I want driver for chipset Lenovo Thinkpad x121e (30515QG)
Hello,
I would like install correct driver for chipset for this type notebook, because driver (downloaded from Lenovo support) - 8gh104ww.exe for my type 30515QG doesn´t work, please could you send me correct link for driver? Thanks
Hello,
You might want to try installing the chipset drivers located here on AMD's support web site.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество
Similar Messages
-
Will there be a camera driver for the Lenovo ThinkPad X220T using Windows 10 64-bit
Will there be a camera driver for the Lenovo ThinkPad X220T using Windows 10 64-bit? Laptop Tablet Model 4294CTO
I installed the latest Win7 and Win8 drivers and the camera appears for Skype and in Device Manager as Integrated Camera under Imaging Devices, but does not appear in Devices and Printers. There is no VEN DEV ID property for the device. Hardware IDs are:USB\VID_04F2&PID_B217&REV_8029&MI_00USB\VID_04F2&PID_B217&MI_00
-
Lenovo Thinkpad x121e - windows 10 installation
nightmare trying to find a suitable place to post so apologies if this should be elsewhere. Lenovo Thinkpad x121e - windows 10 installation OK, looks like I boobed and installed windows 10 - having received the lovely invitation from dear old microsoft I assumed that it would be compatible. Unfortunately, my laptop is not at all happy. Screen blinks and goes a little bonkers while loading up programs and makes the computer unusable, although each time it seems to advance a little - now 36 hours in and one time it even showed up the MS blocky interface. What is my best move forwards? A reset? Any help greatly appreciated as I am now minus my laptop.
I had exactly the same problem.I tried to fix it like you using the Lenovo software to no avail.The solution for me was to use "settings" in Windows: Go to Start/Settings/Network & Internet/WiFi and hopefully (as I did) you will find it switched off. Then switching on should find your router and hence switch on your WiFi.
-
Have a new Pavilion 23 and want driver for Scanjet
Have a new Pavilion 23 and want driver for Scanjet G2710. Can anybody help please
Hi,
Select your operating system below, then download and install the drivers listed within the Driver - Product Installation Software section. Select the Full Feature to if available, otherwise select the Basic drivers which allow scanning via Paint or Windows Fax and Scan:
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=us&sp4ts.oid=3423845
For any issues, be sure to clarify what operating system you are using.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Stripes on screen Lenovo Thinkpad x121e
Hi,
I had sometimes horiznotal stripes on screen Lenovo Thinkpad x121e and sent it to service.Here is video:
http://www.youtube.com/watch?v=tpTtHWkC1jI
They did tests and said that everything is OK,stripes didn´t discover.Few days ago,one day I see stripes on screen again.Where is problem?hey LTP80,
do you have any devices near it such as a radio player, cellphone, etc that could cause an interference ?
use that unit at a different location and see if the stripes appear. i'm guessing something in the original location is causing the stripe to appear.
that is why when the service center looked into the issue, they didnt find any.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
Quick Links to Windows 7 Beta Device Drivers for some Lenovo Thinkpads
This post has been created to help members to navigate quickly to specific beta driver discussions.
Lenovo Fingerprint Software (beta)
WWAN Sierra MC8775 HSDPA (beta) driver previously titled HSPA Wireless WAN (beta) driver.
WWAN Sierra MC5725 EVDO (beta) driver
Ricoh Multi Card Reader (beta) driver
UltraNav Driver (beta) and Ultranav Utility (beta)
ThinkVantage Active Protection (beta) driver
ThinkVantage Access Connections (beta) software
UNDP Wireless WAN Driver (AWA) (beta)
ThinkPad Power Management (beta) Driver & Power Manager
System Interface (beta) driver
Hotkey Driver (beta)
ThinkVantage GPS (beta)
Intel AMT 4.2 LMS&SOL and Intel AMT 4.2 MEI (beta) drivers
Tablet Shortcut Menu (beta)
It
would be helpfull to the development team if you could ensure you post
which Lenovo system you are using when posting in the individual
threads, or even better, add this information to your signature.
Edit added Tablet Shortcut Menu
Message Edited by andyP on 06-15-2009 09:12 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog2 requests, if possible
When these are updated, could you add the date updated?
Can you post the order in which these should be installed, if that is important?
Thanks
x200 7454-CTO; 320GB HD; 4GB; Win 7 64bit - Now on RTM.
- 2nd SSD with Win 7 Enterprise RTM
T61p - RTM - Win 7 Enterprise
S10 4231 for my wife - now on Win 7 Ultimate RTM -
Re: Availability of Windows 7 Beta Device Drivers for some Lenovo Thinkpads
I think another point I need to throw in is this, sorry if it annoys the moderators but anyway,
If you are going to post beta drivers into a beta forum full of Lenovo technical users looking to try the latest stuff, then it's probably a good idea to keep some sort of line of communication open in the channel where you just attempted to make the drivers available. Kudos to Lenovo for having this *official* forum and kudos to them for trying to get some Windows 7 drivers out there to satisfy us, but there has to be a point where you turn around and say well look, they can't just get everyone's hopes up, post 10 odd dead links and then disappear for another week or two.
There's got to be some middle ground here, and I don't want to come off as criticising the fine work that I'm sure is going on somewhere, but at the same time a tiny bit more communication would go a long way to making us all feel more at ease, its the same hoopla with the Software Update being pulled, one blast of news and then nothing for ages. I'd rather have broken links and communication than all the downloads working and back to silence again.
I also appreciate that everyone at Lenovo is rather busy and that the people that come here devote what Im guessing is their free time or their already stretched work time to be here, but I'm not asking the world for someone out of a company of what, 21-24 thousand employees strong to check here once a day or something, am I ?
Anyway just my 2 cents, I'm sure I'll get yelled at but thought I'd throw it in anyway.
(Been asking for firmware for F3507G WWAN for nearly 2 weeks now as well to boot, wouldn't kill someone to just come on here and say, no, not gonna happen, we don't issue firmware, or a maybe in two or three weeks when we get round to it, all the more shameful when the likes of Dell and Toshiba have issued the latest firmware for their practically identical WWAN cards weeks ago, never thought I'd see the day where I was slightly envious of either a Dell or a Toshiba owner !)
Note from Moderator: Crude language removed.
Message Edited by JaneL on 05-26-2009 08:10 PM
DangerMouse
Current Machines : T420s/W530/X1CTJanetL (Nonny):
I see the download links are working again. Thanks to whoever took care of that.
Like those few Lenovo employees roaming around in here, for the most part we customers are also helping out on a volunteer basis by providing feedback to Lenovo and support to other customers - and sometimes potential customers. Perhaps Lenovo should consider creating an official Lenovo-to-customer support and discussion forum (or you could provide a link to it if one exists). Anything that would improve communications from Lenovo to its customers (at this point regarding windows 7 drivers) would be welcomed.
Thanks,
PFM -
Availability of Windows 7 Beta Device Drivers for some Lenovo Thinkpads
Good Day
Lenovo will be posting 10 Windows 7 Beta device drivers* to it's public
Windows 7 beta webpage before the end of May. The drivers posted will be:
1) Lenovo System Interface Driver
2) ThinkVantage Active Protection System
3) UltraNav Driver with support for single and multi touchpad systems
4) UltraNav Utility
5) ThinkVantage Power Manager
6) ThinkVantage Power Management Driver
7) FingerPrint Driver
8) Hotkey Features
9) ThinkVantage Access Connections ver 5.40
10) WWAN
The drivers will be available at www.lenovo.com/windows7beta
These drivers are STRICTLY beta and have NO public support. Please do not
call the Lenovo HelpCenter seeking support as they will not assist you.
