I views question.

Is there a list of every iview available? All I can find is a list of the business packages available but they do not make it easy to find the iviews available in each package. Specifically I am looking for iviews for the following:
Tcode: KP06, SART, (budgeting/cost center) and PM
Regards,
Davis

When you look at the question you posted you see the number of people who looked at the question, but did not make a reply. That is the "views". There is nothing to read. The 3 who replied are shown as "replies" and you have seen those already. I hope that clarifies this for you.
laverne's mom

Similar Messages

ICal Mini-Month View question

A quick question.
Using iCal on Leopard...I noticed the mini-month view doesn't show any marks on it for days that have events. I seem to remember a little dot on the days, in Tiger. Or am I just spoilt looking at the month view on the iPhone, or iPod Touch?
Is there anyway of having it have little dots or halos or anything to indicate when I have an event on a certain day in the mini-month view?

Last thing about iCal which I think could be fixed, is that it would be easier to type down events and making line-breaks if one whouldn't have to hold 'Alt' in while doing it. I make line-breaks much more often than I finish editing an event (in which case you just press enter or click outside the event you were editing). It would be better to press 'alt' + 'enter' in order to finish editing an event, and reserve the action of just pressing 'enter' for line-breaks. This, btw, was also this way in iCal 4.
Ok, last last thing: in the preferences of iCal one can add a default alert to all new timed events and invitations and one can specify how many minutes before one wants to be alerted. I do not want to add a default alert to all new events/appointments, but I would like to be able to specify the default number of minutes put on all new alerts that I put on events. It seems quite intuitive to me that the default number of minutes one can specify for every alarm added to events by defult (if that option is checked in the preferences), should be the defult number of minutes set to alarms one manually puts on events, in stead of the '15 minutes before' default that is in the system and which seems to be unchangable.
If it says '0 minutes before the start time' there, then all alerts that I manually put on events should have this value put to zero by default!

ICal view question

New Mac Book Pro user.
Just bought last night and am setting up calender.
iCal is displaying events from 1:00pm and later but will not allow me to view or add events earlier.
Is there a simple fix for this?
With thanks from a new Mac user.
Don

Thank you both for the response, even the one that inferred I was a twit.
The reason I posted the question is that the preferences in iCal are 5:00 am to 5:00pm but but the view on the calendar is 12:00 pm to 12:00 am.
I had assumed the comment associated with "preferences" was some place other than iCal as they appear to be set correctly.
Is it possible that there is a problem with either the software or some setup in the computer date and time controls?
Thanks again for any comments, Don

Viewing and purchasing on Desktop / Web Viewer Question.

I understand that if you share free content via your iOS app it can be viewed in a browser (with some features missing like swiping of images .)
My question is this....
I have a Professional account... Can a person purchase the magazine and view the whole magazine via a Desktop computer with the DPS Web Viewer? Or its only limited to free content on your web browser but they have to have a iPad to view the whole mag? Do they get full access on the desktop if they purchase.
Thanks
Ron

For a professional customers, only the free content that was shared can be viewed on the web viewer/desktop. For enterprise customers, restricted content can be accessed via entitlement using the Content Viewer for Web SDK

Smart View Question: Data cell have modified.

Hi all,
I've a question on an Hyperion Smar View Alert.
I've created a report in excel by using some VBA Macro to create a data to submit.
The situation is tha in some cells of the report There is a formula linked to another sheet.
All macros work fine when the sheet is not connected but when i connect it end thh sheet is actived during the refresh Smart view Show me a message:
data cell have modified dou you want submit it to proced.
I click on button "NO" and so i can view all data with the formula ready for the submition without submitted tha data first.
I want to submit data only after some control ceck.
To this regards I'll want to know if is possible to disable this alert message?
Thnks for the help.
Regards
E. G.

Ensure that the new sheet you copied your data to is connected to the appropriate essbase/planning server. Go to Hyperion>Active connections and click on your database.

