I want delete the Master data loads which i have already loaded earlier

Hi BW Guru's,
I want delete the Master data loads.
But i am unable to delete.
is there any option to delete from RSD1
Please send steps

Hi,
If that master data related ifo is present in cube u cont delete master data.
In that case u have to delete req in cube then u can delete
let me know further
*******Asgin Points if usefull***
Cheers,
Satya

Similar Messages

  • Deleting the Master Data is not possible

    hai
    Im loaded the Master Data .
    I want to delete the Master Data. So how can i delete ??
    Im trying to delete Master Data by context menu of the Master InfoObject .But im unable to delete the master data .
    I heard that it is big issue.
    So what can i do for deleting the master data.
    pls tell me
    rizwan

    hai all
    Thanks for quick reply .
    I deleted the data from InfoCube and ODS .
    Im trying to delete the master data attribute data by context menu of master infoobject . But it is says that "Not all master data can be deleted".
    I looked at the help from that message .It says that i need to go SLG1 transaction and then delete like that
    But i dont have authorization for that transaction(SLG1).
    So plese tell me what i ahve to do for deleting the master data .
    txz
    rizwan

  • Error while deleting the Master data

    Hi Friends,
    i am getting the below error while deleting the data from a master data:-
    The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
    Do you want to delete the data records that are no longer in use?
    Could you guide how should i proceed to delete the data.
    Regards,
    Hirdesh

    Hi Hirdesh,
        If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
    Regards
    Prasad

  • How to delete the master data of a Customer created in a SALES AREA?

    Hi All,
    I've deleted a Customer (master data) by t.code OBR2. But it exists again in its SALES AREA.
    Could anyone tell me how to delete it in the sales area too?
    Thanks

    Hi,
    I dont think you can delete a customer. you can market it for deletion in XD06.
    for deleting customer master data you have to setup an archiving project.
    Also check the similar thread
    doubt in obr2
    Hope it helps you.
    Regards,
    Sats.

  • Deleting the master data

    When I tried to load an existing master data object ( 0VENDOR_ATTR), it is showing the following error.
    Diagnosis
        The existing DTP requires a serialized update because fields are upda
        non-commutatively during the processing run (for example, MOVE).
        Therefore all new data records that have the same semantic key as
        incorrect records that have not yet been corrected in earlier request
        or earlier data packages of the same request, are filtered out after
        extraction in a special step. In this way the system ensures that
        incorrect data records are not repeated for your changes, which may n
        contain errors themselves.
    System Response
        The data record is not updated but is written to an error stack.
    Procedure
    Correct all incorrect data records and update them using an error DTP.
    How to correct 1 million records? and how to use error DTP.. When I right click on the Infooobject and tried to 'DELETE MASTER DATA", it is saying ' all master data cannot be deleted"..
    How to procede further...
    Thanks
    Manu

    Hi manorama,
    firstly I don't understand why you are posting a second thread regarding this issue...
    secondly and as I explained you are pushing your whole PSA data from 0CUSTOMER_ATTR DSource into your vendor master; this means that you'll have duplicate keys (first because you have several requests in your PSA and second, depending on your transformation you may as well have one vendor for different customers...)
    Please describe with more details what field from 0CUSTOMER_ATTR you did map to the 0VENDOR key; also the system is telling you that you need to serialize your request regarding the way it is processed in the diag processes; why don't you do so in the DTP settings??
    I repeat also and again; your issue as nothing to do with deleting master data....
    if you don't cooperate with us you won't get accurate support...
    hope this helps...
    Olivier.

  • Unable to delete the Master Data

    Hello Gurus--
    How to delete the unused MD for an Infoobject,.
    Unused MData were in A version in M,P and text tables.
    Thru the program "RSDMD_DEL_PARALLELIZER" and "RSDMD_DEL_BACKGROUND"  The MD hadn't got deleted.
    Scheduled the above programs and checked the logs in SLG1 for both used and unused MD,.
    The logs says that
    a) Checked,.and I confirm that the unused MD is not present in any targets.
    b) MD deletion hadn't happened for my unused MD.
    --> The MD is in A version in the M,P, Text tables, if it is in M version  these data can be deleted,,
    Checked for the same in all the forums .
    Couldn't able to find the same.
    Very very Ungent sirs' !!!
    Regards
    Vishwa.

