I wanna roll back to iOS5 the easy way

How do we roll back to iOS5, from 5.0.1, that restore is PIA, any easy way? If there is no "easy way" then Apple should find one, it helps when ever their updated OS creates more issues, it should give an option to roll back to previous OS, as easily it  a 50mb update installs, using just wifi, that's all we want..

You can't. You can't roll back by any Apple-approved method. And if you did chances are it wouldn't fix whatever your problem is. If you have issues with 5.0.1 fix them as most others have. There's nothing wrong with the release, only with your phone.

Similar Messages

  • How do I roll back to ios5

    With the ios6 WiFi debacle, I just want to not have a useless iPad.  Can anyone tell me how to roll back to ios5?

    Hi,
    You mentioned that apple dont officially support this, is there a way to do this unoficially as IOS6 is a joke, apple maps is useless, all my music is gone etc. Im currently considering moving away from apple because of this release.
    Cheers
    Mick

  • PLZ helpppppppppppppppppppppppp want to roll back "active" of the recovery partition...

    Hi,
    I need serious help,,,,,,any help is appreciated :
    --- I believed my second hard drive is burnt , but it was not ( not able to access it, it was because i had changed the workgroup in NTFS),
    --- at this stage my windows 7 would boot normally , but like a new user, no access to previous files
    --- so tried to do restore,    F11  showed there were no previous saving for restore
    --- tried to do recovery , F11  showed that "restore" botton is gray/ inactive
    --- someone on internet suggested to make the recovery partition , "active", so i did it through disk management
    --- then when windows boot up, it went directly to previous recovery page with inactive botton,, i can not access my previous windows , i can not boot up to windows again
    --- so now it boots up and goes to useless recovery page
    ---  through bios activated "HP Quick web" , and playing with photo viewer in quickweb i noticed all my files on the "maybe burnt drive"  are all there!!!!    and i can view them,,,,,,,   ooops!!! my whole problem was changing windows group!!
    ---   so if i can just boot to previous windows , then i can change the group and access the files...but
    --- now i cant go out of recovery page,,,,, now that it is "active partition" everytime i turn on computer is JUST goes to recovery page screen (which is inactive),,,,,,,,,,,,,,,,,,,,,,,,,,
    --- how can i roll back, or inactive the recovery partition and use my drive "C" previous partition as the only active one
    I dont have recovery CD (I will get it tomorrow, i ordered it by HP, 30 bucks!  phewww),,,,,,,,,
     i am panicked any help would be deeply appreciated.........................................................
    HP Pavillion DV-7 4069 
    Windows 7  Home Premium

    Hi,
    If you don't already have one, use another PC to create a Windows 7 Recovery CD.  Download the relevant ISO from the links below.
    Windows 7 32bit
    Windows 7 64bit
    You should use an application such as ImgBurn to burn the ISO to a CD.  Once created, or if you already have this, insert the CD and restart to boot from it.  Select the Repair option.
    Select the 'Repair your Computer' option and follow Option 2 in the guide on the link below to run Start-up Repair – you may need to run this 2 or 3 times.
    http://www.sevenforums.com/tutorials/668-system-recovery-options.html
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Intallation is being rolled back post deploying the SP1

    Trying to deploy SP1 across all win 7 systems. It's being successfully installed when PCs are not in domain but for Domain joined system it's being rolled back post initial installation and reboot. Please help me do get rid of this issue.

    Hello Tech Olive,
    What do you mean of the sentence ‘for Domain joined system it's being rolled back post initial installation and reboot’? the domain-joined systems keep roll back to install the Windows 7 service package 1?
    How do you deploy the Windows 7 service package 1?
    Do you receive any error messages in the domain-joined Windows 7?
    Please take the following steps for troubleshooting:
    1. Check if we can install the Service Package manually.
    2. As you mentioned that only domain-joined computer can't normally install the Windows 7 service package 1. I think it is related to domain setting. Please confirm with the domain administrator to check if there are group policy or setting to block the
    installation
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • What is the easier way to turn voice controller off?

    what is the easier way to turn voice controller off?

    you can turn of the voice dial but as far as i know you can not turn off the voice controller
    if you want to turn of the voice dial just go to setting then to general after that to passcode and turn off the voice dial option

  • Regarding roll back and reassign the value.

    hi all,
    i am using forms6i.
    Re: how to avoid the form's message situation
    as we discussed my process has to happen like this. since it is a new topic so i have raised new thread.
    what i want to do is based on the input values(base table values) i have to call one procedure, the procedure returned value i have to assign to one of my database field and one new record should go into other table.
    so what i am doing is at the key-commit trigger i have written a procedure inside that i am calling a procedure which results in one value which i have to assigned to my blocks item. and one record to the table
    my code in key commit trigger is something like
    go_block('block name');
    first_record;
    based on the forms parameter call procedure
    if procedure returns error then rollback otherwise assign value to base table item and one record to other table so
    job_proc();
    :block.item:= output ;
    insert into job_table() values();
    if system.last_record = 'TRUE' then
    exit
    else
    next_record;
    end loop;now senario is like if i am in fifth record four record processed as i explained before. in fifth record if i am getting error means
    all four records value and insert statement should be reassined and rolled back.
    so i have written like
    exception when others then
    forms_ddl('rollback');
    go_block(block name);
    go_record(system.current_record);
    :block.item := null;
    if :system.trigger_record = 1 then
    exit;
    else
    previous_record;
    end if;
    end loop;is this is the way to rollback or is there any better way?
    please advise.
    Thanks..

