I want a static background, but when I import a frame from livetype all I..

Get is a black background. I am using the space travel background in livetype. I export the current frame, but when I try to use the frame, ie extending it to the length I want, it just shows up as a black background w/ out the stars.
Any way I can do this, or do you know of any good FCE tuts that can help?
Thanks.

I see what you did. When you applied the texture it defaults to applying into the background. It's below the gray separator bar in the LT timeline. Then it's only background. It's not part of the composition. If you want to see it on export drag the texture onto the track above the background bar and hen export it.

Similar Messages

TS1814 I have a 4th gen. IPod Touch with IOS4 and i want to update it, but when I hit the Update button its says "contacting the IPod software server" and then after about 5 seconds it says "ITunes could not connect to the IPod software servers". Please h

I have a 4th gen. Itouch wiht IOS4 and i want to update it, but when i click the update button in ITunes it says "contacting IPod software server" and it looks like it is loading. However, after about 5 seconds it stops and says "ITunes could not connect to the IPod software server". I found the apple webpage that is supposed to help me, but when i went to the LAN settings in the control panel i found that 'Automatically detect settings" was already checked. I do not know what to do, Please help.

If yo mean the iPod will not connect to your wifi network:
Does the iPod connect to other networks?
Do other devices now connect?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I have an iphone 4, with ios 4.3.3. I want to update it but when I connect it to itunes it says that it is the latest version of the software. So I cannot update it, and I need it very bad. Can anyone help me?

I have an iphone 4, with ios 4.3.3. I want to update it but when I connect it to itunes it says that it is the latest version of the software. So I cannot update it, and I need it very bad. Can anyone help me?

What version of iTunes do you have installed? If you are trying to update to iOS 6 you need iTunes 10.7 or later.

I have apps that want to get updated but when i try to update them, the progress bar appears but also dissapeares again, the app isnt updated..

I have apps that want to get updated but when i try to update them, the progress bar appears but also dissapeares again, the app isnt updated..
I keep trying but i cant update the apps..

First reboot the iPad by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the phone by going to settings/general/reset/reset all settings

I have like a paper gift card i got with a purchase and it has "gift card number" and "pin" and i want to redeem it but when i go to redeem a gift card on itunes it says "code" i i don't have that! please help i want to redeem this

i have like a paper gift card i got with a purchase and it has "gift card number" and "pin" and i want to redeem it but when i go to redeem a gift card on itunes it says "code" i i don't have that! please help i want to redeem this

coIt is a code. See:
iTunes Store: How to redeem a code
Apple - iTunes - Inside iTunes - How to Redeem Free Download Codes and Gift Cards In the App Store and iTunes

HI everybody i want to ask if you come me in help, i want to draw paths but when i use stroke options with pen or brush settings i loose quality when i zoom in , can someone help me with pen settings???

HI everybody i want to ask if you come me in help, i want to draw paths but when i use stroke options with pen or brush settings i loose quality when i zoom in , can someone help me with pen settings???

The work path is a vector object, and infinitely scalable, but when you stroke it, Photoshop lays pixels on a layer that follow the path. These pixels are raster based and can not be scaled without loosing quality. You do have options. If you want to make the raster layer bigger, transform the work path and stroke it again. Or work at a higher resolution in the first place.
Incidentally, you can't stroke a Path with the Pen, because it is a Vector based tool, and stroking is a raster based function.

HT201210 i want to download ios6 but when i download it it gives me an error what shall i do???

i want to download ios6 but when i downloaded it gave me an error what shall i do ???

Please state what error.
If you are tryign to update in iTunes, update over Wi-Fi instead: Settings > General > Software Update.

HT1414 Ive got a iPod 3G running 4.2.1 and want to upgrade the OS, iTunes keeps saying its the latest version. Ive downloaded a 4.3.5.ipsw but when I try and restore from this iTunes says the firmware isn't compatible...any idea's what to do next?

iTunes keeps saying its the latest version. Ive downloaded a 4.3.5.ipsw but when I try and restore from this iTunes says the firmware isn't compatible...any idea's what to do next?

The iPod 3g will only support iOS up to 4.2.1 and nothing beyond that.
Allan

When looking at my "About This Mac" it says that I have 60gb of space left on my hard drive, but when I go into finder to find all of these files there is not 300gb worth in anything I search, even searching, "All files on the Mac". Help!?

When looking at my "About This Mac" it says that I have 60gb of space left on my hard drive, but when I go into finder to find all of these files there is not 300gb worth in anything I search, even searching, "All files on the Mac". Help!?
It says I have over 150 gigs of video on my hard drive. But I have gone through and deleted almost all of what shows up, still it says there is roughly the same amount on the hard drive. Where are these files? I want to delete them so I can have my hard drive clear.
Thanks for your help guys!