    Infoobject --> right clikc --> maintain master data
    Select rows u wanted to delete and click 'Delete' icon. And SAVE.
    If system prompt u 'some master data cannot be deleted' .. continue with this message.
    then goto tcode SLG1-- enter Object: RSDMD and Subobject: MD_DEL and User: ur userID and F8
    In the next screen Expand node and dbl click 'Problem class additional information'
    This will give u which ever objects using SIDs of this master data.
    U should delete this SID according to that list.
    Then U should delete particular data from DSO/Cubes.
    Once data deleted from cube, then
    Use Tcode RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Transaction Data -> Entries Not Used in the dimension of an InfoCube (Dbl Click)
    From the right side window, expand u201CEntries Not Used in the Dimension of an InfoCubeu201D Node &
    Enter InfoCube (like 0SD_C01), click u201CTransferu201D
    Now, click u201CExecuteu201D (Toolbar)u2026 and the results displayed in the right side window..
    Now, click u201CCorrect erroru201D (Toolbar)
    Delecion of the master data

  • How can I use the money in the iTunes account balance which I have already redeemed from an iTunes gift card without entering any credit card information ?

    I just redeemed an iTunes gift card code and then tried to buy a movie. But iTunes keeps asking me to enter the details of a valid credit card. I had been buying apps, music and movies on multiple Apple devices without any credit card information. I just used the iTunes gift cards. But suddenly iTunes just would't allow me to do that any more. I wonder why... How can I keep using the money I have redeemed from iTunes gift cards without entering any credit card information?

    Perhaps you should Contact the iTunes Store Customer Service:
    Apple - Support - iTunes Store - Contact Us

  • Getting the error while loading the master data

    Hi
    i have tried to delete the master data using right click and delete master data, but still there are data.
    Now i am trying to load this master data again then i am getting the message "0 from 50033 records"
    and data load got failed with error message "master data/text of 0vendor already deleted "
    and due  to this i could not able to load my other infoprovider (which have 0 vendor).
    can any body help me, it very urgent...
    thanks and regards
    Anupam

    Hi Raju,
            I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since  time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
    Hope this helps you.
    Thanks & Regards,
    Nithin Reddy.

  • Deletion of master data for 0CS_ORDER

    Hello Friends,
    I have a requirement to enhance an IOBJ 0CS_ORDER with Order status values(2 new statues are added). I have done the enhancement part to the extractor in the source system side. Now after replication in BW, to add 2 new IOBJs in CS_ORDER, I need to delete the master data.
    When I try to do this, I get the msg that some master data could not be deleted.
    This is fine as we have transaction data loaded for large no. of objects which has 0CS_ORDER.
    In dev, I have deleted the master data using SE14 for tables P, S , X, T.
    My concern is in Production, I have huge volume of transaction data. To transport the changes, I need to delete master data. But this would require deletion of Transaction data from all IP where CS_ORDER is used.
    If I do so using SE14, and tranport the changes and later load MD to CS_ORDER. Will this cause INCONSISTENCIES?
    What can be other possible ways??
    Please share your opinions.
    Many Thanks,
    VA
    Edited by: Vishwa  Anand on Sep 2, 2010 5:36 PM

    Definitely Yes.
    It will damage all the SID connections earlier which this master data had with the other objects likes transactiona objects (ODS, CUBES etc). Even You can not access the data from the cube or ODS where the navigational attributes are flagged for reading.
    So do not use SE14 for deletion of MD. This is very specific to use.
    You can delete the Master data as long as its not been used in other targets so that you can refill it easily and also there wont be any inconsistencies..
    Hope this is clear for you..