Create Materialized View question

Hi all,
I have a question about MV.
Toad creation wizard of a new snapshots (materialized view) on "Refresh Info" tab I set
Refresh mode: complete On demand
With: ROWID (I can't use primary key because on my table there isn't PK)
Writing teh query, next the Materialized View is successfully created and this is a toad script:
CREATE MATERIALIZED VIEW ASDF
TABLESPACE USERS
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
REFRESH COMPLETE ON DEMAND
WITH PRIMARY KEY
AS
select CDA_PART, DES_PART, DES_MAT, CDA_APPART, CDA_PROVEN
from ldanapr01
where dat_end>(sysdate-1);Why is specified WITH PRIMARY KEY if I created the view with ROWID option?
Indeed if a drop a MV and directly run the create VM script above obtain error ORA-14012 table 'LDANAPR01' does not contain a primary key constraint.
So, if I modify the script in this way
CREATE MATERIALIZED VIEW ASDF
TABLESPACE USERS
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
REFRESH COMPLETE ON DEMAND
WITH ROWID
AS
select CDA_PART, DES_PART, DES_MAT, CDA_APPART, CDA_PROVEN
from ldanapr01
where dat_end>(sysdate-1);the MV is successfully created!!
What is difference between WITH PRIMARY KEY and WITH ROW ID... and why Toad show always the created MV script as WITH PRIMARY KEY ?

>
WITH PRIMARY KEY is used to create a primary key materialized view i.e. the materialized view is based on the primary key of the master table instead of ROWID (for ROWID clause). PRIMARY KEY is the default option. To use the PRIMARY KEY clause you should have defined PRIMARY KEY on the master table or else you should use ROWID based materialized views.
Primary key materialized views allow materialized view master tables to be reorganized without affecting the eligibility of the materialized view for fast refresh.
Rowid materialized views should have a single master table and cannot contain any of the following:
* Distinct or aggregate functions
* GROUP BY Subqueries , Joins & Set operations
source : http://www.dbasupport.com/oracle/ora9i/mat_views2.shtml

Materialized view questions..

Hi all..
Please help me with the following question on materialized view.
I need to create a MV on my LOCAL_DB on a table which is on REMOTE_DB.
Do i need to created the materialized view log in the ""REMOTE_DB".
1)
Is there any cons using the materialized views? I mean , is there any maintence needed
when the database got shut down or
2)
I am creating the materliazied view as ""select * from table_name"".
If the base table changes, does it effect my materialized view.
I have the following sqls to create mv, please let me know whether that are correct.
-- LOCAL_DATABASE
CREATE MATERIALIZED VIEW plates_mv
REFRESH Fast
START WITH SYSDATE
NEXT SYSDATE + 1
AS SELECT * FROM plates@home_dmv.world;
-- REMOTE_DATABASE or LOCAL_DATABASE??
CREATE MATERIALIZED VIEW LOG ON plates;
Thank in advance.

+Do i need to created the materialized view log in the ""REMOTE_DB".{code}+
Yes.If you want your materialized view is fast refreshable.
+{code}
1)
Is there any cons using the materialized views? I mean , is there any maintence needed
when the database got shut down{code}+
It all depends.If remote data base got shut down Materialized view won't refresh. refresh will fail and oracle try again to refresh till it reaches max failure count i.e 16.
If current DB got shut down ....It is like a regular table and it will refresh as per next refresh scheduled time.May be this time it would do complete refresh.
+{code}2)
I am creating the materliazied view as ""select * from table_name"".
If the base table changes, does it effect my materialized view.{code}+
Never create a Mview using "select *". If Remote DBA added/Dropped columns for remote table then your Mview refresh will end up with errors.So Always specify the column names in the definition.
create mview log on Remote table. first time it will do the complete refresh and from next refresh it will use the Mview log to fast refresh. Use refresh Method as "Force" let oracle decide which refresh it wants to do.
Hope this info helpful!
First read the documentation or related information and understand about the Materialized views then implement or Test it in your Dev or your localDB environment.

