I want a Camera Class and rotation of camera help me plz

i want a camera class also want to rotate the camera around a fixed point.
the camera should rotate around the point.

You will need to return it to Australia. Warranty is not international.
Pete

Similar Messages

  • Tap picture in Photos App and rotate - issue / Pls help

    Hello all,
    Subject: iPhone 3Gs / 4.0.1
    Application: Photos App (default Apple application)
    Issue: tapping landscape pictures with phone in vertical position and rotate them goes on black screen
    Description:
    I am with iphone in normal (vertical position) and i go to photos app in order to scroll some pictures that were taken in landscape position.
    Everything is normal. I double tap it in order to zoom it.
    I rotate the phone in landscape position and the screen goes BLACK.
    I rotate it in portrait mode and picture is back on screen.
    Question: where is the problem ?
    Tests results:
    I tried to make several tests to identify the problem.
    Before I want to say that i tried restore / reset / etc.
    1. The pictures that are taken in portrait mode are not affected on double tap and rotate thing.
    2. Works if you zoom manualy (not by double tap) and scroll to a corner of a landscape picture before you rotate the phone.
    I add that any other application works fine on rotate / zoom / etc even photos app works OK if i dont double tap the picture before i rotate it.
    Still after the tests i am not able to identify where is the problem so i ask the comunity if can help me to identify it.
    thx in advance,

    Is anyone with same model 3gs / 4.0.1 who can check if have same problem ?
    Are only 4 steps:
    1. Open Photo App with phone in vertical position
    2. Select a landscape picture
    3. Double tape it (will zoom automaticaly)
    4. Rotate the phone in landscape position and write down the results.
    thx guys for your help,

  • PSE 7 is frozen with images in it - i dont want to force close and loose them - please help!!

    I load to iphot and transfer to PSE - my computer is very full and PSE has given me nothing but a colorwheel - i dont want to force close and lose what's in there  - please help me!!
    Thanks!!

    well, I can't answer questions about iPhoto, but either the photos are on your hard disk somewhere (in which case you won't lose them), or they are not on your hard disk somewhere (in which case I hope you have made recent backups).
    So which is it? Can you find the photos on your hard disk, or not?

  • A question about class and interface? please help me!

    the following is program:
    interface A{
    public class B implements A{
    public static void main(String [] args){
    A a = new B();
    System.out.println(a.toString());
    }i want to ask a question, the method toString() is not belong to interface A, why a can call method toString()? the interface call the method that isn't belong to, why? please help me...

    because a.toString() call the method toString() of class Object because B implements A, but extends Object and in the class Object there is a method toString(). infact if you override the method toString() in class B, a.toString() call toString() in class B.
    try this:
    interface A {}
    public class B implements A
      public String toString()
        return "B";
      public static void main(String [] args)
        A a = new B();
        System.out.println(a.toString());
      }by gino

  • Classes and object exercise! help!

    I'm really really new to JAVA... don't even know how to make a single line of code that will run.
    I have this exercise that wants me to.... creat a MySavings application that displays a menur of choices for entering pennies nickels, dimes and quarters... it tells the user to make a selection.... The application should include a PiggyBank object that can add coins to the piggy bank, remove coins, and return the total amount in the bank. The output looks like this:
    *1. show total in bank.*
    *2. Add a penny.*
    *3. add a nickel*
    *4. add a dime.*
    *5. add a quarter*
    *6. take money out of bank.*
    Enter 0 to quit.
    Enter your choice: 5
    yea.....can someone start me off? Because I have no idea where to start, or how to write this program.
    I only know that it will begin like:
    public class MySavins {
    please help. thanks in advance!

    Starwok wrote:
    I have no time to study from the beginning Then you won't be able to learn Java.
    Dx I usually I understand it when the code is given... i'll analyze it and be like 'ohh thats how u do it" and understand it when theres an example.I'm sure there are examples in your text or tutorial or presented by your teacher, as there are in the links I provided. And you can google for examples of I/O, computation, looping, whatever concept is giving you trouble.
    The first thing you have to do though is break the problem into pieces and figure out the steps for the different pieces without regard to Java.
    Im new to this school taking comp sci so Ive never learned this program from the beginning... and this course starts from chap 10. for my grade.That's irrelevant and doesn't change anything I've said.

