I've tried everything someone give me an answer that actually works

"usb device not recognized try reconnecting the device if windows still does not recognize it replace the device"
Ipods are not cheap and i've barely had this thing a few months its the brand new ipod touch gen4 and it worked just a few hours ago i've searched this forum as well as others and tried every suggestion imaginable ive reinstalled itunes ive tried every usb port ive reset my usb hubs ive stopped and restarted my apple service ive tried to put my ipod in recovery mode but without my computer recognizing it neither will itunes alot of help that was i've tried to connect it with the internet connection disabled. Any other suggestions? Preferably one that will work please!

i had tried everything too. the only thing that would work for me was disabling my wireless on the pc.

Similar Messages

Apple has a problem and the cant solve it. I had some very important call but this new iphone just shut down on me and wont turn on i tried everything u can find in apple support nothing works for me. Anyone know what i can do?

Apple has a problem and the cant solve it. I had some very important call but this new iphone just shut down on me and wont turn on i tried everything u can find in apple support nothing works for me. Anyone know what i can do?

I would instead say you have a problem since nearly all IPs work as advertised. IF you do have a bad phone, take it into an Apple store and get a replacement. Hope you didn't jailbreak your phone though as Apple probably will tell you, you broke it, you fix it.

Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen. Full Wifi signal on both devices

Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen. Full Wifi signal on both devices so can't think what could be causing it to happen. Any suggestions please?

Sorry, I updated another thread I was a part of but didn't update my own thread.....ughhh!
I updated all of my ATV 2's and 3's to the latest firmware when it was released and have been problem free since. I do believe the major issue of not being able to connect after a period of inactivity has been corrected with the latest ATV firmware.
I can look at my network connection table using "netstat -an" in a CMD window and I do not see the massive number of connections I saw before the update.
Here is a link to the other thread I was referring to above:
https://discussions.apple.com/message/19952545#19952545
Have you applied the latest firmware updates to your ATV 3's?

My iphone 4 had went black and now it wont turn back on i was just texting a second ago now i tried holding down the power button and that didnt work i need help

my iphone 4 had went black and now it wont turn back on i was jsut texting on it a few mins. ago then when i went to check my texts it was black i tried holding the power button down but that didnt work can someone please help

Hi alicia243,
Thanks for visiting Apple Support Communities.
If your iPhone wont power on, I recommend going through these steps first:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

I had this video file and I was trying to flip it to a format that would work with iMovie. It used to have the Quicktime image with it. So, I assume it was a QT file. But, somehow I've changed the file from a video to a folder.

I had a video file and I was trying to flip it to a format that would work with iMovie. It used to have the Quicktime image with it. So, I assume it was a QT file. But, somehow I've changed the file from a video to a folder. I've tried to undo the action. No luck. I wasn't running my Time Machine. So, I can't go back. Help. It's the only copy of this video.

I've tried to undo the action.
How?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
it's the only copy of this video.
Where did you get the video from?
From the pic I noticed that the folder is 841.9mb. What's inside? Or what happens when you click on it?

Trying to install my business licensed CS4 that is working on current computer to new, but it's saying the license is not valid.

I am trying to install my business licensed CS4 that is working on current mac to new, but it's saying the license is not valid. I am now on creative cloud, but need CS4 because there's a plug in that only works with that. Please help. I do not want to deactivate the current running one as I need to make sure it works with the plug in on the new mac. Besides, aren't you allowed to install it on more than one machine, as long as only one is running?

Error "The serial number is not valid for this product" | Creative Suite

My iPod won't turn on and I tried everything someone help!!!

iPod 4g
It was reset because it wouldn't go on past the apple icon
My sister reset the iPod
I hav tried everything I can think of to turn it on
I've let it run dead for over a month
I charged it for over 10 hours yesterday to today
I hav hooked it to a computer
I even tried the button thing and
IT STILL WON'T TURN ON
SOMEONE HELP ME PLEASE!!!'

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My ipod is not working it shows ipod is disabled but i tried everything to recover it and its still not working what do i do now

i tried everything to disable my ipod but ti still shows ipod is disable

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Firefox is not able load any websites but others programs can. i tried everything given in the support forum but nothing worked out. so can you please help me out with it?

firefox is not able to load any websites... i tried everything given in the support forum under the topic firefox is not able to load any websites but other programs can.. but still i am facing the same problem. so please help me out with this issue!!

firefox is not able to load any websites... i tried everything given in the support forum under the topic firefox is not able to load any websites but other programs can.. but still i am facing the same problem. so please help me out with this issue!!

