I want link between draw and qmel or qmsm tables

Hi all,
I want link betwwn draw and qmsm or qmel tables means for particular notification number (notification type is repair means ZC) i want document number and document type. how i get this information from draw table .

Hi Himmam,
a good way is to run tx ST05 and activate a trace. Then go to the standard transaction, check the documents and come back to tx ST05 to deactivate and display the trace.
You will obtain all the tables and perhaps the relationship between them.
Regards,
Carlos.

Similar Messages

Link Between Draw and viob01 or viob02...

Hello guys can you help me with my problem im trying to find the link between draw and viob01 or viob02..
Thanks guys!
JP

Hi Barro,
Its very late to answer you but still your problem is not resolved, you can follow the below steps to get the relations between those tables.
1. Use SQVI transaction,
2. Create a View
3. Enter title,
4. Choose the Data source as Table Join
5. Now use Insert table option.
6.And insert the tables which you want. It will propose the relation between them.
Thanks
NItesh

Link Between PSA and Data Targets

Hi Experts,
Could you please help me is there any table which will have PSA & data target (Cube or ODS) details.
I know the table which will have data target manage screen details and other table wil give the details like data loaded into till PSA.
But i want to know any SAP table will have link between PSA & data target.
I want to know if the request is loaded till PSA or it is loaded into data target.
Any table will give details like PSA request no, if target is there then some kind of flag like....
Please let me know if any one know the table which will have PSA as well as Data target details.
Thaks in Advance
Shaik

Hi,
I clearly mentioned im aware of Manage screen details table, i want link between PSA and Data target table which will return if requst loaded till PSA or PSA & target.
Im using BI 7.0 .
Regards
Shaik

'Is there a link between OLM and iProcurement'

I have been asked 'Is there a link between OLM and iProcurement'? The person posing the question is wanting to create trainers as suppliers and I know that the supplier information is shared between OLM and the A/P, A/R and G/L modules and I presume that the link to iProcurement will be via one of these modules however is there a more direct vanilla link between OLM and iprocurement?
Any help would be great
Thanks
DM

I am afraid there is no link between the iProc and OLM.
The closest that apps can offer you is that your learner/delegates can be of type external i.e. being an Organization or a Customer. Hence there exists a link for your delegate to be a customer(hz_parties).
However this might be a future integration i.e. Trainers being suppliers. I am saying so because in 11.5.10 there is a table named OTA_VENDOR_SUPPLIES that has reference to vendor_id. Currently this table is not being used by OLM.
You may look into the code of packages OTA_VSP_API, OTA_TEA_BUS & OTA_PLE_BUS and see if Oracle's future functionality will converge towards your business requirement.
Thanks,
Anil Passi
http://oracle.anilpassi.com

Link between Project and Sales Order

Apart from sales order can we have a link between project and customer master ??
I know that WBS element assignment can be made in sales order but i want to have link between
customer master and project. I don't want any user field or text field in sales order.
Any idea ?
Regards
Ashish

Yes Mr Ashish!
As far as iam concern there is no link between Project & Customer Master, you have to link it with SALES order, I had check in XD03,XD01, the complete customer master, i didnt find any field in customer master which links with Project.
I'll let you know if i find any links.
Regards,
ANSAR

Link between Item and delivery

Hi ,
I want to know the link between item and deliveyr. Like for example, an sales order item ( no. 10) containing 10 quantities can be delviered 5 times( each containing 2 quantities) and line item ( no. 20) can contain one single delivery. I am working on a report where i have to link all the line item to its delivery number. I am trying to achieve this through GENIl but i am not able to indetify as to how to differentiate the different deliveyr numbers. In other words, can some one help me as to how to link the delivery number to its corresponding items?