  • I have amny duplicate contact numbers under various names , coz when i syncronised my i phone with facebook this happened , now i want to identify them and delete  them kindly help how i can save my time

    i was using blackberry earlier and when i syncronized it with facebook and gmail it added many contacts to my phonebook leading to duplication , now i have got all thoes contacts transfered to my i phone and even downloaded appliciation to delete duplicates in i phone though it is paid application but of no use as it has not recognised the duplicate contact numbers in phonebook but it recognise only exact duplicates kindly help me how i can delete duplicate contact numbers with diffrent names

    Just go ahead and go to settings>Facebook> Contacts OFF and do the same with Gmail. THe contacts related to those acct will dissapear. Then when you sync again with Gmail be carefull BCS IT SAYS IF YOU WANT TO JUST ADD THE CONTACTS OR MERGE THEM!!!!

  • Selection tool and rotate...help

    Hi! I'm new to this forum and this is my first post. I hope someone can help me with this problem.
    I'm using Illustrator CS2 on a Windows machine.
    If I create a new object (lets say a rectangle) and with the object selected, I move my selection tool outside the bounding box I'm not getting the "rotate" icon so I can rotate the object. It just doesn't show up.
    I've got Illustrator CS2 installed on my laptop, and on my laptop this functionality works fine.
    I cant figure it out. I've probably got some preference setting goofed up, but I don't know what it could be.
    Any Ideas?

    Never mind, I found the answer here in this forum (View > Show bounding box).
    I'm really not lazy..I tried search before posting.

  • I can not get Firefox to recognize my CAC reader or use my CAC reader to access websites requiring CAC login. IE works fine but I do not want to switch back and forth. Any Help?

    I have a CAC reader that Firefox does not recognize. It is installed correctly as have all the necessary certificates and IE can use the CAC reader seamlessly. I do not need the CAC to log-on to my computer, just to log-on to certain websites (mostly military).

    For users that need to change between certificates of their CAC card, I found in Firefox 4.x you have to import the DOD pki files. To do this follow the instructions at the URL below inside Firefox (do all 4). After successfully completing the imports, restart Firefox and when you get to a DOD website like "DISA web-mail" it will ask you to pick the certificate you would like to use. For the email certificate look at the details of each certificate and find the one that has your email address attached to it. This one you much use for all email certificate authentication.
    [http://dodpki.c3pki.chamb.disa.mil/rootca.html DOD PKI Certificates]
    Best Regards, Dimitri

  • I can't sign into my Youtube account on Firefox, but it works fine on Safari and Google Chrome. Deleting my web history, cookies, and etc didn't help. PLZ HELP!

    I click on sign in on Youtube.com and it takes me to the sign in page. I enter my information (correctly, duh) and then I am returned to the Youtube home page. I try to click Sign in again and the page is just refreshed. My account still exists bc I can reach it on Safari and Google Chrome, but I don't want to have to switch browsers. By the way the cookies ARE enabled, so Idk what the problem is.

    hello, please also make sure that in particular youtube.com & accounts.google.com are allowed to set cookies (at least for the session)...
    [[Give certain websites the ability to store passwords, set cookies and more]]

  • Class or interface problem..help needed PLZ.

    Here is my code..but i am constantly getting error message. :(
    public class VesselClass
         private double xCoord;
         private double yCoord;
         private double velocity;
         private double bearing;
    public vessel(double xCoord, double yCoord, double velocity, double bearing)
    this.setXCoord (xCoord);
    this.setYCoord (yCoord);
    this.setvelocity (velocity);
    this.setbearing (bearing);
    public double getXCoord();
    public boolean setXCoord(double x);
    if( x <= -1000.0 && x >= 1000.0)
         xCoord = true;
    else
              xCoord = false;
    return xCoord;
    public double getYCoord();
    public boolean setYCoord(double y);
         if (x <= -1000.0 && x >= 1000.0)
              yCoord = true;
         else
              yCoord = false;
         return yCoord;
    public double getVelocity();
    public boolean setVelocity(double v);
         if (v <= 0.0 && v >= 600.0)
              velocity = true;
         else
              velocity = false;
         return velocity;
    public double getBearing();                                                                           
    public boolean setBearing(double b)
         if (b <= 0.0 && b >= 360.0 )
              bearing = true;
         else
              bearing = false;
         return bearing;
    public String toString()
    return "( X-Coordinate = " + xCoord +" Y-Coordinate = " + yCoord + "V-Velocity = " + velocity +" B-Bearing = " + bearing +" )";
    public void display()
    System.out.println("(" + this.xCoord + "," + this.yCoord + "," + this.velocity + "," + this.bearing ")");
    Here is my method main()
    public class MyVessel
    public static void main(String[] arg)
    VesselClass vessel007 = new VesselClass(300.0, 500.0, 100.0, 250.0);
    System.out.println(vessel007.toString());
    Thanks a lot buddies.

