I want a preview for only the pick image

I sync my photos with an iPod. As such I only want to sync the images that are picks. I edit virtually every single image in my library, so as it is if I have automatic generation of previews turned on, all the images including non-pick ones in each stack will have a preview. This causes 2 or more versions of the same image to be put onto the iPod not just the best one.
For the past few months I have had automatic generation of previews turned off, and I generate them by hand after I finish editing a batch. This is a little time consuming and I often either forget to generate the previews or somehow I manage to generate previews for all images in a stack. Aperture doesn't help because it doesn't show which images have previews and which don't.
Rather than manually going through each stack and seeing which images have previews, I'd like to automate the process somewhat to make sure that only the picks have previews. Is there an easy way to do this?
I've thought about selecting all, then opening all stacks, then inverting the selection, and deleting previews from those selections. Then inverting the selection again and updating the previews. I'm not sure if this would work and I'm a bit scared to do this on a large library (opening all stacks in a selection of 10000 stacks could take a few days?)
I wish Aperture had better handling of previews in this regard.

Problem with creating a smart album is that all images would show up in that one album on the iPod and I want them somewhat separated, even though no hierarchy of folders on the ipod makes that a bit of a paint too.
I am currently trying the select/invert method. I'm doing it one album at a time so it's more manageable. At the same time I'm able to make sure I have the correct image as my pick, and also forces me to reexamine what photos I have in my albums and delete any stuff that isn't worthy It's working pretty well, though it is time consuming. Once I'm done I'll have to be careful to make sure only the picks get a preview.

Similar Messages

HT4436 Since installing Ios7 280 music tunes out of a total of 360 will now only play when I'm within range of WiFi. How can I get them back on my Iphone 4s and scrap this stupid icloud that I did not want or ask for in the first place.

Since installing Ios7 280 music tunes out of a total of 360 will now only play when I'm within range of WiFi. The remainder now appear with the stupid Icloud logo beside them. How can I get them back on my Iphone 4s and scrap this stupid icloud that I did not want or ask for in the first place. Why can't rotten apple ask if you want the dam icloud rather than just stealing everything without permission and then you can only have access to it through wifi.

Wow, just posting and it seems that there is a solution that is working for me...
What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice!

I want to cancel my Adobe Creative cloud anual signature, to change for only the photoshop signature.

I want to cancel my Adobe Creative cloud anual signature, to change for only the photoshop signature.

Hi Andrec73513286,
If you are at a point in your membership where you could cancel yourself the process is explained here: Cancel your membership or subscription | Creative Cloud
Otherwise, you'll probably need to contact our customer support for assistance
Contact Customer Care
- Dave

Can I put only the top image of a stack in a Mobile Album?

I have an album that contains stacks and I would like to put only the top images of these stacks in a Mobile Album. Is this possible?
I have tried to make a new album and only put the top images in this new album without sucess. Is it possible to have a stack of images in one album and only the top image in another ablum?
I hope someone knows about this
Hans Brodin

Hi Surendra,
My target is to find a convenient way to transfer my best photos only to my iPad
By using stacks for similar photo and putting my best shot on top I reduce the number of images displayed in the organizer. A typical stack contains of 8 shots.
Then I put my best stacks in an album. By using the Slide Show in PE I have a convenient way to display only my best shot and tha's OK for my computer were I have a lot of disc space.
But on my iPad the size of memory is limited and it also takes some time to transfer a huge number of images so now I want to find a convenient way of tranfering only the top image of each stack. If I could have a separate album containing only the top images from each stack the task would have been easy.
Now this is not possible so now I hope there is another solution than acually making a separate copy (a new file) of each top image and put these copies in a separate album. This will of course work but it will end up in having two identical images showing up in the organizer and so I do not really like this idea.
I hope I have managed to describe my intention and do you have an idea for a workaround or do I need to make separate copies?
Thanks a lot
Hans

Only the first image of table appears

Hello,
my problem concerns dynamically added images in templates designed with Template Builder 5.6 Build 45 for Word 2002 (10.4219.4219) SP-2 and Oracle E-Business Suite 11.5.10.2.
My template includes a simple table with an image field containing an URL. I created a dummy image with alternative text like url:{image_field}. The URL itself exists and works in the browser. Running now the report with example data as XML publisher admin, only the first image appears, followed by all other rows showing the same image. It’s always the first one that is repeated (of course I made sure that each element contains its specific URL). I also tried to use the concatenated string for building the specific URL at runtime, but in vain.
Is there anybody out there with a good idea?

