I view help

i am getting duplicate / multiple variable in my i view how is this possible.
for example
sold to - comes twice
customer - comes twice
all variables come twice
any idea why

hi,
Configure the list of values to appear in value help using three steps provided by the wizard:
       1.      Select the type of value help to add on the Add Value Help for Selected Input Field screen
       2.      Select the data service that provides the values on the Select Data Service screen
       3.      Configure the advanced options on the Specify Data Service Runtime Parameters screen (optional for BI systems this screen appears only if you have deselected the Hide advanced configuration options (BI systems only) checkbox on the Add Value Help for Select Input Field screen)
When you have completed the steps, the wizard generates an embedded iView that represents the value help dialog box and its functionality. Next to the input field, the wizard also generates a value help button. At runtime, when the user presses the button, the dialog box appears and lists values for the input field.
this links provides the info related to variables...
[http://help.sap.com/saphelp_nw70/helpdata/EN/b5/036d391f074f769e00602634ee9960/frameset.htm]
hope it helps U
regards,
NR

Similar Messages

Issue with Smart View Help Contents using v11.1.2.0.01

Hi there,
I just installed v11.1.2.0.01 (Build 003) of the Smart View add-in on a MS Windows XP SP2 PC with MS Office 2003 SP3.
Unfortunately, the Help Contents in MS Excel does not seem to work as whenever I select Smart View > Help > Contents, nothing gets displayed. Selecting Smart View > Help > Technical Support and Smart View > Help > EPM Documentation takes me to various links on the www.oracle.com site.
I uninstalled then re-installed this specific version a few times but to no avail. I even checked the contents of each subdirectory where Smart View has been installed but could not find any Help files whatsoever.
1. Has anyone ever encountered this issue?
2. If yes, what do I need to do to resolve this issue and get the Smart View Help to be displayed?
Thanks in advance,
JBM

Well, reading the documentation about knowing where to find the documentation would have actually helped. At the bottom of page 10 of the Smart View ReadMe document, the following is mentioned under the "Documentation Updates" section:
"For Smart View online help to be available, the Shared Connections URL on the Advanced page of the Options dialog box must contain an EPM Workspace URL."
This question is now answered.
JBM

Error view help......

I have the following problem in weblogic 10.3.2.
when I connect to the administrative server, and try to view help within the "How Do I. ..", I get the following error:
Error> <netuix> <BEA-423405> <An exception [java.lang.NoClassDefFoundError: javax/servlet/jsp/tagext/BodyTagSupport] was thrown while rendering the content at [jsp/TOCView.jsp].
javax.servlet.ServletException: java.lang.NoClassDefFoundError: javax/servlet/jsp/tagext/BodyTagSupport
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:67)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:531)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:235)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: javax/servlet/jsp/tagext/BodyTagSupport
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:621)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.servlet.jsp.tagext.BodyTagSupport
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at sun.misc.Launcher$ExtClassLoader.findClass(Launcher.java:229)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
Truncated. see log file for complete stacktrace
in the classpath are loaded libs weblogic.jar & weblogic_sp.jar.
someone is because the error occurs?
thanks.

I have the following problem in weblogic 10.3.2.
when I connect to the administrative server, and try to view help within the "How Do I. ..", I get the following error:
Error> <netuix> <BEA-423405> <An exception [java.lang.NoClassDefFoundError: javax/servlet/jsp/tagext/BodyTagSupport] was thrown while rendering the content at [jsp/TOCView.jsp].
javax.servlet.ServletException: java.lang.NoClassDefFoundError: javax/servlet/jsp/tagext/BodyTagSupport
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:67)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:531)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:235)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: javax/servlet/jsp/tagext/BodyTagSupport
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:621)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.servlet.jsp.tagext.BodyTagSupport
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at sun.misc.Launcher$ExtClassLoader.findClass(Launcher.java:229)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
Truncated. see log file for complete stacktrace
in the classpath are loaded libs weblogic.jar & weblogic_sp.jar.
someone is because the error occurs?
thanks.