    Okay. And did that message refer to a particular line
    of code, and you forgot to mention that piece of
    information? Somewhere before that line of code you
    have an extra closing brace (the "}" character). Get
    rid of that.It's far worse than that.
    Hopefully your code is indented, which would make it
    much easier to find extra braces. The stuff you
    posted wasn't.Normally I don't bother compiling code like this to see what's wrong, but IntelliJ made it easy to do.
    Your code could win a "worst code" contest. There are so many things wrong with what you wrote that it's a crying shame.
    Please go read a book on how to write Java. Your code is an example of how not to.
    Here's your code cleaned up so it compiles. It's still a bloody mess, but I have my own stuff to work on:
    package cruft;
    public class VesselClass
        private double xCoord;
        private double yCoord;
        private double velocity;
        private double bearing;
        public static void main(String[] arg)
            VesselClass vessel007 = new VesselClass(300.0, 500.0, 100.0, 250.0);
            System.out.println(vessel007.toString());
        public VesselClass(double xCoord, double yCoord, double velocity, double bearing)
            this.setXCoord(xCoord);
            this.setYCoord(yCoord);
            this.setVelocity(velocity);
            this.setBearing(bearing);
        public double getXCoord()
            return xCoord;
        public boolean setXCoord(double x)
            boolean thisClassIsCrap = true;
            return thisClassIsCrap;
        public double getYCoord()
            return yCoord;
        public boolean setYCoord(double y)
            if (y <= -1000.0 && y >= 1000.0)
                return true;
            else
                return false;
        public double getVelocity()
            return velocity;
        public boolean setVelocity(double v)
            if (v <= 0.0 && v >= 600.0)
                return true;
            else
                return false;
        public double getBearing()
            return bearing;
        public boolean setBearing(double b)
            if (b <= 0.0 && b >= 360.0)
                return true;
            else
                return false;
        public String toString
            return "( X-Coordinate = " + xCoord + " Y-Coordinate = " + yCoord + "V-Velocity = " + velocity + " B-Bearing = " + bearing + " )";
        public void display()
            System.out.println("(" + this.xCoord + "," + this.yCoord + "," + this.velocity + "," + this.bearing + ")");
    }%

  • BitmapData Resize and rotation

    Hi there,
    I'm having some problems manipulating an image with AS3 and Flash Player 10.
    I've managed to edit a Bitmap from a local image by changing it's size and rotation with the help of class Matrix.
    The problem is that now I want to save the new image to the disk as a PNG file.
    I'm using a PNG as encoder that requires a BitmaData.
    When I passed that Bitmap.bitmapData all of the matrix changes do not get reflected in the bitmapData.
    Here is the code:
    var BMP:Bitmap  = Bitmap (LOADERINFO.content);
          BMP.pixelSnapping = PixelSnapping.ALWAYS;
          BMP.smoothing     = true;
          BMP.bitmapData.lock ();
    var scale:Number = .2;
    var matrix:Matrix = BMP.transform.matrix;
          matrix.rotate(90*(Math.PI/180));
          matrix.scale (scale,scale);
         BMP.transform.matrix = matrix;
    var BMPD:BitmapData = new BitmapData ( BMP.width, BMP.height, true, 0x00000000 );
          BMPD.draw(BMP);
    var BMP2:Bitmap = new Bitmap ( BMPD, PixelSnapping.ALWAYS, true );
    // JUST TO TEST
    addChild (BMP);
    addChild (BMP2);
    Thanks,
    PM

    oops, typo:
    kglad wrote:
    try:
    var BMP:Bitmap  = Bitmap (LOADERINFO.content);
          BMP.pixelSnapping = PixelSnapping.ALWAYS;
          BMP.smoothing     = true;
          BMP.bitmapData.lock ();
    var scale:Number = .2;
    var matrix:Matrix = BMP.transform.matrix;
          matrix.rotate(90*(Math.PI/180));
          matrix.scale (scale,scale);
         BMP.transform.matrix = matrix;
    var BMPD:BitmapData = new BitmapData ( BMP.width, BMP.height, true, 0x00000000 );
          BMPD.draw(BMP,matrix);
    var BMP2:Bitmap= new Bitmap(BMPD);
    // JUST TO TEST
    addChild (BMP);
    addChild (BMP2);

