I've upgraded the Discoverer from release 4 to 10.2.0.3

Hi guys,
I've upgraded the Discoverer from release 4 to 10.2.0.3 on two of my test systems.
the difference between the two test system is that one is SSL enable and the other one is not.
On the test system that is not SSL enabled users can access Discoverer via EBS fine but
on the tests system that has SSL enabled users cant so now they have to go directly to
the Discoverer link to access it. I've logged an SR with Oracle and they told me to edit the ssl.conf file
for the Discoverer side which I did and I placed the file directories and the locations of the certificates in that ssl.conf.
How can I get Discoverer to through EBS when SSL is enabled.
Thanks

Hi,
Firstly, you need to check that the ICX: Discoverer Launcher system profile has the correct https url to launch Discoverer.
Rod West

Similar Messages

Upgrading the database from Oracle 8.0.6 to Oracle 9.2.0

Dear SDN,
We are in the process of upgrading SAP 4.6b to 4.7 R/3 Enterprise.
Source Release:Windows 2000/Oracle 8.0.6/SAP 4.6b
Target Release:Windows 2000/Oracle 9.2.0/SAP R/3 4.7
Can anyone help us in explaining the procedure for upgrading the database from Oracle 8.0.6 to Oracle 9.2.0.
Thanks n Regards ,
Anantha Raman E.

Thanks Mr.Mohan
We tried to upgrade from 8.0.6 to 8.1.7 with the help of Inst Guides from service market place..the thing is we created another oracle home with new DBSID ither than the old DBSID...when we started the migration using 8.1.7 Data migration tool its not responding after the first phase CHECKING THE OLD DATABASE...
Pls help us in this regard
Whether we have to migrate or what...

Upgrade Oracle Database From Release 11.1.0.6.0 to Release 11.2.0.1.0

Dear Experts ,
I need the procedure to do the upgrade Oracle DB From Release 11.1.0.6.0 to Release 11.2.0.1.0
We have RAC Setup, OS windows 2003 R2 Server Service Pack 2
I have 3 instance Epprod, Epval, Mnlptprod
I am using the Same server as an application server as well.
Server Specification
E5540 @ 2.53GHz
2.53 HGz, 15.9 GB of RAM
Please your help highly appreciated

Hi,
Please refer the following links,which may help you in upgradation:
http://www.oracle.com/technetwork/database/upgrade/best-practices-for-upgrading-11gr2-174946.pdf
http://docs.oracle.com/cd/E14072_01/server.112/e10819/intro.htm#i1008321
http://www.ludatou.com/?p=287
http://www.oracledba.org/upgrade/Upgrade_11gR1_RAC_to_11gR2_RAC.htm

ORA-03113: Error while upgrading the Database from 11.1.0.6 to 11.1.0.7

Hi,
I am trying to upgrade the database from 11.1.0.6 to 11.1.0.7 on OEL operating system.
After applying the patch "6890831" when trying to start the database using "Startup Upgrade" command I am getting the below error.
ORA-03113: end-of-file on communication channel
Process ID: 20826
Session ID: 170 Serial number: 3
I am getting the same error when trying to create the new database using "DBCA".
Please provide me the probable outcomes.
Thanks
Amith

Below entries found in alert_orcl.log file
MMNL started with pid=15, OS id=20571
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Thu Dec 03 20:11:11 2009
ALTER DATABASE MOUNT
Errors in file /u01/app/oracle/diag/rdbms/orcl/orcl/trace/orcl_mman_20557.trc:
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
MMAN (ospid: 20557): terminating the instance due to error 27103
Instance terminated by MMAN, pid = 20557
Below entries found in the Trace file generated
error 27103 detected in background process
ORA-27103: internal error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: -1
Additional information: 1
*** 2009-12-03 20:11:14.727
MMAN (ospid: 20557): terminating the instance due to error 27103

Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
Thanks,
eidnolb

Will it be possible to upgrade the software from LR 4 to LR 6?

I own LR 3 (full) and LR 4 (upgrade). Will it be possible to upgrade the software from LR 4 to LR 6 directly?

In the past, the upgrade version of Lr upgraded all versions from v1 onwards, and I see no reason why this should not be true this time, but can make no promises, mainly because I have no connection to Adobe.
So yes, you will probably be able to do as you want.

Upgrade the OS from Maver to Yosemite.. message "There is no enough disk space available to install this product". Please help.

