I want Labview DSP hardware for program download
I want to know that wether the target specified for the Labview DSP module can be used in some other board by taking out chip from the hardware download board. Also I want to know how i can download the program created in Labview DSP module to the target chip. Is some hardware and cable available for this.
Hi Ankit,
Please refer to the following KB to see which targets are supported by LabVIEW DSP.
http://digital.ni.com/public.nsf/websearch/AF9886D62684C05D86257101007F4647?OpenDocument
A USB cable is used to connect to those boards so that the user can download the code to the embedded target. Currently, the LabVIEW DSP Module does not support custom DSP hardware even if the hardware has similar or identical peripherals to the supported targets.
Hope that helps!
Kalin T.
National Instruments
Similar Messages
-
Acrobat Pro 9 Download on New Laptop Won't Accept Serial No. for Program Downloaded in 2011
Any suggestions other than walking the problem over a live chat?
Did you deactivate previous versions? It may be you are out of activations.
Was the version and upgrade? If so, it may be asking for the previous S/N, not the current one.
If you are trying to install on Win 8.1 or Yosemite, that may be the issue. I am not sure of the compatibility. -
Dears,
I need the DSP Module For LabVIEW 2011, is it Available? and where can I Download it ?
Thanks
Ahmed AbdulbakyHi Ahmed,
I posted this in error. I did not see that Ryan had already answered this.
Ryan is correct. The latest version is 8.6
You can download the latest version of the DSP module from ni.com/downloads. The exact URL is shown below:
http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/ssnavdl/q/dsp/#
I hope this information helps.
Regards,
James D.
Applications Engineer
National Instruments -
Hardware for LabVIEW Realtime (ETS)
Hello NG,
right now we are using two NI-Devices (PCI 5122 and PCI 6251) in an
Intel based PC with Windows XP as the operating system.
We would like to switch to a Realtime-System (ETS) using our PCI-devices
again in an Intel based PC. As I read (and as we also had to realise)the
hardware requirements are quite strict and it is very hard to figure out
if some hardware will work in advance.
So, does anyone have experience with setting up a realtime system (ETS)
on a standard PC? Moreover, can anybody give some advice which hardware
(manufacturer and product-id) will work?
Thanks in advance
OliverActually I read all of those documents. First we tried to set up a
realtime system using RTX (realtime extension for windows), trying to
get our hardware to work in a realtime environment on top of windows.
It was really hard to get at least something to work, where something
means running labview without hardware on one of the several PCs we
tested. But we didn't get access to any of our NI-devices, where at
least the 6251 should have worked referring to the specs.
So, after calling the NI support they suggested using ETS on a separate
machine instead of using RTX. We then downloaded the programm to check
several PC for ETS capability. But all we tried got stuck somewhere in
the testing procedure (they are probably too new and maybe ETS is not a
friend of AMD )
So now, we are going to buy a PC for ETS, but after what we experienced
with RTX and also with ETS so far, we feel that it could be hard to get
the right PC or PC components. Because of this I'm looking for advice
regarding hardware (manufacturer, partnumber etc.). -
About Labview tool kit for Ti's DSP (RTDX buffer size)
Now I am using Labview tool kit for Ti's DSP to
do the RTDX communication between Labview and Ti's 6713DSK. Now I am
encounting a problem that the my Human interface (Labview) works fine in
the first 10 minutes. However after that data looks freeze. The RTDX
become very slow. It's hard to input data or receive data to DSP through
Labview. I am sending 1 Integer 16 bit data and 1 floating data to DSP
using RTDCXwrite vi and the frequency is 33.3Hz. And at the same time I am
transfer 5 integer 16 bit data from DSP to Labview. The frequency is 25Hz.
What's wrong with this? Is that because the buffer for RTDX has been used
up? And how to set up the RTDX buffer in Labview? because I check the vi
about RTDX and can't find a definition about the buffer. This is very
important in my project. Please tell me how to set up the buffer size and
the RTDX work state (continuous mode or discontinuous). Thank you very
much and I am looking forward to hearing from you.Now I am using winxp, 512Mb RAM, LV version is 7.1. My labview coding and DSP code main function is attached below. Please help me out. I want to transfer 8 16bit integer data. Is it better that I used an array to group these data then transfer this array using only one channel. Compared with using 8 independent channels to transfer them.
Attachments:
HMI_pannel.zip 85 KB -
To Apple
I'm buy MACBOOK PRO 13" on 20 JULY 2012 @ apple store fifth avenue
Part Number MD101LL/A
Serial number C0******DTY3
They say can download update free for program OS X Mountain Lion when arrived
But when i download why it charge to me...