  • Master data/text of characteristic 0MATERIAL already deleted

    Dear BW Experts:
                    I'm getting this error message when I tried an extraction into an infocube.
    "Master data/text of characteristic 0MATERIAL already deleted"
    Before the extraction, I've loaded the characteristic 0MATERIAL succesfully.
    Can anyone help me? any clues?
    Thanks in advance.

    Hi All,
      We have also received the "Master Data has been deleted" error message. If you delete (or try to delete) the master data for a characterstic, you will get this error message for the next transaction data load. Just mark the failed request to red and back it out from the data targets and then try loading the data again, this time you will not get any error message.
      It will only give that error message for the first load after the deletion of master data.
      Now coming to the second point. How to delete the master data?
      As all of you know, we delete the master data by selecting delete master data from the context menu of an infoobject. This deletes all the master data records that are not currently being used in any of the infoproviders, hierarchies etc. In the system log (transaction SLG1), it will show what are all the records that got deleted and if a record is not deleted it will let you know where that master data is being used.
      Now the problem with deleteing master data in this way is, this runs in dialogue mode and if the no of infoproviders and data volume in those infoproviders is huge it will take very long long time to complete you will get a time out message. There is a function module "RSDMD_DEL_MASTER_DATA" , to run this in background you need to create a ABAP program and migrate it all the way to Production and run it in production.
    Luckily, there is a SAP delivered ABAP program which we can use to delete master data. That program is "RSDMD_DEL_BACKGROUND", run this program in back ground with the input parameters as mentioned below.
    P_IOBJNM - Infoobject name.
    P_CHABNM - Infoobject name.
    P_DELSID - X
    P_DELTXT - X
    P_OBJ  - RSDMD
    P_SUB  - MD_DEL
    P_EXT - MDDEL_Infoobject name_BG
    You can verify in system log, which records got dleted and which are not deleted.

  • Needs to delete one Master Data from main process chain in development syst

    Hi All,
    Can any one pls suggest how we can delete the master data load from main process chain in development system.
    In the main process chain nearly i am having 52 master data loads in that i required to delete one master data.
    Thnanks in Advance.
    karuna.

    Hi...
    1) go to RSPC1
    2) Give the technical name of the process chain
    3) in the top where we write tcode....there write COPY..and press enter...
    4) then remove the start process and the desired master data loads..
    5) create a new start process with a new variant..if you want to put ant condition you can put it there...
    6) then link the start process with the first process..
    7) activate your process chain...and schedule it as per your require...you can make it immediate run or can scedule it for a particular time...
    Or if you don't want to create anew process chain...then go to the design view of the PC and remove the desired load and again activate it...
    Hope this helps you...
    Regards,
    Debjani...
    Edited by: Debjani  Mukherjee on Sep 4, 2008 4:35 PM

  • Deletion of master data with / without SID

    Hi Experts,
    Client have requested for master data clean up.
    Requirement:
    "Several masterdata tables in Production system contain wrong entries. These entries should be cleaned up. The attached Excel contains the keys of the entries to be deleted"
    Steps to be taken:
    1. emptied/deleted content of all the cube.
    2. delete data from master data
    Help required:
    What will be impact of deleting master data with SID when DSO data is not deleted.
    What if i choose without SID option for deletiing master data
    Regards
    Suresh Kumar

    Hi Suresh,
    Deleting master data is one critical job and ned to be very care ful.
    First try to find out the where used list of that particular IO. delete data from all the CUBEs and DSOs. i don't think without deleting the transaction data from all the objects that you see from where used list, you will be able to delete the maste data.
    System doesn't allow you, it will say "Not all selected data is deleted" Some message of this sort when you try deleting the master data.
    If you are deleting the TD and  master data, why do you need the SID to be spared, delete them too. next time you load the correct master data. the SIDs are again generated.
    Go thru the below thread, this gives you lot if info on MD deletion.
    [Re: SID Tables]

  • How to check the master data records in using SE16 transaction?

    Hi,
    Can you please help me to check the master data records using SE16 transaction?
    Loaded master data for Characteristic and want to check the records in the master data tables.
    Thank you for your help!
    Lakshmi

    Hi!
    Welcome to SDN.
    you have to check the master data tables.
    soo in Se16 you have to select the appropriate master data table and view the data.
    following thread explains about masterdata tables
    MasterData table?
    regards
    mohan
    Message was edited by:
            Mohan Krishna

  • Regarding the Master Data and the MRP maintained.