I have 5.12gb space on my Macbook Air (Mid 2012). But when i attempt to upgrade the OS from Maver to Yosemite, i get a message "There is no enough disk space available to install this product". Please help

You need to temporarily free up additional drive space - the Yosemite download itself is just over 5GB and then it needs more space to install it. Once the new OS is installed the installer will be deleted. Music and movie files are large and will be the most convenient files to remove to an external drive.
On another note it isn't a good idea to try to run the computer with so little free drive space. Look for files you can offload to an external drive permanently. For example, I keep my music and movies on an external drive. You can keep a small assortment of music on the computer but save lots of space by keeping the regular media library off the computer.

Is their any other Processor better then a 2.9ghz intel core i7 that i could look into. I'm looking to make the computer faster & already upgraded the memory from 8GB to 16GB not realy noticing a difference

Is their any other Processor better then a 2.9GHZ Intel Core i7 that i could look into. I'm looking to make the computer faster & already upgraded the Ram from 8GB to 16GB and i'm really not noticing any difference actually it seems to be the same as it was before. Any help with this?

You will only notice a performance improvement if you haven't got enough RAM to use the applications you need. If you had a lot of free RAM before, you won't notice any difference now.
If you already have your computer, you can only replace the processor if you replace the logic board. Your computer requires a specific logic board, so you shouldn't replace it and you have to stay with the same processor. Apart from RAM, the only part you can upgrade is the hard drive. What will make an improvement is a SSD drive, if you haven't got one

I am trying now to Upgrade the UCS from 1.2 to 1.3

I am trying now to Upgrade the UCS from 1.2 to 1.3,
I follow the Procedure and guide , the guide said that the IOM staus should be Opera
bel , I have only Fabric A and no Fbraib B , and I connected The chassi to single IOM status operable, the a
the other IOM is saying accessibily proplems since no connectivity I have no Fbaric B. the guide said all IOM should be operabel.
now I send an FSM to reset the IOM but it is not function just retry .... you can find the tech support
are they any suggestion I am not sure to continue...

Thanks Jermey , it was really helpfull, now I am running the UCS with 1.3(o) version.
I have the ability to make the fisrt 8 port in UCS 6120Xp in 1 Gpbs but unfortunately
when I enabled port 2 for 1 Gpbs it show me failed link, please notice that the other upstream switch is
6513 catalyst have one port 1 Gb and I asked the admin there to enable the portfast and dot1q on the port , but i am not sure he do it.
the uplink on UCS shows failed , linked down and the properties of port is trunk.
is it necessary to have the upstream switch edge port work in fastport and dot1q mode ???
regards

Error while upgrading the patch from RMS 13.1.1.1 to RMS 13.1.1.2

Hi,
While upgrading the rms dbschema from 13.1.1.1 to RMS 13.1.1.2 we are getting the following error update ALC_FREIGHT_COST table or view doesnt exist.
We have checked the data model of rms 13.1.1 and rms 13.1.2 and we couldnt find the table "ALC_FREIGHT_COST."
So anybody could give suggestions on this.
Appreciate your help
Thanks,
Suresh

I'd ignore the error for the moment and file an SR with OracleSupport to make them aware of the issue and release a better script - all of this assuming that your 13.1.1 starting point is valid and correctly installed.
Additionally you can locate the SQL upgrade script that is actually trying to do something on the mentioned table, and grasp what it is trying to achieve and how relevant that is for you.
The table exists in our 13.0.3 setup. The release notes of 13.1.0 mention a rework of cost component functionality, so seems like it was deprecated in that release.
Best regards,
Erik

