I want claim code

i want claim code

sanjeev1 wrote:
i want claim code
Hi,
Sorry we don't have one. It will be sent to your printer. What is your printer ? Please use the following way to find out:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03550536
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

I want mdiwindow code

Hi Friends,
I need window with minimize ,maximize,close,draggable in flex 4..I think everthing possible in mdiwindow but i don't mdiwindow how to use also ,so please any one help to me how to solve the problem as well as help to me how to use mdiwindow in my application of flex 4 with code.
Thanks & Regards,
Magesh R.

sanjeev1 wrote:
i want claim code
Hi,
Sorry we don't have one. It will be sent to your printer. What is your printer ? Please use the following way to find out:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03550536
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I can't print out my claim code for my HPDeskjet 2540 All-In-One printer.

So i have been trying to get the claim code for my printer for the past hour and i seem to not be able to get the code. I want to set up my printer with eprint but in order for me to be abe to get theoption i got to input the claim, which i cant print or get any where. I have tried calling HP cloud service and waited for like 20mins just for them to tell me to call back tomorrow. If any one can help me in showing me how to get the code will be reatly appriciated. Thanks.

Hi,
Given your printer has a claim code, please ue the following method:
Option one: If you see an ePrint buttonOn the printer control panel, press the ePrint ( ) button to open the Web Services menu.
If Web Services is enabled , touch Print Info . An information sheet prints that has your claim code.
If Web Services is not enabled , touch OK to accept the terms of service, and then touch OK to accept the update. An information sheet prints that has your claim code.
Option two: If you see a Setup iconOn the printer control panel, touch Setup ( ), and then touch Web Services Settings .
If Web Services is enabled , touch Print Info . An information sheet prints that has your claim code.
If Web Services is not enabled , touch Continue , touch Yes to accept the terms of service, touch Yes to accept the update, and then touch Print Info . An information sheet prints that has your claim code.
Source: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03550536#N79
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

[Printer Claim Code]

i want to register so i my be able to print pictures on my lap top. [accyn93enu52]

Hi cricket_1,
Welcome to the HP Support forums. I understand that you would like to learn how to set up the ePrint feature of your printer.
You didn't indicate which HP printer you have so the information I have will be general in nature. I have including the document on how to get your printer claim code as I suspect yours has probably expired. I have asked the Moderator to remove your claim code in the topic thread. After getting a claim code you'll want to setup your printer's ePrint email address. I've also included a document on how to do that.
Getting the Printer Claim Code
Setting Up a Custom Email Address for ePrint
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Have claim code, can't connect!

I'm setting up my new Photosmart 5520. It printed me a sheet with a claim code for HP Connected.
I went on line and discovered that this only exists for USA and UK - I live in Luxembourg. Apparently I need to use ePrint.
I tried to set up an ePrint account and it takes me to a screen that asks for a Snapfish password. I don't have a Snapfish account. I don't want or need a Snapfish account. I just want to connect and enter my claim code, which runs out in less than 24 hours.
Please explain what I should do.
Thanks in advance,
Naomi
PS the page for Luxembourg is in French, but this is no problem.

Hi,
You can use HP Connected in the US. Me too, I live in Australia and I have to use HP Connted in the US for my loan printers (old and new).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have a balance on my itunes account that I want to use but it wants a code (because of a new phone), the card is gone. how do I use my balance?

I have a balance on my itunes account that I wan to use before it expires. I have a new computer and new iphone, so itunes wants a code from the back of the card. The card is long gone. How do I use my balance without this code?

As I said, some items cannot be purchased with an existing credit on an account no matter how much it is. It can only be purchased with a charge to a credit card.

Cant find HP Web services tab to find claim code

Hi
I am trying to set up HP ePrint on my HP Laserjet M1522nf printer connected to my home network. I am unable to find the claim code for my printer to set up the device on HP connected services.
I have entered the IP address on my web browser and entered the printer's configuration tab but i am unable to find the web services tab or the print info page for the claim code.
Please let me know how to find the claim code so that i could set up ePrint.
Thanks
Harish
This question was solved.
View Solution.

Ok judt realised this device is not eprint ready.
Please ignore my earlier post.

