message saying "Could not save a copy as ________ because the file name was not valid" or "Could not save a copy as _________ because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the Properties command in the Windows Explorer to unlock the file".
This is my personal pc so I do have the permissions enabled. If I open up the directory where the file is saved after I get these errors the file is then gone. These errors go away if I wait about 6 seconds in between getting the error to save then it has a better chance of working. That's not all of the time though. Sometimes I have to go in and just save manually, which is a real pain when I have actions recorded. It's almost like the relay between Photoshop and my directory isn't fast enough or something's just internally wrong. I've been dealing with this for a year. 11 months and 29 days too long. Help please!!!BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!
Maybe you are looking for
-
So I got the generic USB tip for the iGo charger. This is just a USB power port. I use a mini dock on my iPod to get line out while I'm in my car, and it has a USB in for charging. However, when I connect the USB it does not charge. Does anyone know
-
Why can't i access Pages on my mac osx Maverics version 10.9.5. Do i need to upgrade to Yosemite?
Why can't i access Pages on my mac osx Maverics version 10.9.5. Do i need to upgrade to Yosemite? I was using it yesterday just fine.
-
I am unable to download zip files
http://avl1.teltonika.lt/Downloads.FM22 I am unable to download zip files from this URL
-
JNI calls using dll build in DEBUG mode
I have deployed a filter which loads a dll in the init method. The dll is build in DEBUG mode. The doFilter() method is never called. But If I build the same dll with out DEBUG parameter the doFilter() method is called. what is the issue? I need to d
-
OSB channels, Service access on ports
Hi, I am looking to find how I can expose services (OSB proxy) on particular ports. I've created new HTTP port (9999) under Server/Protcol/Channels. I've created proxy service PS1. I want PS1 to be exposed only 9999. I can invoke PS1 on http://server