Feedback on driver issues via this thread is encouraged and those concerns will
be send back to the individual device driver development teams.
There will be 32 bit and 64 bit versions of some device drivers are available.
*Drivers are supported on RC Build 7100 and later. The drivers may work on earlier builds
Terry Lenovo Win 7 TestLenovo Enterprise System Experts<chuckle> we are all excited to try them
Message Edited by Darksaber on 05-16-2009 10:28 AM
x200 7454-CTO; 320GB HD; 4GB; Win 7 64bit - Now on RTM.
- 2nd SSD with Win 7 Enterprise RTM
T61p - RTM - Win 7 Enterprise
S10 4231 for my wife - now on Win 7 Ultimate RTM -
FOR SALE - Lenovo Thinkpad Tablet, Docking Station and Keyboard Folio Case
As my daughter is insisting on a laptop, her Thinkpad Tablet and Accessories will have to go....
The tablet is the 16GB WiFi Version (1838-5SG). The Docking Station is the standard one (0A33965), as is the Keyboard Folio Case (which is a Western European keyboard type - ASM P/N 0B33512 FRU P/N 03X6354).
The Tablet has one very tiny scratch on the screen, hardly noticeable, other than that is in perfect condition (the Styuls Pen is only 4 months old). The Docking Station has a slot cut out to enable a mini HDMI Cable to be connected through the facia (to the tablet), and other than that, is in perfect condition. The Folio Keyboard Case is in perfect condition. All cables, etc are included, and the Docking Station power cable has an EU plug (note that if you live in a Country which doesn't have EU Plug sockets, a standard plug can be purchased separately from the adaptor, they normally cost pennies....)
All boxes, packaging, instructions, etc are included, including the receipts for warranty purposes. The tablet and docking station are less than 1 year old, as verified by the receipts.
I can send full info, including photos, etc, if needed.
If anyone is interested, please make me an offer.I was thinking i could use this Motorola Wireless Keyboard, it only needs an HID bluetooth connection, the ThinkPad Tab supports HID?
-
Reseting CMOS, BIOS, Fingerprinting access for a Lenovo ThinkPad T60P 2007-8EU
Greetings,
My machine has been so hacked that I have now disabled Blue Tooth, Infrared and Cingular SIM access to it by removing the hardware components. I also shut down the funcionality in the BIOS. Only Ethernet and WiFi are left. In order to do this I had to gut the machine and extract components like the SIM card, and a couple of chips.
After I put it back together, when I boot it I get messages that the security system has been tampered with. So, I tried to configure BIOS and in spite of removing the secondary battery, settings related to security persist. Are they stored in CMOS or elsewhere. Thinkgs like Paraphrase.
However, my fingerprints gone and I cannot restart the security chip features. So, my question, in case anyone is out there, is, how do I reset CMOS, reload BIOS to a decent version, and then re-enable the security system involving the security chip and figerprinting?
All of my problems began after I did a stupid suggested BIOS update.... Duh!
Anyway, I hope I can get some help from someone short of taking the machine in. I hate to say it, but I never get it back the way I want so I might as well do it myself. As a CS major, I think I can hack it.
Thank you and regards,
Jean-PierreGreetings,
The motherboard is not useless. After I received the message indicating that the security chip had been tampered with, I still went forward, entered BIOS and reconfigured it to my specs. Then I booted the machine and everything came up fine. After being in CS for nearly three decades, I know some error messages don´t affect functionality.
However, like I said, I still want to completely clear CMOS memory, and install a good version of the BIOS as I can pinpoint the flash update suggested by the system, and which I stupidly accepted, as one source of problems. I would like to roll back to factory BIOS, or the latest stable version.
As far as the security chip, I have seen no mention of it in the Documentation, don´t know where it is located and I did not remove it. I did remove the BlueTooth Chip, the Cingular Wireless Chip and its corresponding SIM as well as the modem Chip.
Regards,
Jean-Pierre -
Driver for XP SP3 Thinkpad X201
Hi,
I've installed all Drivers on XP SP3, but i don't find the last one.
It's Bus Controlleur SM
PCI\VEN_8086&DEV_3B30&SUBSYS_216717AA&REV_06\3&B1BFB68&0&FB
If you can help me.
Thanks8086 is intel (nice joke, isn't it ?)
Probably you need the intel chipset package.
Yu can just grab it from the lenovo or intel site, or simly install the thinkvantage updater and let it work. -
Wanted driver for epson laser printer C1600 none seem available
Driver not available from either apple or epson, perhaps someone knows of a generic driver that will work. Thanks
When you go to System Preferences > Print & Fax, click on the printer then check what it says for "Kind" if it mentions anything to do with Guten Print then you have the wrong driver installed. Remove the printer from the list, install the driver from the following page:
http://esupport.epson-europe.com/FileDetails.aspx?lng=en-GB&data=FGQ8MBMpKluuNQq HIN7jNpif1fTpfvWP2jui+Hg0obkU003D&id=318867
Restart the Mac, go back to Print & Fax, if the printer hasn't already added click the + button and click on your printers name once, underneath the name it should say Print Using, check this has your printers name in it and then click Add. If this does not work then try a full uninstall process, go to Mac HDD/ Library/Printers and drag the Epson folder to the trash can, repair your disk permissions and then install the driver again from the above link and restart the Mac, go back to Print & Fax, if the printer hasn't already added click the + button and click on your printers name once, underneath the name in Print Using, check this has your printers name in it and click Add. This should resolve any issues you have with missing print settings. -
Trackpoint in Thinkpad X121e not always working
Hi,
my Lenovo Thinkpad X121e runs with ArchLinux x86_64 and all packages updated (no testing versions). All worked fine, but since a while i have the problem, that the trackpoint sometimes does not work. This occurs randomly at startup. Sometimes it works, sometimes not. If it works, it keeps working all the time the machine is running. If it is not running, after a reboot it will most likely work. This problem seems to occur randomly at about every tenth start of the machine. I remember that the trackpoint did work without problems in the past, but some update in the last few months has killed it. I currently cannot figure out, why this happens.
I attached the dmesg and lsmod output for the working and non-working state of the trackpoint. If you need more info, please ask. I hope someone can help me :-)
Thanks.
