I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibited ted sign. Any suggestions pls.
I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
Similar Messages
-
Installed Yosemite...now my MacBook pro won't start up. Keep showing "Kernel Panic!" HELP!
installed Yosemite and now my MacBook pro won't start up. Keeps showing "kernel panic"
PLEASE HELP ME!If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
☞ If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report. -
I just downloaded the latest iOS.7 upgrade on my ipad2, and since I can not connect to the internet using my cellular data plan. I have checked my data plan and it's both current and over 2GB remaining. However the indicator shows no service, thus would be the best steps to recover. Thanks much for any support that can be provided.
Hello Kmart2@3
Check out the troubleshooting article below to get cellular to start working again.
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
Regards,
-Norm G. -
I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.
I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!
Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!
-
Time capsule has been working perfectly for months.
Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??What OS are you running??
It is very typical Yosemite issue.
1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
From my screenshot you can see the TC address is 192.168.2.57
It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
2. In Finder use Go, Connect to server.
Type in SMB://192.168.2.57 (replace with IP you discover).
If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented. -
TS3423 17" macbook pro won't start blue file with question mark is all that appears on the screen
My old macbook pro will not start up. Worked fine yesterday, today all I gat is the startup sound and a blank blue screen. After a while the screen shows a file folder icon with a question mark in it. Any ideas
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I'm unable to install updates my iPad.
What model iPad and what version of iOS is it currently running?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
HT4623 trying to update to 6.1.3 but keep getting message not connected to the internet when it is
I am trying to update my ipad to 6.1.3 and even though it is connected to the internet, i keep getting the message: unable to update not connected to the interent.
Any suggestions?Try using this extension to force compatibility.
* https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Check and tell if its working. -
When I boot the computer I get the flashing question mark. I have tried:
1.) Holding 'C' to access the 'Startup Utility' but the only thing that accesses is the Wireless Internet access.
2.) Holding [cntrl. option, power button] but that didn't access anything
3.) Holding [shift] to access safe mode, but that didn't access anything
It also suggested loading the 'startup disk' that came with the laptop, but I'm digging through the box and I don't seem to have one.
I don't seem to have access to removing the battery (I, at least, don't see the battery and would have to take the thing apart to access it)
The problem started with a stuttering/ skipping of the functions a couple of days ago- of which I started this thread: https://discussions.apple.com/message/17083016#17083016
That seemed to solve the issues until this morning when a video I was playing suddenly froze. I restarted the computer and the flashing question mark appeared.
Can anyone help with this please?A flashing question mark appears when you start your Mac
Holding 'C' to access the 'Startup Utility' but the only thing that accesses is the Wireless Internet access.
You hold the C key down when booting from your install disc. Hold down the Option key to prompt the Startup Manager window where you can select the startup disk. If the startup disk is not available from that window then it's likely failing or has failed.
Holding [cntrl. option, power button] but that didn't access anything
Just the Option key.
It also suggested loading the 'startup disk' that came with the laptop, but I'm digging through the box and I don't seem to have one.
It's an "install" disc, not startup disc and you need those discs to repair your Mac or take it to an Apple store or Apple certified repair shop, Since you don't have those discs and you can't boot in Safe Mode (Shift key) you have no way to verify the disk.
Replacement disc(s) from Apple: You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
And hopefully you removed all vestiges of MacKeeper. -
Macbook Pro won't start and I have to pay $100 to get it checked?
My Macbook Pro recently started to fail to start: When I press the power button, the hard disk makes its startup noise and the white light on the lid-opener button goes out a second afterward. I searched the web and found that it might be to do with a faulty Nvidia graphics chipset, and that apple will replace it up to 3 years after its purchased so I sent it to the apple service center here in Singapore. They asked me for $100 just to open it! Is that normal and should I get a replacement for free? Should I email apple?
Thanks!"They asked me for $100 just to open it! Is that normal and *should I get a replacement for free?"*
Replacement computer? Under *specific conditions* if your computer is still under its one year warranty and/or you have AppleCare.
As for charging you $100 just to open your computer up, you should NOT be charged if its confirmed that your computer has the faulty Nvidia graphics chipset. Make a copy of the KB Article: http://support.apple.com/kb/TS2377 *MacBook Pro: Distorted video or no video* issues and take it to the repair shop.
"Should I email apple?"
Nope! You will not get an answer. You can call Customer Relations in your country. Not sure of the procedure in Singapore. Call Apple tech support in your country. Ask politely & firmly to be transferred over to the Customer Relations department.
Good luck!
!http://i50.tinypic.com/izvwo1.gif! -
Enabled Apache and now my MacBook Pro won't start at all
Subject pretty much says it all. I was enabling Apache, php and installing ioncube. Restarted the computer, because I wanted to make sure Apache really was restarting... and now the computer will not come on at all.
I hear the CD start-up bit and then it clinks and is off. The power light illuminates briefly. Anyone ever hear of this or know *** I do now to get my machine back online?Does it start up in Target Disk Mode? Try holding T while booting up.