Document flow is stored in the table VBFA in ECC.
VBELV fied is the sales order number and in POSNV specify the line item number and speicfy VBTYP_N = J (Delivery).
Regards,
Bhanu

Link between GTM and FSCM (sales or purchase order hedging)

Hi all,
I am trying for a few days to have SAP GTM working (I am in an IDES ECC6 system, and as far as I know in EhP4 version). The main goal in fact is to test the currency hedging, and therefore to the link GTM and FSCM, either single-sided purchase or sales order, or two-sided . The flow I want is the following :
-     I buy or sell a product, in GTM, through a trading contract which generates a purchase or sales order.
-     Automatically a currency hedge is generated to cover the risk, in FSCM, I guess in exposure management.
-     And then the financial products (derivatives) are generated as well.
No problem to create the trading contract, no problem to generate the sales or purchase order. But in spite of the (very little) customizing I found in u201CSAP GTM => currency hedgesu201D, and some in FSCM, in u201Ctreasury and risk managementu201D, no way to have this link between GTM and FSCM, no additional document is generated like a Forward Exchange Transaction (I guess I should have this, and then a risk exposure in FSCM).
Would you have an idea ? Is this customizing, or an additional Business Functions or Extension Set not activated ? SAP says : u201Cit worksu201D, but canu2019t find the way.
Thank you very much for your help, I am quite looking for this link for a few days now u2026
Best regards
Patrick

Yes Mr Ashish!
As far as iam concern there is no link between Project & Customer Master, you have to link it with SALES order, I had check in XD03,XD01, the complete customer master, i didnt find any field in customer master which links with Project.
I'll let you know if i find any links.
Regards,
ANSAR

What is the link between PO and Requisition in database side

hello friends,
please can any one tell me that what is the link between PO and Requisition in database side. means after creating the requisition we will go for create the PO based on that requisition.
want to know that what is the link between both in database side.
Thanks in advance
krish.

Hi,
The link is at distribution level, between:
PO_DISTRIBUTIONS_ALL.REQ_DISTRIBUTION_ID
and
PO_REQ_DISTRIBUTIONS_ALL.DISTRIBUTION_ID
Hope it helps.

Link between PR and RFQ

Hi all,
I looking for a table where I got a link between e PR and the RFQ which refeer to that PR. We can see in ME53N in the Status tab the RFQ number. I want to fine a table where is that link between PR and RFQ.
We can see the link in EKPO with the PO number only if a PO is done from the RFQ (field BANFN).
If I look in EKPO with the RFQ number, the field BANFN (PR number) is empty.
I don't find a table with a link between the PR and the RFQ if the PO is not done (nothing interesting in EBAN)
May someone help me ?
Thanks all
Regards
Mathieu PAINEAU

Hi all,
I found by myself ! This link is done in the Table EKET.
Regards
Mathieu PAINEAU

Linking between PP and SD tables

Hai friends,
I want one link between PP and SD tables. My requirement is i have planned order PLAF table. i want to link Sales table. Please guide me.
Thanks and Regards
visvanath

Hi
You can simply link the Sales order No and ITEM
VBAP-VBELN and VBAP-POSNR with the PP order item table
AFPO-KDAUF and AFPO-KDPOS and get the Pp related info
or in Sales tables there is a field called AUFNR in VBAP
use that for PP order number
SD tables
http://www.erpgenie.com/abap/tables_sd.htm
PP tables
http://www.erpgenie.com/abap/tables_pp.htm
Regards
Kiran Sure

Install from scratch 3 times Mavericks but cannot used my restore it will just start for ever. After first install and restore mail and link between folder and files didn't work anymore. Now cant see my disk in finder. Help?

First install through regular update : never finishing the start after automatic restart
First install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only - Mail crashed each 5 inutes and asked constantly for password of my 2 accounts, links between folders and files not OK and attaching a doc was complicated. I downloaded the update same problems
Second install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only and settings : never finishing the start after automatic restart
Third install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - But no disk available in Finder
So far no Mac since 3 days ...
Any help is welcome

Still struggling to understand why copying the entire root dir to a disk image and then restoring from that image did not, as expected, yield an identical system, and why I even had to reinstall after doing this.
Because there is a lot more going on under the hood than merely copying files.
The only way to do what you want is to use cloning software like Carbon Copy Cloner.
My advice is to rescue your personal files to a regular non-TimeMachine external drive, Zero erase the ENTIRE drive and install OS X fresh and update, then your programs from original sources and files from backup.
Then, make a bootable clone and you can copy that as many times as you want and each one is bootable.
Most commonly used backup methods
How to erase and install Snow Leopard 10.6

