I want a rectangular frame round part of image to draw attention to it?

I am making a clip to demonstrate my camera zoom by starting off at W/A and zooming in.
I want to highlight the area I am going to be zooming to by drawing a frame around it.
The only rectangles and circles I can find in the Generators appear to be solid shapes or solid shapes with a border.
There doesn't appear to be any way of getting rid of the central colour so the underlying video will show through.
Any ideas.
I could do it in FCP 7 but if possible I would like to use FCP X.

I must be blind!
I have just spotted the Fill tick box!
I was looking for it before I posted but could only see the Outline tick box!
Send a brief reply and you can have the rest of the points.

Similar Messages

I CAN'T GET MY BRUSH IN PHOTOSHOP ELEMENTS 13 TO CHANGE FROM A PLUS SIGN WITH A CIRCLE IN THE MIDDLE. I WANT TO USE A ROUND BRUSH.

I CAN'T GET MY BRUSH IN PHOTOSHOP ELEMENTS EDITOR TO CHANGE FROM A PLUS SIGN WITH A CIRCLE IN THE MIDDLE. I WANT TO USE A ROUND BRUSH.

You have the caps lock on

Since last 2 updates (yesterday to ios 8.3) the screen area on my ipad mini when in Facebook is smaller with a big empty 'frame' round the edges

Since last 2 updates the screen area on my ipad mini when I am on Facebook has shrunk with an empty area like a frame round the edges. How can I get it back to fill the screen?

How to remove ios 8 ? This is biggest failure of Apple. It slow down my ipad , freez application, freez key board....?

Mwaaaa! I just want a black line round my images!

Not all these fancy borders and stuff!
I've just installed PE9 (today, actually!) but already it's giving me a migraine! I'm creating a vBulletin moderator training manual and all I want to do it put a thin black line around an image for definition and neatness.
For years I've used anAdobe PhotoDelux Home Edition v4 (yeah - really, really old! - just like me! ). It's served me well but is very basic and I wanted to do more. So as a starter, I thought I'd try something I've been doing for years but can I find it? No siree!
Please give an old gal some help, folks! I want it to look like this

With your image open in the Editor press ctrl+A to select all (you will see the marching ants)
On the Menu click Edit >>Stroke
Set the width to 1px and choose black as your color and select inside edge.
Click OK.

Trying to link a thumbnail in one frame to a larger image in another frame GOLIVE 9...

Hi.
I am using Adobe Golive 9.
I found a tutorial on the internet that allows you to create an image gallery with clickable thumbnails
http://www.tutorialhero.com/click-48179-create_an_image_gallery_with_clickable_thumbnails. php
However, the tutorial is designed for a page without frames.
I want to be able to do this using frames.
I want to link a thumbnail on a page in one frame to a larger image on another page, so that when your mouse is over the thumbnail,
the larger version appears in the other frame.
This is what my frames look like so you get an idea of what I'm trying to do
And here is a picture of the thumbnail in the lower frame and the larger image in the frame above it.
Could someone please give me STEP BY STEP instructions on how to do this? I'm new to Golive, using version GOLIVE 9, and I know this can be accomplished using "Set Image URL" but have no idea how to do it.
Thank you for your help all.
Chris.

A link in one frame is designed to call another page into some other frame, not an image. You can't use SetImageUrl across different pages. You'd probably have to put each of your large images on a page, and call each page each time. I'm not sure why you're so set on using frames, they have many disadvantages.