I'm not sure what's going on, but I'm having a similar yet different issue with slideshow images. I have a full screen slideshow on a tablet site with 2 slides in it, but one of them shows up white/blank in preview. I've ensured both images are in the layers and assets and I've deleted the slideshow and started from scratch twice already. What's interesting is that if I move the images' order within the slideshow widget in the layers panel, I can see either one, but not both in rotation in the slideshow. I just did this same slideshow for the mobile version and that works fine, so I'm stumped.

Index an array of images only the last image shows

Hi everyone,
I try to index an array of images and all but the last element give me the error: "not an image."
Here is a picture of the vi. The first for loop loads the images and stores them in an auto indexed tunnel. Every diagnostic I ran on this loop showed everything is fine. The second for loop should display the sequence of image stored in the auto indexed tunnel, but it does not. Instead I have the error message that elements 0 to n-1 are not images, and only the last image is displayed.
What am I doing wrong?
Thanks for your help.
and the vi:
Solved!
Go to Solution.
Attachments:
PulsedImageDisp1.vi ‏31 KB

Speed of what? The second loop can't run until the first loop is done, and all the operations are linear. I'm guessing you're referring to the perceived speed of displaying the images one after the other so you don't have to wait for the next image to be read which is why you pre-load all the images. Otherwise, the overall speed should be the same whether you use one loop or two. Actually, to be technically accurate, the two loop version will likely be a little slower overall since LabVIEW has to allocate more memory to store all the images, while in the one loop version it is only ever dealing with one image. If the images are large then you might actually run into a memory issue with the two-loop version (arrays need contiguous memory). Just something to keep in mind and to be careful about.

Unable to find a volume that is suitable for staging the boot image.

I have an SCCM 2012 OSD task sequence that is failing when it tries to stage the boot image to the drive before rebooting. The log file shows:
Staging boot image CET00028 TSManager 6/5/2014 3:57:58 PM 1492 (0x05D4)
Mounting \Device\HarddiskVolume6 at Z: TSManager 6/5/2014 3:57:58 PM 1492 (0x05D4)
Unmounting volume Z:\ TSManager 6/5/2014 3:57:58 PM 1492 (0x05D4)
Checking to see if the data path is on a bootable volume TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Volume C:\ because it is not suitable as the system partition TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Searching for a volume to stage the boot image TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Volume S:\ is not NTFS TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Volume C:\ because it is not suitable as the system partition TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Volume R:\ is not on a fixed disk TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Volume X:\ is not on a fixed disk TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
BootImage::FindBootableVolume( NULL, sPath), HRESULT=80070490 (e:\qfe\nts\sms\framework\tscore\bootimage.cpp,1045) TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Unable to find a volume that is suitable for staging the boot image.
Element not found. (Error: 80070490; Source: Windows) TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
I've seen others get this error code and fix it by injecting the correct storage drivers. In my case I believe I have the correct storage drivers. In a separate MDT 2013/WDS environment I can deploy
8.1 to the same machine using the same drivers with no problems so my drivers appear to allow proper access to the drive. When I check the volumes with DiskPart they all appear to be fine. The C:\ volume has the _SMSTaskSequence folder on it with
files so it is certainly writable. The system is set for UEFI mode. Of course if I change it to Legacy mode this problem doesn't happen. I have also integrated MDT 2013 into SCCM console and both an SCCM task sequend and an MDT task sequence
do the same thing. Any ideas?
Thanks,

