I want help about to connect 7.1 inspire T7900 to the DVD

i am looking for the above subject help, becoz of unavilabel of decode ddts 100 in any part of the world. player (5.1 dolby o/p,silvercrest KH 650/)?

The 650/ has 5.1 analog outputs, just follow the instructions on this thread. That will only get you 5.1, but unless you buy some form of decoder thats the best you will get. Most dvds dont have 6.1/7.1 anyway.

Similar Messages

Help a newb connect his power supply cables to the MSI Z97 XPower AC?

My Background
I am mostly a software kind of guy, and this is my first time building a computer. I saved lots of money, did lots of research, and picked my parts.
So far, I've installed my CPU & Fan to the Motherboard, and mounted them to the case.
Now it's time to install my Power Supply. Mounting it to the case is easy. The problem comes when I have to connect the cables. The manuals don't explain the purpose of these cables or provide "step-by-step" instructions.
I've been searching for over an hour, but can't get a clear idea of what I'm supposed to do. So I'm hoping someone can help me here.
Hardware
Motherboard: MSI Z97 XPOWER AC
Power Supply: Seasonic X-1250
(EDIT: Forum does not let me link to the manuals, so for anyone who needs...please look online)
Problem
On page 29 of my motherboard manual, it shows 4 different power connection slots (JPWR1, JPWR2, JPWR3, JPWR4). Unfortunately, it doesn't explain what goes in them.
On page 59 & 61 of my Power Supply manual, there is listing of all the key cables.
I think the "Mainboard 24/20 Pin" cable goes into the "JPWR1" slot.
- So I am mostly confused about the other slots (JPWR2, JPWR3, JPWR4).
- Also, it's confusing that there are two CPU cables called "CPU 8/4 Pin" & "CPU 8 Pin".
Can anyone help me?

Quote from: myfamilyshopping on 24-March-15, 20:00:38
Hi guys, I have a follow-up question about my Seasonic PSU "PCI-E cables".
The way my PCI-E cables are designed is...
There's one end which is a single cable with a 12 hole connector...that goes into the PCI-E port on my power supply.
But then the other end splits out into two different cables, with each having a sort of 6/2 connector.
So regarding the end that splits out into two different cables...
Can each be used on different PCI-E devices?
Or is it the case that because my PSU has 3 PCI-E ports (and 3 of the cables I described)...that only 3 PCI-E devices can be powered?
all can be used however you plan to use them! all them connectors are tied to a single 104amp +12v Rail so they are getting power off a single Rail!
as long as what you plug them into do not exceed the Rail's ratings your fine (would take quite a few Graphics cards to get above that) (basically if it works it works) (would take like 2 R9-295x2's or 4 R9-290X's to get to that point)

I want to upgrade iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with the 15" MacBook Pro that totally died, and upgrade iMac from that DVD

I want to upgrade my iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with my purchase of the 15" MacBook Pro that totally died, and upgrade the iMac from that DVD that came with the laptop ? Thanks

No, that 10.6.3 DVD is system specific to the MacBook Pro.
You need a Snow Leopard Upgrade > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
or if a MobileMe users > Apple throws MobileMe users a free version of Snow Leopard

Hi, everyone. I want help about CTS android app v1.1

Hi, everyone here.
Would you like to send me a cisco technical support android version 1.1 app pack attachment to my email address: [email protected]? I'm in Beijing, China, so I can't download this app from google market because the filtering policy by goverment.
Kind Regards.
janxuan.

Ok, that's been sattle down today by downloading this app from 1mobile.com, thanks a lot to everyone here!
best regsrds
Sent from Cisco Technical Support Android App

I have a new iMac i want to install adobe photoshop elements 10, I only have the DVDs. Is there another way of installing this software?

I have just bought the latest 27 inch imac. I tried to install my adobe photoshop elements 10 dvd and found no drive. Is there any other way to install this software onto the computer? It is already installed on my macbook pro, is there an option to transfer the files?

No I meant to "borrow" the other Mac's optical drive, with the new Mac as the Target. cornelius puts it succinctly here, except we're not talking about a Mac with a broken drive. And you would select the Adobe DVD, not the "install disc."
I suggest that you get a firewire cable. Then boot the computer with the working optical drive into Firewire Target Disk Mode, startup the computer with the broken drive and hold down the Option key. Then select the install disk as boot and startup and proceed with installation.
https://discussions.apple.com/message/11874414#11874414
Actually, I think cornelius's post isn't exactly what's required, but I think you get the idea.
Message was edited by: WZZZ

Unexisted help or drivers or troubleshooting for inspire T7900

I have recently bought the soundsystem of Creative Inc. Inspire T7900 and since then I have not managed to install it normally . Soundmax Blackhawk recognise 6 of the 8 speakers (including the subwoofer ) windows media and generally the players use 2 speakers and the subwoofer and the video games have no sound which means nothing functions , 0 speakers . I don't know what to do no matter how consistently i have searched the web . Even the site of the company has not any drivers,updates or troubleshooting for this product . I am fully outraged and disappointed from Creative

xameleon,
Setting up the sound and getting sound from more than 2 speakers is down your soundcard/audiochip, not the speakers themselves. The speakers do not use drivers, they don't use software, that is all done by the soundcard. You need to check your soundchip's settings, and probably check the manual for your motherboard (or check with the support of the company you bought the PC from, if it was pre-built).
Cat

Help needed in Connecting to SAP From Eclipse

Hi All,
Currently, we have a requirement where we need to retrieve data from SAP System and need to upload the same in a Third Party Application (Java based system).
We are able to create an account in Java Application using Eclipse IDE by hard coding the Account details. We are stuck up in establishing the SAP connection and retrieving the details and then creating the extracted account details in Java application from Eclipse.
Any pointers on this will be of great help.
Regards,
Eureka

Hi Eureka,
Please refrain from creating cross-posts in parallel forums, moreover this question is JCo-related and is not directly connected with Java EE 5. The Help needed in Connecting to SAP From Eclipse in the Java Programming forum would be enough. Please continue the discussion there.
Regards,
Vladimir

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?

