I want all ccms alerts come into my solution manager

Hello,
I want to monitor all the ccms alerts in all the systems from my solution manager.
We are using solmon (4.0) SP 14.
We are using ECC6, all systems in the landscape should configure to solmon
Like if any backgroind job fails it should come to somon alert inbox,if it coming near to any threshold i should get a alert in solmon alert in box,what ever it shows yellow or red ccms it should come to solmon
please help me in doing this
Regards
Mahesh

Mahesh,
That is possible with solution manager. You need to define system landscape and setup the system monitoring, central system administration.
Please check transactions codes SMSY, DSWP and SDCCN.
http://help.sap.com/saphelp_nw04/helpdata/en/02/5ec13690581b20e10000009b38f839/frameset.htm
http://service.sap.com/rkt-solman
Hope this helps.
Manoj Chintawar
Edited by: Manoj Chintawar on Mar 17, 2009 8:29 AM

Similar Messages

RFC at customer for EWA into our Solution Manager

Hi,
I have created a BACK RFC in a customer system to get EarlyWatch reports sent into our Solution Manager.There is no direct connection between the 2 systems, so I'm connecting via their SAPRouter and our SAPRouter.
In the customer system in SM59 I've set up :-
RFC SM_<SID>CLNT100_BACK where <SID> is our SolMan
Routestring i.e. Target Host.- /H/<customer_internal_SAPRouter_IP/S/sapdp99/H/VAR_external_SAPRouter_IP/S/sapdp99/H/VAR_internal_Solman_IP/S/sapgw00
Gateway Host - VAR_internal_Solman_IP
Gateway service - sapgw00
Question 1 - Does RFC and routestring look correct?
I've also modifed saprouttab on the customer side with the entry :-
P ... VAR_external_SAPRouter_IP 3299
And on our side with the entry :-
P * * 3300
Question 2 - Do both saprouttab entries look correct?
I've also asked for our external firewall to allow traffic from the customer IP to get to our SAPRouter server.
Also for the customer firewall to allow traffic to our external SAPRouter IP
Question 3 - Have I missed anything on these 2 firewalls?
Question 4 - After the traffic reaches our SAPRouter server, are any changes to our internal firewall required for it to get to our Solution Manager system?
Any help is much appreciated - at the moment when we test the RFC on the customer system we can see traffic from the customer reaching our SAPRouter server, but then get an error in dev_rfc0 :-
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2803
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=223
CPIC program connection ended (read error)
dev_rd shows :-
ERROR => NiBufIProcMsg: hdl 52 received rc=-93 (NIEROUT_INTERN) from peer [nibuf.cpp 2125]
Thanks,
Richard Shaw

Hi Anil,
Thanks a lot.
SAP provides the EWA report for all its clients production system without a Solution Manager system & not provide the sam for non productive system. That means to say that for quality & developement system SAP does not provide a EWA report without a SOLMAn. For this system you must required SOLMAN to generate the report.
Kind Regards,
Jitu

Wants - Create CCMS Alerts without using RWB

Hi,
I would like to create CCMS Alerts such as CPU performance, memory ect. ect. without using RWB
is that posible ? if yes how can i do that...
also I want to create CCMS alert will sent mail for different users, like memory alert sent to couple of users, and CPU performance alerts mail to different users like basis team...
Thanks in Advanced