File edit view help missing in acrobat XI

I am running Windows 7 Home Premium SP 1. Most of the time when I open a PDF file everything is fine. However, I have lately had several PDF's open and when I open another, the File, Edit, View, Help tabs are missing as is all the info above where these tabs should be including the minimize, restore down, close icons. F9, F8 and Ctrl+Shift+M do not help. Any ideas?
Thanks,
Warren

Sounds like an issue with your graphics driver and Acro running out of resources for hardware accelerated page rendering. turn it off in the prefs and/or update your graphics driver.
Mylenium

Unable to view help when press F1. CHM File too large?

We have a chm file who contained many PDF files (its size is
13MB) and some people cannot view help when press F1. This file is
a part of merged chm files structure (the total size of these files
is 17MB)
Do you think that the size of the file contained PDF may be
the problem?.
Thanks!
TTW_MaryseC

Maryse,
I don't think the size of the file should be an issue, even
when it's 13 MB. I'm sure that other people have been distributing
much larger files than this without problem for many years.
You say "
some people cannot view help", which suggests that other
users are not encountering the problem. In other words, the methods
that your software developers have used to connect the help file to
the application do work properly, if not for all users.
When users who cannot view the help press F1, does nothing
happen, or does the help viewer open but with an error message in
the right-hand topic pane? Is the large file the only one that is
affected by this issue, or are all the other help files in the
collection also affected?
If it's of any interest to you, you don't need to compile a
PDF file into a help file in order to display the contents of the
PDF in the help file. Microsoft has published the following script
for linking to an external file from a help topic:
http://msdn2.microsoft.com/en-us/library/ms644690.aspx
Pete

Unable to view help and filter problems

Hello,
First of all I'm a newbie on MacOSX and really happy to use it.
I'm having some problems using Mail.
I have 2 IMAP accounts with a lot of folders and sub-folders. I want to create filters to automaticaly put mails into the right box.
Creating rules is easy but when I want to choose a box in a folder, I need to open this folder in Mail before I can choose it in my filter. Example:
INBOX
|-Folder 1
| |- box 1
| |- box 2
| |- box 3
|-Folder 2
If Folder 1 is closed, the filter interface don't expand it and I cannot choose box 1, box 2 or box 3.
I try to search in the Help menu. The application launches but nothing appears. Looking into the library, I can see help for others applications but not for Mail.
Can someone help me to debug this ?
Thanks for help.

Maryse,
I don't think the size of the file should be an issue, even
when it's 13 MB. I'm sure that other people have been distributing
much larger files than this without problem for many years.
You say "
some people cannot view help", which suggests that other
users are not encountering the problem. In other words, the methods
that your software developers have used to connect the help file to
the application do work properly, if not for all users.
When users who cannot view the help press F1, does nothing
happen, or does the help viewer open but with an error message in
the right-hand topic pane? Is the large file the only one that is
affected by this issue, or are all the other help files in the
collection also affected?
If it's of any interest to you, you don't need to compile a
PDF file into a help file in order to display the contents of the
PDF in the help file. Microsoft has published the following script
for linking to an external file from a help topic:
http://msdn2.microsoft.com/en-us/library/ms644690.aspx
Pete

What r the trns code for maintenance view, help view and projection view

hi all
what r the transaction code for maintenance view, help view and projection view
can anyone tell me how to create maitenance, help and projection view.
with an example
regs
hari

What is the Different Types and Usage of Views
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View (SE11)
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
reward points if it is usefull...
Girish

Streaming QuickTime movie without any links (i.e.:"file, edit, view, help")

Hello all,
I am streaming videos, using 'VitalStream', for items I have for sale. The local governing board of the organazation/web site I am posting these movies on will not let me post any 'links to other areas of the web site where there is promotional information'. So, the 'file, edit, view, help' on the quicktime player or movie is considered 'links' according to the organization.
Is there a way I can export the movies, from iMovie HD or GarageBand or QuickTime Pro, so those links do not show on the streaming video? All I want to show is the movie and the play/pause functions, or if I can get it to just show the movie and sound that would be o.k. too. The majority of people who will be viewing these movies are using PC's. Should I get 'flip 4 mac' and convert it to wmv, will that cut out the 'links'?
PowerBook G4 1.67 Mac OS X (10.4.8) iPod 80 G, iLife '06, iWork '06, QuickTime Pro, Sony DCR-HC96.