Edit: Added also the Xorg.0.logs for working and non-working states.
dmesg with a working trackpoint:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012
[ 0.000000] Command line: root=/dev/sda3 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c6efd000 (usable)
[ 0.000000] BIOS-e820: 00000000c6efd000 - 00000000c730d000 (reserved)
[ 0.000000] BIOS-e820: 00000000c730d000 - 00000000c738d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c738d000 - 00000000c73ed000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c73ed000 - 00000000c7e00000 (usable)
[ 0.000000] BIOS-e820: 00000000c7e00000 - 00000000c8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 30515QG/30515QG, BIOS 8RET26WW (1.08 ) 06/20/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0FFF90000 mask FFFFF0000 uncachable
[ 0.000000] 4 base 0FED80000 mask FFFFFF000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xc7e00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7e00000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] kernel direct mapping tables up to c7e00000 @ 1fffe000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011f000000
[ 0.000000] 0100000000 - 011f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 11f000000 @ c7dfe000-c7e00000
[ 0.000000] RAMDISK: 37d69000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v04 LENOVO)
[ 0.000000] ACPI: XSDT 00000000c73ec120 00074 (v01 LENOVO TP-8R 00000003 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000c73da000 000F4 (v04 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000c73dc000 0EAF9 (v01 LENOVO TP-8R 00001000 PTEC 00001080)
[ 0.000000] ACPI: FACS 00000000c7378000 00040
[ 0.000000] ACPI: SLIC 00000000c73eb000 00176 (v01 LENOVO TP-8R 00001080 PTEC 00000001)
[ 0.000000] ACPI: HPET 00000000c73d9000 00038 (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000c73d8000 0005E (v02 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000c73d7000 0003C (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73d6000 0003E (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73d5000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000c73d4000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000c73d2000 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: UEFI 00000000c73d1000 0013E (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000011f000000
[ 0.000000] NODE_DATA [000000011effb000 - 000000011effffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ac00000-ffff88011e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000c6efd
[ 0.000000] 0: 0x000c73ed -> 0x000c7e00
[ 0.000000] 0: 0x00100000 -> 0x0011f000
[ 0.000000] On node 0 totalpages: 944285
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 797008 pages, LIFO batch:31
[ 0.000000] Normal zone: 1984 pages used for memmap
[ 0.000000] Normal zone: 124992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c6efd000 - 00000000c730d000
[ 0.000000] PM: Registered nosave memory: 00000000c730d000 - 00000000c738d000
[ 0.000000] PM: Registered nosave memory: 00000000c738d000 - 00000000c73ed000
[ 0.000000] PM: Registered nosave memory: 00000000c7e00000 - 00000000c8000000
[ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
[ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:36c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s82176 r8192 d24320 u1048576
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 925912
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3637724k/4702208k available (4496k kernel code, 925068k absent, 139416k reserved, 4326k data, 732k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 15204352 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.524 MHz processor.
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3194.09 BogoMIPS (lpj=5321746)
[ 0.003347] pid_max: default: 32768 minimum: 301
[ 0.003396] Security Framework initialized
[ 0.003405] AppArmor: AppArmor disabled by boot time parameter
[ 0.004113] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007521] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008760] Mount-cache hash table entries: 256
[ 0.009042] Initializing cgroup subsys cpuacct
[ 0.009050] Initializing cgroup subsys memory
[ 0.009069] Initializing cgroup subsys devices
[ 0.009073] Initializing cgroup subsys freezer
[ 0.009077] Initializing cgroup subsys net_cls
[ 0.009080] Initializing cgroup subsys blkio
[ 0.009143] tseg: 00c7e00000
[ 0.009147] CPU: Physical Processor ID: 0
[ 0.009150] CPU: Processor Core ID: 0
[ 0.009154] mce: CPU supports 6 MCE banks
[ 0.011336] ACPI: Core revision 20120111
[ 0.026703] ftrace: allocating 17489 entries in 69 pages
[ 0.037262] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071189] CPU0: AMD E-350 Processor stepping 00
[ 0.073329] Performance Events: AMD PMU driver.
[ 0.073329] ... version: 0
[ 0.073329] ... bit width: 48
[ 0.073329] ... generic registers: 4
[ 0.073329] ... value mask: 0000ffffffffffff
[ 0.073329] ... max period: 00007fffffffffff
[ 0.073329] ... fixed-purpose events: 0
[ 0.073329] ... event mask: 000000000000000f
[ 0.090166] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.116773] Booting Node 0, Processors #1 Ok.
[ 0.116781] smpboot cpu 1: start_ip = 98000
[ 0.130046] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.136704] Brought up 2 CPUs
[ 0.136716] Total of 2 processors activated (6388.18 BogoMIPS).
[ 0.137266] devtmpfs: initialized
[ 0.140921] PM: Registering ACPI NVS region at c730d000 (524288 bytes)
[ 0.141584] NET: Registered protocol family 16
[ 0.141951] ACPI: bus type pci registered
[ 0.142141] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
[ 0.142147] PCI: not using MMCONFIG
[ 0.142150] PCI: Using configuration type 1 for base access
[ 0.142153] PCI: Using configuration type 1 for extended access
[ 0.143469] bio: create slab <bio-0> at 0
[ 0.143469] ACPI: Added _OSI(Module Device)
[ 0.143469] ACPI: Added _OSI(Processor Device)
[ 0.143469] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.143469] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.146754] ACPI: EC: Look up EC in DSDT
[ 0.157302] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.161305] ACPI: Interpreter enabled
[ 0.161305] ACPI: (supports S0 S3 S4 S5)
[ 0.161305] ACPI: Using IOAPIC for interrupt routing
[ 0.161305] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
[ 0.163624] PCI: MMCONFIG at [mem 0xf8000000-0xf9ffffff] reserved in ACPI motherboard resources
[ 0.169819] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.175499] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.177428] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.177818] ACPI: No dock devices found.
[ 0.177828] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.180145] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.181866] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.181872] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c1fff]
[ 0.181877] pci_root PNP0A08:00: host bridge window [mem 0x000c2000-0x000c3fff]
[ 0.181881] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c5fff]
[ 0.181885] pci_root PNP0A08:00: host bridge window [mem 0x000c6000-0x000c7fff]
[ 0.181890] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000c9fff]
[ 0.181894] pci_root PNP0A08:00: host bridge window [mem 0x000ca000-0x000cbfff]
[ 0.181898] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cdfff]
[ 0.181902] pci_root PNP0A08:00: host bridge window [mem 0x000ce000-0x000cffff]
[ 0.181906] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff]
[ 0.181910] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff]
[ 0.181915] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff]
[ 0.181919] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff]
[ 0.181923] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff]
[ 0.181927] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff]
[ 0.181931] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff]
[ 0.181935] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff]
[ 0.181940] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e1fff]
[ 0.181944] pci_root PNP0A08:00: host bridge window [mem 0x000e2000-0x000e3fff]
[ 0.181948] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e5fff]
[ 0.181952] pci_root PNP0A08:00: host bridge window [mem 0x000e6000-0x000e7fff]
[ 0.181956] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000e9fff]
[ 0.181960] pci_root PNP0A08:00: host bridge window [mem 0x000ea000-0x000ebfff]
[ 0.181964] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000edfff]
[ 0.181968] pci_root PNP0A08:00: host bridge window [mem 0x000ee000-0x000effff]
[ 0.181973] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 0.181977] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xffffffff]
[ 0.181981] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.181985] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.182002] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
[ 0.182081] PCI host bridge to bus 0000:00
[ 0.182085] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.182090] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff]
[ 0.182094] pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff]
