I've tried putting libflashplayer in just about every directory and still FF won't see any plugins?

FF runs ok but does not find any plugins on a 64 bit Linux system. I put the libflashplayer.so in /lib64 as well as /usr/lib64 and /usr/firefox and /usr/firefox/components. FF version is 6.0.2.

If you have a 32 bit Firefox version then you need to place the plugins or symlink in a location for 32 plugins.<br />
Also make sure that you have 32 versions of all plugins.
Try /usr/lib/mozilla/plugins
* http://kb.mozillazine.org/Determining_plugin_directory_on_Linux

Similar Messages

  • I cannot read, use my iPad outdoors?  Cannot read books, surf the net; nothing.  Apple sold me a screen guard to helpmwith the glare, 've adjusted the settings to just about every combination but still nothing.  HELP!!

    I cannot read, use my iPad outdoors?  Cannot read books, surf the net; nothing.  Apple sold me a screen guard to help with the glare, I've adjusted the settings to just about every combination but still nothing.  HELP!!

    Turning the brightness up as much as possible will help a little. However, as Skydiver notes, screens like those used in tablets and cell phones don't work well in bright sun. That's why I have a Kindle for reading outside. Not to mention, I'd feel a lot less awful if I got sand in a $100 ereader than if I got it in my $700 iPad.

  • Can I move all my photo that I can see on iPhoto from my Mac hardrive and put them on an external hard drive and still be able to see them as thumbnails in iPhoto? Thanks! The reason, I need to know if I can do this is b/c I am running out of HD space!sp

    can I move all my photo that I can see on iPhoto from my Mac hardrive and put them on an external hard drive and still be able to see them as thumbnails in iPhoto? Thanks! The reason, I need to know if I can do this is b/c I am running out of HD space!sp

    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • I just updated my computer and now Safari won't play any video.

    I just recently updated my Safari, to have it up to date.  Now all of a sudden it will not play any video in Safari.  How can I get my videos to play again?  Please help!

    Hi..
    If you are referring to video streamed on YouTube or other sites that require the Flash plugin, try troubleshooting.
    Quit Safari.
    Open System Preferences > Flash Player then select the Storage tab. Click: Delete All
    Now uninstall the Flash plugin then reinstall new >  Troubleshoot Flash Player | Mac OS
    Very important to uninstall the currently installed Flash plugin first.
    Relaunch Safari.  From your Safari menu bar click Safari > Empty Cache
    Now try a video.
    BTW... if you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
    And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to:  Open in 32 bit mode  is selected, deselect, quit then relaunch Safari.
    Tip... when you post for help, please tell us which Mac OS X you have installed 
    edited by:  cs

  • I am trying to set up my college email on my phone, but it says it can't verify my account. I have tried just about every server name possible and I don't know what to do. Help?

    I am trying to set up my college email on my phone, but it says it can't verify my account. I have tried just about every server name possible and I don't know what to do. Help?

    Yes. Check your student manual or contact your help desk.

  • TS1368 I have tried uninstalling and re-installing and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.

    I have tried uninstalling and re-installing iTunes and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.

    When I click on the store it just never opens, I do not receive any message. I try to "refresh the page" and nothing. While having the store selected I go to "help" and check for updates and i get a message; "The iTunes updatte server could not be contacted" and it prompts me to check my internet connection which is fine. None of the items under the "Store" respond with anything.
    I ran a iTunes Diagnostics/ Under "Which Tests do you want to run" I check only "Network Connections" and the results that I receive is...
    Network connectivity:
         Network interfaces, verified
    iTunes Store connectivity:
         Internet connection, verified
         Secure link to iTunes Store, FAILED
    Does this help?

  • HT5312 I have forgotten the answers to my apple security questions. I have tried several times but just cant get through and I need to make a purchase for the first time

    I have forgotten the answers to my apple security questions. I have tried several times but just cant get through and I need to make a purchase for the first time

    I am having the same problem. I know my apple ID and password but do not remember my security questions. How do you go about changing the security questions? Please help.
    Thanks.

