I wanna change the tab name in tcode ie02 :) i'll give u points !!!

Hi abapers,
In screen ie01 i want to change the tab name, like instead of general, i want to put some other.
If it is possible, do help me.
I ensure u for giving ur share of point.
Regards,
[email protected]

Hi Pradeep
I am giving here the names of the exits for this transaction ie01
You will have to customize one of the exits according to your req.
Exit Name Description
IEQM0001 Add. checks for equip. installation at functional locations
IEQM0002 Additional checks for definition of equipment hierarchies
IEQM0003 Additional checks before equipment update
IEQM0004 Object is allowed for contract partner (Order->MaintCont.)
IEQM0005 Object allowed for SD contract (MaintContract->MaintCont.)
IEQM0006 Object allowed for SD contract (Maintain maintenance cont.)
IEQM0007 Check/change manufacturer field in equipment master
Thanks & regards
Ravish Garg
REMEBER REWARD POINTS IS THE BEST WAY TO SAY THANK YOU

Similar Messages

HT5840 Can you change the tab name? If can, how?

Can you change a tab name?

I believe the Tab is just named according to the name of the folder you are in. I don't think there's any way to change that.

How to change the Tab name for a custom field added in IC Winclient

I have successfully added a field using eewb and it is appearing on my transaction in CIC0 but it is on a tab that says Customer Fields. In EEWB a BADI called ZEEW_CUSTOMER_H01 was generated and it has a methods called CRM_CUSTOMER_H_SET_TITLE. It indicates you should be able to use this to rename the tab but the method is empty. Anyone have an example of the code you pass in to rename the tab screen. Thanks, Lisa

>>and how will it effect in the report?
You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
~Suresh

How to change the library name..?

Hello guys
i wanna change the library name.
can any help me pls..?
Abdetu..

open your .pll file in forms builder and use save as to change the name, and regenerate the .plx from the new .pll and attach the .pll to your forms.
You probably need to reattach to all the forms that uses the old library if you plan to remove it completely.
Tony

Changing the tab heading

hi mm gurus
how we can change the tab headings in PR, PO in customizing.
give me the path
thanks
subbu

If the names defined in the system do not correspond with your companyu2019s terminology, you can assign your own names to purchasing documents. However, you cannot change the names of sales documents.
You can change by Administration -> System Initialization -> Document Numbering. -> Change Name
Enter your own specific names for:
■      Purchase orders
■      Goods receipt POs
■      Goods returns
■      AP invoices
■      Purchasing credit memos

How can I change the "Full Name" for my iCloud account?

Hello,
At some point in the past, iCloud started identifying me as someone else when I send emails. This incorrect name appears to be the "Full Name" setting of the email account, but when modifying the properties for the email account in Mail the field for modifying the "Full Name" setting is disabled, not allowing me to make any changes.
Where is the correct place to change the "Full Name" setting for my iCloud account?
Thanks,
- Josh
<Email Edited By Host>

I believe it can be changed by going to https://appleid.apple.com/, click Manage your Apple ID, sign in with your iCloud ID, select "Name, ID and Email Addresses", then click "Edit" next to the name listed under "Your Name" and change it as desired.
Also, if you are trying to change the sender name for your iCloud email account, you'll want to go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail (Command-Q) on your Mac and re-open it. Your new From name should now appear in the drop-down list when you compose a new email.
(The image was removed in your post above because it showed your iCloud email address.)

How can i change the screen name in my icould account?

my Apple ID used to have my Dad's name because of the billing issues.. now is changed again to have my name, but i keep seeing that my account on icloud.com still says my dad's name, so if i try to send an email through there it says my dad's name and my email address instead of my name...
how can i change the name that appears linked to my icloud account? (note that as i already sayd my Apple ID has my name now, i jsut want to know why is not my name in my icloud account?)
thank you,

I believe it can be changed by going to https://appleid.apple.com/, click Manage your Apple ID, sign in with your iCloud ID, select "Name, ID and Email Addresses", then click "Edit" next to the name listed under "Your Name" and change it as desired.
Also, if you are trying to change the sender name for your iCloud email account, you'll want to go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail (Command-Q) on your Mac and re-open it. Your new From name should now appear in the drop-down list when you compose a new email.
(The image was removed in your post above because it showed your iCloud email address.)