[ 0.182098] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff]
[ 0.182102] pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff]
[ 0.182106] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff]
[ 0.182110] pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff]
[ 0.182114] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff]
[ 0.182117] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
[ 0.182121] pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
[ 0.182125] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
[ 0.182129] pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
[ 0.182133] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
[ 0.182137] pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
[ 0.182141] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
[ 0.182144] pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff]
[ 0.182148] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
[ 0.182152] pci_bus 0000:00: root bus resource [mem 0x000e2000-0x000e3fff]
[ 0.182156] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e5fff]
[ 0.182160] pci_bus 0000:00: root bus resource [mem 0x000e6000-0x000e7fff]
[ 0.182164] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000e9fff]
[ 0.182168] pci_bus 0000:00: root bus resource [mem 0x000ea000-0x000ebfff]
[ 0.182172] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000edfff]
[ 0.182176] pci_bus 0000:00: root bus resource [mem 0x000ee000-0x000effff]
[ 0.182180] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
[ 0.182184] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffffffff]
[ 0.182187] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.182191] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.182208] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[ 0.182268] pci 0000:00:01.0: [1002:9802] type 0 class 0x000300
[ 0.182283] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.182294] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
[ 0.182304] pci 0000:00:01.0: reg 18: [mem 0xf0300000-0xf033ffff]
[ 0.182367] pci 0000:00:01.0: supports D1 D2
[ 0.182392] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[ 0.182405] pci 0000:00:01.1: reg 10: [mem 0xf0344000-0xf0347fff]
[ 0.182478] pci 0000:00:01.1: supports D1 D2
[ 0.182559] pci 0000:00:05.0: [1022:1513] type 1 class 0x000604
[ 0.182638] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.182671] pci 0000:00:06.0: [1022:1514] type 1 class 0x000604
[ 0.182749] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.182845] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.182872] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
[ 0.182886] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
[ 0.182900] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
[ 0.182915] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
[ 0.182929] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
[ 0.182943] pci 0000:00:11.0: reg 24: [mem 0xf034a000-0xf034a3ff]
[ 0.183027] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.183047] pci 0000:00:12.0: reg 10: [mem 0xf0349000-0xf0349fff]
[ 0.183144] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.183171] pci 0000:00:12.2: reg 10: [mem 0xf034a500-0xf034a5ff]
[ 0.183281] pci 0000:00:12.2: supports D1 D2
[ 0.183285] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.183337] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.183357] pci 0000:00:13.0: reg 10: [mem 0xf0348000-0xf0348fff]
[ 0.183455] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.183481] pci 0000:00:13.2: reg 10: [mem 0xf034a400-0xf034a4ff]
[ 0.183591] pci 0000:00:13.2: supports D1 D2
[ 0.183594] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.183629] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.183736] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.183767] pci 0000:00:14.2: reg 10: [mem 0xf0340000-0xf0343fff 64bit]
[ 0.183855] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.183879] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.183982] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.184052] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.184102] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.184146] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.184192] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.184251] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.184295] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.184339] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.184383] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.184555] pci 0000:01:00.0: [10ec:8176] type 0 class 0x000280
[ 0.184577] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.184612] pci 0000:01:00.0: reg 18: [mem 0xf0200000-0xf0203fff 64bit]
[ 0.184714] pci 0000:01:00.0: supports D1 D2
[ 0.184718] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.190067] pci 0000:00:05.0: PCI bridge to [bus 01-01]
[ 0.190089] pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
[ 0.190101] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.190192] pci 0000:02:00.0: [1969:1083] type 0 class 0x000200
[ 0.190224] pci 0000:02:00.0: reg 10: [mem 0xf0100000-0xf013ffff 64bit]
[ 0.190239] pci 0000:02:00.0: reg 18: [io 0x2000-0x207f]
[ 0.190356] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196733] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.196755] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.196767] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.196860] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.196875] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.196881] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c1fff] (subtractive decode)
[ 0.196885] pci 0000:00:14.4: bridge window [mem 0x000c2000-0x000c3fff] (subtractive decode)
[ 0.196890] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c5fff] (subtractive decode)
[ 0.196894] pci 0000:00:14.4: bridge window [mem 0x000c6000-0x000c7fff] (subtractive decode)
[ 0.196899] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000c9fff] (subtractive decode)
[ 0.196903] pci 0000:00:14.4: bridge window [mem 0x000ca000-0x000cbfff] (subtractive decode)
[ 0.196921] pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cdfff] (subtractive decode)
[ 0.196925] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
[ 0.196930] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
[ 0.196935] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
[ 0.196939] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
[ 0.196944] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
[ 0.196948] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
[ 0.196953] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
[ 0.196957] pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
[ 0.196962] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
[ 0.196966] pci 0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
[ 0.196971] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e5fff] (subtractive decode)
[ 0.196975] pci 0000:00:14.4: bridge window [mem 0x000e6000-0x000e7fff] (subtractive decode)
[ 0.196980] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000e9fff] (subtractive decode)
[ 0.196984] pci 0000:00:14.4: bridge window [mem 0x000ea000-0x000ebfff] (subtractive decode)
[ 0.196989] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000edfff] (subtractive decode)
[ 0.196993] pci 0000:00:14.4: bridge window [mem 0x000ee000-0x000effff] (subtractive decode)
[ 0.196998] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.197002] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xffffffff] (subtractive decode)
[ 0.197007] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.197011] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.197091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.197382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.197462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.197622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.197990] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.198396] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.207341] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
[ 0.207552] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
[ 0.207715] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
[ 0.207830] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
[ 0.207926] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
[ 0.208048] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
[ 0.208177] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
[ 0.208300] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
[ 0.208426] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.208426] vgaarb: loaded
[ 0.208426] vgaarb: bridge control possible 0000:00:01.0
[ 0.208426] PCI: Using ACPI for IRQ routing
[ 0.210067] PCI: pci_cache_line_size set to 64 bytes
[ 0.210205] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.210210] reserve RAM buffer: 00000000c6efd000 - 00000000c7ffffff
[ 0.210215] reserve RAM buffer: 00000000c7e00000 - 00000000c7ffffff
[ 0.210219] reserve RAM buffer: 000000011f000000 - 000000011fffffff
[ 0.210416] NetLabel: Initializing
[ 0.210420] NetLabel: domain hash size = 128