How to print claim code for envy 5530 without connecting to internet?

how to print claim code for hp envy 5530 without connecting to internet. We do not have wireless internet and we are trying to set up the eprint app for our samsun android phones and ipad. We need to print off the claim code from the printer but it seems we need to have internet for that. is there any way around that?
Thanks

Hi,
You have to, without connecting to the internet, the claim code (if you can get one) is useless.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to Print a Web Services Information Sheet to Obtain a Claim Code

I'm trying to add a HP LaserJet Pro 200 color MFP m276nw as an ePrint device. I've successfully updated the printer firmware. When I enable the web services the Print Information Sheet button appears, but nothing prints when I click it and I'm unable to obtain a claim code.
I'm stuck. I'm not sure where to go from here...
This question was solved.
View Solution.

If you have successfully enable web services, you have a couple of options:
1. use your IP address, input it into your web browser and browse to the embedded web page. Go to the web services tab and find the email address assigned to your printer. It should be something like [email protected] The printer code will be everything before the @ sign.
2. Go to your control panel. Click on the web services icon (icon on the far left). Click on display email addres. Printer code will be everything before the @ sign.
3. Print a configuration page. Tools icon - reports - config page. In the right column, locate HP Web Service (bottom right) - printer email address - printer code will be everything before the @ sign.
Use the xxxxxx before the @ sign for the printer code to register the printer at HP Connected.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Printer claim code, printer laserjet 600

Hi,
To get the printer claim code, I enter the IP address listed on the configuration page but I keep getting "problem loading page," so I cannot connect to the HP Embedded Web Server. I've triple-checked the IP address so I know I'm not entering it in wrong.
Please help.

Hi,
Please use the following setup to get claim code:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03550536#N304
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I can't get my printer to print out the claim code. HP7520-e All in one

Whenever I press the web icon on my printer, it gives me the printers email address, but there is no place to press to get it to print out a claim code.

I can't get my HP Photosmart 7520 e-All-in-One to print out the claim code, either. I have had problems ever since they switched from ePrintCenter to HP Connected.
This is my second HP Photosmart 7520 e-All-in-One, the first one quit printing and they said I would have to buy a new Printhead Assembly ($73.30), and throw away my partially used ink cartridges and buy new ones ($104 to replace my 5 HP 564XL High Yield Original Ink Cartridges!) It made more sense to buy whole a new printer for $200!
A. I found it at <http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03379963&lc=en&product=5199463&tmp... under FAQs !!!
Truncated piece: product=5199463&tmp_track_link=ot_search#N632>
See below:
=======================================================================================
What if I lose my printer code before registering?
If you lose your printer code before registering your printer, you can print a new information page to secure a new printer code. Use the following steps to disable and re-enable Web Services to print a new information page.
On the printer control panel, touch the Web Services icon (). The Web Services window opens.
Touch Settings, touch Remove Web Services, and then touch Yes.
Touch the Web Services icon () again. The Web Services window opens.
Touch Settings, and then touch Enable Web Services.
Touch Yes to accept the terms of use. The printer prints an information page.
If the printer does not print an information page, touch Print Report.
NOTE:The information page contains the printer claim code that you use to register your printer.
=======================================================================================
It printed out a page titled: Make the Most of Your Printer
The printer's claim code is in item number 3.

The claim code was changed

I just bought a 4625 printer. During the installation process a claim code was generated. After that I changed the printer email address. Two days later by some reason (I don't know what I did) a new claim code was generated. When I tried to print a document, sending it to the email address, the printer doesn't work. In that moment I realize that the printer email address was changed too. Then I tried to change the email address to the ones I assigned the first day, but the system doesn't allow me because he said it was not free. I have to choose another one. My question is how can I rename my second email address to the first one.
This question was solved.
View Solution.

Hi, javier64.
Some sort of reset, other than a network reset, had to be done to the printer in order for it to lose it's email address and print out a new code. Currently, "old" email addresses are locked out for six months. You should be able to change the email back to the original address at that time.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided.
Although I work for HP, my posts and replies are my own opinion and not those of HP.

I want complete code of mm01 using bapi's

hi experts!
my requirements is upload material master data using bapi....
i want complete code of mm01 ......i have no idea of bapi
pls help me anybody...............................

