I want messages with attachments to not be sorted and I want to see the attachment icon
Thanks for sending me the information on showing the attachment icon. I did what you suggested, and it did not work. And now, if I get an email with an attachment, I don't see the email--it is buried somewhere in my inbox. I used to be able to get messages with attachments and they would come in chronological order, and there would be an attachment icon. Can you please help?
Click on the header label DATE to sort by date. Click DATE a 2nd time to reverse the sort order.
This works on any header. The one to click on is where it is going to sort.
Do you have the attachment column showing? See image.
If not click the circled icon and add it.
Similar Messages
-
My daughters ipod touch will not turn off and is frozen on the Apple icon screen. Tried to update software, didn't work. Tried to restore, didn't work. Does anybody know what else to try?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Exchange 2007 server will not send intra-organisation messages with attachments
Hi we have a problem with the Intra-Organisation connector between out Dubai and London office.
If they send us a plain message it is delivered OK, however if there is any attachment most of the time the message sits in the queue and continually retries. On some occasions messages do get delivered.
The errors vary between Connection Timed Out, Connection Dropped and 10061, No connection could be made because the target machine actively refused it.
As Dubai have a dynamic IP address they route all of their external mail via London and that is all going through OK. All of the other sites can send and receive OK with attachments both internally and externally.
To me this looks like I have a problem with the Intra-Organisation SMTP Send Connector on the Dubai server but I cannot spot anything that might be causing this issue.
They have worked previously however another issue did involve removing the Dubai server from the domain and adding it back in. Since then we have had this problem.
I have checked message size limits on the Send connector (100Mb) and the Transport settings (100Mb). I have checked the message size limits on the Intra-Organisation SMTP Send Connector (unlimited) and even on the user's mailbox (unlimited).
Any idea where I should be looking next?
Many thanks, EddieHi Ed,
I think you may have hit on the problem - this is all one org so having read up more on this it should not be using this.
I spotted that the server was using this connector when I was looking the message tracking for the server and started looking into what it does and how to control it.
I used the Set-TransportServer command to set protocol logging on this to verbose, it get entries in the SMTP send logs like this:
2014-09-18T14:51:52.154Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,0,,192.168.4.5:25,*,,attempting to connect
2014-09-18T14:51:52.300Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,1,192.168.5.1:52766,192.168.4.5:25,+,,
2014-09-18T14:51:52.423Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,2,192.168.5.1:52766,192.168.4.5:25,<,"220 <remote server FQDN> Microsoft ESMTP MAIL Service ready at Thu, 18 Sep 2014 15:51:51 +0100",
2014-09-18T14:51:52.443Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,3,192.168.5.1:52766,192.168.4.5:25,>,EHLO <local server FQDN>,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,4,192.168.5.1:52766,192.168.4.5:25,<,250-<remote server FQDN> Hello [192.168.5.1],
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,5,192.168.5.1:52766,192.168.4.5:25,<,250-SIZE,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,6,192.168.5.1:52766,192.168.4.5:25,<,250-PIPELINING,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,7,192.168.5.1:52766,192.168.4.5:25,<,250-DSN,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,8,192.168.5.1:52766,192.168.4.5:25,<,250-ENHANCEDSTATUSCODES,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,9,192.168.5.1:52766,192.168.4.5:25,<,250-STARTTLS,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,10,192.168.5.1:52766,192.168.4.5:25,<,250-X-ANONYMOUSTLS,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,11,192.168.5.1:52766,192.168.4.5:25,<,250-AUTH NTLM,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,12,192.168.5.1:52766,192.168.4.5:25,<,250-X-EXPS GSSAPI NTLM,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,13,192.168.5.1:52766,192.168.4.5:25,<,250-8BITMIME,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,14,192.168.5.1:52766,192.168.4.5:25,<,250-BINARYMIME,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,15,192.168.5.1:52766,192.168.4.5:25,<,250-CHUNKING,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,16,192.168.5.1:52766,192.168.4.5:25,<,250-XEXCH50,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,17,192.168.5.1:52766,192.168.4.5:25,<,250 XRDST,
2014-09-18T14:51:52.591Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,18,192.168.5.1:52766,192.168.4.5:25,>,X-ANONYMOUSTLS,
