I want Data flow Co with SD and MM

My dear Friends,
I want Data flow Co with SD and MM with examples please..
Ashok kumar
Email: [email protected]

Similar Messages

Data Flow task with error redirection hangs

I am migrating an SSIS package from 2005 to 2012. I have a package that, among other things, contains a data flow task with redirects. The source is a flat file pipe delimited that we receive from an outside source. The file contains a
bunch of bad data including empty lines. I redirect the bad rows so I can provide an audit back to the list provider. The file has about 300 k rows. Since I have completed the migration wizard, the data flow task stalls at 72,173 rows. I
can change the number of rows that get loaded by changing the DefaultBufferMaxRows and DefaultBufferSize values but I can't get it anywhere near 300K. I decided to try rebuilding the data flow task from scratch and found that if I set it to ignore all
errors, the entire file will load but when I add the redirect it hangs and does not give me any errors.
I am currently running it in debug mode from Visual Studio. I have not tried running it from the SS agent yet.
Any help would be greatly appreciated. I would like to keep the error redirects if at all possible for audit reasons.
Thanks in Advance.
Alan

The error says it stopped on row 45200 and that the column AgentIdentifier returned status value 4 "Text was truncated..." This is one of the errors that I have to trap for. The field preceding AgentIdentifier is a remarks field that typically
contains embedded pipe characters that throw off the rest of the row. There are some other errors that I typically find in the data file but that one is the most frequent and is why I have to redirect so I can report back to the client what rows they
need to fix.
Thanks for the suggestion.

Data flow in R/3 and CRM

Hi experts
I am bit confused about the data flow in source systems moving to Delta queue even though i know bits and pices but not able to relate and keep them in order.
First Scenario- R/3
When we save a transaction or create a sales order by V1 it will go to Database tables and then through V1 it will reach the Extraction queue or Update tables based on the delta method we select or else if direct delta it will go directly to the Delta queue which is nothing but QRFCOUT AND ARFCQUEUE tables.
in SM53 we can check the transfer of data records from this delta queue to BW.
Is my understanding right on the R/3.
Second scenario- CRM
when we save a transaction lets take an example of Activity creation how does this pass to Delta queue and to the Database tables and is their a intermidate place where we can check the data in between the Transaction creation and till the Delta Queue of CRM.
thanks and regards
Neel

Hi Rahul,
Execute Transaction: CRMC_R3_ORG_GENERATE
Select the org u want to copy to CRM.
Click on 'Generate Selected Lines'.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

Uk date format issue with ASP and Access Database

I have an Asp form which updates records in an Access
database. Problem is
that the date format in the database record is dd/mm/yyyy
(UK), when
the record is displayed on the form it is mm/dd/yyyy(US)
which after I
update the record in the database the date has changed to the
new format.
I have tried everything I can to change the format but to no
avail...anyone any ideas how I can resolve this issue?
Thanks
Steve

stevo.s wrote:
> Hi
>
> I have tried changing the format on the date field on
the server behaviours
> panelto ddmmyyy. Also have tried to set the form field
format to ddmmyy. I have
> also tried to use a function I got from a posting
somehwere on the net to no
> avail. <%function ddmmyyyy(varDate)
> ddmmyyyy = Day(DateValue(varDate)) & "/" &
Month(DateValue(varDate))
> & "/" & Year(DateValue(varDate))
> end function
>
> I believe that this is a recognised issue with
Dreamweaver and Access but
> can't seem to grasp the work around! Problem being I am
teaching myself through
> books and internet articles and can be weeks at a time
without being able to
> look at the issue..each time I come back to it it is
like starting all over
> again! I was hoping that somewhere out there there is a
simple solution the
> issue perhaps a date picker with the built in
functionality to address the
> issue...I am keen to understand how to deal with the
issue rather than just
> change my database date field to fudge the problem as I
am in the UK and when I
> eventually start to use the application I would like
there to be some
> consistency with dates and that users are familiar with
the format.
>
> Any help gratefully received!
Its not Dreamweaver, or Access, its your servers locale, its
set to US
format, not the UK.
On your page at the top use:
<% Session.LCID = 2057 %>
This will force the page into using UK formatted dates. Use
it on any
page that needs to format the page correctly.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html

Export data to excel with EPPlus and Web Api - HELP!