I want my money back if not i want to return MACBOOK PRO 13" and will buy New One
Best regard
<Edited by Host>If you registered your computer after June 11th, you were entitled to a free upgrade to Mountain Lion. See http://www.apple.com/osx/uptodate/.
If you went ahead an purchased ML before recieving your redemption code then you're just out $20. Not a big deal - you should have been instructed on how to get a redemption code for the OS X update.
Clinton -
Using Scope for LabVIEW DSP Module
I have a DSK6416 board and it is supported in my LabVIEW DSP Module on my LabVIEW 8.6 Professional. I want to use two scopes, one for the input audio signal and one for the output audio signal of my board. Which one should I use? NI-SCOPE or Two Channel Oscilloscope? Does NI-SCOPE support any dsk? Does two Channel Oscilloscope work with my real-time project?
Duplicate Post.
-
for some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?
Open the Mac App Store on the other Mac and in the Quick Links sign into your account. See if the Mountain Lion purchase is among hidden apps in the iCloud area of your account info.
-
Hi ,i bought a MacBookPro which came with Lion installed on it (i have registered my mac book pro right after i bought it), i also wanted to have a copy of the installation disc in case of a crash, so i used mac app store to get it.Normally if an app is already bought (for iphone app store) there is a warning or a sign that informs the buyer, than the app store lets the buyer to re-download/re-install the app.I've charged for this download afterwards, because i was using virtual credit card, there was not enough money transferred to that card during that download but the app store let me download it anyway. I haven't charged before the download, the app store first let me to download it then it requested that amount of money for next download wich it was a free app. Can anybody enlight me? thanks
Hi ...
i also wanted to have a copy of the installation disc in case of a crash
If you have problems with your Mac you use Lion Recovery
However, you can create your own installation disc > How to create an OS X Lion installation disc | MacFixIt - CNET Reviews
Since Lion came pre installed on your Mac, the App Store doesn't not recognize that as a purchase so you if you want to re download Lion to create a boot disk you will have to pay for it. You can then re download Lion on all your authorized Macs for free. -
I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?
"Gift Card" is sometimes called a tacky gift, but if it allows the other person to get whatever they want it works.
Besides, anything purchased through App Store is usually "All Sales Final", so I think iTunes card is a good idea. -
Want to try trial for Premiere Pro but for some reason the apps tab says "download error please contact customer support"
Kbubello for information on how to resolve download errors please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.
-
I want to compile java for *.exe program?
I want to compile java for *.exe program?
ThanksI want to compile java for *.exe program?
ThanksYou're welcome, but the correct answer was allready
given in previous response.oops, late again, must edit.
You're welcome, but the correct answer was allready given in the first response. -
i have had itunes for years when i try to open it, it says i have missing files so i repaired it, then it said the same thing. so i went to download it again to fix the problem and it wants me to pay for a membership. is itunes no longer free?
iTunes is free... there is no membership fee.
Try providing some specifics about what is going on and others might be able to provide a resolution. -
I can't fine the "check for available downloads" button anywhere and I want to download an album I preordered
It should be under the Store menu on your computer's iTunes :
If you are using your phone then does it show in the Purchased tab in the iTunes store app on it for downloading ? -
I have just received a billing for a download that I do not want. How do I return it?
According to Apple, all sales are final.
http://support.apple.com/kb/HT3641
You indicated the app was free so you could not have been charged for it.
Maybe you are looking for
-
Hello. I have a total of 11 buttons each named b1, b2, b3 etc. I used to have it so when the a button is clicked, the button was recognized as to which one it was through an array and string and switch statement (I will show you below). But now I hav
-
Please HELP!!!!!!!!!!!!!
-
Escalate Button in Service Ticket
Hi All, Can anyone please let me know the how does the escalate button of service ticket works in IC webclient. What customizings are required? I have created rules and actions in the rule modeler using context Order.Released the rules.But still on c
-
Unable to upload file more than 1 MB
Hi, I am using the iPlanet web server for my web application. I am not able to upload a file of size greater than 1MB. Are there any settings on the iplanet server made that limit the file size for the uploading? Regards, Manasi
-
How can I add a text substitution for changing st in 1st to superscript?
I would like to add text substitutions for 1st, 2nd, 3rd, etc. so the letters show up as superscript. I attempted to change the st, nd & rd to superscript in Pages and tried to paste it, but it simply changed it back to regular format. How can I go a