Quote from the article.
Time Machine in OS X Lion includes a new feature called "local snapshots" that keeps copies of files you create, modify or delete on your internal disk. Local snapshots compliment regular Time Machine backups (that are stored on your external disk or Time Capsule) giving you a "safety net" for times when you might be away from your external backup disk or Time Capsule and accidentally delete a file.
So what makes a notebook any different then a desktop, other then with a desktop you might have your tm backup drive connected all the time.
The object here is to not indiscriminately delete files you need or want to keep. I personally have never deleted a file I wanted to keep.
In essence a backup is for catastrophic failure of your system. So it can be restored once that failure has been fixed. Not because you go in willy nilly and start deleting files.

I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs

I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs then stops again!!! still annoying.
Can anyone assist me with this issue?
Thanks

To downgrade, you'll need to download the previous software version here: ATV3 http://appldnld.apple.com/AppleTV/041-4361.20120605.grjot/AppleTV3,1_5.0.2_9B830 _Restore.ipsw
ATV2: http://appldnld.apple.com/AppleTV/041-4362.20120605.t8i4U/AppleTV2,1_5.0.2_9B830 _Restore.ipsw
Next, plug the Apple TV into your computer with a micro-usb cable (most phones today use these) and start up Itunes. It should detect the Apple TV in recovery.
After that, hold down Option on Apple or Alt on Windows and click Restore. This should open a window that allows you to select the software update you want to apply. Select the one you downloaded earlier.
It will then go through the restore process, which takes only a few minutes, and then you will be able to plug the Apple TV back in to your display and set it up again.
I recently ran into a similar issue with a bunch of these things and after restoring them all to the previous software version they are working again.

HT4641 Hello there i am using the latest version of pages but when I imported a word do.ument with some figures ( mainly pictures, X-rays, CT scans, and ECG ) I could not find them they all vanishes although the text was perfectly displayed . Can anybody

Hello there i am using the latest version of pages on ipad3 but when I imported a word doument with some figures ( mainly pictures, X-rays, CT scans, and ECG ) I could not find them they all vanishes although the text was perfectly displayed . Can anyone help.
Thanks

Thank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM

I dont know how to get rid of the black bars on the sides of my videos. The original clips dont have them but when i import them to fcp it puts them there

The original clips dont have them but when i import them to fcp it puts black bars on the sides of my video and i cant get rid of them

Here's my final (and simple diagnosis) You have 4 x 3 footage that your are trying to screen at 16:9. This won't work.
Artistically, you have three options:
1.) Stay with the "black bars." What some of us call "Bat Wings," in the biz.
2.) Do what some editors do and create a large "fuzzy" background to extend the edges...
3.) Or transform / crop the image. (Or just use the "fill" option in the "Spatial Transform" section of the inspector
But... You WILL lose some of the image

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Help... Have ate in living room & bedroom & I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good & charged but the download took over 24 hours & only in the bedroom.... Please he

Help... Have ate in living room & bedroom & I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good & charged but the download took over 24 hours & only in the bedroom.... Please help

The remote app can either automatically find libraries available on a network (with home sharing available) or if you haven't got home sharing enabled, you can manually pair an itunes library with the remote app (using a number that is generated by the app and then typed into the itunes library).
That is why I am so confused, as it seems to be the home sharing that is the problem!

I am having trouble keeping the quality of my video when exporting to my external drive. I change the kind to "original" but when I view the video from the external drive once exported, the sound and picture are distorted.

I am having trouble keeping the quality of my video when exporting to my external hard drive. I have tried to export from iphoto with changing kind to "original" but when I open the video from the external drive the quality is effected. I have also tried copying the video to my desktop and then dragging and dropping onto the drive...same problem. Any suggestions? I would like to save everything to my external drive so that I can delete all of iphoto library and then reimport to correct a few things.

The file sizes are identical. In the finder I did a search for all .mov files. Then when they came up, I went through them and named each one so that they would be easier to find. I am a new mac user and am used to windows. I realized later that I should not have done this....with a mac files should be named within iphoto app...not finder....When I went to open the videos in iphoto, it wouldn't allow me. I had to go into finder, copy to desktop and reimport into iphoto. Then the videos worked again. However, I had the problem with the poor video quality when copied to external drive before that. Actually the first problem I had was when I copied to ext drive...videos were copying as an image...so I learned that you have to change "kind" to original before exporting....then that problem was solved...now they are videos, not images but not of a great quality. Skips, sound and images are not in sync...etc...

I want a static background, but when I import a frame from livetype all I..

Similar Messages

Maybe you are looking for