Finder changes the file name in Save/Save As dialogue box

Whenever I save or save as a file, the dialogue box opens, but when I make the file list active when using a mouse, the file name I click to changes the file name I am saving. I simply want to activate the file list window so I can find the right folder. For example if I am looking for a folder called "Receipts" I want to be able to click on the file list window to activate it and then type the first 2 letters of the folder-- "re" and then save the file in that folder. The finder keeps changing the name of the current file whenever I click on one of the "greyed-out" file names? This doesn't make sense unless of course I want to replace that file.
Is there a shortcut that makes the file list window in the dialogue box active while in the SAVE/SAVE AS dialogue box??

Yes, this example of horrible UI design has been a problem since "Panther". It illustrates what happens when you try to copy UI behaviour from another OS, do it poorly, and end up with a mess. In 10.3 and 10.4, the combination of the renaming behaviour with the default "replace" selection in the resulting save can result in data loss.
Compared to the old Mac OS where a tab would flip the focus between the text field for the file name and the file browser, the current behaviour either doesn't allow enough keyboard access to controls, or with "full access" enabled, too many to cycle through easily. The inability to switch focus to the file browser using the mouse (depending on the view) is a horrible productivity loss. Having to recheck the filename before saving is a horrible productivity loss. Since there is no "undo" for the renaming in most files, having to retype the name is again, a horrible productivity loss.
If they had done it right (a simple change, like requiring a modifier to rename), users would probably welcome the "rename" feature as a useful addition. Instead, it has the feel of something a junior Windows-trained programmer slipped in past their supervisor.
In short, I am not aware of any workaround or hack to avoid this "renaming" behaviour. I doubt it will do any good since people have been doing so since "Panther", but you could try submitting feedback:
http://www.apple.com/feedback/macosx.html

Changing the file name dynamicallly in file Adapter

Hi i want to change the file name directly from Java Mapping in the file adapter
for this i have written this code
DynamicConfiguration dynamicConfiguration = (DynamicConfiguration)map.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
 DynamicConfigurationKey keyFile = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
 DynamicConfigurationKey keyDir = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
 dynamicConfiguration.put(keyFile,fileName);
 dynamicConfiguration.put(keyDir,outputpath);
but it gives a null pointer exception at dynamicConfiguration.put(keyFile,fileName);
please suggest.
regards
Nilesh Taunk.

Hi Nilesh,
If your requirement is to create , the file name dynamically for your receiver file adapter, you can do so using your FILE ADAPTER CONFIGURATION itself, and need not go for any JAVA Mappping / Java Code at all.
The dynamic filename generation concept is as follows.
In your filename field in the receiver file adapter, just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
Also, in your FILE Adapter under the option FILE CREATION MODE, you have options like,
1.Add Counter,
2. Append
3. Create
4. Add Time Stamp
If you have any clarifications on this approach, do get back.
Regards,
Bhavesh

Changing the network name on my wireless router?

I bought my linksys router a few months ago and did all the setup stuff that day, including changing the network name from the default. I want to change the name to something different, but when I went to the setup address, there was no box in which to put the new network name [I was on the Basic Wireless Settings Tab in the Wireless section]. Help please?
Solved!
Go to Solution.

What is the model number of the router? Access your admin pages again and select wireless tab and then select the MANUAL button. There you will find what you seek (SSID).
Message Edited by sabretooth on 01-25-2010 10:32 PM

How to change the column name as bold in adf table

Hi,
How can I change the column name with bolder style and blue colour in adf Table?
I changed the color and font weight in af:column properties, but its effecting the data in that column but not with the column Header Text property.(i have given column name in header text).
can any one have any idea how to do this?
and I have taken panel tabbed layout and in that i'm displaying this table.
but this table has scroll beneath of it to show all columns.
but i want to display all columns (for this, page should have scroll at the bottom side).
how can I achieve this???

