I've updated my IPAD to IOS6 but itunes will not recognize it

I've also updated my itunes to 10.7
When i connect my ipad it seems to reconigze it as my iphone4 which is ridiculous.
I can't do anything with my ipad right now because it has 'plug it into itunes' sign but when i plug it in itunes won't recognize it at all.
The computer recogizes the ipad.
any suggestions on how to troubleshoot this?

Siri is not compatible with the iPad 2.

Similar Messages

I updated my iPad to iOS6 but Siri did not load, how can I fix this?

I updated my iPad to iOS6 but Siri did not load, how can I fix this?

Siri is not compatible with the iPad 2.

Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps.

Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?

So yu tried all of this:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If you had then time for an appointment at ther Genius Bar of an Apple store.

My ipod touch is now disabled after entering the wrong passcode too many times. How do I enable it again - it says "connect to itunes" but itunes will not recognize the ipod because it is disabled.

My ipod touch is now disabled after entering the wrong passcode too many times. t says "connect to itunes" but itunes will not recognize the ipod because it is disabled. How do I enable it again? Thanks!

iOS: Unable to update or restore

Updated to Windows 8.1 and ITunes will not recognize the nano 6th generatio IPod

Updated to Windows 8.1 and ITunes will not recognize the nano 6th geneartion IPod. I tried all the things that was listed on troubleshooting. Help

Did you ever get help for this? I use the radio feature often and now it will not play, since updating to Windows 8.1.

I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?

I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?

Well, there is always the possibility that it's been jailbroke, in which case, you're out of luck. However...
http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

My ipad is disabled and itunes will not recognize it

ipad is disabled and itunes tells me to enter password in ipad

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

I've done all I can but iTunes will not recognize my iPod under any circumstances no matter what troubleshooting I use.

I've gone through all the options, troubleshooting assistants, etc., however iTunes is still not recognizing my iPod. Is something wrong with my computer?

So you tried everything here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Have you tried another computer? This will help determine if yo have an Pod or computer problem.

HT2250 I have Bonjour files on my computer, but iTunes will not recognize it, how do I fix this?

I have Bonjour files on my computer, but when I open iTunes it says that I don't. Somehow the services are turned off, but I can't just turn on a file. How do I turn it back on?

Hello th3maj0r,
I was thinking that it might be a good idea to remove iTunes and all of its components including Bonjour and re installing them.
Depending on the version of your OS:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Regards,
Sterling

TS1702 I have an iPad 1. I went to do an update on GarageBand and iBooks but it will not update. How do I return it to the original version?

I have an iPad 1. I went to do an update on GarageBand and iBooks but it will not update. How do I return it to the original version?

Well, to paraphrase the old line, "What're you gonna believe, that email or your own lying eyes?"
The first thing I'd recommend trying is to power down your iPad (press & hold Sleep/Wake until the red OFF slider appears, then slide it to shut down), and then boot it back up and try again. You're resetting a bunch of state signals by doing that and this simple action (the first of a series recommended by Apple in your Users Guide) will quite often clear up these sorts of problems.

I've changed iPad carriers but iTunes will not update the carrier settings,

I've changed iPad carriers but iTunes will not update the carrier settings, stating that the requested resource could not be found. Does anyone know how I can download the ipcc file and force an update.

Your iPad may already have the latest carrier settings, especially if you have updated to iOS 4.3.3.

Forgot the passcode to my ipad. When I went to restore it, it asked me if I wanted to update the software so I said yes. It then went into recovery mode, I'm guessing, with the connect to iTunes showing on the screen. Now iTunes will not recognize it??

Forgot the passcode to my ipad. When I went to restore it, it asked me if I wanted to update the software so I said yes. It then went into recovery mode, I'm guessing, with the connect to iTunes showing on the screen. Now iTunes will not recognize it so I have no idea how to get it back! Help!!

Then you will need to try restoring it once more:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

I updated to OS X Yosemite but iPhoto will not download, is saying because it was bought by a different user or the item was refunded or cancelled. Now I cannot access ANY of my photos...

I updated to OS X Yosemite but iPhoto will not download, is saying because it was bought by a different user or the item was refunded or cancelled. Now I cannot access ANY of my photos...how can I fix this????

If you are logged in with the Apple ID that was used to purchase iPhoto or to set up the computer if it came preinstalled then quit iPhoto, backup your iPhoto library and drag the iphoto application to the trash (do not empty the trash yet) and then go to the App store and install iPhoto
If that does not resolve contact App store support - link is on the right of the App store window
LN

I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen . tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?

I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen . tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?

Dont know if accidently fixed it or not i got it to be recogniced by itune im restoring it now. i held the power/sleep button till turned off. then while holding the home button under the screen connected it to the usb wire .. also i change the usb port i was using on my computer dont know if it was luck or what but glad i got my phone back.
itunes recognized it as in recovery mode
http://support.apple.com/kb/HT1808
got it working currently restoring from backup good luck guys

I installed to Java 7 Update 13 64 bit today but firefox does not recognize

I installed to Java 7 Update 13 64 bit today but firefox does not recognize it. I have removed all older versions of Java from my Windows 7 64 bit Laptop.

Install the 32bit version. FF is a 32bit application even on a 64bit platform.

I've updated my IPAD to IOS6 but itunes will not recognize it

Similar Messages

Maybe you are looking for