Dear Shilpa,
Please go through the following link:
https://www.sdn.sap.com/irj/sdn/wiki
Tutorial, MM01 Upload using BAPI
Author: Karthik Potharaju
Submitted: 28.09.07
*& Report ZKAR_MATMAS_BAPI
*& This program demonstrates how easy it is to create Material master
*& data using BAPI_MATERIAL_SAVEDATA
*& The program also generates a report post-execution displaying errors
*& as well as successful uploads
*& Written by: Karthik Potharaju
*& URL: http://allaboutsap.blogspot.com
REPORT ZKAR_MATMAS_BAPI.
TABLES
FLAGS *
DATA: F_STOP. " Flag used to stop processing
DATA DECLARATIONS *
DATA : V_EMPTY TYPE I, " No. of empty records
V_TOTAL TYPE I. " Total no. of records.
STRUCTURES & INTERNAL TABLES
*--- BAPI structures
DATA: BAPI_HEAD LIKE BAPIMATHEAD, " Header Segment with Control Information
BAPI_MAKT LIKE BAPI_MAKT, " Material Description
BAPI_MARA1 LIKE BAPI_MARA, " Client Data
BAPI_MARAX LIKE BAPI_MARAX, " Checkbox Structure for BAPI_MARA
BAPI_MARC1 LIKE BAPI_MARC, " Plant View
BAPI_MARCX LIKE BAPI_MARCX, " Checkbox Structure for BAPI_MARC
BAPI_MBEW1 LIKE BAPI_MBEW, " Accounting View
BAPI_MBEWX LIKE BAPI_MBEWX, " Checkbox Structure for BAPI_MBEW
BAPI_RETURN LIKE BAPIRET2. " Return Parameter
*--- Internal table to hold excel file data
DATA: IT_INTERN TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
*--- Internal table to hold Matetrial descriptions
DATA: BEGIN OF IT_MAKT OCCURS 100.
INCLUDE STRUCTURE BAPI_MAKT.
DATA: END OF IT_MAKT.
*--- Internal to hold the records in the text file
DATA : BEGIN OF IT_DATA OCCURS 100,
WERKS(4), " Plant
MTART(4), " Material type
MATNR(18), " Material number
MATKL(9) , " Material group
MBRSH(1), " Industry sector
MEINS(3), " Base unit of measure
GEWEI(3), " Weight Unit
SPART(2), " Division
EKGRP(3), " Purchasing group
VPRSV(1), " Price control indicator
STPRS(12), " Standard price
PEINH(3), " Price unit
SPRAS(2), " Language key
MAKTX(40), " Material description
END OF IT_DATA.
SELECTION SCREEN. *
SELECTION-SCREEN BEGIN OF BLOCK SCR1 WITH FRAME TITLE TEXT-111.
PARAMETER : P_FILE TYPE RLGRAP-FILENAME OBLIGATORY DEFAULT " Input File
'C:Material_master.XLS'.
PARAMETER : P_MAX(4) OBLIGATORY DEFAULT '100'. " no.of recs in a session
PARAMETERS: P_HEADER TYPE I DEFAULT 0. " Header Lines
PARAMETERS: P_BEGCOL TYPE I DEFAULT 1 NO-DISPLAY,
P_BEGROW TYPE I DEFAULT 1 NO-DISPLAY,
P_ENDCOL TYPE I DEFAULT 100 NO-DISPLAY,
P_ENDROW TYPE I DEFAULT 32000 NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK SCR1.
AT SELECTION-SCREEN *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*--- Validating file
PERFORM VALIDATE_FILE USING P_FILE.
START-OF-SELECTION
START-OF-SELECTION.
*--- Perform to convert the Excel data into an internal table
PERFORM CONVERT_XLS_ITAB.
IF NOT IT_DATA[] IS INITIAL.
*--- Perform to delete Header lines
PERFORM DELETE_HEADER_EMPTY_RECS.
ENDIF.
END OF SELECTION. *
END-OF-SELECTION.
*--- Perform to upload Material Master data
PERFORM UPLOAD_MATMAS.
Form : validate_input_file
Description : To provide F4 help for file if read from PC
FORM VALIDATE_FILE USING F_FILE TYPE RLGRAP-FILENAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
CHANGING
FILE_NAME = F_FILE
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE S010(ZLKPL_MSGCLASS). " 'Error in getting filename'.
ENDIF.
ENDFORM. " validate_input_file
*& Form CONVER_XLS_ITAB
text
FORM CONVERT_XLS_ITAB.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_FILE
I_BEGIN_COL = P_BEGCOL
I_BEGIN_ROW = P_BEGROW