Hi,
Add the following CSS Code to the custom skin css file that is to be created as per the suggestions above.
*af|column::column-header-cell{*
color:Blue;
font-weight:bold;
This would ensure that all the table column headers are blue in color and bolder font style through-out the application.
By the way, what version of JDeveloper are you using?
Thanks,
Navaneeth

To change the printer name while printing the invoice

Hi,
I have a requirement like if there is already an entry in NAST table with o/p type ZURD and printer name USJC-PM03,then an error message has to be displayed like 'This Output already printed in USJC-PM03,Change the printer name 'USJC-PM03' to 'LOCL' and then print' on the vf03 screen.
But even if I change the printer name from 'USJC-PM03' to 'LOCL',it is showing the same error message.This message should not be shown.
I have used the following code in the program.
lf_formname = tnapr-sform.
determine print data
PERFORM set_print_data_to_read USING    lf_formname
                                 CHANGING ls_print_data_to_read
                                 cf_retcode.
IF cf_retcode = 0.
select print data
    PERFORM get_data USING    ls_print_data_to_read
                     CHANGING ls_addr_key
                              ls_dlv-land
                              ls_bil_invoice
                              cf_retcode.
ENDIF.
IF sy-tcode = C_VF03.
    SELECT SINGLE * FROM tnapr WHERE kschl = 'ZURD'
                                   AND nacha = 1
                                   AND kappl = 'V3'.
    SELECT count(*)
    FROM NAST
    INTO lv_count
    WHERE objky = ls_bil_invoice-hd_gen-bil_number
    AND    kappl = c_v3
    AND    kschl = c_ZURD
    AND   ldest = c_PM03.
    IF LV_COUNT GE 1.
      Message e000(zup) with text-001 text-002 text-003.
    ELSE.
determine smartform function module for invoice
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
             EXPORTING formname           = lf_formname
                variant            = ' '
                direct_call        = ' '
             IMPORTING fm_name            = lf_fm_name
             EXCEPTIONS no_form            = 1
                        no_function_module = 2
                        OTHERS             = 3.
call smartform invoice
          CALL FUNCTION lf_fm_name
               EXPORTING
                          archive_index        = toa_dara
                          archive_parameters   = arc_params
                          control_parameters   = ls_control_param
                mail_appl_obj        =
                          mail_recipient       = ls_recipient
                          mail_sender          = ls_sender
                          output_options       = ls_composer_param
                          user_settings        = space
                          is_bil_invoice       = ls_bil_invoice
                          is_nast              = nast
                          is_repeat            = repeat
     importing document_output_info =
*Uncomented the line to get the spool id or OTF formatted data -
*NY047532
               IMPORTING
                      job_output_info      = w_job
NY047532
                job_output_options   =
               EXCEPTIONS formatting_error     = 1
                          internal_error       = 2
                          send_error           = 3
                          user_canceled        = 4
                          OTHERS               = 5.
      ENDIF.
    ENDIF.
When should be done for the error message not to be shown when the printer name is 'LOCL'.

Hi,
Here my requirement is first the user has to check the nast table if there is any entry with o/p type ZURD and printer 'USJC-PM03' .If there is an entry then an error message 'This Output already printed in USJC-PM03,Change the printer name 'USJC-PM03' to 'LOCL' and then print' has to be displayed.
Then if i close this popup window which is showing error message and change the printer name from 'USJC-PM03' to 'LOCL', and click on execute button,the printer name is not getting changed and still the error message is getting displayed.How to remove this error message?

Really changing the short name.