    Hi,
    Check these files on rollback and commit:
    Transactional Behavior of an Integration Process:
    http://help.sap.com/saphelp_nw04s/helpdata/en/45/058023846b2460e10000000a1553f7/frameset.htm
    Commit Handling:
    http://help.sap.com/saphelp_nw04s/helpdata/en/fa/814d3ccd6fba74e10000000a114084/frameset.htm
    Rollback:
    http://help.sap.com/saphelp_nw70/helpdata/en/23/5f5fd653b6f64d9bb0b468a8689838/frameset.htm
    Regards,
    Subhasha

  • Instance roll back while validating the XML message using Mediator

    Hi all,
    I am facing issue when calling a mediator process in validating the XML before invoking the target application
    Below is the error for the instance.
    com.collaxa.cube.engine.EngineException">
    Global retry rollback fault thrown.
    The current JTA transaction is aborting due to an user rollback fault being thrown. The upstream component should retry in a new JTA transaction upon catching this fault.
    This exception was caused by a global retry fault being thrown from downstream component. The user had directed the BPEL engine to roll back the current JTA transaction and retry within new JTA transactions for the specified number of times and retry interval.
    There is no action recommended.
    -<stack>
    <f>
    com.collaxa.cube.ws.WSInvocationManager.invoke#334
    </f>
    <f>
    com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke#1070
    </f>
    <f>
    com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke#584
    </f>
    <f>
    com.collaxa.cube.engine.ext.common.InvokeHandler.handle#132
    </f>
    <f>
    com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements#74
    </f>
    <f>
    com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform#166
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine.performActivity#2687
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine._handleWorkItem#1190
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine.handleWorkItem#1093
    </f>
    <f>
    com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal#76
    </f>
    <f>
    com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage#218
    </f>
    <f>
    com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory#297
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine.endRequest#4609
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine.endRequest#4540
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine._createAndInvoke#713
    </f>
    <f>
    com.collaxa.cube.engine.CubeEngine.createAndInvoke#560
    </f>
    <f>
    </f>
    </stack>
    </exception>
    -<root class="oracle.fabric.common.FabricInvocationException">
    java.lang.NullPointerException
    -<stack>
    <f>
    oracle.tip.mediator.serviceEngine.MediatorServiceEngine.process#1006
    </f>
    <f>
    oracle.tip.mediator.serviceEngine.MediatorServiceEngine.post#663
    </f>
    <f>
    oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost#142
    </f>
    <f>
    oracle.integration.platform.blocks.mesh.MessageRouter.post#197
    </f>
    <f>
    oracle.integration.platform.blocks.mesh.MeshImpl.post#215
    </f>
    <f>
    sun.reflect.GeneratedMethodAccessor2091.invoke
    </f>
    <f>
    sun.reflect.DelegatingMethodAccessorImpl.invoke#25
    </f>
    <f>
    java.lang.reflect.Method.invoke#597
    </f>
    <f>
    org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection#307
    </f>
    <f>
    org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint#182
    </f>
    <f>
    org.springframework.aop.framework.ReflectiveMethodInvocation.proceed#149
    </f>
    <f>
    oracle.integration.platform.metrics.PhaseEventAspect.invoke#59
    </f>
    <f>
    org.springframework.aop.framework.ReflectiveMethodInvocation.proceed#171
    </f>
    <f>
    org.springframework.aop.framework.JdkDynamicAopProxy.invoke#204
    </f>
    <f>
    $Proxy341.post
    </f>
    <f>
    oracle.integration.platform.blocks.local.LocalInvocationProcessor.post#211
    </f>
    <f>
    </f>
    </stack>
    {code}
    I have some knowledge in transaction but this no where in my picture. In bpel process no where i mention transaction is* required* for the mediator component and my mediator is one way asyn process.
    Also i defined catch all activity in my bpel and if some thing happen it suppose to move to catch all block but it didn't happen here.
    I look forward from some one to help me in resolving in this.
    Appreciate some one help here.
    Regards,
    Tarak.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    Thanks for the prompt help. Is there any other way instead of removing the DTD line ?. Because the xml is coming as a string and removing the dtd and then adding it will unneccesary hamper performance. Do you any other way in which even though I don't remove the line I get the output without removing the dtd line ?.
    thanks and regards,
    Sachin

  • Should Verizon provide a roll back option from the gingerbread update?