Thanks for Accept my Eaddress, can I get your Eaddress please.... yahoo or msn
as you know that I am trying to create CCMS in XI 3.0 and its nothing any link with tcode: ALRTCATDEF
I am follow some sim.file / doc to setup CCMS to (Lotus notes)
I setup everything but alerts is not show in lotus notes
SAPconnect works fine, internal mails are working fine
I wana share with you guys, what i done yet
USER SETTING
1. in SU01 my user has my Eaddress on it
2. Comm. Meth mail
SMTP SETTING
1. SAP&CONNECTNET is actives and internet mail works
2. In SMTP setting mail host localhost and port: 25
3. Create background job every 5 munites
RZ21 METHOD SETTING
RZ21 --> copy Method CCMS_OnAlert_mail to TEST_CCMS_OnAlert_mail
in parameters tab: Sender: my user name
Recipient: myamil address
Recipient - typeid: U
In Release tab check autore action method
MTE CLASS
1. under SAP CCMS Monitor Templates --> Dialog overview --> dialog Response Time --> Server name --> properties
then double click MTE class, and in auto-reaction method name: TEST_CCMS_OnAlert_mail
2. Goback to MTE tree, click open alerts push button
3. its show 10 alerts when I click display alerts push button show 10 alerts and status "Action_Failed"
Question: why its not mail automatically, did i miss anything or will i need to change profile ?????
please i would like to setup only this thing
thanks

I want any CCMS Alert to mail

Hi,
I am looking any CCMS to mail such as 'SAP CCMS Template' --> Entire system --> XDV --> Application Server
OR
'SAP CCMS Template' --> Exchange Infrastructure --> XDV -->IEngine_XDV Integration Server --> System Errors
Thanks in Advanced

Hi,
Go through this..
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
we configure to Adapter Engine).
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
(This is Important)
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
/people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
Please reward points if it is useful...
Thanks,
Satya Kumar

Alert Mail configuration in Solution Manager 7.1 for Portal Runtime errors

Dear Friends,
We have EP7.01 SP5 installed on windows environment with Oracle DB. Also we have SAP EHP 1 for SAP Solution Manager 7.0.
Please help to provide steps to configure
proactive mail alert configuration ,
GRMG for High availability
Any portal runtime errors
for PORTAL services in Solution Manager.
Regards,
Venkat.

Hello Venkat,
You will have to include the Portal system in the Central System administration of your Solution Manager.
As the EP system will be monitored by a sapccmsr running with -j2ee option this one can be configured separately. The agent will be started using the monitoring segment of the J2EE instance and therefore can be started more than once.
Here you should also use the latest sapccmsr agents.
The following link provides details on the required agents:
http://help.sap.com/saphelp_nw2004s/helpdata/en/ca/118110ff542640b7c86b570cc61ae3/frameset.htm
Please refer the below notes.
214247 RZ20: Questions on configuration of monitoring data
704349 Activating the CCMS monitoring for TREX 6.1 (NW2004
Note the EP system can only be monitored by using the SAPCCMSR agents. and then by implement a central autoreaction method you can generate e-mails from CCMS.
Automatic emails will get generated when certain thresholds are met. You must configure the thresholds from the central monitoring system for the nodes that you want email to be generated.
Please follow the steps in the note to configure central auto reaction.
429265 CCMS monitor architecture: Central auto-reaction
In the central monitoring system ( Solution Manager in your case ), Goto RZ20, choose the monitor for the nodes that you are monitoring. Select the node, click properties, & check the threshold values.
Also refer to the following notes:
547024 - Transfer the EP 5.0 Monitoring-Data to SAP CCMS
644783 -P 6.0 Monitoring via CCMS / SolMan
Also, check the following link that has information on portal monitoring :
http://service.sap.com/~sapidb/011000358700002004322004E
I guess this is a whole lot of information to assimilate and will be helpful to you to setup what you intend to.
Regards
Amit

Trigger alert on yellow in Solution Manager

Can somebody tell me how I can trigger an alert on yellow in business process monitoring in solution manager?
Useful answers will be rewarded.
Alessia