Is there an actual method for changing the short name? The methods I've seen involve basically making a new user, just with everything transferred from the old user.
What I really want to do is to change the short name of the admin user on my server. I've used my name for it and I want my name to be a real user, not an admin. You can't take away the admin rights or change the name.
So I installed Tiger server (and it updated to 10.4.8) and then went through the setup process. The admin user name I used was my user name (this was the mistake), now I want my name back.
I went through this with Jaguar server, and my solution then was to reformat and reinstall. I think I'm going to have to do the same again.
PowerBook 12" Mac OS X (10.4.8)

Hello,
If you just want to change the short username in WGM turn on the inspector. (Open preferences and check the "Show "All Records" tab and inspector") Once you click "ok" you will see a bullseye. Click on it select users from the drop down menu. Click on the user you wish to edit click on "RecordName" and change the short username. Once done click save.
If you need to change the short username of a user who is in the Netinfo DB such as local users. Open the Netinfo Manager, authenticate, click users, select the user you wish to edit and change the short username. You should also correct the home folder path. Save your changes and your done.
Hope this helps!
- Barrett

How to change the table name

hi
instead of copying and renaming
is there any other way to change the ztable name .
I have wrong named the table and activated now i need to
change the table table from ztest to zvk01
thanks

these r the steps to change table name ..
goto se11 tcode.
give ur oldtable.
goto top of the se11 ->goto dictionary objects ->copy->
give from table name to table name .
And the copy of ur table will be new table name ..
And to delete oldtable name.
goto se80->goto ur package ->select datadictionary ->select the old table name ->rt click ->delete.
I think its some what useful.

Change the tab color

Hi,
i'm unable to change the tab color of panelTabbed item, i've tried the following in a css sheet:
af|panelTabbed::tab:selected {
font-style:italic;
background-image: url("../Images/section_label_body.jpg");
border-bottom-color: red;
border-color: Fuchsia ;
border-top-color: Green;
outline-color: Yellow;
color: Aqua;
font style and background image seems to work (which tells me that i have the right skin selector) but non of the rest is changing the color of the tab.
does anyone knows how to do that???????
Note that when i say tab i mean the tabs header, where you click on it and it opens the tab body.
Thanks,
Alain.

Hi,
best tip I can give is:
Disable content compression for the generated HTML output of the ADF Faces page. This will change the style class names from being obfuscated, which we use to reduce the download size of pages. Astyle class that shows as .x3s at runtime might show as af_inputText_content after this. The af_inputText_content then is waht you need to discover and translate into a valid skin selector.
<context-param>
<param-name>org.apache.myfaces.trinidad.DISABLE_CONTENT_COMPRESSION</param-name>
<param-value>true</param-value>
</context-param>
Run the ADF Faces application you want to discover the skin selector for in FF with Firebug and the WebDeveloper plugin installed.
Select the tab and look at the skin selectors displayed as the style class properties. If you find someting like af_panelTabbed_tab then this translates to af|panelTabbed::tab. If you see something like .p_selected then this means its a pseudo class that needs to be appended to the selector like af|panelTabbed::tab:selected.
Use Firebug in inspect mode and select the tab. This shows you all the selectors as style classes in the generated HTML output. Open the Web Developer plugin to edit CSS on the page. Then add the style class selector you found, e.g. .af_panelTabbed_tab (note the leading dot ".") or with a curly brace
.af_panelTabbed_tab{ ... }
Within the cury braces, type the CSS you want to set and see how it behaves. You may have to play a bit to exactly find the style class and css you want, but assuming that the follwing works
.af_panelTabbed_tab .p_selected{background-color:red}
then this translates to teh following skin selection to be copied to the CSS skin file
af|panelTabbed::tab:selected{background-color:red}
Note that this backward translation from style class to skin selector needs some patience. However, experience proves to be the best when cooking and so it does for skinning.
Hope this helps
Frank

I wanna change the tab name in tcode ie02 :) i'll give u points !!!

Similar Messages

Maybe you are looking for