I am trying to do a simple excel file export with EPPlus and Web Api. In the html client I have a button that calls the web api and opens a new window. No error is thrown, but the result is always "file could not be downloaded". I get the
save file dialog but the file name is Order/ instead of the expected Orders.xls or Orders.xlsx. Can anyone help? I'm surprised this is so difficult.
using System.Linq;
using System.Net.Http;
using System.Web.Http;
using OfficeOpenXml;
using System.Collections.Generic;
using System.IO;
using System.Net.Http.Headers;
using System.Net;
using System.ComponentModel.DataAnnotations;
namespace LightSwitchApplication
public class OrdersController : ApiController
// GET: api/Orders
[HttpGet]
public HttpResponseMessage Get()
HttpResponseMessage response;
response = Request.CreateResponse(HttpStatusCode.OK);
MediaTypeHeaderValue mediaType = new MediaTypeHeaderValue("application/octet-stream");
response.Content = new StreamContent(GetExcelSheet());
response.Content.Headers.ContentType = mediaType;
response.Content.Headers.ContentDisposition = new ContentDispositionHeaderValue("attachment");
response.Content.Headers.ContentDisposition.FileName = "Orders.xls";
return response;
public List<Order> GetOrders()
List<Order> colOrders = new List<Order>();
using (ServerApplicationContext ctx = ServerApplicationContext.Current ??
ServerApplicationContext.CreateContext())
colOrders = ctx.DataWorkspace.Data.Orders.GetQuery().Execute().ToList();
return colOrders;
public MemoryStream GetExcelSheet()
using (var package = new ExcelPackage())
var worksheet = package.Workbook.Worksheets.Add("Orders");
worksheet.Cells["A1"].LoadFromCollection(GetOrders(), false);
package.Save();
var stream = new MemoryStream(package.GetAsByteArray());
return stream;
This has been driving me crazy for two days!

Making some progress. I got the spreadsheet into a byte[] and used code from Paul Van
Bladel's blog to make the HttpResponseMessage. If I comment out the LightSwitch data access code, this works to export a spreadsheet from a static list to the browser from Web Api.
using System;
using System.Collections.Generic;
using System.IO;
using System.Linq;
using System.Net;
using System.Net.Http;
using System.Net.Http.Headers;
using System.Web.Http;
using Microsoft.LightSwitch;
using Microsoft.LightSwitch.Details;
using OfficeOpenXml;
using System.ComponentModel.DataAnnotations;
namespace LightSwitchApplication
public class Order
[Key]
public int Id { get; set; }
public string OrderNumber { get; set; }
public class OrdersController : ApiController
// GET: api/Orders
[HttpGet]
public HttpResponseMessage Download()
MediaTypeHeaderValue mediaType =
MediaTypeHeaderValue.Parse("application/octet-stream");
byte[] excelFile = ExcelSheet();
string fileName = "Orders.xlsx";
MemoryStream memoryStream = new MemoryStream(excelFile);
HttpResponseMessage response =
response = Request.CreateResponse(HttpStatusCode.OK);
response.Content = new StreamContent(memoryStream);
response.Content.Headers.ContentType = mediaType;
response.Content.Headers.ContentDisposition =
new ContentDispositionHeaderValue("fileName") { FileName = fileName };
return response;
public List<Order> Orders()
List<Order> orders = new List<Order>();
orders.Add(new Order { Id = 1, OrderNumber = "123456789" });
orders.Add(new Order { Id = 2, OrderNumber = "987654321" });
return orders;
// this doesn't work
//public List<Order> Orders()
// List<Order> colOrders = new List<Order>();
// using (ServerApplicationContext ctx = ServerApplicationContext.Current ??
// ServerApplicationContext.CreateContext())
// colOrders = ctx.DataWorkspace.Data.Orders.GetQuery().Execute().ToList();
// return colOrders;
public byte[] ExcelSheet()
using (var package = new ExcelPackage())
var worksheet = package.Workbook.Worksheets.Add("Orders");
worksheet.Cells["A1"].LoadFromCollection(Orders(), false);
byte[] bytes = package.GetAsByteArray();
return bytes;
The problem is that the LightSwitch query (commented out in the code above) is trying to load navigation properties for the orders. Error: "It is not valid to access this object on the current thread." How do I solve this?