Hello Venkat,
You will have to include the Portal system in the Central System administration of your Solution Manager.
As the EP system will be monitored by a sapccmsr running with -j2ee option this one can be configured separately. The agent will be started using the monitoring segment of the J2EE instance and therefore can be started more than once.
Here you should also use the latest sapccmsr agents.
The following link provides details on the required agents:
http://help.sap.com/saphelp_nw2004s/helpdata/en/ca/118110ff542640b7c86b570cc61ae3/frameset.htm
Please refer the below notes.
214247 RZ20: Questions on configuration of monitoring data
704349 Activating the CCMS monitoring for TREX 6.1 (NW2004
Note the EP system can only be monitored by using the SAPCCMSR agents. and then by implement a central autoreaction method you can generate e-mails from CCMS.
Automatic emails will get generated when certain thresholds are met. You must configure the thresholds from the central monitoring system for the nodes that you want email to be generated.
Please follow the steps in the note to configure central auto reaction.
429265 CCMS monitor architecture: Central auto-reaction
In the central monitoring system ( Solution Manager in your case ), Goto RZ20, choose the monitor for the nodes that you are monitoring. Select the node, click properties, & check the threshold values.
Also refer to the following notes:
547024 - Transfer the EP 5.0 Monitoring-Data to SAP CCMS
644783 -P 6.0 Monitoring via CCMS / SolMan
Also, check the following link that has information on portal monitoring :
http://service.sap.com/~sapidb/011000358700002004322004E
I guess this is a whole lot of information to assimilate and will be helpful to you to setup what you intend to.
Regards
Amit

Link one solution manager word document into another solution manager HTML

Hi,
I have requirement in solution manager that there are two documents uploaded into solution manager.
1. One word document in one of the project folder
2. HTML page in another folder of same project
I have to set up a hyper link of word document in the HTML web page.
If anyone has gone through this type of requirement, please let me know the details of how did you set up the link between word and HTML document.
Appreciate the early response.
Thanks,
Siva

Go to the properties of the file you want to link your word document to. (attributes icon)
There you will find a button "Generate Document URL (F9)". Clicking this button will buffer the URL into clipboard.
Then you open your Word document in edit mode and paste the URL there.
source: Inserting a document into another in Solution Manager

CCMS alert texts

Hi Guys,
ANy idea how to read the CCMS alert texts into an ABAP program?
Need to capture the alert texts of a red alert in CCMS and display via a program.
pls help.
Will reward points if useful.
Thanks a lot
Leeza

Hi,
Check these link,
http://help.sap.com/saphelp_sm32/helpdata/EN/d7/28cbcf6dfd455ca8257bf5939a7c48/content.htm
http://help.sap.com/saphelp_sm32/helpdata/EN/d1/3b17419b24f06fe10000000a1550b0/content.htm
This should help.
Feel free to revert back.
-=-Ragu

CCMS - Alert monitor configuration

Hi
We are configuring the CCMS Alert monitor for monitoring the R/3 systems. We are referring sap help and sap notes, but also we are looking for document which instructs the complete configuration, will be appreciated if share the same.
regards,
rajesh

Hi rajesh,
Have you checked the iTutor files in
http://service.sap.com/rkt --> SAP Solution Manager 4.0 --> Technology Consultants and System Administr
These are really good documents with step by step instuctions and screen
Thanks
Prince Jose

Question about Alert Framework in Solution Manager

Hi all,
We are planning to use Solution Manager as Central Monitoring Server, so I want to know what the advantage to use Solution Manager is, especially in Alerting.
We can define auto-reaction methods for monitors to send CCMS alerts to Alert Framework where the alerts can be forwarded to the personal responsible via Email or CCMS.
Is there any difference when using Solution Manager? Which additional functions dose Solution Manager provide in alerting?
In normal SAP Alert Framework, you can only define one receipt for escalation. Can Solution Manager support multiple level escalation? For example, an alert is sent to A, if the Alert is not confirmed by A, then the alert is forwarded to B automatically. The same way the alert can be forwarded to further persons.
Any idea?
Thanks!
Regards,
Hui