2014-09-18T14:51:52.723Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,19,192.168.5.1:52766,192.168.4.5:25,<,220 2.0.0 SMTP server ready,
2014-09-18T14:51:53.072Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,20,192.168.5.1:52766,192.168.4.5:25,*,,Received certificate
2014-09-18T14:51:53.072Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,21,192.168.5.1:52766,192.168.4.5:25,*,FC006F5961FE665AD4FC1C0123FCEB6C0A477A49,Certificate thumbprint
2014-09-18T14:51:53.074Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,22,192.168.5.1:52766,192.168.4.5:25,>,EHLO <local server FQDN>,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,23,192.168.5.1:52766,192.168.4.5:25,<,250-<remote server FQDN> Hello [192.168.5.1],
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,24,192.168.5.1:52766,192.168.4.5:25,<,250-SIZE,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,25,192.168.5.1:52766,192.168.4.5:25,<,250-PIPELINING,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,26,192.168.5.1:52766,192.168.4.5:25,<,250-DSN,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,27,192.168.5.1:52766,192.168.4.5:25,<,250-ENHANCEDSTATUSCODES,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,28,192.168.5.1:52766,192.168.4.5:25,<,250-AUTH NTLM,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,29,192.168.5.1:52766,192.168.4.5:25,<,250-X-EXPS EXCHANGEAUTH GSSAPI NTLM,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,30,192.168.5.1:52766,192.168.4.5:25,<,250-X-EXCHANGEAUTH SHA256,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,31,192.168.5.1:52766,192.168.4.5:25,<,250-8BITMIME,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,32,192.168.5.1:52766,192.168.4.5:25,<,250-BINARYMIME,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,33,192.168.5.1:52766,192.168.4.5:25,<,250-CHUNKING,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,34,192.168.5.1:52766,192.168.4.5:25,<,250-XEXCH50,
2014-09-18T14:51:53.210Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,35,192.168.5.1:52766,192.168.4.5:25,<,250 XRDST,
2014-09-18T14:51:53.225Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,36,192.168.5.1:52766,192.168.4.5:25,>,X-EXPS EXCHANGEAUTH SHA256 ,
2014-09-18T14:51:53.225Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,37,192.168.5.1:52766,192.168.4.5:25,>,<Binary Data>,
2014-09-18T14:51:54.132Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,38,192.168.5.1:52766,192.168.4.5:25,<,235 <authentication information>,
2014-09-18T14:51:54.143Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,39,192.168.5.1:52766,192.168.4.5:25,*,SMTPSendEXCH50 SendRoutingHeaders SendForestHeaders SendOrganizationHeaders,Set Session Permissions
2014-09-18T14:51:54.163Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,40,192.168.5.1:52766,192.168.4.5:25,*,3757,sending message
2014-09-18T14:51:54.164Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,41,192.168.5.1:52766,192.168.4.5:25,>,MAIL FROM:<[email protected]> SIZE=98854 BODY=BINARYMIME,
2014-09-18T14:51:54.169Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,42,192.168.5.1:52766,192.168.4.5:25,>,RCPT TO:<[email protected]>,
2014-09-18T14:51:54.298Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,43,192.168.5.1:52766,192.168.4.5:25,<,250 2.1.0 Sender OK,
2014-09-18T14:51:54.300Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,44,192.168.5.1:52766,192.168.4.5:25,<,250 2.1.5 Recipient OK,
2014-09-18T14:51:54.316Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,45,192.168.5.1:52766,192.168.4.5:25,>,BDAT 98856 LAST,
2014-09-18T15:05:12.690Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,46,192.168.5.1:52766,192.168.4.5:25,<,250 2.6.0 <23B7E7C020C8304085B1502492A968D13F75EA450D@localserver>
Queued mail for delivery,
So it does appear for some reason that the local mail server thinks it needs to use the wrong connector even though both servers that are in the same domain. It is odd that it only seems to affect messages with attachments.
Can you give me any suggestions to try and find the root cause of this problem?
Many thanks, Eddie -
I use iMacs for work. I often send email messages with attachments using Mail. Often, when sending email messages to Windows users (they are out there still), they will reply that they cannot open "the second attachment." The message seems to "pick up" a second apparent attachment, which is generally just a few K in size, and is not part of the original message or attachment. Unfortunately, though, it tricks the recipient into thinking that there are two attachments and the second one is meaningful So then they respond and I have to assure them that the second attachment is irrelevant and can be ignored.
Any thoughts on how to fix this, so outgoing email messages will only present the intended attachment?That's a great question. I do use a signature, but inasmuch as it is simply text pre-inserted in the email message, I would be surprised if the signature somehow became stripped out and converted to an attachment. Nonetheless, I will try deleting the signature to see if that makes any difference.