Upgraded the Database from 10.2.0.4 to 11.2.0.2 including statistics

Hi,
Recently I have upgraded Few Servers from 10.2.0.4 to 11.2.0.2 on Sun Solaris 64Bit X86.
BANNER
Oracle Database 11g Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Solaris: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - ProductionBefore the Upgrade We generated the stats at system level and Schema level and exported the stats into Table.
Database Upgrade was done successfully
Upgraded the System stats
Upgraded the Stats table and imported back to Schema's
Tested with Queries and they were OK
But some of the Queries which have DB Links started taking Hanging and seen wait events
WAIT #18446741324892168800: nam='asynch descriptor resize' ela= 3 outstanding #aio=0 current aio limit=4294967295 new aio limit=261 obj#=-1 tim=581083891935
WAIT #18446741324892168800: nam='SQL*Net message to dblink' ela= 4 driver id=1413697536 #bytes=1 p3=0 obj#=-1 tim=581084016896
WAIT #18446741324892168800: nam='SQL*Net more data from dblink' ela= 22 driver id=1413697536 #bytes=4 p3=0 obj#=-1 tim=581084030942 So I raised call with Oracle and gave me patch for fix "asynch descriptor resize" but the problem still exist with below wait events
WAIT #18446741324892168800: nam='SQL*Net message to dblink' ela= 4 driver id=1413697536 #bytes=1 p3=0 obj#=-1 tim=581084016896
WAIT #18446741324892168800: nam='SQL*Net more data from dblink' ela= 22 driver id=1413697536 #bytes=4 p3=0 obj#=-1 tim=581084030942 Normally in the 10g this Query used to come out under second
So I used the Hint 10.2.0.4 in the Query and the output came under second.
So I updated the optimizer feature parameter to 10.2.0.4 and then Queries started working fine.
In the Test Environment I was able to reproduce the same problem.
Test Case
Took the physical copy for the Upgraded DB
Run the same Query with 11.2.0.2 optimizer and saw the same problem
Deleted the Schema level stats
Generated the new stats
Executed the same Query(Out came under second)
Oracle Support Still working on this issue
As any one has faced this issue.
Regards
NM

You can do this also
1. Export 3 schemas with grants=y rows=N and import the data schema structure with grants
2.Check the log file for missing roles and create those roles using from dba_role_privs..etc
3. Import the data ignore=y option
Hope this helps
http://www.oracleracexpert.com
Click here to learn [Oracle data pump export/import with examples.|http://www.oracleracexpert.com/2009/08/oracle-data-pump-exportimport.html]
Click here to learn [Data Pump Export modes and interfaces|http://www.oracleracexpert.com/2009/08/data-pump-export-modes-and-interfaces.html]

Issues after upgrading the Obiee from 10g to 11g

Hi all,
We have recently upgraded our rpd from 10g to 11g. And a part of Webcatlog is being upgraded. We observe issues with the upgraded reports.
As the for the report prompts the script was taking lot of time. And the browser pop's a message either to 'stop' or 'continue'.
The report is taking lot of time to run than the usual 10g environment. And the path BP1 is also applied for the 11g environment.
Please suggest a troubleshoot method to overcome the issues with the upgraded reports.
Thank you,
Chris.

Check this pdf file
http://www.rittmanmead.com/files/biforum2012/ranka_performance.pdf
If helps pls mark

Change the status of the request from Released to un released.

Dear all
Some requests were created with no target system and were released.
these requests are to be transported to our Production System.
Is there any other way to transport these requests?
things I tried.
1. I tried to find the files in Cofile and datafile but could not find in trans folder.
2. tried to add the objects to new requests but facing problem while adding the key to the request.
Regards
Mahesh

Hi,
you have created the requests as local requests, it means you haven't mentioned Target system it will be treated as local requests so it wont create Cofiles and Datafiles.
and you can use the option Transport of copies and check. actually u can't change the request from the Rleased to Unreleased.
you have to create new request that's the only way if your not able to copy the objects to the new request or if the transport of copies wont work.
-Srinivas.korva

I have a pavillion DV6-2155dx and want to upgrade the processor from a I-3 to an I-5 or above.

I would like to get a link to the complete repair manual if possible also.
I have 4 gb of memory can i upgrade this also?
Thanks in advance for help!
cpuz screens

technolow wrote:
I have HP DV6-2155dx.
Intel Core i3-330M 2.13Ghz
4GB Elpida RAM
500GB 7200rpm Hard drive
I see a long list of AMD and Intel processors in the manual/guide link (pdf manual) for this thread.
Are those all compatible with my HP DV6-2155DX motherboard?
Is there a website/page where I can find specs on the motherboards from HP?
I am considering Intel Core i7-2820QM for my motherboard, is it compatible with my motherboard?
It is hard to find help for this laptop model.
I would like to think it is because this is a great laptop with minimal problems.
Thank you HP.
Hi,
That manual is for a different Dv6 series (Sandy Bridge - Dv6-6000). The laptop has a shared graphics Intel chip so it might not be possible to upgrade to Core i7-720/820QM but should be possible to upgrade up to Core i5-580M as it takes 35W (use the same fan/heat sink) as the original CPU. The RAM can be upgraded up to 8GB of DDR3 - 1066MHz memory. 1333MHz DDR3 modules might work too but will downclock to 1066Mhz so no need to buy them anyway.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

I've upgraded the Discoverer from release 4 to 10.2.0.3

Similar Messages

Maybe you are looking for