I w'd like to know if LabVIEW 6.0 Application Builder includes the daqdrv (for data acquisition) and serpdrv (for serial communication) support files by default.
Building an application to communicate to a device by serial port
Hi velou
The LabVIEW 6i Application Builder no longer requires daqdrv. Regardless of your Application Builder and LabVIEW version, you must always install the appropriate driver files on the target machine. For example, if your application communicates with a DAQ board and a GPIB board, then you must install NI-DAQ and NI-488.2 on your target machine. If you are using the VISA VI's for serial communication, than you have to install NI-VISA . If you are using the "old" serial VI's, than you have to include serpdrv separately.
Luca P.
Regards,
Luca
Similar Messages
-
I would like to know if labview can works with hp82335b interface
I would like to know if labview can works with hp82335b interface for instruments data aquisitions
Hi,
on following link: http://ftp.agilent.com/pub/mpusup/pc/old/hp_over.html
they say:
"The 82335 will not work under National Instruments Labview in any way, shape, or form. In general, it will not work on any product that doesn't specify that it does work.
There are no plans for any improvements to this product and no engineering resources on it."
In case this is true, you will go into trouble with
your card using LabVIEW.
Regards
wha -
I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?
Just create a new AppleID for your work.
As Allan suggested, items purchased on one iTunes account cannot be moved to the other account.
However, you can put items purchased on on account onto the other iPhone. -
i downloaded ios5.1.1 to my phone, but i dont like the new software. The face detection used in the camera jut isnt for me. So, i would like to know if there was a way to undo the update and go back to ios 5.0.1. My iphone is not jailbroken or unlocked.
The face detection used in the camera jut isnt for me.
Try a different camera app. Camera Plus is a good one and there are many others. -
I would like to know which app/software in MAC gives us the same feature that is provided by System Restore in Windows, and how does that work.
Time Machine is one such program, although it is a recursive backup program which offers limited archive capability, based on the capacity of the backup destination, and it requires you set it up before you start editing your files. Some programs are also Versions aware, which offers a kind of restore capability by file. Again needs to be setup before you start editing.
Just a for-your-info:
Mac is not an acronym, it is a nickname for Macintosh. -
I have had my old Iphone 5s replaced with a new one but I would like to know how to extract my old contacts from the iTunes backup? Please explain in basic english i am a beginner
Hey,
I think you will find that you have to have a debit/credit card stored on yur account regardless of whether your have iTunes Credit or want to purchase a free App. I don't know why, I assume its for ID verification or is part of the terms and conditions. I occasionally have to re-verify my credit card info even when just trying to run Update on one of my Apps or like I said downloading a free App.
If you need further clarification all you can do is contact iTunes Support:
https://expresslane.apple.com/ServiceOptionAction.action
Hope this helps. Andrew -
I'm french, my white Ipod4g 16gb has been stolen 2 days ago, I would like to know how to get it back thanks to the serial number! please
You can't.
Change your iTunes (Apple ID) password along with any other password that was stored in the iPod. If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number). If any passwords are associated with a bank or any other savings institution, contact them also and discuss approprate action with them.
The only real protection you have is with the personal information on the device rather than the physical device itself. This requires action before the device is lost/stolen. If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries. -
I have a Airport Time Capsule 2T, I would like to know if it is possible to backup all my apple divides (iMac, iPhone and iPad)?
The iMac can back up to the Time Capsule, but iOS devices like the iPhone and iPad back up to either iTunes on your Mac....or....to iCloud.
If the iPhone and iPad back up to iTunes on your Mac, then when the iMac backs up the iOS backups are sent to the Time Capsule as well. So, the iPhone and iPad back up indirectly to the Time Capsule.
The iPhone and iPad cannot back up directly to the Time Capsule.
For more information on iOS backups, see this Apple support document:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support -
I like to know the table name where all the Interface name ( Data Type and
Dear Friends,
I like to know the table name where all the Interface name ( Data Type and Message Type in IR ) is stored.