Exporting a freeze frame as a still image

Hi I need to extract a still frame from some footage, how do i do this so i can export it so i can use on a website ?
Hillster

Here's a really cool way if you have Photoshop, especially if you ever need to export multiple still frames:
Generally after a cut is complete we export a Quicktime movie of it in our favorite format [generally ProRes or XDCAM EX]. Open that file in a Quicktime player.
Open Photoshop create a new document, in our case 1920x1080P.
Place the Quicktime player just above the Photoshop document, scroll to the still you want, hold down shift [this centers the image in the center of the frame] and drag and drop into the Photoshop document.
Do this as many times as you want, each time you drop an image it creates a new layer in the Photoshop document.
Once you have the stills you want, close Quicktime, in Photoshop go to File/Scripts/Export Layers to Files and it will export, name and place the files where you tell it in TIFF, JPEG or whatever format you choose.
We do a lot of corporate stuff and since exporting a still from FCP was much more time consuming than it should be we rarely provided stills. Once we were told about this method we provide 15 to 20 stills from every project for use in brochures and other promotional materials.
The cool things is that they're not aware how quick and efficient it is to do this, and we $till charge for every $till!

Changing fill colour for partly transparent images

Does anyone know how to change the fill colour used for partly transparent images? I have a bunch of PNGs that I made for use as clip art, which I imported into iPhoto (that way I can use the media browser with Pages and Keynote).
Unfortunately, the images (which are black) are shown on top of a black rectangle both in iPhoto and the media browser. I've tried changing the background colour to both gray and black, but the 'fill' colour stays black.

There's no way to change it if you want to keep the transparency for use in other applications or web pages.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

How to display a rectangular ROI in a new image?

Hi,
I want to display a rectangular ROI in a new image. I want the rest of the image to be cropped.
I selected the ROI by using the 'IMAQ Select Rectangle' vi And
changed the rectangle output generated into an ROI using 'IMAQ Convert Rectangle to ROI' vi
Is there a more easier way?
Thank you.

I suppose you would have read laura's answer in this thread
Hi Everyone,
I am reporting the strange behavior that may be linked to the loading time for the editor. I'll keep you updated as I hear updates.
Thanks,
Laura
Ohla and editing works afterall but who cares if it takes a couple MINUTES!!!!
Message Edited by muks on 08-30-2008 02:08 AM

Make a round button with image

i have image 40x40
i want to design a round button for it and when click no rectangle or squre is visible.
how can i design it
plz give me a line of code.
thanks

Put you image on a jlabel, then add a mouselistener to the label

HT200285 I want to change my wallpaper to an image that was available before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background. Greyish hues. Where can find the image & how do I get it back on my phone?

I want to change my wallpaper to an image that was available
before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background.
Greyish hues. Where can find the image & how do I get it back on my phone?

I want to change my wallpaper to an image that was available
before I upgraded to IOS 8.1.3 - a close-up image of long reedy grasses with hazy light in the background.
Greyish hues. Where can find the image & how do I get it back on my phone?

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler

Wanting to use Photoshop CS6 to open images directly from iPhoto 11. Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open images directly from iPhoto. Before I installed PS I was not able to edit photos in iPhoto 11. Nothing

Wanting to use Photoshop CS6 to open images directly from iPhoto 11.
Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open
images directly from iPhoto. Before I installed PS I was not able to edit photos
in iPhoto 11. Nothing happens when I click on ‘edit‘ it is blank.
And now it will not work using Photoshop CS6 either.
From Help Center I have gone to iPhoto/Preferences/ Advanced and chosen Photoshop CS6 to Edit Photos but then cannot find an 'Open' to click? Perhaps this is the problem?
When I select a photo in iPhoto and click the Edit button - nothing happens.
Please advise. Glenys

This may be of help to you:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE

I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE
== This happened ==
Not sure how often
== After innstalling windows 7

As a suggestion I'd put the Text_io segments into their own begin - exception - end sub-blocks within the main code. This way if Text_io does raise an exception you can catch it earlier as it may be able to recover - That is if it is a text_io exception.
Other than that you;ll have to step through in Debug.

How do I delete a dashed image frame, but keep the image?

How do I delete a dashed image frame, but keep the image?

It may stroke, on the control panel set stroke color to none, and weight to zero [0].

I want to create a DVD of JPEG images

I want to create a DVD of JPEG images from multiple albums in my catalog. I am using Windows 7 and Premier Elements 11. I have not been able to insert more than one menu marker in my "video." Any suggestions?