I_END_COL = P_ENDCOL
I_END_ROW = P_ENDROW
TABLES
INTERN = IT_INTERN.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*--- Perform to move the data into an internal data
PERFORM MOVE_DATA.
ENDFORM. " CONVERT_XLS_ITAB
*& Form MOVE_DATA
text
FORM MOVE_DATA.
DATA : LV_INDEX TYPE I.
FIELD-SYMBOLS <FS>.
*--- Sorting the internal table
SORT IT_INTERN BY ROW COL.
CLEAR IT_INTERN.
LOOP AT IT_INTERN.
MOVE IT_INTERN-COL TO LV_INDEX.
*--- Assigning the each record to an internal table row
ASSIGN COMPONENT LV_INDEX OF STRUCTURE IT_DATA TO <FS>.
*--- Asigning the field value to a field symbol
MOVE IT_INTERN-VALUE TO <FS>.
AT END OF ROW.
APPEND IT_DATA.
CLEAR IT_DATA.
ENDAT.
ENDLOOP.
ENDFORM. " MOVE_DATA
*& Form DELETE_HEADER_EMPTY_RECS
To delete the Header and empty records
FORM DELETE_HEADER_EMPTY_RECS.
DATA: LV_TABIX LIKE SY-TABIX.
IF NOT P_HEADER IS INITIAL.
LOOP AT IT_DATA.
IF P_HEADER > 0 AND NOT IT_DATA IS INITIAL.
DELETE IT_DATA FROM 1 TO P_HEADER.
P_HEADER = 0.
EXIT.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR IT_DATA.
*--- To delete the empty lines from internal table
LOOP AT IT_DATA.
LV_TABIX = SY-TABIX.
IF IT_DATA IS INITIAL.
V_EMPTY = V_EMPTY + 1.
DELETE IT_DATA INDEX LV_TABIX..
ENDIF.
ENDLOOP.
CLEAR IT_DATA.
*--- Total no of recs in file
DESCRIBE TABLE IT_DATA LINES V_TOTAL.
IF V_TOTAL = 0.
MESSAGE I013(ZLKPL_MSGCLASS). " No records in the file
F_STOP = 'X'.
STOP.
ENDIF.
ENDFORM. " DELETE_HEADER_EMPTY_RECS
*& Form UPLOAD_MATMAS
to upload Material Master data
FORM UPLOAD_MATMAS .
LOOP AT IT_DATA.
Header
BAPI_HEAD-MATERIAL = IT_DATA-MATNR.
BAPI_HEAD-IND_SECTOR = IT_DATA-MBRSH.
BAPI_HEAD-MATL_TYPE = IT_DATA-MTART.
BAPI_HEAD-BASIC_VIEW = 'X'.
BAPI_HEAD-PURCHASE_VIEW = 'X'.
BAPI_HEAD-ACCOUNT_VIEW = 'X'.
Material Description
REFRESH IT_MAKT.
IT_MAKT-LANGU = IT_DATA-SPRAS.
IT_MAKT-MATL_DESC = IT_DATA-MAKTX.
APPEND IT_MAKT.
Client Data - Basic
BAPI_MARA1-MATL_GROUP = IT_DATA-MATKL.
BAPI_MARA1-BASE_UOM = IT_DATA-MEINS.
BAPI_MARA1-UNIT_OF_WT = IT_DATA-GEWEI.
BAPI_MARA1-DIVISION = IT_DATA-SPART.
BAPI_MARAX-MATL_GROUP = 'X'.
BAPI_MARAX-BASE_UOM = 'X'.
BAPI_MARAX-UNIT_OF_WT = 'X'.
BAPI_MARAX-DIVISION = 'X'.
Plant - Purchasing
BAPI_MARC1-PLANT = IT_DATA-WERKS.
BAPI_MARC1-PUR_GROUP = IT_DATA-EKGRP.
BAPI_MARCX-PLANT = IT_DATA-WERKS.
BAPI_MARCX-PUR_GROUP = 'X'.
Accounting
BAPI_MBEW1-VAL_AREA = IT_DATA-WERKS.
BAPI_MBEW1-PRICE_CTRL = IT_DATA-VPRSV.
BAPI_MBEW1-STD_PRICE = IT_DATA-STPRS.
BAPI_MBEW1-PRICE_UNIT = IT_DATA-PEINH.
BAPI_MBEWX-VAL_AREA = IT_DATA-WERKS.
BAPI_MBEWX-PRICE_CTRL = 'X'.
BAPI_MBEWX-STD_PRICE = 'X'.
BAPI_MBEWX-PRICE_UNIT = 'X'.
*--- BAPI to create material
call function 'BAPI_MATERIAL_SAVEDATA'
exporting
HEADDATA = BAPI_HEAD
CLIENTDATA = BAPI_MARA1
CLIENTDATAX = BAPI_MARAX
PLANTDATA = BAPI_MARC1
PLANTDATAX = BAPI_MARCX
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
STORAGELOCATIONDATA =
STORAGELOCATIONDATAX =
VALUATIONDATA = BAPI_MBEW1
VALUATIONDATAX = BAPI_MBEWX
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA = BAPI_MVKE1
SALESDATAX = BAPI_MVKEX
STORAGETYPEDATA =
STORAGETYPEDATAX =
IMPORTING
RETURN = BAPI_RETURN
TABLES
MATERIALDESCRIPTION = IT_MAKT
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
IF BAPI_RETURN-TYPE = 'E'.
WRITE:/ 'Error:' ,BAPI_RETURN-MESSAGE ,'for material:' ,it_data-matnr.
ELSEIF BAPI_RETURN-TYPE = 'S'.
WRITE: 'Successfully created material' ,it_data-matnr.
ENDIF.
ENDLOOP.
ENDFORM. " UPLOAD_MATMAS
Regards,
Abir
Don't forget to Reward Points *