    Simple and straightforward. Do you believe That verizon should provide a rollback option from the gingerbread update?
    My vote would be Yes.
    Here is some reasons why
    1 First and foremost the update should not have been forced.
    2 When making significant changes to the operating system like gingerbread has Motorola should have the decency to contact Droid owners And inform them of the changes they attend to make.
    3 The update wasn't really necessary.
    4 ethically I believe that verizon should provide a roll back option.
    5 regardless of what the fine print says in the contract just because something is legal to do doesn't mean it is ethical to do.

    Talk about beating a dead horse.......
    I was President of the GB Sux Club after it came out. At least a dozen bugs and glitches were created after I installed it.
    But, you know what?
    In the weeks that have followed, as apps have been updating (you should check the Market for available updates if you don't have them set to auto), and I check daily, something interesting has happened.
    Most of the bugs and glitches have mysteriously gone away.
    Is/was GB the "problem"? It wasn't perfect, but it wasn't the problem.
    After GB, my phone did and does bizarre things from time to time that makes me wonder how they could be caused by a conflict the O.S. is having with a 3rd party app.
    The 3G dropping issue notwithstanding.
    There are some issues, yes. But, I contend apps are the main "problem".
    Can going back to Froyo (if it were possible) do more harm than good, if 3rd party apps are updated for GB? That's above my pay grade.
    I did a reset after GB and it solved nothing. I defiantly refused to un-install all apps, or reboot in Safe Mode.
    I did NOTHING but let the developers update their apps and right now, my phone is largely bug and glitch free, again.
    In politics, there was the saying, "It's the economy, stupid". In Android, "It's the apps, stupid". (Not speaking to anyone in this forum).
    Yes, the evil empire has it right when it comes to the stranglehold they have on which apps are allowed on their tiny iphones.
    But, you know what? If, OEMs did the same, the Android experience wouldn't be the frustrating situation it is at times, ESPECIALLY after EACH update.
    In my opinion.

  • HT201210 I would like to roll back to IOS5 from IOS 6. Please help.

    I would like to roll back to IOS  5 from IOS 6. Please help.
    Thanks
    Madhu

    I would like to downgrade too. Can not pick my Yahoo and Gmail on the mail App.
    Also Apps keep crashing and iPad 2 just keep cycling when tried to move some icons around.
    The interesting thing is that maps does not know about Heathrow and Gatwick airports but give me taxi offices that goes there. How nice. 

  • Backing up music - the easy guide to the best way

    When getting an ipod or starting to build up an iTunes library, it is always best to back-up your music. DVD is better for larger librarys but CD is also a more lengthy option.
    *DVD Burner - If you have a DVD burner, then your library can be stored on much less disks (6 700mb disks to 1 DVD disk). first you need to open up your DVD burning software. then go through into data disk. on most programs there is a button that allows you to browse your files. if you have used iTunes to put your music on your computer, then your music will be 'my music > iTunes > iTunes Music'. then add as much music as the disk can hold (usually around 4.2GB - 4.4GB and the program should say when it is full). keep doing this (making a note of the last artist to be burned) until all of your music is onto disks. Then even if your ipod needs restoring or your computer hard drive needs formatting, you will be able to add all of your music quicker than importing again.
    *CD Burner - Doing a lot of music takes more time this way but can be done. start the same as above by going into your burner program and selecting around 700mb of music (it should say if it is full) and burning disk by disk your whole library being careful not to overlap on artists. when done you can have around 90-100 tracks on each disk making much quicker transfer to your computer.
    This guide should help most people in need of assistance on the best way to back-up your library.

    Or this.
    Buegie, "Best to Save iTunes Library Externally" #1, 04:39pm Sep 21, 2005 CDT

  • Image objects following each other--the easy way?

    I have a series of images that scroll up the screen. There are 35 or so of them and they follow each other like a filmstrip. I have been creating one layer and copying one motion path for each, staggering them in the timeline. This works great, but it's a drag if I decide to change the timing. I then have to go to each one and move it individually.
    Is there an easier way?

    well if your images are a fixed size, it should be too hard to work out the offset for each. But you can move the parent group around as you arrange your images, and then move it back to its start position when you're ready to roll (pun intended).
    I liked specialcases solution though, seems tricky to set up if you're unfamilar with the replicator but powerful. And once set up it woul dbe easy to replace the images at any later stage.
    adam

  • Logging the easy way, I thought.