Link between iTunes and Library lost. Hard drive failure

Hi!
   I need help with the following problem. (i7 27" iMac/256GB SSD + 1TB of internal disk hard drive. (SATA/7200rpm/3.5"))
          The 1TB internal hard drive on my iMac failed the S.M.A.R.T. Utilities test so Apple called in the computer and I had to have the hard drive replaced. The technicians reloaded the system from a 1TB external Western Digital hard drive; I had backed up the everything on it using Time Machine.
          Unfortunately, the iTunes application cannot now locate my iTunes library. I create a lot of slideshows on Aperture and use music from iTunes on the audio tracks. The titles on the audio tracks are now inaudible and are preceded by a yellow triangle with an exclamation mark inside. Can anyone help me on how I should re-establish the original link between iTunes and its library. The music files are located in folders (name of artists), within a folder (iTunes Music), within a folder (iTunes), within a folder (Music), within a folder (declangreaney) on the 1TB of internal disk drive.
          In trying to solve the problem, I went through the folders and double clicked on one song. This opened iTunes so I highlighted and dragged all the other 'artist-named' folders on the iTunes interface and in doing so, I succeeded in accessing all the files. This is not wholly satisfactory, however, as I do not have my own playlists and more seriously, there is still no link between the Aperture audio tracks.
Sincerely,
     DG.

    Hi again!
     I saved the last message by accident which caused the reply to be sent off and so I had not finished what I wanted to write. Aploogies.
     I didn't find the new iMac hybrid SSD/Disk system easy to understand when it arrived over a year ago. I eventually decided that the 256 SSD section would be best suited to having the Operatin System for greater speed and I must have decided to put the music files on the 1TB internal hard drive along with photos and raw video clips. I can't honestly remember. There was a lot to take in. I wasn't even aware until this failure that iTunes had a default location.
     In addition to having the iTunes folder on the internal 1TB hard drive, I used Time Machine to store the entire computer contents on a 1TB Western Digital external hard drive. I had done my last Time Machine back-up on the 13 February and so I was hoping that by opening one or two songs on the back-up, they might reactivate the 'old' interface with the original playlists on it. That didn't happen but I then realised, while I was still in the Tme Machine back-ups on the WD external hard drive, that in the iTunes Media folder contained within the iTunes folder on the default Users/Username/Music location there was only an Add automatically to iTunes folder which was empty. While still still looking through the Time Machine back-upsI saw that the music instead was stored on the 1TB of internal hard drive as outlined on the first post:
     'The music files are located in folders (name of artists), within a folder (iTunes Music), within a folder (iTunes), within a folder (Music), within a folder (username) on the 1TB of internal disk drive.'
   The iTunes.itl file was last modified on Monday at 21:52. Created on 17th February, 2012. Size 386KB
     Regards,
     DG.

Table Link between Equipment and Sub-equipment

Hi all
My requirement is this
I have one mobile set with a serial number. for that mobile set i have one battery with a serial number, now i want to link both the serial numbers, one as main and another as sub item
I tried by maintaining the battery serial number as sub-equipment in the main mobile set equipment number master,
Let me know the table link between equipment and sub-equipment
I want a report based on the input mobile set equipment number what are all the sub-equipment associated with the main equipment
Also suggest is there any other approach,
Regards
Amuthan M

Hi
EQUZ is the table,if u give the sub equipment in equipment field and execute.you can find the main equipment in superior equipment field

Is there any Link between BNK_MONI and DMEE

Hi ,
I have created EXIT Fucntion Module in DMEE Structure for PAYM Tree Type to udpate value of Reference Text node to show Custom value. Stand alone DMEE works fine for Testng purpose. But It does not work with BNK_MONI .
I am running following sequence of T Codes :
RVND --> F8REL --> F111 --> BNK_APP --> BNK_MONI ..
I want to update one of the fields in output file generated by BNK_MONI .
Is there any link between BNK_MODI and DMEE ?
Or shall I have to Debug background job created by F111 like it is done in case of F110 ?
Please suggest..
Edited by: Yogesh Gupte on Jan 27, 2012 6:59 PM