Want a code to check & install JRE automaticallly without user intervention

hi
I am trying to run an applet on a machine that is not having JRE on it.
want a code that will check for such condition and install JRE automatically.
If JRE is already present then it should check for required version and enable it also.
please help in this regard.
thanks in advance
Santosh.

The ability to detect the jre at the update level, as well as the ability to install a specific version are only present if the DT plugins are installed.
These plugins only exist for windows and are only part of the 6u10 (1.6.0_10) versions of java.
The javascript you show uses an undefined minimumVersion variable.
also note, you cannot use the wildcard '1.5.0*' in the call to isWebStartInstalled (which takes minimumVersion arg)
if fixed, this code would still not work as you want, since clients with 1.6.0 or later would sail straight thru and launch.
I suggest replacing isWebStartInstalled() with deployJava.versionCheck('1.5.0*') .
then on systems with the plugin installed, if no 1.5.0* version is installed, the latest 1.5.0_XX will be installed before launching the app.
(assuming the app has also <j2se version=1.5/> or equiv.)
on systems w/o plugins installed, the latest version of java will be installed, and it will be up to javaws auto download to get 1.5.0* version.
this could still have problems, especially on platforms not supporting the plugins (non-windows) , since code keeps checking for '1.5.0*', and installing only latest, so you would want to wrap install with something to prevent repeated attempts to install:
if (deployJava.versionCheck('1.6.0+') && !deployJava.isPluginInstalled()) {
---- don't do any install here - ---
/Andy

Want t-codes

Hi
I want T codes for following-
1.Vendor list for company code.
2.Material code list with price mentioned in material master.

Hi,
in MM60 you will get all materials for V/S prices..
Better down load from MBEW table..
in the main screen you can choose the fields for V/S
through Settings on top..
for Vendors use LFA1 & LFB1 tables
Thx
Raju

I want claim code

Similar Messages

Maybe you are looking for