    I recently had to switch back to DV quality on my JVC GR-HD1 for a job, and had only recenlty learned how to make HD work right. Now I am stuck in the same position I was when I figured that out, except that I know about the setups.
    To be a little less confusing, I need to know if anyone knows what the settings are for just the regular DV settings, and what those setings are. I am using Final Cut Pro 6.0 on OSX 10.4.11.
    Thank you all for at least looking,
    AVest.

    I tried that.
    That is how I figured out how to do HD in the first place. But that is not exacly my problem.
    I do not remember the settings for GR-HD1 and now, since I have stopped using HD for a time, I really need to know.
    I have tried all of the easy setups, and most of the common sense regular setups. It used to work with the generic default that Final Cut Pro started with. I had thought I had passed that several times during my testing. So now I need help with the specifics. I noticed several other threads with just about the same problem as I, and none of them were resolved with an answer in the forum.
    I get that
    "Unable to find external devices:
    Apple FireWire NTSC "(or HDV/HD depending on the respective test run) and then the resolution.
    And I get that for ALL presets I try.
    Thanks for trying, please do so again,
    AVest.

  • Xperia Transfer - The easy way of moving your data from an old phone to your new Xperia

    Transferring your information from an old phone to your new Xperia have never been easier.
    With Xperia Transfer this process becomes much more convenient and most important, less hassle for you.
    And we think its important that this process becomes as easy and simple as possible, especially when you got lot of important data stored such as messages, contacts, music collections, albums of photos etc. That you would like to move to your new Xperia phone.
    So if you had a Sony Ericsson/Sony Android phone, other Android phone, iPhone or Blackberry and just got yourself a new Xperia device check out Xperia Transfer to start transferring your information!
    Xperia Transfer is available for PC, Mac and now also via Mobile.
    Show me how!
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

    If you backup with iTunes and you restored from the backup and the data are gone, then there is no where to retrieve them from unless you have another backup that contains those data.
    Launch iTunes on the computer and go to iTunes>Preferences>Devices. You will see a window with all of your backups listed in it.
    If you see a recent backup that you are certain contains the data that you need, recover deleted data from iPhone backup.
    If your note is gone from iCloud.com there is only a few ways to possibly recover it.
    The first things I would check is a iCloud Backup, a iTunes Backup, or a 3rd party email that may have contained the note. To restore from a iCloud or iTunes backup follow this link. This article explains how to restore a device from either back up.
    Note if you have backed up since the note went missing, you will not have the note on the backup. Make sure you do not back up if trying to restore from a back up as this will back up the content without the note.
    To get to the "Set up assistant" on an iOS device, you must go to Settings>General>Reset>Erase All Content and Settings. Once the phone restarts, you will be at the "Set up Assistant"

  • Clearing Duplicates the Easy Way

    Due to a rookie consolidation move, I've got duplicates of most of my music in my iTunes Music Folder--all in the same file. The duplicates I'd like to get rid of all have a "1" tacked on to them, like this:
    03 She's Lost Control.mp3 (original)
    03 She's Lost Control 1.mp3 (duplicate)
    I'd like to clear up space by removing all of those "1" duplicates, but I've got a ton of music to go through and select. What's the easiest way to select and delete duplicates?

    Several ways to Clean Up Your Library by Removing "!" or ‘dead links’ within iTunes:
    If you move, edit, delete or otherwise change a music file listed in the iTunes Library with a program or tool other than iTunes, you may end up with a "!" in front of the song name. iTunes does not keep track of music file changes made outside of iTunes.
    http://discussions.apple.com/message.jspa?messageID=818692#818692
    http://discussions.apple.com/message.jspa?messageID=607582
    EASIER:
    Download this: http://ottodestruct.com/iTunes/RemoveDeadTracks.txt
    Rename it to RemoveDeadTracks.js.
    Run iTunes.
    While iTunes is running, double click RemoveDeadTracks.js to run the script.
    It will remove all the exclamation marked tracks.
    One step, no fuss, no muss.
    Then, give Otto42 a big 'Thanks' for this one.

  • What is the easier way to edit a captured slide?

    I have created a demonstration animation and there are several slides that need a little graphics editing.
    So far, I have not found a way to automate the process of editing slides.
    The only method I can determine is by selecting "Copy Background", then opening a graphics editor, pasting to a new window, edit accordingly, save the edited graphic background, import into the slide.
    Isn't there anyway to edit inline?.. meaning, the background is automatically sent to your choosen graphics editor, you edit the graphic, click save/exit, and the graphics background is automatically updated. That is how Captivate 4's competitors do it.

    Hi Shawn
    It really depends on what exactly you need to do. For example, if all you want is an easy way to blot out some words, use a Highlight Box object at zero percent transparency. Then merge it into the background. Or maybe you need an image added in. Add the image separately and merge it.
    Last week we needed to render an option button as unselected. In that case I just right-clicked and opened in Microsoft Paint. Duplicated another and overlaid the errant one. Closed and saved. Total update time from start to finish was less than two minutes.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

Maybe you are looking for