[ 0.210422] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.210446] NetLabel: unlabeled traffic allowed by default
[ 0.210504] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.210511] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.212540] Switching to clocksource hpet
[ 0.225756] pnp: PnP ACPI init
[ 0.225801] ACPI: bus type pnp registered
[ 0.226870] pnp 00:00: [bus 00-ff]
[ 0.226876] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.226881] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[ 0.226885] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[ 0.226889] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[ 0.226893] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[ 0.226897] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[ 0.226901] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[ 0.226904] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[ 0.226908] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[ 0.226912] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[ 0.226920] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[ 0.226924] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[ 0.226927] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[ 0.226931] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[ 0.226935] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[ 0.226938] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[ 0.226942] pnp 00:00: [mem 0x000de000-0x000dffff window]
[ 0.226946] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[ 0.226950] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[ 0.226953] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[ 0.226957] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[ 0.226961] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[ 0.226964] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[ 0.226968] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[ 0.226972] pnp 00:00: [mem 0x000ee000-0x000effff window]
[ 0.226976] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.226979] pnp 00:00: [mem 0xf8000000-0xffffffff window]
[ 0.226984] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.226987] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.226991] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.227102] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.227189] pnp 00:01: [io 0x0f50-0x0f51]
[ 0.227194] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.227198] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.227201] pnp 00:01: [mem 0xf8000000-0xf9ffffff]
[ 0.227291] system 00:01: [io 0x0f50-0x0f51] has been reserved
[ 0.227298] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.227303] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.227308] system 00:01: [mem 0xf8000000-0xf9ffffff] has been reserved
[ 0.227314] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228056] pnp 00:02: [io 0x0000-0x001f]
[ 0.228060] pnp 00:02: [io 0x0081-0x008f]
[ 0.228063] pnp 00:02: [io 0x00c0-0x00de]
[ 0.228066] pnp 00:02: [io 0x040b]
[ 0.228069] pnp 00:02: [io 0x04d6]
[ 0.228073] pnp 00:02: [dma 4]
[ 0.228138] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.228155] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.228221] pnp 00:03: [irq 13]
[ 0.228286] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.228306] pnp 00:04: [io 0x0070-0x0071]
[ 0.228361] pnp 00:04: [irq 8]
[ 0.228418] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.228434] pnp 00:05: [io 0x0061]
[ 0.228496] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.228516] pnp 00:06: [io 0x0060]
[ 0.228519] pnp 00:06: [io 0x0064]
[ 0.228528] pnp 00:06: [irq 1]
[ 0.228598] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.228686] pnp 00:07: [irq 12]
[ 0.228746] pnp 00:07: Plug and Play ACPI device, IDs LEN0026 PNP0f13 (active)
[ 0.228772] pnp 00:08: [io 0x0022-0x0023]
[ 0.228775] pnp 00:08: [io 0x002e-0x002f]
[ 0.228779] pnp 00:08: [io 0x0072-0x0073]
[ 0.228785] pnp 00:08: [io 0x0080]
[ 0.228789] pnp 00:08: [io 0x0092]
[ 0.228792] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.228795] pnp 00:08: [io 0x00b2]
[ 0.228798] pnp 00:08: [io 0x00b8]
[ 0.228801] pnp 00:08: [io 0x00bc]
[ 0.228804] pnp 00:08: [io 0x00f0]
[ 0.228807] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.228810] pnp 00:08: [io 0x0530-0x0537]
[ 0.228813] pnp 00:08: [io 0x0800-0x0827]
[ 0.228817] pnp 00:08: [io 0x0830]
[ 0.228820] pnp 00:08: [io 0x0840-0x0847]
[ 0.228823] pnp 00:08: [io 0x0b00-0x0b1f]
[ 0.228826] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.228829] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.228832] pnp 00:08: [io 0x0c14]
[ 0.228835] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.228839] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.228842] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.228845] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.228848] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.228851] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.228854] pnp 00:08: [io 0x0cf9]
[ 0.228858] pnp 00:08: [io 0x8100-0x81ff window]
[ 0.228862] pnp 00:08: [io 0x8200-0x82ff window]
[ 0.228977] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.228982] system 00:08: [io 0x0530-0x0537] has been reserved
[ 0.228987] system 00:08: [io 0x0800-0x0827] has been reserved
[ 0.228991] system 00:08: [io 0x0830] has been reserved
[ 0.228996] system 00:08: [io 0x0840-0x0847] has been reserved
[ 0.229000] system 00:08: [io 0x0b00-0x0b1f] has been reserved
[ 0.229005] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.229009] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.229014] system 00:08: [io 0x0c14] has been reserved
[ 0.229018] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.229023] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.229027] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.229032] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.229036] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.229041] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.229045] system 00:08: [io 0x0cf9] could not be reserved
[ 0.229050] system 00:08: [io 0x8100-0x81ff window] has been reserved
[ 0.229055] system 00:08: [io 0x8200-0x82ff window] has been reserved
[ 0.229061] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229217] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.229221] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 0.229225] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.229229] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[ 0.229233] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.229236] pnp 00:09: [mem 0xfed61000-0xfed613ff]
[ 0.229240] pnp 00:09: [mem 0xfed80000-0xfed80fff]
[ 0.229272] pnp 00:09: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xf8000000-0xf9ffffff]; adding more reservations
[ 0.229345] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.229351] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.229356] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.229360] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.229365] system 00:09: [mem 0xfed61000-0xfed613ff] has been reserved
[ 0.229370] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.229376] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.229807] pnp: PnP ACPI: found 10 devices
[ 0.229815] ACPI: ACPI bus type pnp unregistered
[ 0.242341] PCI: max bus depth: 1 pci_try_num: 2
[ 0.242430] pci 0000:00:05.0: PCI bridge to [bus 01-01]
[ 0.242437] pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
[ 0.242445] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.242455] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.242461] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.242467] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.242477] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.242564] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.242569] pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff]
[ 0.242573] pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff]
[ 0.242578] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff]
[ 0.242582] pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff]
[ 0.242586] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff]
[ 0.242590] pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff]
[ 0.242594] pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff]
[ 0.242598] pci_bus 0000:00: resource 12 [mem 0x000d0000-0x000d1fff]
[ 0.242602] pci_bus 0000:00: resource 13 [mem 0x000d2000-0x000d3fff]
[ 0.242606] pci_bus 0000:00: resource 14 [mem 0x000d4000-0x000d5fff]
[ 0.242610] pci_bus 0000:00: resource 15 [mem 0x000d6000-0x000d7fff]
[ 0.242614] pci_bus 0000:00: resource 16 [mem 0x000d8000-0x000d9fff]
[ 0.242618] pci_bus 0000:00: resource 17 [mem 0x000da000-0x000dbfff]
[ 0.242622] pci_bus 0000:00: resource 18 [mem 0x000dc000-0x000ddfff]
[ 0.242626] pci_bus 0000:00: resource 19 [mem 0x000de000-0x000dffff]
[ 0.242629] pci_bus 0000:00: resource 20 [mem 0x000e0000-0x000e1fff]
[ 0.242633] pci_bus 0000:00: resource 21 [mem 0x000e2000-0x000e3fff]
[ 0.242637] pci_bus 0000:00: resource 22 [mem 0x000e4000-0x000e5fff]