Not familiar with Vitalstream...but if you embed your QuickTime movie into a web page, you can control whether or not there is a controller, and there is no player skin involved. The movie you embed can be either a full movie, or a reference to a movie running on a streaming server somewhere.
The key is that instead of opening the movie in QuickTime player, you want it to run in the browser plug-in. Here, let me show you a couple of examples from my own pages. The code is fairly clean; feel free to rip off my embedding code if you want.. 8-)
The most basic form of movie embedding can be seen on this page where a movie plays within the page, with its controller, which includes a play/pause control and a scrubbing bar.
By comparison, on this page, about halfway down on the right-hand side there is an embedded movie with no controls on it, set to loop continuously. Again, you can look at the source to see how it was done.
Please note that I'm using an old form of object embedding that has some issues in Internet Explorer. It still works, but in order to use the controllers the user has to click on the movie twice. Also, in my case, the movies are stored on my web site, and are not streamed at all. If I were using a streaming host, I could put a reference movie on my site and use it to point to the stream.
--Dave Althoff, Jr.

Can not view help in any adobe product

In Photoshop, Bridge & Device Central, Adobe Help Viewer 1.1 opens with message "This topic is in the Help system of another product. To view the topic, install that product. about:blank"
In Adobe Reader, Adobe Help Viewer has message "File not found. about:blank"
In all cases the product name then chosen from the "help for:" pull-down menu only displays momentarily before leaving the "help for:" field empty again.
I run win XP with SP2 & Photoshop CS3 Extended (English version).
All latest Adobe updates are installed. I updated Adobe Help Viewer to version 1.1.198 for Danish windows (as per knowledgebase} to no effect & reset preferences with control+alt+shift+ click help which didn't appear to do anything.
Opening help via C\prog files\adobe\adobe help viewer 1.1\ahv.exe results in the same message etc.
All the photoshop help files are in C\prog files\common files\adobe\help\ en.us\photoshop\10.0 & help works ok clicking on help.html
After four PS reinstalls & a week of patiently reading posts, I've found similar CS2 problems but CS3 help file layout is different & I'm not good enough to translate.
Any help would be appreciated.

http://forum.java.sun.com/thread.jsp?forum=31&thread=276607

Month view help

Hello,
I am new to this whole Mac experience and am quite pleased so far but i do have a question about iCal and the way it's month view shows events. I frequently have events that span multiple days, i.e. begin at 3am on the 3rd and end at 11pm on the 5th. When iCal shows this event in "Month" view, it only puts an event on the 3rd and not one spanning the entire time as would an "all day" event. As someone coming from Microsoft Outlook, this was a great feature to have especially when events backed up to each other. Entourage does what I am asking it to do, but I'm not sure I want to pay for that...
thanks for all your help.

I have this problem too. Just started today all of a sudden. When I am in iCal on my Macbook, I double click - like I have been doing since ical was invented - and nothing happens, other than a quick "updating" message. I tried clicking the "+" button but all it gives me is "quick event" to add but nothing ever shows up in my iCal calendar on my mac. When I log into to iCal in the Cloud - lo and behold! - I see dozens and dozens of "new event" entries all over my calendar! What is going on and how can this be corrected? At this point my computer's ICal program is basically now useless since I am prevented from adding anything to it.

Simple viewer help

Hi all, I need your help. I have created my website, and I'm linking it to mobile me galleries. (no problem). But-- instead of mobile me galleries I would like to link to Simple Viewer.
No problem creating the SV galleries in iphoto , but getting them on my site is baffeling.
I have read all the posts, and have had no success. I am a novice and the nominclature is rough
As I said , I created the gallery folder and placed it in the sites folder on my idisk. when I click on the index folder within the gallery appears and the address is file:///Volumes/rgardnerimages/Web/Sites/slideshoe/index.html nothing I do is linking it to a web page. Any help in simple language would be helpful.
My website is http://www.richardgardnerphotography.com/RichardGardner/richard_gardnerhome.html
Thanks in advance
Richard