Thanks.Hi,
Please find the repository APIs in the SE24 class builder that can be used for accessing repository objects from the ABAP stack of SAP XI. Check CL_SRAPI* in the SE24 transactions for digging further.
location of interface objects
CL_SRAPI_DATA_TYPE---data type
CL_SRAPI_DATA_TYPE_ENH---data type enhancement
CL_SRAPI_FAULT_MESSAEG_TYPE--fault message type
CL_SRAPI_MESSAGE_TYPE--message type
CL_SRAPI_INTEGRATION_SCENARIO--integration scenario
have a look at the table SXMSPMAST, SXMSCLUP & SXMSCLUR
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fbe7b8e-0a01-0010-b69b-b7e717378f22#search=%22SXMSPMAST%20%2B%20XI%22
That document has references to lot of tables maybe it can be of use to u.
Look at the below thread for SXMB_MONI tables and Function module:
In Which Database Table the Messages are Stored in XI
Message Monitoring --> corresponding tables?
Edited by: Dharamveer Gaur on Oct 8, 2008 10:40 AM -
I would like to know if there are any classes in using the iphone in the South Bay area (around Torrance) of Los Angeles County?
Apple stores have classes, look online for the Apple store closest to you & their schedules. Here's Apple's free iPhone app to do so right on your phone:
http://itunes.apple.com/us/app/apple-store/id375380948?mt=8 -
Do you know any program for 3d modeling and rendering for Mac?
Do you know any program for 3d modeling and rendering for Mac?
I use MegaPov for 3D-rendering. MegaPov is a Mac version of the free PovRay, a photrealistic renderer. It is perfect, if you like to write animation scripts to program elaborate animations and shading.
If you prefer a GUI to a scripting language you may consider Blender; it is also free.
Rather expensive, but with an elaborate GUI are Maya and Cinema 4D; both are available for the mac. -
I migrated everything from my Snow Leopard iMac to my new Lion iMac and now when I launch anything in CS5 like Photoshop the Adobe Manager pops up and wants my serial numbers or to start a trial version. I don't have my CS5 serial numbers but wouldn't they migrate over with everything else?
but wouldn't they migrate over with everything else?
Are these PowerPC apps that ran on Rosetta with Snow Leopared?
If so you need to read these articles...
Lion upgrade questions and answers: Apple Support Communities
What applications are not compatible with Mac OS X 10.7 "Lion"? What upgrade or substitute options are available for common incompatible applications? @ EveryMac.com -
34970A Data Acquisition Unit driver for LabView 6.0
Is there a LabView 6.0 instrument driver available for the Agilent 34970A Data Acquisition Unit?
Thanks!
Paul
Solved!
Go to Solution.Here you go.
It's actually in LV5.11 as we are still using LV 5.11 in production.
Attachments:
hp34970a.zip 1827 KB -
I have an iPhone and sync it with iTunes. Just got my wife an iPhone also. Is it possible to have 2 accounts in iTunes 1 for my wife and 1 for myself? I don't want to mess up things like contacts on either phone.
The best is to create another Windows user profile(additional User Account) where each one of you can manage your own account, library, playlist Apps, Contacts etc,
Refer to this article:
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495 -
I use Preview to edit photos, and would like to know if there are any updates to this program in the works. It seems Apple is constantly updating its software, except for Preview. I find it crashes all too often, and also takes forever to "catch up" with me (as in spinning beachball of death) when I'm editing a lrge amount of photos. Yes, I know I should be using Photoshop or somesuch, but it's just too **** confusing, and I don't have the time to figure it out. Thanks!!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.
Maybe you are looking for
-
P35 Neo-FI memory problem with 4 ram sticks
Hi, I have a problem to get my 4 ram sticks to work. a1 and a2 works but soon as i put another ram in to motherboard example to b1 or b2 it wont post anything on the screen. I know that my 4 rams works ok and i dont have any problem with them. I have
-
Need help with Apple Display 20" going black
There support and mac comrades, I was wondering if anyone has this following problem and had it fixed. I am currently using double 20" Apple display on a Mac Pro, and suddenly one of the screen start to turn black and get back to normal after few sec
-
Is there a quick way to change/replace the font of an illustrator document in inDesign or any other app? Thanks
-
If I open Pages there comes a notification what says that I need to intsal Pages again. But hee is the problem, I don't know how I'm supposted to do it because I don't have a CD with iLife. I got it with my iMac. So how can I get Pages back to work?
-
Formula %A does not deliver right result for some ranges
Dear experts, I have a formula of percentage which should show key figure in %. So, I use formula: KF1 %A KF2. However, I found that in some ranges the result will be shown as 0 (if it falls in range -0.4 to 0.4) data example: KF1 : 3 KF2 : 500 Formu