[ 0.242641] pci_bus 0000:00: resource 23 [mem 0x000e6000-0x000e7fff]
[ 0.242645] pci_bus 0000:00: resource 24 [mem 0x000e8000-0x000e9fff]
[ 0.242649] pci_bus 0000:00: resource 25 [mem 0x000ea000-0x000ebfff]
[ 0.242653] pci_bus 0000:00: resource 26 [mem 0x000ec000-0x000edfff]
[ 0.242657] pci_bus 0000:00: resource 27 [mem 0x000ee000-0x000effff]
[ 0.242661] pci_bus 0000:00: resource 28 [mem 0xe0000000-0xf7ffffff]
[ 0.242665] pci_bus 0000:00: resource 29 [mem 0xf8000000-0xffffffff]
[ 0.242669] pci_bus 0000:00: resource 30 [io 0x0000-0x0cf7]
[ 0.242673] pci_bus 0000:00: resource 31 [io 0x0d00-0xffff]
[ 0.242677] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.242681] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.242685] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.242689] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.242694] pci_bus 0000:04: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.242698] pci_bus 0000:04: resource 5 [mem 0x000c0000-0x000c1fff]
[ 0.242702] pci_bus 0000:04: resource 6 [mem 0x000c2000-0x000c3fff]
[ 0.242706] pci_bus 0000:04: resource 7 [mem 0x000c4000-0x000c5fff]
[ 0.242711] pci_bus 0000:04: resource 8 [mem 0x000c6000-0x000c7fff]
[ 0.242715] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000c9fff]
[ 0.242719] pci_bus 0000:04: resource 10 [mem 0x000ca000-0x000cbfff]
[ 0.242723] pci_bus 0000:04: resource 11 [mem 0x000cc000-0x000cdfff]
[ 0.242727] pci_bus 0000:04: resource 12 [mem 0x000d0000-0x000d1fff]
[ 0.242731] pci_bus 0000:04: resource 13 [mem 0x000d2000-0x000d3fff]
[ 0.242735] pci_bus 0000:04: resource 14 [mem 0x000d4000-0x000d5fff]
[ 0.242739] pci_bus 0000:04: resource 15 [mem 0x000d6000-0x000d7fff]
[ 0.242743] pci_bus 0000:04: resource 16 [mem 0x000d8000-0x000d9fff]
[ 0.242746] pci_bus 0000:04: resource 17 [mem 0x000da000-0x000dbfff]
[ 0.242750] pci_bus 0000:04: resource 18 [mem 0x000dc000-0x000ddfff]
[ 0.242755] pci_bus 0000:04: resource 19 [mem 0x000de000-0x000dffff]
[ 0.242759] pci_bus 0000:04: resource 20 [mem 0x000e0000-0x000e1fff]
[ 0.242763] pci_bus 0000:04: resource 21 [mem 0x000e2000-0x000e3fff]
[ 0.242767] pci_bus 0000:04: resource 22 [mem 0x000e4000-0x000e5fff]
[ 0.242771] pci_bus 0000:04: resource 23 [mem 0x000e6000-0x000e7fff]
[ 0.242775] pci_bus 0000:04: resource 24 [mem 0x000e8000-0x000e9fff]
[ 0.242779] pci_bus 0000:04: resource 25 [mem 0x000ea000-0x000ebfff]
[ 0.242783] pci_bus 0000:04: resource 26 [mem 0x000ec000-0x000edfff]
[ 0.242787] pci_bus 0000:04: resource 27 [mem 0x000ee000-0x000effff]
[ 0.242791] pci_bus 0000:04: resource 28 [mem 0xe0000000-0xf7ffffff]
[ 0.242795] pci_bus 0000:04: resource 29 [mem 0xf8000000-0xffffffff]
[ 0.242799] pci_bus 0000:04: resource 30 [io 0x0000-0x0cf7]
[ 0.242803] pci_bus 0000:04: resource 31 [io 0x0d00-0xffff]
[ 0.242879] NET: Registered protocol family 2
[ 0.243147] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.245284] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.250181] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.250766] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.250771] TCP reno registered
[ 0.250804] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.250858] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.251058] NET: Registered protocol family 1
[ 0.251088] pci 0000:00:01.0: Boot video device
[ 0.383864] PCI: CLS 32 bytes, default 64
[ 0.383965] Unpacking initramfs...
[ 0.478532] Freeing initrd memory: 2588k freed
[ 0.480190] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.480198] Placing 64MB software IO TLB between ffff8800c2efd000 - ffff8800c6efd000
[ 0.480203] software IO TLB at phys 0xc2efd000 - 0xc6efd000
[ 0.480963] perf: AMD IBS detected (0x000000ff)
[ 0.481379] audit: initializing netlink socket (disabled)
[ 0.481404] type=2000 audit(1339340302.479:1): initialized
[ 0.482558] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.487036] VFS: Disk quotas dquot_6.5.2
[ 0.487152] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.487326] msgmni has been set to 7109
[ 0.487931] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.488040] io scheduler noop registered
[ 0.488044] io scheduler deadline registered
[ 0.488154] io scheduler cfq registered (default)
[ 0.488395] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[ 0.488550] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.488682] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 0.488687] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.488694] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 0.488719] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 0.488723] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.488729] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 0.488942] GHES: HEST is not enabled!
[ 0.489246] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.490367] Linux agpgart interface v0.103
[ 0.490508] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.492943] i8042: Detected active multiplexing controller, rev 1.1
[ 0.496025] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.496088] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.496136] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.496180] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.496225] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.496472] mousedev: PS/2 mouse device common for all mice
[ 0.496667] rtc_cmos 00:04: RTC can wake from S4
[ 0.497028] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.497119] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.497144] cpuidle: using governor ladder
[ 0.497148] cpuidle: using governor menu
[ 0.497476] TCP cubic registered
[ 0.497700] NET: Registered protocol family 10
[ 0.498445] NET: Registered protocol family 17
[ 0.498453] Registering the dns_resolver key type
[ 0.499372] PM: Hibernation image not present or could not be loaded.
[ 0.499393] registered taskstats version 1
[ 0.500327] rtc_cmos 00:04: setting system clock to 2012-06-10 14:58:23 UTC (1339340303)
[ 0.500417] Initializing network drop monitor service
[ 0.502828] Freeing unused kernel memory: 732k freed
[ 0.503217] Write protecting the kernel read-only data: 8192k
[ 0.513112] Freeing unused kernel memory: 1628k freed
[ 0.518185] Freeing unused kernel memory: 656k freed
[ 0.536071] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.539774] udevd[37]: starting version 184
[ 0.613296] usbcore: registered new interface driver usbfs
[ 0.613442] usbcore: registered new interface driver hub
[ 0.619684] usbcore: registered new device driver usb
[ 0.620711] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.621584] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.621640] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.621702] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.621746] QUIRK: Enable AMD PLL fix
[ 0.621810] ehci_hcd 0000:00:12.2: debug port 1
[ 0.621850] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf034a500
[ 0.630117] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.630310] SCSI subsystem initialized
[ 0.636369] hub 1-0:1.0: USB hub found
[ 0.636381] hub 1-0:1.0: 5 ports detected
[ 0.636783] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.636805] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.636818] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.636859] ehci_hcd 0000:00:13.2: debug port 1
[ 0.636884] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf034a400
[ 0.637204] libata version 3.00 loaded.
[ 0.640574] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.646781] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.647066] hub 2-0:1.0: USB hub found
[ 0.647076] hub 2-0:1.0: 5 ports detected
[ 0.647328] ahci 0000:00:11.0: version 3.0
[ 0.647600] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 0.647608] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 0.648432] scsi0 : ahci
[ 0.648735] ata1: SATA max UDMA/133 abar m1024@0xf034a000 port 0xf034a100 irq 19
[ 0.648890] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.648918] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.649020] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0349000
[ 0.704676] hub 3-0:1.0: USB hub found
[ 0.704691] hub 3-0:1.0: 5 ports detected
[ 0.706337] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.706357] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 0.706392] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0348000
[ 0.761543] hub 4-0:1.0: USB hub found
[ 0.761558] hub 4-0:1.0: 5 ports detected
[ 1.137007] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.138642] ata1.00: ATA-8: HITACHI HTS723232A7A364, EC2ZB70B, max UDMA/100
[ 1.138651] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.140067] ata1.00: configured for UDMA/100
[ 1.140658] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72323 EC2Z PQ: 0 ANSI: 5
[ 1.144742] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.144844] sd 0:0:0:0: [sda] Write Protect is off
[ 1.144850] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.144893] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.185183] sda: sda1 sda2 sda3 sda4
[ 1.187123] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.483438] Refined TSC clocksource calibration: 1596.599 MHz.