HT1212 After working perfectly for two years my iTouch has suddenly stopped connecting to my Hub. I have tried everything I can think of to get it working again but to no avail. My desktop computer still works through the same hub

After working perfectly for two years my iTouch has suddenly stopped connecting to my Hub although my desktop computer still connects. I have tried everything I can think of, including suggestions off Google/You Tube but nothing makes any difference. Any ideas. Surely it is not fit for the scrap heap after two years, but is clearly no use as it is.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT1430 I have an iPad and iPhone. I have had both devices set on the same Outgoing Mail Servers but the iPad has stopped sending emails. I have tried everything without success. The iPhone is still working properly.

I have an iPad and iPhone. Both devices have been set with the same outgoing mail server. All of a sudden the ipad stopped sending emails but the iPhone still sends emails. I have tried everything but the iPad will not send.

Try this out:
You delete your Mailaccount on your iPad and then add the same new...
At the most times it helps...

I've tried everything, but iTunes 7.0.2 won't Work

I've read a million of the "my iTunes 7.0 won't work" and tried a million different ways to get mine to work, but it just won't. Help please.
The program won't open.

replying to Lvass
The program won't open.
a few questions before proceeding.
are you getting an error message? if so, what does it say? include error message numbers if you're getting any.
or are you getting no error messages whatsoever when you try to launch itunes?
if you're getting no error messages whatsoever, do you just see the wee hourglass for a few seconds, and then nothing? if so, do you also have Norton Internet Security 2005 installed on that PC?
or are you seeing a brief "flash" of the itunes license screen (and then nothing)? if so, do you also see similar behavior when you try to launch your QuickTime?

Tried Everything, still cant get rollovers and actions to work

So ive gone thru page after page of this and that and nothing is working. I have a site file of my webpage (www.bluemoonbandblues.com/index4.html)
working in GoLive CS2. I am still in the learning stages, but think that this should have been fixed a long time ago.
I know its the Generated Items (CSScriptLib) but cant seem to figure out exactly how. I have made sure everything is linked to its appropriate file on the server. I have encoded into page and vice versa. I have flattened the CSScriptLib. and made sure that it (GenItems Folder) is on the server as well and in the same row as the index4 page. And Synched. Everything that I can rake up to try.
I know that Im missing something stupid. But I just cant seem to get it after looking through everyone else's similar problems.
By the way, the entire thing was working (online) at one point, until I was messing with the stinkin TimeLine Editor for 2 seconds, and then everything went haywire.
Thanks in advance. I really appreciate any feedback. Please don't yell.
Eric

Okay, so I even tried the Rebuild Script Library Option in the site setting area of my site window tool bar..but nothing. Soooo, I've started over from scratch and everything is going great,....thanks for asking....but now my problem is one ive had before with hidden layers that ive applied time editorness to, and that is that the image with an action to play scene is having that particular scene play in the upper left corner of its own layer box. aldfjlghdgh. So, i would move it in the editor and it would be okay. (that i know of) but this doesn't have a time editor "shadow layer" adfkjaljflaf. that makes no sense does it. forgive me. but anyhoo. this makeshift button doesn't wana show/hide the layer in the spot it's supposed to be in because it's unruly like my kids. It instead puts it into the top left corner of itself when activated. weird huh? haha. im sure this happens all the time to inexperienced fools like myself.

I have tried everything to get my new ipod nano to work with Windows 8. Do I need to install new drivers or what?

Got a ipod nano for Christmas. Installed already bought tunes on it with my computer at the time which was running Vista OS. Had to buy a new computer in March with Windows 8. Did not buy any songs until April 29th or so...but they will not show in my ipod nano. Talked with a tech and he got my songs into the new computer. However, after we hung up, I tried to download the 2 new songs into my ipod and it would not do it. I noticed that the "cloud" icon was not by any of the songs - only the word: downloaded. I am thinking that since this is a 64 bit computer that I need to do something else, but don't know what. Can you help me? Thank you
Judy1942

So you have tried a different USB sync cable and as well as plugging it into all the USB ports on your system? Did you try removing all other USB peripherals (excluding keyboard and mouse if necessary) to see if that did any good?
What happens if you connect it to another PC or Mac?
B-rock

Itunes simply wont open ive tried everything even spoken to experts but it wont work help please...

need massive help itunes hasnt opened for months now and need it to work but i CANNOT loose my music and pics etc so dont know what to do and i cant get ios5 without it ive done everything please help!!!

need massive help itunes hasnt opened for months now and need it to work but i CANNOT loose my music and pics etc so dont know what to do and i cant get ios5 without it ive done everything please help!!!

I've tried everything someone give me an answer that actually works

Similar Messages

Maybe you are looking for