-
Mail crashes on opening any message with attachments
mail crashes on opening any message with attachments
this started happening about a month ago. I thought the problem was that there was too much mail in the program -
so, I acquired a program called MAILSTEWARD (which I recommend!) and it stores & saves my old mail.
I reset MAIL, so it kept my address and smart folder instructions etc, but all the mail itself was gone (I forget how I did that - I probably will try it again...)
for a few weeks, everything was fine - I could open an eMail with an attachment, and it worked.
but now it started crashing again everytime there's an attachment!
don't know what to do - there's only a month's worth of mail in there (which I should clean out anyhow) - but it seems to me that's not too much...
thanks!
wthat's it - I ran the updater - and I believe I have been able to use it all day without the program crashing when it encounters an attachment.
one goofy thing I noticed, for the first time, there appear to be two applications folders on my start-up drive (1) in my user folder (2) in the "main" hard drive folder.
MAIL is in both - I believe the "main" one was updated; when I turned on the "user" MAIL it crashed when I opened an eMail with an attachment; when I opened the same eMail with the "main" mail there was no problem.
now what does this tell us?
thanks again!
will -
I have an iMac OS 10.9.5 - Every time I turn on my system I get the message that it can not access icloud and to fix it using iCloud preferences. I do not want to access or use iCloud, how do I get the message to discontinue?
Hello mrmacjohn,
Verifying that any iCloud account that may be signed in is signed out should resolve this error.
On your Mac, open iCloud preferences, then click Sign Out.
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Cheers,
Allen -
My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct. I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
How to send a SOAP message with attachments
How to send a SOAP message with attachments thru webservice using axis-1_3 can any one sujjest.............................
Please refer
http://www.javaworld.com/javaworld/jw-09-2003/jw-0912-webservices.html
http://xml.sys-con.com/read/40315.htm -
Mail; emails with attachments are not shown in Sent folder
Since upgrading to Yosemite I have had lots of problems with Mail.
One is that it seems that some emails with attachments do not show in the Sent folder! Some of them can be found further down, On my Mac in a folder called Recreated letters, or something like that in English.
Anyone have the same problem?
NinaWhat is your version of TB? Have you changed anything since the last time it worked? Mail servers changes done by your provider are also possible.
* Does it occur when an e-mail is sent immediately (before a possible auto-save, see below)?
* Can you copy any mail from any folder to the Sent folder?
I've heard of the error "saving to Sent" with older versions of TB, but not related to attachments.
So, for the general saving to Sent error, some people report that this
https://kb.wisc.edu/wiscmail/page.php?id=3679
has helped them.
I've also heard that turning off "Auto save every .. minutes" in TB preferences > Composition > General has helped some in older versions and IMAP.
You may check this page: <br>http://kb.mozillazine.org/IMAP:_advanced_account_configuration
PS: You seem to use Firefox 16, an extremely outdated and insecure browser version. Same for Thunderbird? To be on the safe side (bugs, security), IMHO you should really upgrade regularly to the latest versions, of course backing up your profiles first, especially with TB ( http://kb.mozillazine.org/Profile_backup ). -
Does Workshop deal with SOAP Messages with Attachments
I try to send back an image from my web service. Is there a way to make a SOAP Messages
with Attachments using BEA Workshop?
Thanks,
Jerome.Hi Jerome,
I'm pretty sure that Workshop doesn't support SwA (SOAP with Attachments) yet. The
product manager says that it is being considered for a future version, though :-)
In the meantime, I don't see any reason why you can't just use a Java class that
uses the JavaMail API to construct a Multipart MIME message. The MimeMultipart class
(the one that acts as a container for a multipart/related document) has a writeTo()
method that you can use to populate a ByteArrayOutputStream. Afterwards, you should
be able to use the toByteArray() method on this ByteArrayOutputStream, to create
the byte[] that maps to a xsd:base64Binary data type. The nice thing about this,
is that the target web service has complete access to the SOAP message (in the first
Body part), and all the attachments :-)
Just a thought...
Mike Wooten
"Jerome Sonnet" <[email protected]> wrote:
>
I try to send back an image from my web service. Is there a way to make
a SOAP Messages
with Attachments using BEA Workshop?
Thanks,
Jerome. -
The attachment is still there. But the attachment column is blank when viewing the list of e-mails. Is there anything I can do to get Mail to display the attachment icon in the listing?