Hi Hui,
On my opinion there is no any advantage in useíng SAP Solution Manager as central alerting systems in respect to RZ20. The arguments are as follows:
- in SAP Solution Mnager you have performance restrictions on number of alerts to be displayed in one screen caused by the fact that the alerts are displayed in HTTP format
- All the customizing in SAP Solution Manager for System Monitoring is Solution specific and not transportable. It means that if you have got corrupted your system monitoring session (that happens not seldom) your settings are lost. If you have created another Solution for the same systems you have to perform customizing from the scratch
- Customizing is also not very esay to do. I would do recommend to use "User defined Alerts" Please have a look at the SAP Note 1023959 fro this topc
- SAP Solution Manager does not provide alerting mechanism -> you have to relay to ALM in any case. Here by the way to your second question I would say that it is possible implement exactly process you have described. In the ALM category you can use button escallation to define another person that would be informed via e-mail in case the first Recipient have not completed alert from this category within predefined time
+ The only feature that is unique with System Monitoring with SAP Solution Mnager is the possibility to change threshold values for all the MTEs / MTE Classes that are defined in User Define Alerts an one button click
At the conclussion I would say that there are some custommers that are using SM as monitoring platform But more pragmatical would be to configure RZ20 with help of Rule-based alerts and self- defined system groups and use ALM as alerting infrastructure. In this case you can save in plain XML file your Alert configuration and export it in any other system. ALM has on my opinion enogh functionality for alerting
Best Regards
Andrey

Solution manager and CCMS monitoring of remote database

I have Solution Manager 7 SP Basis 6 installed. I have oracle remote databases connected successfully. Under DBCockpit I see the instances I want to monitor. I can see the backup, tablespaces, etc. These remote instances are SAP Portal JAVA only version 7 but under the dbcockpit alerts only shows alert monitor. The database check and check conditions are in white. Is there a way to see these and be able to report on them? The CCMS tree under the local solution manager also shows these connected remote instances but they are also white in color as if inactive. All CCMS agents and saposcol are running perfectly on the remote systems. The stats tables have been built, the synonyms for the solution manager are in place. What am I missing?

Hi,
Please download that attachment "scripts_1139623.sar" provided in SAP Note 1139623 - Using transaction RZ20 to monitor remote Oracle databases.
Upon extraction of scripts_1139623.sar the following files you will get.
rz20_nonabap.sql
dbcheckora10_oltp.sql
dbcheckora.sql
Then Perform the below mentioned Steps to resolve your issue.
Step 1: Create tables DBCHECKORA and DBMSGORA:
sqlplus SAPSR3DB/<pwd>
SQL> @rz20_nonabap.sql
Step 2: Fill the table DBCHECKORA:
sqlplus SAPSR3DB/<pwd>
SQL> @dbcheckora10_oltp
Step 3: Create the synonyms (as user ora<sid>):
brconnect -u / -c -f crsyn -o SAPSR3DB
sqlplus "/as sysdba"
CREATE PUBLIC SYNONYM SAP_DBSTATC FOR SAPSR3DB.DBSTATC;
CREATE PUBLIC SYNONYM SAP_DBCHECKORA FOR SAPSR3DB.DBCHECKORA;
CREATE PUBLIC SYNONYM SAP_DBMSGORA FOR SAPSR3DB.DBMSGORA;
Step 4: Grant Privileges for OPS$<SID>ADM User for the above created Tables
sqlplus "/as sysdba"
grant all on SAPSR3DB.DBSTATC to OPS$<SID>ADM;
grant all on SAPSR3DB.DBCHECKORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBMSGORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTAIHORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATHORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATIORA to OPS$<SID>ADM;
grant all on SAPSR3DB.DBSTATTORA to OPS$<SID>ADM;
commit;
Step 5:
Now after successful execution of above mentioned Steps , in DBACOCKPIT (system configuration), try to save the Remote DB entry with "Collect Alert Data". It will be saved without any error.
If you find any errors, post the error contents as a reply of this thread message.
Regards,
Bhavik G. Shroff