-
I was installing mountain lion and now my macbook pro won't start up
I was installing Mountain Lion and i restarted my computer and now it won't boot up.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I own a summer 2008 model Macbook Pro. Last year, my harddrive crashed but I had no way of fixing the macbook at the time. Fast forward to yesterday, I replaced the harddrive in my Macbook Pro with a harddrive that I took from a western digital 320gb external hard drive. Now the laptop isn't starting up. I press the power button, the DVD drive seems to spin up and then...nothing. No lights turn on, no other components make noise, the laptop simply stops booting. Now, I haven't fully charged the battery (only about 40% charged based on the 5 indicator lights on the batter itself), so I was wondering whether or not a fully charged battery would make a difference. Please let me know if you guys need clarification, I know I'm probably being very vague right now.
Thanks!I appreciate your help, but please don't just put me down like that
Most of the people that come on here, like yourself, don't actually give a resume of their level of experience. They are extremely vaigue, and based on the small paragraph of information it's up to us to try to gauge what level this person is at.
This is an extremely difficult and frustrating thing to have to do, because if we get it slightly wrong either way, and people instantly take offence & go on the defensive. Even though we are all perfect strangers until 3 or 4 sentences ago!
If you don't already have this page up - http://support.apple.com/kb/HT3910
Have you another Install DVD you can try?
Can you boot from any other bootable media, such as a USB Drive? (Holding Option). Or a linux / windows install DVD. -
Hi there, recently I've been trying to use my macbook as a router by turning on network sharing.
I'm sharing my connection through PPPoe.
It worked great for my 3DS and I was able to play online flawlessly
(unfortunately I don't have any other mobile device so I could only test this on my 3DS and ipod touch
But my ipod touch 4th gen, while it is able to connect to wifi with a strong bar, I cannot access the internet via web browsers and some of the apps.
It always gives me the 'cannot connect to internet' message.
What further puzzles me is that I can receive, update, and check my mail perfectly fine.
I've already tried the following:
1) unplugging and replugging my modem
2) forgetting the network on my ipod and re-access it
3) resetting network setting on ipod
4) tweaking with the internet sharing setting like trying different channels and different types of security
5) turning off and on my ipod, and turning off and on the wifi on my ipod
Anyway, I'm really stumped and I hope someone can help me figure this out.
Any help will be gladly appreciated.oh I'm not actually using a router, I'm using my macbook pro as a wifi router by turning on network sharing.
And I'm sharing the connection through PPPoe
...unless, of course, I'm totally misunderstanding your question @@;
I'm a complete tehcno noob =__=; -
Can connect to my house network, but can't connect to the Internet (other computers can)
Hello,
I'm experiencing a strange problem. Since I started my Mac Pro (cold start) some hours ago, I've lost the hability to connect to the Internet (Safari and Mail say I'm not connected). However, I can connect to 192.168.2.1 (my router) and see its webpage (it says it's connected to the Internet). If I use another computer on the same network, it can also connect to the Internet.
Weirder, if I go back to my Mac Pro with "no internet" and launch Parallels Desktop, then I can use WinXP to browse the Internet; I'm writing this post on my WinXP virtual machine.
This leads me to think there's a problem with how my Mac OS handles the networking. I have checked the Console, but the only related string I found is this:
16.04.13 22:03:25
kernel
SIOCPROTOATTACH_IN6: en2 error=17
As expected, Google doesn't reveal anything about that (and I'm connected with the first ethernet port). I've tried to restart my Mac, but the problem persists (exact same symptoms).
Could it be a DNS cache issue?
I don't see, other than a DNS problem, why I can't connect to the Internet with my Mac OS while I can on my virtual machines. If it was a driver problem, I wouldn't be able to connect to my router. If it's a DNS issue, where are the DNS caches located in order to clear them (I'd trash the folder)?
I could also reinstall the OS (waste of time, btw), but I'd really like to understand the problem, not just clear it and forget about it.
Or better than guesses, anyone already experienced this?
Any help welcome.If it's a DNS issue, where are the DNS caches located in order to clear them (I'd trash the folder)
No DNS caches, it looks up the alphabetic and then uses the numberic from then on.
http://17.149.160.49
is Apple, Inc main US web site. It that works, and the alphabetic does not, you have a DNS probelm.
Maybe you are looking for
-
Take a number from a given level in another list
Hi there. I'm quite confused about this topic, and I couldn't find anything basically because I don't know what to search for. I'm working on a "short" document with sections, subsections, subsubsections with relatively few text but lots of figures.
-
Problem in Data updation with multiple windows in JSF
Hi, I am facing a problem whitle working in JSF. As per my project scenario I have a list page which shows list of entities. I can click on the id of the entity and open a new window containing the details of that particular entity. In that perticula
-
Formatting dates according to language defined in "Regional format" (not "Country/Region") setting
Hi all, How do I format a date/time value according to the language defined in Settings > Region > Regional format on Windows Phone 8.1 (WinRT)?
-
Airport Utility doesn't find my Time Capsule.
I bought a 2TB Time Capsule to use as a wireless hard drive and as my time capsule. (Originally I was going to buy an airport and plug in a hard drive but the guys at the store said that TC would accomplish the same thing.) I have never been able t
-
Updated my ipad2 and all safari writing is in Chinese and can not get English version back
Has anyone worked out how to change back settings from Chinese to English on Safari after updating ipad?