  • I just updated my pages and now it won't load. This is on my iPad. The first version which has the latest version it can have 5.1 or something like that. I am trying to open a document and am worried that if I uninstall and reinstall I will lose all my do

    I just updated my pages and now it won't load. This is on my iPad. The first version which has the latest version it can have 5.1 or something like that. I am trying to open a document and am worried that if I uninstall and reinstall I will lose all my documents

    I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

  • [Solved]Opera and just about every damn site

    It seems that just about every site that I visit with opera hangs, sometimes without loading anything, sometimes halfway, there really is no pattern, except that all pages hang opera and CPU usage goes to max, until you stop the page.
    I though this could be flash, but really this happens with pages that do not use flash at all. Any suggestions?
    Edit: Got it working, the trick was not to install opera.           
       ....but to install opera-qt4 or opera-dev, either works but opera + qt3 = gordon brown ugly
    Last edited by GalacticArachnid (2009-11-16 18:19:41)

    I have 32 bit version installed, and this problem does not exist in firefox. Also, as I recall I have uninstalled ipv6. Might need to chack that actually...
    Also, opera-dev and opera-qt4 seem to work just fine now xD Of course, as much opera-dev uses qt3, which refuses to look good on my system, no matter how much i try (can't seem to skin it, but thats another problem).
    Anyhow, Im going to check ipv6, and if its not that, then just go for opera-dev or qt4 folks. Opera cant play nice with shared library, or the rest of the world really.

  • I put my macbook into target disk mode and now it won't start up in regular mode

    I put my macbook into target disk mode and now it won't start up in OSX. I have used my install disk and repaired the drive. I have held down the option key to choose the system. I have tried to start in safe mode with same result. The apple screen appears, but the gear just keeps turning. I can get it back into target disk mode by connecting it by firewaire to my macbook pro. It will start up in Windows when I choose that system. What can I do to get it to start up with OSX?
    Thanks for your help.

    Try this from MacFixIt as well:
    In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
    * Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
    * Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • My computer won't let me run the setup.exe file. I am an admin I've run as admin and I've downloaded many times. I just reformatted my computer and now it won't work.

    My computer won't let me run the setup.exe file. I am an admin I've run as admin and I've downloaded many times. I just reformatted my computer and now it won't work.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
     Cheers, Tom

  • I just updated to 3.6.11 and now firefox won't load any web page

    I just updated to 3.6.11 and now firefox won't load any webpage it
    just times out I tried diableing add-ons no difference. I't on internet exploers now. Tried rebooting.

    Do you use McAfee Antivirus/Firewall/Security products? McAfee released a security update that is blocking Firefox 3.6.11. This should be cleared up with the next McAfee update.

  • Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

    Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

    You are referring to a feature called Clamshell Mode, please read Clamshell Mode setup for instructions.
    BTW when posting when you use generalities such as "have tried everything" this tells us nothing. When posting please be specific and try to paint a complete picture. It just makes things easier for those trying to help you.

  • Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!

    Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!
    Anyone can help me?
    Thank you, Claudio

    Hi Russ, Thank you for your reply!
    System Spec:
    2x2.26 Ghz QUAD-CORE
    12 GB RAM 1066 MHz DDR3
    I've stored the library in HARD DISK which is installed inside my computer (1 TB capacity) and different from my hard disk in which I've installed all my applications (600 GB capacity).
    I've installed FCP since 2001, bought FCP X in 2012: never had a problem. Yesterday I was editing my video of my last vacations (in California!) and I have updated FCP X, downloading FCP X 10.1.1: then the problem!
    Strange is the fact that I've just tried to export a short project, I can see the final product quite well.
    What is impossible is playing the clips within Final Cut: they are jumpimg, moving, presenting some frame in green or red ...
    Everything all right in iMovie.
    I've just checked the RAM: 9GB out of 12 GB is busy, could this be the problem?
    Motion is very slow: for 20 sec of project, it takes minutes to play. And once again, if you finalize the projet and export it in Quicktime, you can see it correctly.
    I do hope you may suggest something, I'm getting crazy!
    Thank you in adavance
    Claudio

Maybe you are looking for