[ 1.483459] Switching to clocksource tsc
[ 1.820777] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.075750] udevd[314]: starting version 185
[ 4.538235] cfg80211: Calling CRDA to update world regulatory domain
[ 4.618824] Using firmware rtlwifi/rtl8192cfw.bin
[ 4.664522] ACPI: acpi_idle registered with cpuidle
[ 4.677193] powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
[ 4.677322] powernow-k8: 0 : pstate 0 (1600 MHz)
[ 4.677326] powernow-k8: 1 : pstate 1 (1280 MHz)
[ 4.677329] powernow-k8: 2 : pstate 2 (800 MHz)
[ 5.014794] ACPI: AC Adapter [ACAD] (on-line)
[ 5.015426] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.015836] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 5.016050] ACPI: Power Button [PWRB]
[ 5.016149] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 5.016283] ACPI: Sleep Button [SLPB]
[ 5.016405] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 5.033809] ACPI: Lid Switch [LID]
[ 5.033969] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.034129] ACPI: Power Button [PWRF]
[ 5.047632] acpi device:34: registered as cooling_device2
[ 5.051373] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
[ 5.051525] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 5.076994] ACPI: Battery Slot [BAT1] (battery present)
[ 5.131780] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.131788] ACPI: Thermal Zone [THZ0] (43 C)
[ 5.142726] wmi: Mapper loaded
[ 5.157792] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.227665] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.227836] SP5100 TCO timer: mmio address 0xb80830 already in use
[ 5.363443] Non-volatile memory driver v1.3
[ 5.428563] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
[ 5.450972] [drm] Initialized drm 1.1.0 20060810
[ 5.527616] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 5.529303] rtlwifi: wireless switch is on
[ 5.694564] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 5.694576] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.694582] thinkpad_acpi: ThinkPad BIOS 8RET26WW (1.08 ), EC unknown
[ 5.694590] thinkpad_acpi: Lenovo ThinkPad X120e, model 30515QG
[ 5.697439] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 5.698186] thinkpad_acpi: radio switch found; radios are enabled
[ 5.698221] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 5.700698] Registered led device: tpacpi::power
[ 5.700736] Registered led device: tpacpi::standby
[ 5.700775] Registered led device: tpacpi::thinkvantage
[ 5.702194] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.703379] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.708361] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 5.766552] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMB_.SMB0 1 (20120111/utaddress-251)
[ 5.766583] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.767192] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
[ 5.780051] [drm] radeon defaulting to kernel modesetting.
[ 5.780059] [drm] radeon kernel modesetting enabled.
[ 5.817461] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 5.817754] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 6.023285] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[ 6.032362] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x17AA:0x21EC).
[ 6.033956] [drm] register mmio base: 0xF0300000
[ 6.033959] [drm] register mmio size: 262144
[ 6.034116] ATOM BIOS: Lenovo
[ 6.034164] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 6.034170] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
[ 6.034639] [drm] Detected VRAM RAM=384M, BAR=256M
[ 6.034646] [drm] RAM width 32bits DDR
[ 6.037931] [TTM] Zone kernel: Available graphics memory: 1821664 kiB.
[ 6.037938] [TTM] Initializing pool allocator.
[ 6.037949] [TTM] Initializing DMA pool allocator.
[ 6.038006] [drm] radeon: 384M of VRAM memory ready
[ 6.038010] [drm] radeon: 512M of GTT memory ready.
[ 6.038055] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.038059] [drm] Driver supports precise vblank timestamp query.
[ 6.038123] radeon 0000:00:01.0: irq 43 for MSI/MSI-X
[ 6.038144] radeon 0000:00:01.0: radeon: using MSI.
[ 6.038191] [drm] radeon: irq initialized.
[ 6.038201] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.041298] [drm] radeon: ib pool ready.
[ 6.043305] [drm] Loading PALM Microcode
[ 6.088021] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 6.088318] radeon 0000:00:01.0: WB enabled
[ 6.088330] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffff880118705c00
[ 6.110048] [drm] ring test on 0 succeeded in 1 usecs
[ 6.111109] [drm] ib test on ring 0 succeeded in 0 usecs
[ 6.111934] [drm] Radeon Display Connectors
[ 6.111938] [drm] Connector 0:
[ 6.111940] [drm] LVDS
[ 6.111943] [drm] HPD1
[ 6.111947] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 6.111950] [drm] Encoders:
[ 6.111953] [drm] LCD1: INTERNAL_UNIPHY
[ 6.111956] [drm] Connector 1:
[ 6.111958] [drm] HDMI-A
[ 6.111960] [drm] HPD2
[ 6.111964] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 6.111967] [drm] Encoders:
[ 6.111969] [drm] DFP1: INTERNAL_UNIPHY
[ 6.111971] [drm] Connector 2:
[ 6.111973] [drm] VGA
[ 6.111977] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 6.111980] [drm] Encoders:
[ 6.111982] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.112043] [drm] Internal thermal controller without fan control
[ 6.112128] [drm] radeon: power management initialized
[ 6.151134] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x121c00
[ 6.151161] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 6.194596] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[ 6.588128] [drm] fb mappable at 0xE0142000
[ 6.588135] [drm] vram apper at 0xE0000000
[ 6.588139] [drm] size 4325376
[ 6.588142] [drm] fb depth is 24
[ 6.588145] [drm] pitch is 5632
[ 6.588616] fbcon: radeondrmfb (fb0) is primary device
[ 7.109264] Console: switching to colour frame buffer device 170x48
[ 7.118245] fb0: radeondrmfb frame buffer device
[ 7.118248] drm: registered panic notifier
[ 7.118262] [drm] Initialized radeon 2.13.0 20080528 for 0000:00:01.0 on minor 0
[ 7.852228] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 7.961705] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 8.003845] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 8.011207] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 8.094702] Adding 15623208k swap on /dev/sda2. Priority:-1 extents:1 across:15623208k
[ 9.918662] atl1c 0000:02:00.0: irq 44 for MSI/MSI-X
[ 9.999979] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.082650] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 12.315710] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input11
[ 13.383760] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.701075] wlan0: authenticate with 0c:60:76:4a:8c:44 (try 1)
[ 15.702630] wlan0: authenticated
[ 15.725379] wlan0: associate with 0c:60:76:4a:8c:44 (try 1)
[ 15.728291] wlan0: RX AssocResp from 0c:60:76:4a:8c:44 (capab=0x411 status=0 aid=2)
[ 15.728299] wlan0: associated
[ 15.728306] wlan0: moving STA 0c:60:76:4a:8c:44 to state 1
[ 15.728310] wlan0: moving STA 0c:60:76:4a:8c:44 to state 2
[ 15.729381] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.085499] EXT4-fs (sda3): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
[ 16.126474] Intel AES-NI instructions are not detected.