Novice window/View question (fixed) -- please comment on code

(fixed this to look right, thanks for the posting tip)
Hey, I am using the iPhone SDK, and this is my first non-licensing question, which means it's going to be a very basic one.
I'm able to start a project, using a ViewController template, edit the XIB file, and then have those controls show up. I'm able to create outlets and inlets and handle user input and output to those controls, all well and good.
Where I'm getting hung up is when I want more than one view. I've read the "how to use the ViewController" documentation, which is more like a "how to" guide for specific subclasses.
All I want to do, for now, is to create two views and swap back and forth between two views. My strategy was to create a parent view (just a container), then create two viewcontrollers (with their views) and then set both their views to the addSubView function of my parent view. Then I was going to use the bringSubviewToFront method to swap between the two, if all goes well then using different animations.
So I did the below in my DidFinishLaunching event handler. All I get is a white screen. Can someone correct my code below, given the intent above? I would learn a TON from the answer, I'd be on my way.
Thanks very much in advance.
- (void)applicationDidFinishLaunching:(UIApplication *)application {
UIView *v = [UIView alloc];
m_pParentView = v; // declared in class interface as UIView *m_pParentView;
ViewCtrlSub1 *vcs1 = [ViewCtrlSub1 alloc];
[vcs1 initWithNibName:nil bundle:nil];
[m_pParentView addSubview: vcs1.view];
ViewCtrlSub2 *vcs2 = [ViewCtrlSub2 alloc];
[vcs2 initWithNibName:nil@ bundle:nil];
[m_pParentView addSubview: vcs2.view];
[window addSubview: m_pParentView];
[m_pParentView bringSubviewToFront:vcs1.view];
// Override point for customization after application launch
[window makeKeyAndVisible];

The Utility template makes two content views that transition with the "flip" view animation. The root view is only used to position the Info style button on the main view. I.e. the root view itself is never visible. I didn't mean to imply that template provided the UI skeleton you were looking for, since you didn't describe what you're looking for. But the toggleView method in RootViewController.m is a good example of how to transition between two views without using a tab or nav view controller (since I assumed that was what you were trying to learn).
If you're still in the dark after studying and playing with the Utility template, the place to go is Chaper 6 of +Beginning iPhone Development: Exploring the iPhone SDK+ by Mark and LaMarche. In my opinion it's almost self destructive to try and learn iPhone programming without that book.
If you describe the view structure you want, I can give you some more hints, but you won't learn much by just pasting in a code sample.

Applet viewer question

Well here is my first question of what promises to be many. Nice to meet you all. Here goes:
While doing the first applet in "Your first cup of Java", I run the applet by typing:
appletviewer Hello.html
The applet runs in the applet viewer and looks just like the picure says it should. But I also get this warning in the command prompt:
Warning: Can't read AppletViewer properties file: C:\WINNT\Profiles\PURCHASER\.h
otjava\properties Using defaults.
Anybody know what the problem is there?
Thanks.

I wouldn't worry about it, I get the same errors using the computers at Uni. It's never stopped me anyway. I'm not sure what causes it, something to do with WinNT/2000 and profiles/users.
Cheers,
Radish21

Design View question

Good evening,
I'm working on a site using a Dreamweaver template and for
some reason my "Design View" shows up only like you'll see in the
top image on this page:
http://community.middlebury.edu/~nmeiers/question.htm
I want the pages to appear like the template I put on the
bottom so I can see the design. It used to look like that and I
don't know what I changed. Any ideas?
(Yeah, I know Design View isn't ideal, but I'm not very good
at this and I like seeing the graphics.)
Thank you,
Nick

Looks like for the top image the style sheet isn't attached.
Walt
"Topkdlfs" <[email protected]> wrote in
message
news:gcro26$pnf$[email protected]..
> Good evening,
> I'm working on a site using a Dreamweaver template and
for some reason my
> "Design View" shows up only like you'll see in the top
image on this page:
>
>
http://community.middlebury.edu/~nmeiers/question.htm
>
> I want the pages to appear like the template I put on
the bottom so I can
> see
> the design. It used to look like that and I don't know
what I changed. Any
> ideas?
>
> (Yeah, I know Design View isn't ideal, but I'm not very
good at this and I
> like seeing the graphics.)
>
> Thank you,
> Nick
>

Layout / Design View questions

This is the sort of thing I've wondered about before, but
would really like to get to the bottom of.
Sometimes things seem to go a bit funny in design view -
although the page will display correctly in a browser - but can
anyone let me know if there is something not quite right somewhere,
or if it actually really matters?
As an example, I've posted some screenshots on the link
below. The only difference is that the 'footer' div has been added
to the second page. They're both fine in the browser, but as you
can see from the screenshots, the first is fine in design view, but
the second (the bottom two screenshots) it all looks wrong.
Basically is this anything to worry about?
Even if it isn't, it is a bit annoying, as from a design POV
it's good to see things as they should be!
screenshot
1
My second question is about TD widths - in these pages I have
a wrapper div set at 780px, and in the table containing the
navigation, they navigation buttons/graphics seem to need to be one
px narrower than they actually are (54 instead of 55px etc) in
order for them to line up to the total 780px, as per the screenshot
below :
screenshot
2
If anyone could shed any light on any of this it would be
greatly appreciated.
Cheers,
Iain