From the error, the C could not be the staging location because it is system partition. You need to format a fixed drive to NTFS partition and try again.
Juke Chou
TechNet Community Support

I want better solution for adjusting the Material stock values for the last

my Customer need to adjust( Decrease) the closing stock values for the following materials / plant wise as on 31.03.2006 for meeting statuary compliance.
Material1 : RS: 4149599    QTY : 10181.03 Ltrs
Material 2 : RS: 1318596     QTY: 2152.76   Ltrs
As per my knowledge MM posting periods can open current month and Previous month only. For the reason I proposed the solution as follows:
Step 1 : post FI Journal Entry on 31.03.2006
Opening Balance G/L Account Dr 4149599 + 1318596
Closting Stock a/c                      Cr 4149599 + 1318596
Step 2.
Change the Material Price in MM through T.Code: MR21
( Posting will be allowed in current or previous months)
This makes our CO reports accurate.
Please suggest the better solution if it is possible in MM for adjusting the Material stock values for the last financial year.
WIth Best Regards,
Rajesh
<b></b>

Hi Madhavan,
Unfortunately this forum deals with migrations from non-Oracle
environments to Oracle. You seem to be dealing with migrations in
an Oracle environment mainly.
I would recommend that you contact Oracle Applications and RDBMS
support directly. They will have the most up to date
information/advice on performing these actions.
Regards
John
Madhavan (guest) wrote:
: Hi John
: Thanks for your reply.
: Actually I am planning to upgrade the system.
: 1. I Want to Upgrade Oracle Financials release 10.7 to the
: latest version (11.x)
: 2. Oracle 7 database to oracle 8 or 8i.
: 3. Oracle is running on NT service pack 3. Do I need to upgrade
: this?. If not what is the impact on Windows NT?
: 4. Is the majority still running smart client 10.7 and database
: 7?
: 5. What is the necessary time to implement these upgrades? What
: type of consulting I need to have?
: 6. I have some employees working on it? Will these changes
: affect them?
: What type of precautions I need to take on the whole??
: Thank You
: Madhavan
Oracle Technology Network
http://technet.oracle.com
null

I want to put unable only the form in use!!

hi!
jdeveloper 10.1.3.0.4
i have a mdiform(mainForm) and that mainForm call a internals Frame.
when i have a internalFrame(Internal A) in runtime, InternalA call an InternalB.
When internaB have a focus, i want to can use only InternalB, all the forms must be disabled.
how do can i do this?

Thanks, but, using the "free" version of Reader, there is no opportunity to open nor import the xml data - the menu options do not exist - there is no import listed.
If we try to open the xml file directly, then we get an error - something to the effect of "unsupported file type, or the file is corrupted".
I just noticed in my Pro version that there is the command File ->Form Data ->Import Data to Form... command. Is this what you are referring to?
What do you recommend? Perhaps the easiest thing to do would be to purchase a few copies of Acrobat Pro for the reservations people to use? I was hoping that the free version of reader would do it, but perhaps not?
Thanks again,
Rob

Is there a way to filter for only the missing files in a catalog folder or collection?

I don't think there is anything more to be said on this one.

If you go to the catalog tab and choose all photographs and then run the menu command you will see the number of missing photos in the catalog (image below)
You will still need to re-connect them. But if you have moved an entire folder the folder will have a question mark against the name. You can right-click on the folder name and choose Update Folder Location. Then navigate to where you put the folder and LR will update the links for all the images in that folder.
See the link below for further information.
http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

How do I copy only the flagged image in a stack to an album?