[ 16.133570] EXT4-fs (sda4): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
[ 16.140127] wlan0: moving STA 0c:60:76:4a:8c:44 to state 3
[ 16.184502] EXT4-fs (sda1): re-mounted. Opts: user_xattr,acl,barrier=1
[ 24.359763] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 24.565842] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 26.590021] wlan0: no IPv6 routers present
[ 42.605282] fuse init (API version 7.18)
dmesg with a non-working trackpoint:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012
[ 0.000000] Command line: root=/dev/sda3 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c6efd000 (usable)
[ 0.000000] BIOS-e820: 00000000c6efd000 - 00000000c730d000 (reserved)
[ 0.000000] BIOS-e820: 00000000c730d000 - 00000000c738d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c738d000 - 00000000c73ed000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c73ed000 - 00000000c7e00000 (usable)
[ 0.000000] BIOS-e820: 00000000c7e00000 - 00000000c8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 30515QG/30515QG, BIOS 8RET26WW (1.08 ) 06/20/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0FFF90000 mask FFFFF0000 uncachable
[ 0.000000] 4 base 0FED80000 mask FFFFFF000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xc7e00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7e00000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] kernel direct mapping tables up to c7e00000 @ 1fffe000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011f000000
[ 0.000000] 0100000000 - 011f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 11f000000 @ c7dfe000-c7e00000
[ 0.000000] RAMDISK: 37d69000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v04 LENOVO)
[ 0.000000] ACPI: XSDT 00000000c73ec120 00074 (v01 LENOVO TP-8R 00000003 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000c73da000 000F4 (v04 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000c73dc000 0EAF9 (v01 LENOVO TP-8R 00001000 PTEC 00001080)
[ 0.000000] ACPI: FACS 00000000c7378000 00040
[ 0.000000] ACPI: SLIC 00000000c73eb000 00176 (v01 LENOVO TP-8R 00001080 PTEC 00000001)
[ 0.000000] ACPI: HPET 00000000c73d9000 00038 (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000c73d8000 0005E (v02 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000c73d7000 0003C (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73d6000 0003E (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73d5000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000c73d4000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000c73d2000 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: UEFI 00000000c73d1000 0013E (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000011f000000
[ 0.000000] NODE_DATA [000000011effb000 - 000000011effffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ac00000-ffff88011e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000c6efd
[ 0.000000] 0: 0x000c73ed -> 0x000c7e00
[ 0.000000] 0: 0x00100000 -> 0x0011f000
[ 0.000000] On node 0 totalpages: 944285
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 797008 pages, LIFO batch:31
[ 0.000000] Normal zone: 1984 pages used for memmap
[ 0.000000] Normal zone: 124992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c6efd000 - 00000000c730d000
[ 0.000000] PM: Registered nosave memory: 00000000c730d000 - 00000000c738d000
[ 0.000000] PM: Registered nosave memory: 00000000c738d000 - 00000000c73ed000
[ 0.000000] PM: Registered nosave memory: 00000000c7e00000 - 00000000c8000000
[ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
[ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:36c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s82176 r8192 d24320 u1048576
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 925912
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3637724k/4702208k available (4496k kernel code, 925068k absent, 139416k reserved, 4326k data, 732k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 15204352 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgrOK, ignore my last post pointing the finger at udev.
I poked around in the kernel code; it was actually kinda fun. Now this looks more like either a hardware problem (unlikely) or a driver bug (more likely) to me:
http://ubuntuforums.org/showthread.php?t=1894892
Thought I'd pass along what I found.
During a boot, the kernel will "walk" all the buses looking for devices. The methods used to find them on some buses (like PCI) are well defined, while others are not (like the serial bus). On those buses that aren't well defined the kernel will (probably) literally "probe" the bus trying to not only find a device, but also determine the exact chip installed.
It's the second case that's involved in your problem. The serio driver found the Synaptics touchpad device (via probing). If you look closely at the kernel log, you'll see it's attached to your i8042 (PS/2) chip. But... since this touchpad device has a "passthru port", it has to perform extra steps to determine if there's a chip on the "other side" of that touchpad chip. In your case there is, and it's your Trackpoint.
If it's successful in finding the Trackpoint chip, the drivers/input/mouse/trackpoint.c kernel driver file will put the following in your syslog:
IBM TrackPoint firmware: 0x0e, buttons: 3/3
Which is what you see in your logs when it works. Since you don't see it when it fails, then the code probably isn't being executed or it's failing with an error condition.
Now... when a driver finds a device, it usually (but not always) creates some virtual "files" in the /sys directory... and that's what will happen if that trackpoint.c code is executed...
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input11
So... one question is... "Does it create something in /sys when it fails?". From looking at the code, I highly doubt it.
Although this looks somewhat improbable, if the error path for this section of the code in the trackpoint_detect function of /drivers/input/mouse/trackpoint.c file is executed then it looks like it might match your error:
psmouse->private = kzalloc(sizeof(struct trackpoint_data), GFP_KERNEL);
if (!psmouse->private)
return -ENOMEM;
Perhaps you might want to put some sort of printk call in there to see if that's what's happening. Heck, also add one to the top of the function to see if it's even being called.
Good luck. -
Hi.
I have a Lenovo X61 ThinkPad and am having trouble with my external drive being recognized when connected.
The external drive does, in fact, work. I have connected it to another laptop to see if it was okay, and it's fine.
The support tech guy at Maxtor said that I probably need to update my driver for "chipset." Well, first, I really don't know what "chipset" is. And how do I know if I already have the most current driver already?
I bought this laptop about a month and a half ago directly from Lenovo, so I thought it would be very updated on everything. The only thing that I did was downgrade to XP.
The tech guy also said to install .netframework to 3.0 first and then 3.5.
Everything was working fine with external hard drive until now.
Thank you very much for your help.Quote from: HenryW on 12-August-07, 08:15:55
Hey Jack did you read the whole thing?
Obviously not good enough. I had a look at the official BIOS update changelogs and saw that v1.2 included fixes that have to do with S3.
Quote
thought S1 was for sleep and S3 for hibernate.
Not exactly. Just to make sure we are all talking about the same thing:
Most common Important ACPI Standby-States:
- S1
This is the most shallow sleep state. Power to CPU and RAM are maintained, fans keep spinning.
- S3 (Suspend to RAM)
Power to RAM is maintained.
- S4 (Suspend to disk, Hibernate)
All content of main memory is saved on the hard drive, preserving the state of the operating system, all applications, open documents etc. After everything was saved to disk, the system will turn off.
If I am not mistaken, all you can do in BIOS is choose between S1 and S3. In Vista you should be able to choose beetween Standby/suspend (S1 or S3, depending on BIOS settings) and Hibernate (S4).
So again, which of the three states are you referring to? -
Lenovo ThinkPad W530 (2441-4R3) specs
I've been trying in vain to get the specifications for the Lenovo ThinkPad W530 (2441-4R3). Lenovo's Customer Support and Tech. Support could not help me with this issue. I would appreciate at if someone would please send me the specification for this model (MTM)? Thanks. Darren
Solved!
Go to Solution.according to the lenovo website, you have the following spec.
i7-3740QM(3.70GHz),8GB RAM,180GB Solid State Drive,15.6in 1920x1080 LCD,2GB NVIDIA Quadro K2000M,DVD Recordable,Intel 802.11agn wireless,WWAN Upgradable,1Gb Ethernet,UltraNav,Secure Chip,Camera,9c Li-Ion,Win7 Pro 64
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft
Maybe you are looking for
-
This is my first AppleScript Studio app so please be gentle. part of my script checks to see what applications are running. If there are applications running that shouldn't be then I want an error window to appear. If the check is OK I want a differe
-
Iam wanting to check what power my graphics card is using was looking at the zelman zm-vpm 1 My 7950 has the 6+8 pcie which I think can use up to about 340 watts is and the zelman only does up to 240w so would I be able to use two of them or does any
-
Run Forms non interactively (Oracle 8i)
Is it possible to run a form in "batch" mode, that is non-interactively? The reason for this request is that the application is a turn-key system and I need to load a application file. The vendor has provided a load file screen but I want to run this
-
Hello all, We are working with CDB 10.2.0.0.0 and the GRID CONTROL AGENT 10.2 is installed so we would like to know some best practices, experiences, implemented tests,... that you can share after working with these products. Our aim is to have a lar
-
Hi all, I need some help with the 11g install on windows 2003 database server. We already have 10gR2 software with few development databases running on this server. I am trying to find out the pros and cons if I install 11g on a different drive on th