When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?

Hello there, RobenCaatje.
The following Knowledge Base article is specific for the issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Specifically:
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Want to upgrade to lastest version - help/about Firefox window does not show "upgrade" as in instructions.

I want to upgrade to latest version but -Help/About Firefox- window does not show "upgrade" as in the instructions. I cannot find an "upgrade" function anywhere else. How do I upgrade? The version I have is -18.0.1- it came with this used computer.
I believe this computer was hacked. Word started doing very strange things. We wiped the hard drive and reloaded everything as it was originally when I bought it. I am now getting hacked online.
They originally got into one of my credit cards last fall. That is when this all started. They got my AOL email address. They also got the credit card current balance, minimum payment, due date and then even the payment amount. They got into my Barnes & Noble account and now checkout does not work. Now I believe they have gotten into my AOL account - one thing after another has started going wrong. I cannot change that AOL user id/email address since it is the master and I would lose about 15 years of "stuff".
The folks that sold me this computer told me to use a free version of an antivirus. I am very unhappy with it. I never had ANY trouble when I used TrendMicro's expense products. Those folks also told me to use Firefox, since AOL uses Internet Explorer - which I already knew is like Swiss cheese.
Now, I cannot seem to get an upgrade of Firefox. Is this also a hack?
Please help any way you can. Thank you for your time.

It's probably just the Firefox updater having some problems. go to www.getfirefox.com and download Firefox 20.0.1

Bought PE 13, installation and registration OK. Want to access 'Help / first steps...(as well as the other options): always get message: no connection to the Internet. Which is obviously not true!!

I can only repeat: I Bought PE 13, installation and registration OK. Want to access 'Help / first steps'...(as well as the other options): always get message: no connection to the Internet. Which is obviously not true!!
hakune
P.S. the way to get through to be able to post my problem is not very userfriendly.

Pe won't contact net please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection error between the computer and our activation servers.

Help me about oracle connect poo in wls5.1l!!

Help!
I can not create oracle connection pool using the following
directive in my weblogic.properties of wls5.1:
weblogic.jdbc.connectionPool.oraclePool=\
url=jdbc:oracle:thin:@oracle.myserver.com:1521:mydb,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=1,\
maxCapacity=10,\
capacityIncrement=1,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=10,\
testTable=house_dict,\
props=user=system;password=******;server=mydb
But I can connect to the database in my servlet/jsp using oracle:thin
connect method, Why???
The library I used is oracle's classes111.zip
Help me please!!!!

Remove the ';server=mydb' from the props.
It would help if you included the error message from the weblogic log file.
Mike
"Killwin" <[email protected]> wrote:
Help!
I can not create oracle connection pool using the following
directive in my weblogic.properties of wls5.1:
weblogic.jdbc.connectionPool.oraclePool=\
url=jdbc:oracle:thin:@oracle.myserver.com:1521:mydb,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=1,\
maxCapacity=10,\
capacityIncrement=1,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=10,\
testTable=house_dict,\
props=user=system;password=******;server=mydb
But I can connect to the database in my servlet/jsp using oracle:thin
connect method, Why???
The library I used is oracle's classes111.zip
Help me please!!!!

Need Help About Connection Pooling

I am new to WebLogic.
We have a Java based application hosted on WebLogic 6.1.
We have not used any Database Pooling utility.
We are just creating connection objects in JSP/Java files (Worst!!).
Now we want to use Database Connection Pooling facility of WebLogic.
So now if I create connection pool from WebLogic console, the database connection pooling will be automatically handle by WebLogic OR I have to develop a class using Database Pooling package of the WebLogic and than need to use that class in all file where I am accessing database.
Reg,
Chetan

Chetan,
Once you have created a connection pool using the console the next thing to do is create a datasource with a JNDIname that uses that pool.
Then you can write a ServiceLocator to use JNDI to encapsulate the lookup code and cache the datasource, finally and you can use the datasource to retrieve connections from your connection pool.
By creating a datasource you decouple your apoplication from connection pools making it more flexible. If you don't like ServiceLocators you can always use something like the spring framework to hide all the plumbing.
For some example code to connect to a datasource see:
http://e-docs.bea.com/wls/docs81/jdbc/programming.html#1056955
For a description of the service locator see:
http://java.sun.com/blueprints/corej2eepatterns/Patterns/ServiceLocator.html
And for completeness
http://www.springframework.org/
Cheers
Hussein Badakhchani
www.orbism.com

Please I want your help about Nokia 6670

Hi freinds,
I have nokia 6670 , by mestake and when am talking with some freind on the house phone and my mobile(6670) in my hand I recived a meesage and i want to delete it so by mestake i determine all the messages at in box and all my messages are deleted :"( , I lost avery much important messages, so
PLEASE any one can help me to returned my messages , is there any programmes to returned
regadrs
me_me_na
I WANA CRY :"(

Only prfessional agencies (and law enforcement agencies) can dig deep into the phones file system and look at whats been deleted. The process usually damages the phone beyond repair.
This service is not available to the public without paying a very large sum of money.
There is no way that you can recover your deleted text messages.

When I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I want help about to connect 7.1 inspire T7900 to the DVD

Similar Messages

Maybe you are looking for