dukla wrote:
> Basically is this anything to worry about?
No its nothing to worry about.
I don't know what version of DW you are using but all
versions up to
2004 didn't handle css that well.
I believe DW8 has improved. However having said that I have
found a lot
of the time that it also has a lot to do with how you write
the css. I
can't believe version 8 can possible cover all eventualities
so it
probably still shows the odd thing or two incorrectly.
Personally I never had much trouble with DW04. It works
pretty well with
the css I write.
> Even if it isn't, it is a bit annoying, as from a design
POV it's good to see
> things as they should be!
Yeah it does get a bit annoying but you have to work through
it.
> My second question is about TD widths - in these pages I
have a wrapper div
> set at 780px, and in the table containing the
navigation, they navigation
> buttons/graphics seem to need to be one px narrower than
they actually are (54
> instead of 55px etc) in order for them to line up to the
total 780px, as per
> the screenshot below :
>
>
http://www.handprintwebdesign.co.uk/CollinsBartholomew/tableDesign.htm
>
> If anyone could shed any light on any of this it would
be greatly appreciated.
I don't think this web thing is totally precise and sometimes
you have
to 'hack' it to do the job. Usually if thing are a px out I
don't bother
unless it screws the design up in too mmnay browsers.

Query View questions

Hi,
Can anyone tell me how I can find out what query belongs to a query view? A table out there?
Found the answer to this question: Table RSZWVIEW.
Also, if a person has access to the query do they automatically get access to the view?
Thanks!

You are correct about the table. There is a trick for query views. You must insert an entry into the RSADMIN table in order to start checking for authorizations based on query views, otherwise, it simply uses the query. There is an OSS note: 601090. Hope this helps.
Thanks,
Jeff

Canvas "View" Question - FCP 6.05

FCP version 6.05 - A question about the canvas (and viewer also) window "view" choices. Please refer to the lefthand-most pop up menu (located between the time code windows.) While I keep my canvas and viewer set to "Fit to Window", I would like a clarification of "Correct for Aspect Ratio" at the bottom of the view choices. What exactly is being corrected? At times this line is grayed out; others not. It's not covered in the manual (at least I cannot find it), nor can I find it in the APTS book

Video pixels are not square (unlike the way computers display pixel). Video pixels in a 4:3 frame are narrower than tall and those in a 16:9 are wider than tall. If you are shooting DV/NTSC, both images are 720x480 pixels.
Using "correct for aspect ratio", will display the images using non-square pixels - ie as your television will display the image.
If you do not select "correct" the image will be displayed using square pixels with the result that a 4:3 image will be stretched horizontally and the 16:9 image will be squished horizontally.
x

ITunes List Window View Question

Apologies if this is not the correct place to post this, but...
I like having the 'kind' category visible after the 'Artist' and 'Album' category lists in iTunes. I use Edit>View Options to do this but it only affects the current playlist (or the Library)
Can I change all the playlists to show the categories this way or do I have to go thru each one?
ta
d

You will probably get more response posting your iTunes question here:
Using iTunes

Moved from iMovie to Express, viewer question

Hey all-
I made the move to FCE from iMovie HD/iMovie '08, and the first video I wanted to play with shows up choppy when I watch it in real time in the Viewer. When I cut it up and put it in the canvas and render and watch, it's flawless. Maybe this is a newb question, but does the viewer always lag when viewing the video?
Thanks.

I am having a similar problem. I captured DV video in iMovie08 a few days ago but when I import that video into a FCE project it is choppy in the viewer. About every second or so, at a regular beat, it has a slight pause then continues on. If I put it into a sequence it plays fine from there. The captured video also plays fine in Quicktime. I captured the same video again, using FCE this time, and it works fine like that.
I plan on recapturing the video anyway so I guess I don't really care, it is more of a curiosity to me. When capturing video in iMovie I noticed some dropping of frames here and again (but no warning to that effect) and had to do some recaptures. I got a bit disillusioned with its ability to capture. Since I wasn't watching during the entire time, I have no confidence in the quality of the captures I made. These dropped frames are, I think, a different problem than the one above about stuttering video.

I views question.

Similar Messages

Maybe you are looking for