  • Me, Classes and Class rooms

    Hi,
    note : plz take your lunch on time :)
    I have a class called as Datastructure(one of my favorite classes), this class has methods:
    addKey(blah,blah...)
    containsKey(blah...)
    getKey(.....)
    getValue(.....)
    now I have to design a class clled Parameter, this class has to read patameters (from an ASCII file which does not change)into Datastructure so I extended the Datastructure class as
    .blah blah...Parameter extends DataStructure ....{
    Parameter's method readParameterFile reads the parameters and internally calles addKey method to fill in values. I am using few of the methods of DataStructure (containdKey, getKey,getValue.....).
    Some of DataStructure's methods are not required(or not used )here in Parameter. How should I not include them, or what ever I have done is correct.
    (one more thing) I want to call the Parameter's methods as Parameter.getKey()...(with out usingan object of Parameter)
    I am STILL new to Object Oreanted programming plz suggest me some good online matrial to learn how-to about designing Classes and learn about object oreanted designing

    note : plz take your lunch on time :)It will be another 23 hours in the current timezone.
    I am STILL new to Object Oreanted programming plz
    suggest me some good online matrial to learn how-to
    about designing Classes and learn about object
    oreanted designing
    http://java.sun.com/docs/books/tutorial/java/index.html

  • Classes and methods to send email to SAP inbox

    Hi,
    I want an appropriate class and method to send emails to SAP Inbox.
    My objective is that i convert spool to PDF and send it to SAP inbox as an attachment.
    I've used  'CONVERT_ABAPSPOOLJOB_2_PDF' and 'SX_TABLE_LINE_WIDTH_CHANGE' to generate PDF attachment.
    I tried Function modules 'SO_DOCUMENT_SEND_API1'/'SO_NEW_DOCUMENT_ATT_SEND_API1' to send email.
    It was working fine till now (for last 4 months). Now the Basis team has run some patches due to which the PDFs are getting damaged.
    Now the FMs 'SO_DOCUMENT_SEND_API1'/'SO_NEW_DOCUMENT_ATT_SEND_API1' seems to be useless.
    So i tried some methods in classes cl_document_bcs and cl_bcs. These are working fine for Internet mails but not SAP mails.
    Please suggest me some Classes and methods to send the PDF atachments to SAP inbox.

    to have all SAP inbox messages into lotus notes inbox you have to sync the same with the use of connectors rather than resending them
    check out this link
    http://www-128.ibm.com/developerworks/lotus/library/lei-sap/
    for outlook its done using MAPI
    http://www.sapgenie.com/faq/exchange.htm
    Regards
    Raja

  • Transport class and characteristic definitions

    Hi!
    I know it's not really an abap general question, but I couldn't find better forum for this.
    Does anyone know, how can I transport class (created with CL02 transaction) and characteristic (CT04 transaction) definitions?
    Thank you
    Tamá

    Hi Tamás,
    Transport Class and Charecterstis
    hope it helps you.
    Regards!

  • Slope and Rotation from face

    Hi.
    I'm trying to get the slope and rotation from a face that the
    user clicks on.
    I created the attached code which was fine untill I realised
    that it gives the wrong results if the selected face has a
    combination of slope and rotation.
    Please help. This has been bugging me for ages!
    Trevor

    Hi Ben,
    Thanks for your reply.
    Your use of perpendicularto() function has possibly helped
    with a separate problem I 'm trying to solve.
    However, I don't think it actually helps me for this problem.
    I'm not trying to align an object to a face. I'm trying to
    get the individual rotation and slope components from a vector.
    These values are then used for analysis.
    Here's an example:
    If I pick a face and its normal is
    vector( 0.0000, -1.0000, 0.0000 )
    I can get its rotation
    put faceNormal.angleBetween(vector(0,1,0))
    -- 180.0000
    If I change the slope of the face so that its normal is
    vector( 0.0000, -0.9461, 0.3240 )
    when I get the rotation of the face normal, I get
    put faceNormal.angleBetween(vector(0,1,0))
    -- 161.0954
    but I should still be getting 180.000 as the rotation is
    still the same.
    Hope I'm confusing things with this explanation...
    Regards,
    Trevor

Maybe you are looking for