Its so long since I did this that I to look back and see where my files were uploaded and how they are organized.
Its seems I have the following files uploaded to the main folder on my server:
flash_detect.js
image data.xml
images
PostCard.html
thumbs
viewer.swf
PostCard.html is the index.html file renamed so that it doesn't conflict with the index.html file generated by iWeb.
If you are using MobileMe to publish you can upload these files to the Finder/Go/iDisk/My iDisk/Web/Sites folder and the URL will be..
http://web.me.com/username/PostCard.html
Its probably better to upload them to your website folder. The path is Finder/Go/iDisk/My iDisk/Web/Sites/WebsiteName folder and the URL for the link to it will be ....
http://web.me.com/username/WebsiteName/PostCard.html
These uploads are done by drag and drop. Follow the path from the Finder/Go menu or do Shift - Command - I from any Finder window and then double click the Web then the Sites folders to get to your actual website folder.

Possibly a very basic question but I have set up a spread sheet in Numbers and have viewed help videos but I can't get it to give me sums for the columns I highlight. Keeps coming up with the figure zero. I have version 09 2.3(554). Can anyone help

Possibly a very basic question but I am going nowhere without a solution. I have set up a spreadsheet in Numbers but it won't give me sums for chosen columns. I have viewed the run through videos and used the formula but nothing happens apart from giving a figure of zero or a red arrow. The sum icon in the bottom left hand section of the window does not highlight or show any total as I understand from the video that you can drag whatever total is here onto the relevent position on your spreadsheet. I have Numbers 09 version 2.3 (554). Can anyone advise. Thanks.

Hi Sohojools,
To sum a column, use a formula such as this one in Cell A6
Type this in a cell below your data:
=SUM(A2:A4) or whatever range of cells you want to sum. The easy way is to type:
=SUM(
and then drag or shift-click to select the range of cells. Close the formula with a final bracket ")".
The sum icon in the bottom left hand section of the window does not highlight or show any total
To see the sum (and other simple statistics) in the bottom left, select a range of cells. That tells Numbers which cells you are refering to.
The videos are good, but the Numbers'09 User guide, and the Formulas and Functions User Guide are better. Download them from the Help Menu in Numbers.
Regards,
Ian.

Materialized Views Help

Hi,
I need help for following two questions.
1. I have created a materialized view with following syntax in 11g R1 database.
CREATE MATERIALIZED VIEW fr_emp_bonus_record_vw
BUILD IMMEDIATE
REFRESH COMPLETE
START WITH SYSDATE NEXT SYSDATE+1/48
ENABLE QUERY REWRITE AS
SELECT person_id, <columns>
This MV will have around 300K records and this MV will be used in other queries based on person_id. So I have created an index on mv.person_id with following syntax. I have chosen REFRESH COMPLETE, I am assuming that, Oracle truncates this table and recreates it. When it recreates this MV, does it analyze automatically or do I need to do it manually.
CREATE UNIQUE INDEX mv_u1 ON mv(person_id);
2. It takes around 2 minutes to populate 300K. While it is populating the data, if somebody accessing this view or query where this view is being used, are they going to get any error?
Thanks in advance

Hello,
1/ No it does not perform the analyze automatically, but with Oracle 11g, analyzes will be performed during the night with a scheduled job.
2/ No, you won't have any error if you access the materialized view during the refresh.
Hope this will help.
Best regards,
Sylvie