Export DataGrid Data to File With JSP and Java

My user's need to be able to load the data into a
spreadsheet. I would like to stay with Flex and not use AIR. I used
the windows clipboard but I run into Flash Player timeouts for
larger data sets if the looping of the DataGrid rows takes longer
than 2 minutes. I would like to do this with passing the data to a
JSP page or use BlazeDS and then download the file. I would like to
just pass the ArrayCollection so I don't have to loop through the
DataGrid rows. I know I can receive an ArrayList from Java using
BlazeDS and it gets converted to an ArrayCollection. Is it possible
to send an ArrayCollection to a JSP page or Java class with
BlazeDS?

quote:
Originally posted by:
hartleyk
Can anyone enlighten me on why, when I attempt this with one
app everything works just as it's supposed to, while in a different
one (the real one I'm trying to put in place, of course!), the php
file simply displays
".stripslashes($_POST["htmltable"])." "; ?>
in the browser instead of taking me through the file
browse/download process? Anyone else run into this problem?
Thanks for any help you can provide!
its seems some syntax related problem.
can you please post whole of your code? i thinks its not that
much big.

I want to buy Nokia with Arabic and English keypad

Hi all ,
Does anyone know where and how I can buy Nokia E series with Arabic and English keypad ? Please let me know .

Read this:
http://support.apple.com/kb/ht1574

Windows 7 64bit Raid 1 Data Storage setup with UEFI and 6TB drives

i just bought a GigaByte MB with UEFI bios, 1 SSD 128GB drive for the OS (boot up), and 2 6TB drives for use in a raid 1 setup for the data storage.
I have been able to install win 7 64bit using the UEFI dvd drive. I have been able to define the 6TB mirror via the bios (under the Intel Rapid Storage Technology option) . But when ever i go into windows, and check under Disk Management, i don't
see the raid 1, i see two drives listed for the data, each at 1492 GB. I should be seeing 1 drive at 5.4TB.
note: I have tried re-installing win7 64bit many times to see if i have missed something. When i run setup off uefi dvd drive, i see that drive 1 (of what should be part of the mirror) and drive 2 are listed there at the reported 1492 GB size each.
So it seems that win7 doesn't see that mirror that i created via the bios. So is this a bios setting problem somewhere? i presume on this screen i should see the correct mirror size already.
Also, do i need to install win7 via the uefi dvd if i don't want to boot off those large drives (i just want to boot off the ssd. But when i did try that using a legacy mode, i couldn't later try to create a single large drive for the mirror using
GPT formatting. it just wasn't an option. although the mirror was recognized as 1 drive, but broken into 2TB and 3TB.)
what could i possibly be doing wrong??
Thanks for any help

Thank You Roger. I did call Gigabyte. This is how i solved it with the gigabyte support team.
1. Don't try installing Win7 64bit sp1 and setup RAID at the same time. (even go ahead and unplug those raid drives if you have it plugged in). The OS should be installed first on the boot drive, but make sure the BIOS is already set
to RAID (not AHCI. If you already installed OS under AHCI, you need to reinstall OS. i find this crazy because what if you decide to install raid down the road.. to an existing machine.. you can't do that because of this). Make sure
to install OS with the UEFI dvd drive option (i had done this).
2. Once the OS is installed, install all drivers that come for the Motherboard... That should include intel Raid drivers. (note gigabyte support didn't tell me to do this, but i didn't want to take a chance to have to reinstall OS again or have more problems,
but it makes sense.)
3. Now i have the GA-H97-Gaming 3 mother board, it had Bios F3. I upgraded it to F5 as per support tech.
4. turn off machine, and replug in the two 6TB drives.
5. after reboot, i find out that i no longer see Intel RAPID Storage Technology. (this should have displayed when i set the SATA Mode Selection to RAID before i started all this business... it did under bios F3, but not under F5.. bug?? i think so,
so i plan on letting gigabyte know about this). This is a problem. In Intel RAPID Storage Technology is where you define the RAID in the first place. OK, well after several reboots.. i tried to use CTRL-I to get to intel's interface
rather than that of the gigabyte bios. Voila... i define the Mirror...
6. I am able to boot into OS. I got to Drive Management. I now see 1 6TB drive. I initialize it of course using GPT. Format it. All all looks good now.
Hope this helps someone.. took me enough tries to get it right. I really am bothered about requiring the OS installed in the correct SATA mode just to get RAID working. As i mentioned, you can't change your mind afterwards without reinstalling
OS. Also i couldn't even get the OS setup to start when i had those raid drives plugged in.. so make sure to unplug them.
Best Regards.