Within a project containing many stacks, I want to make an album showing only flagged images from some of these stacks. But when I try to do this, I end up with the stacks in the new album - which is not what I want.
For example, from a small gathering I have 94 photos in 24 stacks. (Among other things, I auto-bracket.) The correct image is the "pick" in each stack. I flagged 8 photos and uploaded them to a Picasa Web Album, for people to see. I want to make an album inside the project showing only the photos I uploaded, but I have not found how to do this.
I can view the 8 flagged photos by filtering, and though each has a badge showing the number of photos in its stack, the remaining photos do not appear if I click on the badge or press Shift-K or select Open/Close Stack: all that happens is that the badge toggles between the number of images in the stack ("x") and "1 of x" - say, between "4" and "1 of 4", if there are 4 images in that stack.
But when I put a flagged image into an album, I get its whole stack. It does not matter whether I drag it or choose New > Album and click the "Add selected items to new album."
This seems like such an obvious task that I feel I must be missing something.
Any help?

Just to expand on Frank's answer: that's how Aperture works. Stacks travel together. You will see the same behavior regarding filtering in the Album that you see in the Project. (Album is a container. As with a Project, you can filter the Album container to show only items that meet your filter criteria, but the contents of the container don't change by being filtered.)
This is why Album picks are so useful. In Projects, the Stack Pick is the left-most Image in the Stack, and is the Image that shows when the Stack is minimized. In Albums, you can specify an Album Pick. (The default Pick is the Stack Pick.) When a Stack in an Album is collapsed, the Album Pick is the Image that shows on top.
Added the following paragraph:
So you could have a Project with Stacks of bracketed exposures (an excellent use of Stacks), you could make the best of these the Pick, and then you could make an Album showing, say, the second best ones by putting them in an Album and designating the second-best Images as the Album Pick of each Stack.
You should have no trouble creating an Album of your selected Images (in this case, you are selecting by "is flagged"). With Stacks collapsed, you should see what you seem to want, which is a group of the Images you selected to be in the Album.
denke wrote:
I want to make an album inside the project showing only the photos I uploaded, but I have not found how to do this.
That the rest of the Images in the Stack are there shouldn't be a concern. Why is it?
Message was edited by: Kirby Krieger

Photo flow object not using thumbnails, only the primary image

I'm currently evaluating the trial version of this to see if it's something we can tweak to the way we'd like it, and I can't seem to get the object to use the thumbnail views (presumably for the angled views to either side of the centered image). What we're trying to do is to use a version of the image with a fixed location "tool tip" above it when it's centered and displayed at the full size, but use a "thumbnail" image that doesn't have this. The intention is when an image is centered, a box will be above the image with a brief description (the powers that be want it stationary rather than hover with the mouse location), but the thumbnail views to either side will not have it.
The link to the page using it is www.perleyhalladay.com/beta/index.html, and the XML file is www.perleyhalladay.com/beta/PhotoFlow/gallery.xml. "magesFolder" is set to PhotoShow/images (relative to the location of index.html), and the images load fine...it's just that I've tried swapping thumbnail images to mix them up (even with the example version I downloaded), and it seems as though it's using the primary image for both the thumbnails and the centered version. Is there a variable missing from the XML file or a PARAM missing from the HTML file that would enable/disable the use of thumbnails globally.
Is this perhaps an undocumented limitation in the trial download version that would be remedied in the paid version, or is there something else amiss?

If you are addressing some applicarion that someone created and is selling, you'll need to contact the seller to get details about their product.

Is it possible for Firefox to show a preview pane in the file/image upload window?

I'm not sure if this forum is the correct place to start this conversation. Let me know if there is a more appropriate location. Anyway, some applications such as Gimp show an image preview in a pane on the right side of the file->open window. It would be nice to have this feature on the Firefox upload window. Currently, when uploading an image with Firefox, there are only small thumbnails to help identify files. This makes it rather difficult to sift through large directories of image files. In Ubuntu, which uses gtkfilechooser, I think it is the responsibility of the initiating program to invoke the preview feature. Some key words of note(that I do not understand) are gtk_file_chooser_set_preview_widget, gtk_file_chooser_get_preview_widget, gtk_file_chooser_set_preview_widget_active, gtk_file_chooser_get_preview_widget_active.
I am new to Firefox/Linux and don't have the skills to make this improvement. Any help with this issue will be greatly appreciated. Thank You.