JOIN/QUERY/VIEW Help

Hi guys, i'm new to the forum. currently i'm taking a computer information tech diploma course and am in entry level database.
Ive struggled my way through this assignment.. I don't want free answers but im done everything except one view and a bonus question. Can someone help me ? not just the answer but an explination.. I'm finding Joins and Subqueries very hard to wrap my head around.. anyways here are the two questions:
6) To help the front desk clerk do guest billings, [a - 6 marks, b - 2 marks]
(a) create a view to calculate the account (i.e. running total todate) for each guest at the Grosvenor Hotel; the view should include the room number, guest name, check-in date, check-out date (today), room rate, the duration in days, and the calculated total dollars
(b) write a SELECT query to demonstrate your view (Use 2007-10-09 as current date if needed).
Optional Bonus Question: up to 10 marks but restricted by allowable maximum for course:
7) Find the most commonly booked room type(s) for each hotel in London? For each hotel, list the hotel number, room type and the number of bookings.
Here are the tables, let me know if you need the data inserted.
CREATE TABLE Hotel
(hotelNo NUMBER(4) NOT NULL
,hotelName VARCHAR2(16) NOT NULL
,hotelAddress VARCHAR2(40) NOT NULL
,PRIMARY KEY (hotelNo)
CREATE TABLE Room
(hotelNo NUMBER(4) NOT NULL
,roomNo NUMBER(4) NOT NULL
,type VARCHAR2(8) NOT NULL
,price NUMBER(6,2) NOT NULL
,PRIMARY KEY (hotelNo, roomNo)
CREATE TABLE Guest
(guestNo NUMBER(4) NOT NULL
,guestName VARCHAR2(15) NOT NULL
,guestAddress VARCHAR2(40) NOT NULL
,PRIMARY KEY (guestNo)
CREATE TABLE Booking
(hotelNo NUMBER(4) NOT NULL
,guestNo NUMBER(4) NOT NULL
,dateFrom DATE NOT NULL
,dateTo DATE
,roomNo NUMBER(4) NOT NULL
,PRIMARY KEY (hotelNo, guestNo, dateFrom)
thank you, and go easy :}
Edit/Delete Message

John CIT,
I would advise you to visit here
http://www.oracle.com/pls/db92/db92.federated_search
You will information regarding creating views, etc.
After reading the documentation if you still have
doubts. Then please ask.
The whole point at least from my end is that I should
see some of your effort too for the problem that has
been stated.
Good luck
AdithI agree, ive tried to make both work and failed or else i wouldnt have posted..
I know for the view (#6) I have to select guestNo, roomNo, dateFrom, dateTo, price, dateFrom, price*(dateFrom-dateTo).. im just not sure how to join them all together properly.
for #7 im going to have to use a count aggregate from rooms in the booking table thats joined with Hotel..
ive been working on this man im just confused. at least point me in the right direction?
thanks for response

ABAP List Viewer help

Hi.
I have a abap list viewer, when I do a filter by the first name with 'XXXX' the program doesn't find any data, but if no filter as been done the XXXX appears. How can I solve this?

Hi,
I guess that the data that you are getting is in caps ( XXXX ) and you must be using small letters ( xxxx ) while putting a filter on the field.
This filter is case-sensitive. Try using the filtering the data in the same manner as you get from the database table. Give it a try may be it works..
Hope this helps you.
Regards,
Tarun

Please help - image viewer help needed

hi
can anyone plase help
I am building a CSS site and want a simple image viewer -
just one image viewing in a box with >> and << buttons
for the user to scroll through images. I know that dreamweaver has
a built in Image viewer but it does not work properly. It will not
go back to the first image after it has gone forward to the next
images. Even the tutorial does this.
Does anyone know why this happens or can anyone direct me to
a good tutorial that will provide instructions for this?
I know that there are many add ons to deal with this but it
is only a small function that I should be able to produce myself.
Many Thanks

If you're building a CSS site you might not want to use
Flash. Try Googling
for "lightbox". If you have a development budget, you might
also want to
have a look at this:
http://www.projectseven.com/products/galleries/ssm/ssm_01.htm
Al Sparber - PVII
http://www.projectseven.com
Extending Dreamweaver - Nav Systems | Galleries | Widgets
Authors: "42nd Street: Mastering the Art of CSS Design"
"sarah louise water" <[email protected]>
wrote in message
news:fhocso$61t$[email protected]..
> hi
> can anyone plase help
>
> I am building a CSS site and want a simple image viewer
- just one image
> viewing in a box with >> and << buttons for
the user to scroll through
> images.
> I know that dreamweaver has a built in Image viewer but
it does not work
> properly. It will not go back to the first image after
it has gone forward
> to
> the next images. Even the tutorial does this.
>
> Does anyone know why this happens or can anyone direct
me to a good
> tutorial
> that will provide instructions for this?
> I know that there are may add ons to deal with this but
it is only a small
> function that I should be able to produce myself.
>
> Many Thanks
>

I view help

Similar Messages

Maybe you are looking for