Data not replicated with partition and dynamic calc

HI
I am using Essbase 11.1.2.1.
I want to use a replicated pratition wetween two Essbase BSO applications.
But in my source application, I have to send an account ACCOUNT (level 1) with several stored members and 1 dynamic calc member with formula. Due to this Dynamic calc account, the partition doesn't work (data are not replicated).
How could I do?
Thanks
Fanny

You're right, dynamic calc account are not issues. I am using them in partition.
But py issue is there :
The source dimension is like this :
TAX (Dynamic Calc)
- 6xxxxxxx
- 6yyyyyyy
- 6zzzzzzz (Dynamic Calc) = formula
The target dimension is like this :
TAX
And so I need to send TAX (Source) to TAX (cible).
I don't think it is possible, but I would like a confirmation before using something else.
I hope it is clearer now.
thanks
Fanny

Data flow between R/3 AND APO

How the chars and Navigational attributes are flowing in-between the R/3 AND APO ?
Why we need to maintain the chars and nav attrr in APO? . Any input will be highly appreciated
Thanks

Hello Nick,
Navigational Attributes : Characteristic attributes can be converted into navigation attributes. They can be selected in the query in exactly the same way as the characteristics for an InfoCube. In simple words an attribute is a characteristic that is logically assigned and subordinated to another characteristic. Navigational attributes offer a way to plan multiple objects while achieving optimum system performance in Demand Planning.
e.g. Costs of the cost center drilled down by person responsible: You use the attribute u2018Cost Center Manageru2019 for the characteristic u2018Cost Centeru2019. If you want to navigate in the query using the cost center manager, you have to create the attribute u2018Cost Center Manageru2019 as a navigation attribute, and flag it as a navigation characteristic in the InfoCube.
Characteristics : A planning object such as a product, location, brand or region.
The master data of Demand Planning or Supply Network Planning encompasses the permitted values of the characteristics, the characteristic values. Characteristic values are discrete names or numbers . For example, the characteristic 'location' could have the values London, Delhi and New York.
Regards
Rahul Chitte
Edited by: Rahul Chitte on Aug 30, 2010 5:07 PM

Data Flow from Drop Down and Visibility

Hello VCers,
I am building a sample VC app, where I have one iView and two forms, "Country Selection" and "Country Results".
Initially "Country Selection" form only will be visible and "Country Results" for will be invisible.
In the First form, I want to enable to the user to select the country from dropdown and after that, I want to display the country, user selected in "Country Results" form.
Could you please help me on,
1. how to get the value from dropdown in the 1st form to 2nd form?
2. How to make the visibilty of "Country Results" form to be visible when the user selects country in the 1st form.
Thanks a bunch. Appreciate if somebody can help.
I will sure reward points for help.
/Sunita.

Hi ,
For First Question:
Using signal in and Signal out you can get the data from one form to another Form.
1.create a button with Customaction in First form a
2.Drag a signal out from output port of first form and assaing the Customaction as event .
3.Add a signal in to the input port of 2nd Form but the names of both signal in and signal out should be same.
After selcting the Country and Clicking on the ok button it will go to 2nd form.
For Second Question.
To put a visibility condition depending on the country filed value
Set the visibility condition of 2nd form to BOOL(@CountryFiledofFirstform).
Regards,
Govindu
i think above procedure will work perpectly if u still have problem get back to me
if helpful award points

How do I control a data log session with period and sample time?

I need a data logging system where the operator can select 2 logging parameters: Log Period and Sample Time. I also need a START and STOP button to control the logging session. For example, set the log period for 1 hour and the sampling time for 1 second. (I may be using the wrong jargon here.) In this case when the START button is clicked, the system starts logging for 1 second. An hour later, it logs data for another second, and so on until the operator clicks the STOP button. (I will also include a time limit so the logging session will automatically stop after a certain amount of time has elapsed.)
It’s important that when the STOP button is clicked, that the system promptly stops logging. I cannot have the operator wait for up to an hour.
Note that a logging session could last for several days. The application here involves a ship towing a barge at sea where they want to monitor and data log tow line tension. While the system is logging, I need the graph X-axis (autoscaled) to show the date and time. (I’m having trouble getting the graph to show the correct date and time.) For this application, I also need the system to promptly start data logging at a continuous high rate during alarm conditions.
Of course I need to archive the data and retrieve it later for analysis. I think this part I can handle.
Please make a recommendation for program control and provide sample code if you can. It’s the program control concepts that I think I mostly need help here. I also wish to use the Strip Chart Update Mode so the operator can easily view the entire logging session.
DAQ Hardware: Not Selected Yet
LabVIEW Version: 6.1 (Feel free to recommend a v7 solution because I need to soon get it anyway.)
Operating System: Win 2000
In summary:
How do I control a graphing (data log) session for both period and sample time?
How do I stop the session without having to wait for the period to end?
How do I automatically interrupt and control a session during alarm conditions?
Does it make a difference if there is more than one graph (or chart) involved where there are variable sample rates?
Thanks,
Dave