I originally imported the Entourage 2004 emails by grabbing each Entourage folder, dragging it to a folder on my old PowerBook G4, dragging that folder to my external drive, and having Mail import the mailboxes from the external drive to Mail 6.3 ( OSX 10.8.3) on my new Mac Mini. any ideas? Thank you.Hello Ramki
DECISION_NOTE is a new element created in the standard decision task as of new releases (Note 1643764)
Once the user fills in the comments, they are saved as SOFM Objectsin DECISION_NOTE (this too is multiline element). All we have to do is bind it back to the workflow container in _ATTACH_OBJECTS.
Hi Ronen
Thanks for the suggestion.....I was thinking on the same lines too....if at all we have to change the approach, I need to keep it least disruptive .
Hi Rick
Will test the FM SO_NEW_DOCUMENT_ATT_SEND_API1 ...let me check if I can redefine SENDTASKDESCRIPTION in a delegated subtype of SELFITEM and use this API ....(if at all I can)....
For the wait step part.... the attachment is added to the mail step via the binding from the workflow...._ATTACH_OBJECTS from Workflow to _ATTACH_OBJECTS of the email task...not sure where you want me to set a wait step. Request you to please elaborate a bit more.
Thank you all for your kind inputs!
Will be back with my today's trials...
Regards,
Modak -
The Apple Mail group my sent and received similar messages in my inbox, how can i disable this? I just want to see the messages i received, not the ones i sent!
Mail/Preferences/Composing. Do you have the CC myself box checked?
-
Exch2013 - OWA Message with Attachments Error
Greetings,
This morning I worked on an issue with an email that has 5 attachments sent to multiple people in my organization. The type of attachments include one .docx file (830 KB) along with four .mp4 files (21MB total). When this email is viewed in OWA for all recipients
besides one, they can view the email and attachments without issue. On one particular mailbox I see the email in the Inbox but when I select it I get "Error: Your request can't be completed right now. Please try again later."
If I forward the same email to this user I get the same error again. If I break the email into two emails, splitting the attachments up, three on one email and two on the other email, it comes through correctly.
My mind goes to some type of send/receive limit on the user but when I check the limits on the user account, and on the database, I have no limits set. Also all users are on the same database so that wouldn't support that idea.
Can someone explain to me what could cause an email to show correctly on all recipients for this email but for one recipient they receive that error?
Thanks,
RobertHi Robert,
Just one user cannot open big size attachment in OWA, it seems an issue on the specific user side.
Please let the specific user change to another computer and Browser for testing.
Thanks
Mavis
Mavis Huang
TechNet Community Support -
I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DW041 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s)
ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist. ------------------------------------------------------------------------------------- System Requirements and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs -
i have a macbook pro and use MS Office 2011. In Outlook 2011, i have noticed a strange phenomenon. In some messages, although the attachment icon appears indicating presence of attachments, i am unable to actually see or access the attachments.
vivebk67,
FYI, I have the same issue. I converted from MS Office 2010 to Mac Office 2011 by importing .pst files several months ago and I have noticed that many emails, which I originally received in MS 2010 but coverted to Mac 2011, show the paperclip as if there is an attachment. But when I open the email, the attachment is not there.
At this point I cannot find any pattern as to why some converted emails retained their attachment and other emails appear to have retained their attachment but the attachment is not visible.
I can confirm that there actually is an attachment by opening up MS Office 2010, but that is a huge pain becasue I have to open Parallels to do that. I have no issues with any attachments received in Mac Office 2011.
I spent an hour opening up a ticket with MS, sent them .pst files with examples and the guy was able to confirm that he could open the attachment in MS, but not Mac. BUT, of course, I was told that I would not be apprised of any ticket updates and that the only way I would know if the issues was fixed was when I was finally able to view attachments that I was not able to view previously.
Running MacBook Pro OS X 10.7.1
Maybe you are looking for
-
WWish I'd checked the forums first, but I upgraded to 8.1.2. A few days ago and have had nothing but issues. FIrst -- it takes twice to three times as long to boot up my device. After the apple logo disappears, the screen is just black for
-
Hi, my MacBook Pro is working very slowly.. what could be causing it and what can I do to fix it??
-
How can I identify these songs in my library and either delete or authorize them?
-
Decimals rounding to quarters possible?
Hello, my bro has a question where he's wondering if it's possible to set Numbers to round to quarters. Example: "I need to round a calculated cell in Numbers to the nearest quarter: e.g. 314.25 or 23.75; but all I can do is to the nearest number of
-
For a sales order a billing document is created after that billing document is reversed but no accounting entry generated From VA02 it shows the following error message - "FI: Postings" not allowed (Sys. status LKD, object VB0030009866000010) Message