I've updated to FF26 and get the follow error message "Secure Connection Failed" why is that?

ever since I've updated to FF26 some of the sites won't come up and show the following error message:
Secure Connection Failed
An error occurred during a connection to www.facebook.com. SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
it does not happens all the time but most of the times.
this also occurs on google.com, twitter.com and many more.
what to do?

Do you have the option to turn off the feature of Kaspersky scanning your SSL traffic? Usually that can be turned off (e.g., in ESET and BitDefender).

Similar Messages

Trying to install itunes on windows vista and get the following error message:

Trying to install itunes on windows vista and get the following error message: An error occurred during the installation of assembly "Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKey Token="1fc8b3b9a1e3b",process orArchitecture="x86"". Please refer to Help and Support for more information. HRESULT: 0x80070424.

A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time?

With my new macbook I attempted to open an older spreadsheet and get the following error message: "This spreadsheet cannot be opened because ti is too old. To open it, save it with numbers '09 first" So how does one do this when I only have ver3.1?

With my new macbook I attempted to open an older spreadsheet and get the following error message: "This spreadsheet cannot be opened because ti is too old. To open it, save it with numbers '09 first" So how does one do this when I only have ver3.1?

Numbers 3.x can only open Numbers '09 and later. You will need Numbers '09 to open Numbers '08 files.
If it is a single file (or only a few) you can email me and I will open and convert then email back. My email address is in the "Biography" of my profile.
You may have Numbers '09 installed. Look in the folder "/Applications/iWork '09" if Numbers is in that folder launch it, open the file you tried to open, and save. Then you should be able to open in Numbers 3.x

While partitioning in Lion 10.8, I get the following error message: I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message: DiskManagementTool has died

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

I have been attempting to partition a 2 GB hard drive that I just formatted using the Disk Utilty in Mountain Lion (10.8) and get the following error message:
DiskManagementTool has died. Disk Utility will need to be restarted. The log shows the following:
2012-09-10 11:20:51 -0700: Preparing to partition disk: “HitachiG ST Media”
2012-09-10 11:20:51 -0700:      Partition Scheme: GUID Partition Table
2012-09-10 11:20:51 -0700:      2 partitions will be created
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 1
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage”
2012-09-10 11:20:51 -0700:           Size          : 1.5 TB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:           Do not erase contents
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700:      Partition 2
2012-09-10 11:20:51 -0700:           Name          : “Alex's External Storage 2”
2012-09-10 11:20:51 -0700:           Size          : 500.05 GB
2012-09-10 11:20:51 -0700:           File system     : Mac OS Extended (Journaled)
2012-09-10 11:20:51 -0700:
2012-09-10 11:20:51 -0700: Beginning partition operations
2012-09-10 11:20:51 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:52 -0700: DiskManagementTool has died. Disk Utility will need to be restarted.
2012-09-10 11:20:55 -0700: Disk Utility started.
Does anyone have any thoughts? Cant find anything on the web with this

Recently installed dvd drive and get the following error message on startup, the system extension "/System/Library/Extensions/IOSCSiBlockCommandsDevice.kext" was installed improperly and cannot be used. Pointer is frozen in upper left hand corner.

I thought extensions were not used by Tiger? Tried disk utility, restart, any suggestions would be appreciated. Thanks!

frybicki wrote:
I thought extensions were not used by Tiger? Tried disk utility, restart, any suggestions would be appreciated. Thanks!
There are bunches of kexts loaded in Tiger; you can see them in System Profiler. The info from my TiBook shows the following:
That being said, you might want to do an NVRAM reset, since you have made a hardware change. Boot into open firmware by holding down the cmd-opt-O-F key combination until you get to the white OF terminal screen. Then type the following two commands:
reset-nvram <enter>
reset-all <enter>
which reboots the machine and forces it to rebuild its device table.
If that doesn't work, you may have a damaged kext cache file, which will require some single user skulduggery. This one is a little more complicated but may also clear up the problem as well. You can boot into single-user mode by holding down the cmd-S key combination as you boot until you get to a black Unix terminal screen. The routine goes like this:
/sbin/mount   -uw   /   <enter>
cd   /System/Library   <enter>
rm    Extensions.kextcache <enter>
rm   Extensions.mkext <enter>
touch   Extensions   <enter >
shutdown   -r   now <enter>
The last command does a graceful shutdown and then reboots the machine. This will force a rebuild of the extensions cache files which may clear up your problem.

Recently installed dvd drive and get the following error message on startup, the sysytem extension "/System/Library/Extensions/IOSCSiBlockCommandsDevice.kext" was installed improperly and cannot be used. Pointer is frozen in upper left hand corner.

Tried disk utility, restarts, any other suggestions would be appreciated. Thanks!

Try holding the Shift key down at bootup to see if it disables that kext or whatever the problem is.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Getting the following error message while login to OFA Analyst

Hi
I am getting the following error message while connecting to a OFA Analyst database and then I am not able to see any of the reports in OFA Analyst.
(MXXEQ35) RE.IWYD_Z70945 is not a valid RE.ENTRY
I think one of the report entry is corrupted in catalog but I am not sure how to restore/resolve it. Is there any way to resolve this problem ?
This is urgent Please let me know if any one have work around for this.
Thanks
Murugesan

See Note 230019.1 on Metalink for the solution to this problem.
Hope this helps,
Keith
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Beans http://www.oracle.com/technology/products/bib/index.html
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the inst

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.

Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.

I am running Windows 7 and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, 'Error occurred while installing the updates. If the problem persists, choose Tools Download Only and try instal

I am running Windows 7 home edition and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

TS1717 I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services. I do not know what to do.

I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services. I do not know what to do. I am the only user on my HP Pavillion laptop. Help!

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

My computer recently froze whilst updating Itunes, and has subsequently removed Itunes from my computer. When i have tried to reinstall the programme, i get the following error message "Invalid Drive:G:\" any ideas?

My computer recently froze whilst updating Itunes, and has subsequently removed Itunes from my computer. When i have tried to reinstall the programme, i get the following error message "Invalid Drive:G:\" any ideas?

Try the following user tip:
"Invalid drive X:\" install errors

Icloud is not backing up on my Ipad and Iphone. i also tried conneting to the computer to back it up and i get the following error message back up could not be completed beacause a session could not be started. also photo stream is not updating either.

icloud is not backing up on my Ipad and Iphone. i also tried conneting to the computer to back it up and i get the following error message back up could not be completed beacause a session could not be started. also photo stream is not updating either on both devices

Curretly, there is an iCloud blackout. It started this morning around 2AM California time (Pacific), 5AM New York (Eastern). A lot of people have been having issues all day, including me. No iCloud services are online. Even Find My iPhone is down.

I updated to Mavericks and now I can'burn any DVD's any more. I get the following error message and the disk is ejected: The disc can't be burned because an unexpected error occurred (error code 0x80020000)

I updated to Mavericks and now I can'burn any DVD's any more. I get the following error message and the disk is ejected: The disc can’t be burned because an unexpected error occurred (error code 0x80020000)
I did burn the same way in MAC OS X 10.6.8. with no troubles!
Can anyone please help me out?
I use for years DVD-R of TDK 4.7GB 16X.

Hey topo27,
I would try out the following and see if it helps:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Welcome to Apple Support Communities!
Cheers,
Delgadoh

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

I've updated to FF26 and get the follow error message "Secure Connection Failed" why is that?

Similar Messages

Maybe you are looking for