Hello Dave,
Sounds like you have quite the system to set up here. It doesn�t look like you are doing anything terribly complicated. You should be able to modify different examples for the different parts of your application. Examples are always the best place to start.
For analog input, the �Cont Acq&Chart (buffered).vi� example is a great place to start. You can set the scan rate (scans/second) and how many different input channels you want to acquire. This example has its own stop button; it should be a simple matter to add a manual start button. To manually set how long the application runs, you could add a 100 ms delay to each iteration of the while loop (recommended anyway to allow processor to multi-task) and add a control that sets the number
of iterations of the while loop.
For logging data, a great example is the �Cont Acq to File (binary).vi� example.
For different sample rate for different input lines, you could use two parallel loops both running the first example mentioned above. The data would not be able to be displayed on the same graph, however.
If you have more specific questions about any of the different parts of your application, let me know and I�ll b happy to look further into it.
Have a nice day!
Robert M
Applications Engineer
National Instruments
Robert Mortensen
Software Engineer
National Instruments

Macbook Pro with SSD (optibay) and HDD. Want to clean install with discs and move hard drives.

Hi all,
I have bought a used Macbook Pro 15' i5 Mid 2010 in brilliant condition. It came with original HDD in main Hard drive space and and SSD in an optibay. This all works fine and came with Mavericks already installed.
I want to start using the laptop like from new as there is nothing on there i currently need atm and dont want problems in the future with my apple id not being the original installer of mavericks. (had a similar problem previously on a used macbook white that had lion on)
What i want to do is erase and move the SSD to the main hard drive bay (have read this is preferred) and a clean install using install discs that came with it onto the SSD. Then install the HDD into the optibay or external enclosure and reinstall optical drive, not sure on that one yet.
My main questions are about the process i should use. There is nothing i need to back up or anything as this is effectively a new machine to me. Shall i simply erase the SSD (currently contains the OS) and install it in main hard drive bay and run install discs to install original OS (10.6.3)? Is it that simple? Any tips on erasing SSD would be useful also?
Also as the machine currently boots from the SSD that is in the optibay, is there anything that tells the machine to boot from that hard drive as apposed to the main HDD bay or does it just know? If there is, when i install the SSD into main hard drive bay how do i tell the machine i have done so and to boot from there?
The other thing i may do is buy a new SSD and do a new install on that and leave the current SSD in the optibay and use that for storage. Undecided on that yet.
Any help will be much appreciated. Thanks.
Sam

To do what you want, and the only way to do what you want legally and physically, you will need a set of Original System Reinstall DVD Discs. Without them you can't do what you want as the install of Mavericks that is now on it is TIED to the previous owners Apple ID and can not be transferred and or Reinstalled without knowing that persons Apple ID. And even iof you knew it it would still be TIED to that Apple ID and not yours.
So did the previous owner supply the Original System Reinstall DVD disc Set? If not you will need to order them from Apple.

Does iTunes 10.7 (Cover-Flow work with Mavericks and if not what do I have to do?

What do I have to do to keep my 10.7 iTunes (Cover-Flow) with Mavericks?
Thanks guys all appreciated responses will be accepted in this matter.

I just had the similar issue. I redeemed my iTunes gift card then went to download something and was asked for my billing info. I completed the information and I think accepted terms and then had a pop-up telling me that my my account would be debited with the purchase. My VISA (billing info) did not appear to be charged as my gift card amount showing in the top right decreased with the purchase. So I just completing the information and hopefully it will happen the same for you! Good luck!

I want Data flow Co with SD and MM

Similar Messages

Maybe you are looking for