Which distro are you using? I'm using Ubuntu. Ubuntu uses gtkfilechooser for picking files. I think kubuntu uses a different file chooser. I'm not sure how many types of file choosers exist.

ITunes movie playlist full-screen on tv for only the first one

Hi,
I am experimenting with getting what's on my MacBook Pro (15" 2ghz quad core, bought 5/11) displayed/played on my HD TV. I have tried all kinds of approaches (XBMC, Plex, Boxee (the software version), Front Row, Miro, Serviio, TV Mobli, Twonky, and who knows what else on the MBP as well as XBMC on an older Powerbook as well as using DirecTV's Media Share) but none are satisfactory. The current approach is to connect the MBP to the TV by a display port to HDMI cable.
The problem I am having is: when using iTunes to play movies on a playlist, I can get the TV to display the first movie as full-screen but when it comes to the next one, I lose full-screen. It reverts back to the original size of the video. When I play the same playlist on the MBP display, successive movies stay in full-screen. (Of the two movies i have tested, the first is an mp4; the next one is an m4v.)
Is there any way I can get movies played on an iTunes playlist to stay full-screen when displayed on the TV?
All of my movies are things I've recorded with EyeTV or otherwise captured or digitized and most are converted to QT. Some are flash, some are Mpegs and I may have a few other formats. Nothing has DRM. I don't have any copyrighted "real" movies; they're all little things (music videos, segment from home movies, etc) I have put together. (Features like "scraping" with Plex for example, are completely worthless/inappropriate for me and otherwise ruin what could be a good approach to dealing with all of my media.)
I would also be curious about anyone's ideas about the best way overall to display movies and pictures from the MBP onto the TV. For streaming video I will just drag a browser window over to the TV and then go full-screen. That works for me. It is important that I keep the MBP display free for the usual computer stuff. I don't want it blacked out or otherwise made useless so any suggestion has to bear that in mind. So far I can do almost all that I want but I haven't settled on the best way yet.
I am ok with having to switch the audio output on the preference pane to the TV when I do this.
I am having one other issue: Sometimes I will lose audio half-way into one of these short movies (3-4 minutes long) on my iTunes playlist. I have dragged the movie window back to the MBP display and it still has no audio. I will then restart that movie and it will play fine on the MBP. I don't know what is going on with that. I am worried that the cable may not be able to carry audio ALL the time but why would I still get no audio when I have dragged the movie window back to the MBP if the cable was at fault? Any ideas on what is going on here?
Many thanks.
John L

EDIT: Please disregard the previous post. I am swimming on vicodan after surgery this morning and did not realize how atrocious my sentence structure and spelling were. Yeesh.
Not sure what the problem is. Using my iPhone 3G and component cable I watched Iron Man in widescreen on my Mitsu 62" tv but when I tried to play Journey to the Center of the Earth it will only play full screen. When I play it on the iPhone it will play in widescreen. Does anyone have a clue here because I sure don't. Thanks. Happy Thanksgiving.

I have "Load Images Automatically" disabled. How can I load images for ONLY the page I am currently viewing?

I have intentionally disabled "Load Images Automatically" so that it is easier to view my desktop remotely via VNC or Remote Desktop. Animations and other graphics kill the performance of these remote viewing apps. However, when I reach a desired web page (the one I really intend to read in full), I want to load all the images ***for that page only***.

I don't think Firefox has that features. It views loading images as a permissions issues toggled on a site-by-site basis rather than a performance issue toggled on a page-by-page basis.
Maybe an add-on would give you a better balance of features? These two popped up in a quick search:
[https://addons.mozilla.org/en-US/firefox/addon/image-block/ Image Block :: Add-ons for Firefox]
[https://addons.mozilla.org/en-US/firefox/addon/imglikeopera/ ImgLikeOpera :: Add-ons for Firefox]
If you try either of these, let us know what you think.

I want a preview for only the pick image

Similar Messages

Maybe you are looking for