BobHabig32453
I seldom ran across a question to which I could offer an abridged answer. Sorry about that.
There is an assortment of miscellaneous information to guide your path as to what you can and cannot do with regard to a Premiere Elements DVD Template that represent the Main Menu and Scene Menu set. The number and kind of menu markers that you place on the Timeline are linked to the Menus - Main Menu or Scene Menu depending whether you have placed a Main Menu Marker or Scene Marker on the Timeline. Again, do not put a Stop Marker at the end of the last file on the Timeline.
Each movie (in your case album) cannot have its own Scene Selection page or pages. All the Timeline scene markers representation found on the Scene Selection page or pages is there in the order that each was placed on the Timeline. There is a limited amount of space under each scene thumbnail, and you do want to avoid button overlap.
Each main menu and scene menu that came with the program is designed with a certain number of buttons per page (Main Menu page or Scene Selection page). When the number of Timeline markers exceed the number of designed in buttons per page, the buttons spill over to additional pages (each a copy of the first).
Most Main Menu pages come with Play All button, Scene Selection button, and some with Main Menu or Bonus Movie button. Most are text type buttons, fewer are thumbnail type buttons for this Main Menu. You see the thumbnail type buttons in the Scene Selection Page, and typically the maximum number there is about 6, may goes to 8 in some rare instances.
Once you introduce Stop Markers to separate the multi movie type setup, your Play Movie (Play All) button on the Main Menu is meaningless. And, the reminder, two menu markers cannot occupy the same spot on the Timeline.
Important to the project are the pixel dimensions of the photos and the duration of the content. If you are heading for DVD-VIDEO on DVD disc Standard or Widescreen, the pixel dimensions should not exceed 1000 x 750 pixel (landscape) – classical recommendation here and elsewhere. Greater than that typically does not accomplish much other than stressing out the program. The level of computer resources can often dictate whether the program stress will set in sooner or later. That 1000 x 750 which is not written in stone is close enough to the export standard and will leave some room for pans and zooms if needed. Look to the Premiere Elements burn dialog prior to burn to and look at the Quality Section’s values for Space Required and Bitrate. The DVD-R 4.7 GB/120 min is in reality 4.3 GB and the “for best results” classical recommendation is not to exceed 90 minutes for this type of disc. There is also the DVD double layer disc 8.5 GB (really 7.3 GB)/240 minutes to think about.
How does this all impact what you outlined for what you would like to do? Many thoughts on that, but for starters:
Are your photos sized properly for a NTSC or PAL DV Standard or Widescreen project? Are you heading for NTSC or PAL DVD-VIDEO Standard or Widescreen? Are you considering Blu-ray disc format on Blu-ray disc in this regard for your Premiere Elements project.
How many albums do you envision in each of your planned DVD discs. I suspect the number is going to be in excess of 6 or 8. Here some of the considerations might be:
…switch the names of the .psd files for the main and scene menu (just the names) so that you can take advantage of the larger number of scene buttons on an already designed Scene Menu. The Timeline markers are Main Menu Markers in this instance, no Scene Markers. Result: One page Main Menu with thumbnails there displaying the first photo in each album.
…editing the .psd file for a DVD Template to add more buttons to the design. That requires strict adherence to requirements for doing that, including editing with Photoshop CS and later or a version of Photoshop Elements that will open the Layer Groups of the .psd so that you can get at the Folders and Files that you need to modify/duplicate and the like.
If you wanted text buttons instead of thumbnail buttons, you could look at a DVD Menu such as Faux Widescreen Main Menu Page and customizing that.
Not sure if long trip descriptions (text) would be feasible. I can offer a how to for creating a page for information before the main menu (like those FBI notices) if you thought that might be appropriate for any overview trip descriptions per disk. Lots of details, Lots of choices, but often with limitations and special considerations if you are restricted to what comes as is with the program.
Please review the above and then we could fine tune with more specifics.
Thanks.
ATR

I want a rectangular frame round part of image to draw attention to it?

Similar Messages

Maybe you are looking for