Hi,
Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
In Addition to above information,
In VOV4,
DL+ NORM + + -DLN
In VOV5,
For Itemcatagory DLN+ --CN
From this schedule line category CN,movement type 601 is taken during without reference to order delivery creation.
MCM

How to create database link between oracle and SQL Server

Hello Everyone,
Here i have Oracle Database 9i and SQL Server 2005 databases.
I have some tables in sql server db and i want to access from Oracle.
How to create a database link between these two servers
Thanks,

Thanks for Everyone,
I was struggle with this almost 10 days....
I created Database link from Oracle to SQL Server
Now it is fine.........
Here i am giving my servers configuration and proceedure how i created the db link...@
Using Generic Connectivity (HSODBC) we can create db link between Oracle and SQL server.
Machine (1)
DB Version : Oracle 9.2.0.7.0
Operating System : HP-UX Itanuim 64 11.23
IP : 192.168.0.31
Host : abcdbt
Machine (2)
Version : SQL Server 2005
Operating System : Windows server 2003 x86
IP : 192.168.0.175
Host : SQLDEV1
User/PW : sa/abc@123! (Connect to database)
Database : SQLTEST (exsisting)
Table : T (“ T “ is the table existing in SQLTEST database with 10 rows)
Prerequisites in Machine (2):
a)     Oracle 10g software
b)     User account to access SQL Server database (sa/abc@123!)
c)     Existing SQL Server Database (SQLTEST)
d) Tables (testing purpose) (T)
Steps:
1)     Install Oracle 10.2.0.1 (Only SW,No need of database) *(Machine 2)*
2)     Create a DSN where your windows Oracle 10g SW resides *(Machine 2)*
Control panel >> Administrative Tools >> Data Source (ODBC) >> System DSN ADD
You can follow this link also.....
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
I created DSN as
DSN name : SQLTEST
User : SA/abc@123! (Existing user account)
Host : 192.168.0.175 (machine 2)
Already I have 1 database in SQL Server with the name SQLTEST
You can create DSN with different name also (not same as db name also)
3)     Create a hsodbc init file in $ORACLE_HOME\hs\admin *(Machine 2)*
Create init<DSN NAME> file
Ex: initSQLTEST
Copy inithsodbc to initSQLTEST
And edit
initSQLTEST file
HS_FDS_CONNECT_INFO = SQLTEST    <DSN NAME>*
HS_FDS_TRACE_LEVEL = OFF*
save the file....@
4)     Configure Listener.ora *(Machine 2)*
LISTENER_NEW =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
SID_LIST_LISTENER_NEW =
(SID_LIST =
(SID_DESC =
(SID_NAME = SQLTEST) *+< Here SQLTEST is DSN NAME >+*
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = hsodbc))
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = extproc) )
:> lsnrctl start LISTENER_NEW
5)     Configure tnsname.ora *(Machine 2)*
SQLTEST11 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = SQLTEST))
(HS=OK)
:> tnsping SQLTEST11
If No errors then conti….
6)     Configure a file *(Machine 1)*
Cd $TNS_ADMIN ($ORACLE_HOME/network/admin)
Create a file
$ vi TEST_abcdbt_ifile.ora
something=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST =192.168.0.175) (PORT=1525))
(CONNECT_DATA=
(SID=SQLTEST))
(HS=OK)
$ tnsping something
$ sqlplus system/manager
Your connected to Oracle database *(machine 1)*
create database link xyz connect to “sa” identified by “abc@123!” using ‘SOMETHING’;
select * from t@xyz;10 rows selected.
Thanks,
Edited by: ram5424 on Feb 10, 2010 7:24 PM

I want link between draw and qmel or qmsm tables

Similar Messages

Maybe you are looking for