Solution Manager Setup System Monitoring DB Administrating Alerts

Greetings experts
Can someone please explain how I can get "DB Administrating Alerts" to display in Solution Manager.
Satellite system (FSD) database MTE's are all active (RZ20).
Tcode: DSWP / tab:Solution Monitoring / tab:System Monitoring /
Service: Setup System Monitoring
Tree:
Setup System Monitoring
                       +--> SAP System FSD 1320011126
                                                         +--> Database FSD-DATABASE
|
                                                                                +--> Administrating DB FSD-DATABASE (DB2 6000)
Issue: DB Administrating Alerts do not display.
*Solution Manager 7.01 SP3 / DB2 09.05.0002 / AIX5.3
Regards
Peter Babbington

HI
1.Do i need to configure the CCMS_OnAlert_Email, for every alert that you have, in the satellite system?
Best thing I would say is to copy method ( RZ21 --> Method --> Method definition )CCMS_OnAlert_Email to Z_CCMS_OnAlert_Email in Solman and assign this auto reaction to MTE class of satellite systems.
2. How do i configure this out of solution manager, and bypassing the satellite system?
You have to install/configure sapccm4x( for monitoring abap ) on satellite systems by giving details about Solution manager. Then the alert will be sent to Solution manager from satellite system and the configured auto reaction will send mails .
Also go through the links
http://service.sap.com/moniotring
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
http://service.sap.com/rkt --> Solution manager --> Solman Manager < rel > --> Technology Consultants and System Administrator
Thanks
Prince Jose

QADB Installation into Solution Manager

Hello, Please help me to find out the QADB for different SAP modules, and please guide me how to install it into the solution manager.
Thanks,
Joby

The portal is a big resource consuming application, SolMan comes with a J2EE engine but this is used for SolMan Diagnostics.
You can install a portal on the system in the same database (using MCOD) or install a second database and use the Netweaver CDs to install it. However, make sure you are using a box, that has enough memory to support all that.
Markus

Migrate eCATTs into Solution Manager.

Hi.
For historical reasons all our eCATTs are located in another system than the Solution Manager system.
Since introduction of the Solution Manager, this has always introduced limitations, errors and other challenges when working with testing.
Now I am wondering if anyone knows a method to migrate the eCATT test cases from the other system, into the Solution Manager system?
Thanks in advance!
Best regards
Per Christiansen

Hi Per,
to migrate eCATTs ? It is not necessary that the eCATT have to be in Solution Manager to use them. IN SOLAR_PROJECT_ADMIN you can define per project where the tool should look for same objects like eCATTS, you can say local or remote in an other system, you can say optional or mandatory.
I recommend to store eCATTs in the system with the highest SAP_BASIS, ok SolMan 4.0 has SAP_BASIS 7.0 this is quiet good. Then all infos are stored centrally which also makes sense.
So if you want to transport eCATTs to SolMan, where is the problem ? eCATTs have a package assigned, so you can put them on a transport request and import them into SolMan. If you have stored them as local objects, you can go to SE03 and change the package assignment to a package you can transport. I think this should help you. If you also want to transport the old eCATT results, I think this is not supported
Regards,
Udo

How to Import Roadmaps into Solution Manager V7.0 EHP1.0

Hi All,
The latest ASAP implementation roadmap is currently;
ASAP Implementation V3.9 January 2009
However, when I go into our install SolMan (V7.0 EHP1.0 SP 19) the latest version I can see is ;
ASAP Implementation V3.8 January 2008.
My admin has informed me we are fully patched with all service packs applied and EHP applied.
How do I:
a.) Get a "install file" for the V3.9 roadmap?
b.) "Import" the Roadmap V3.9 into Solman?
Many Thanks

Hi Waseem,
Thanks for your reply. I have already been able to do this. The document you provided shows how to download the HTML version of the Roadmap and install to a local or network physical drive. I am after how to get the Roadmap I have mentioned into SAP Solution Manager so that I can select and use it on my projects.
Cheers
Edited by: bigaikes on Jul 1, 2009 1:45 AM

I want all ccms alerts come into my solution manager

Similar Messages

Maybe you are looking for