    Hi,
    i have one query,my client has 4 plant,for manufacturing a product there are 10 operation.The 4 operation is taking on Plant A.The 5th and 5th operation is is in Plant B.The 7th operation is at Sub-contractor to vendor and return back to Plant A,and the remining operation is at Plant A.
    So what are the Master Data and MRP we have mainted for that?
    Please revert back.
    Thanks,
    Mohit

    Dear,
    Sub-contracting is carried out for 2 types-
    1) Operation SubContracting & 2) Material SubContracting
    You need to activate SubCon key (30) in MRP2 for the material which you want to send.
    When you run MRP, it will check the system, if you have the stock as per requirement in the system. If the adequate stock is unavailable it will create PR, which you will need to convert in SubCon Purchase Order.
    Operation SubContracting
    You have to activate External Processing
    "X" (T Code OPJ8) in PP01 Control key for that operation which u want to do externally
    In the routing for the externally processed operation enter the control key as PP02
    In the operation details screen in the External Processing tab enable the check box subcontracting
    Enter thr info rec no and other details and save.
    Thru ME58 Convert purchase requisition to purchase order Thru ME2O Send the material to subcontractor. .Migo receive the material from subcontractor (check theMovement type-541)
    Hope it will help you.
    Regards,
    R.Brahmankar

  • How to regularly update the Master data/Text/ Hierarchy for BW DEV?- Urgent

    Hi Experts,
    Can anyone help me to understand how to update the Master data/Text/ Hierarchy regularly for BW DEV.
    Since all the new query developments are taking place in DEV, users are not finding the latest Masterdata/ Texts /Hierarchy in the DEV system.
    I have searched in SDN and got a document "HOW TO DOWNLOAD A HIERARCHY TO A FLAT FILE". However, is there any other way to upload the master data automatically on periodical basis.
    Please help urgently.
    Advance Thanks,
    BW USA

    If you want to extract master data from PRD in order to load in DEV, i suggest to do this (its a tricky thing):
    For example, you want to download 0EMPLOYEE
    1-In PRD, transaction RSD1
    2-Enter 0EMPLOYEE
    3-Copy the Master table for 0EMPLOYEE (/BI0/MEMPLOYEE)
    4-transaction SE16
    5-Enter the table name /BI0/MEMPLOYEE
    6-in the selection screen, go to "Options" Menu and select "User parameters", and now select "Standard List SE16"
    7-Execute
    8-Now its show's up the 0employee data, go to "System" menu - List - Save - Local File
    9-After you have the flat file, only rest create Infopackae in DEV Env. and load it from the flat file.
    Asigns points if useful.
    Regards

Maybe you are looking for

  • Slow fileshare transfer speeds with Lion Server

    I'm running Lion Server on a Mac Mini and using SMB to share files between the server and both Windows and Mac machines. I can't figure out why I can only get 2 Mb/s transfer speeds between the server and the other machines. I'm quite certain I'm not

  • Most iPhoto '09 albums don't show up in the screen saver preferences

    I just realised that most of my iPhoto '09 albums don't show up in the screen saver preferences... How can I make them visible again?

  • Decode Statement Inside the Case statement

    Can we use Decode Statement inside a CASE Statement as show below -- It is giving an error -- Is the a better way to write with out any error create or replace function test (a varchar2) RETURN VARCHAR2 is m varchar2(20); begin m := CASE WHEN a IN (

  • How to change active partition?

    Hi experts, I have disk D which contains OS windows 7 and not in active, but my another disk E is in active with 100% free space.so, how can i change active partition from E to D ? please help me  

  • Buyer cannot create a purchase order

    Hi I'm a purchasing super user. and a buyer (newly added). though i can see my name in buyers form as a buyer, still i cant create or open any Purchase Order. It says "You are not setup as an employee. To access this form you need to be an employee."