I want my appletv to play through my Panasonic DVD home theater system

I can't get sound through the entertainment system

It's hooked up to (haier) but I get the surround system through hdmi 1 with the cable.. The appletv is connected to hdmi2

Similar Messages

My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?

My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?

Get an HDMI switcher. Plug in the ATV directly to the TV and then use the switcher on the other input.
Example
http://www.amazon.com/Ultra-High-Performance-Switcher-Switch/dp/B0015YWKYY/ref=s r_1_1?ie=UTF8&qid=1316918064&sr=8-1

Playing iPod Mini through Home Theater system

Hi all,
I have a Sony Home Theater system. It plays CDs, DVDs, AM/FM, and video from the TV. I bought a Monster cable to hook up my iPod Mini to the player (it has 2 jacks, a red and a blue one that goes to the player), hooked it up per the instructions (put the same color plug in the same color jack on the player), but no sound comes out. The menu options on the player are DVD, Video (which comes from the TV), FM and AM. I don't know how to program the player to make it play from the iPod, and as you can probably tell, I'm a girl and extremely technically challenged. I don't even know where to begin. Can someone offer some guidance, please? Thanks in advance!

There should be an auxiliary input on the Sony.
You need to select this input on the Sony.

HT1349 Playing itune songs on a Sonos Home theater systems

I recently purchased a sonos home theater system.. I cannot play some of my itune songs thru system even after purchasing the itunes match... Is there anything else I should be doing??

Check the owner's manual for your system.

Play through from Panasonic DV camera to iMovie 4.

I have my Panasonic NV-GS11 hooked up to my eMac via Firewire.
I'd like to be able to play through from VHS recorder to record to my hard-drive but it doesn't seem to want to work for me.
I am using an S-Video lead as well, seperate from the audio leads.
I have followed the instructions to the tee in the manual.
The only joy I have had is by clicking the Import button in iMovie and it grabs about a 2 second shot from the VHS tape that is playing.
Any help would be greatly appreciated.
Thank you.
KG.
eMac Mac OS X (10.3.9) iMovie 4.0
eMac Mac OS X (10.3.9)

Turn off FileVault:
http://docs.info.apple.com/article.html?artnum=93460
If that didn't help, try everything here:
http://danslagle.dvmix.com/mac/OSX/panther.shtml
and here:
http://danslagle.dvmix.com/mac/iMovie/iMovie3FixesIssues.shtml
http://danslagle.dvmix.com/mac/iMovie/iMovie4FixesIssues.shtml
http://danslagle.dvmix.com/mac/iMovie/iMovie5FixesIssues.shtml

Is it a solution to use Apple TV and VoiceOver to play my tunes on my home audio system?

hi, i am visually impaired and want to be able to have voice access to browse my music so that i can easily play them on my home system. when i saw that apple tv supports voice over, this idea came to my mind to have an apple tv connected to my home audio system and share my library on my computer to be able to browse it using apple tv with voice over enabled. this way i have access to my music library and via voice. but i couldn't find a good tutorial to approve if my idea is correct or not. please give me feedback to know if my idea is a correct one or essentially it is not a good solution for such problem.
thanks a lot

Yes it should work ok.
I don't use it normally but once enabled Voice Over states the current menu position. If the position has submenus it says 'button'.
For example, I have 2 itunes libraries running currently.
As I scroll across the columns using a right keypress it says something like Main Menu and:
Movies (right keypress) Internet (right keypress) Computers
On pressing select on Computers the submenu opens showing both shared libraries:
AlleyCat Mac Mini
AlleyCat Mac Pro
The Voice Over announces 'Alley Cat Mac Mini, Button, One of Two'
Button seems to indicate a submenu.
Pressing down key on remote it announces 'Alley Cat Mac Pro, Button, Two of Two'
Selecting either library lists the media content categories:
Music / TV Shows / Podcasts etc (order may be different)
It announces say 'Music, Button, 1 of 6'
Pressing select ('button') opens the Music category.
You then have several subcategories inclusing Shuffle/ Search / Music Videos/ Album Artist/ Album / Genre/ Genius etc etc
I'd personally like Artist at the top but it should be easy to navigate down with a few clicks and you'll soon remember which menu number is your preferred category.
One say is Artist, there's Shuffle or similar at the top then all artists listed alphabetically.
So I have maybe:
a-Ha
ABBA
ABC
Academy of Ancient Music
Alanis Morrisette
Alisson Krauss
etc
etc
As you scroll down it says the artist name pretty well for most and says say ABBA, Button, 3 of 227'
Select takes you to the album/track submeny and process procedes.
The Apple remote is very simple and should work well, though i think the older white one is more tactile than the new silver one.
AC

HT2508 Playing movies on home theater system via mac

I have a 2007 mac book. managed to connect the video to tv via the home theater but still stuck on sound. tried using the optical audio cable using the 3.5mm jack adapter but still nothing.

I can't help with your iPod connection, but I can tell you that Samsung's info about the types of files is slightly incorrect.
It cannot play WMA files and does not convert files itself. The most popular files it plays are mp3 and AAC.
Any file conversion must be done in iTunes.
Unless anyone reading this has a Samsung home system, I rather think this is tech question for them if they claim the iPod will work and it does not.
All I can suggest is to check you've converted the files correctly.
See: How to convert a song to a different format using iTunes.

16:9 DVD created in iDVD plays cropped on Panasonic DVD player

I created a DVD from a 16:9 QuickTime movie using iDVD 7. Everything works fine when I play the video on a computer (Mac or PC), but when I play it on my DVD player (a recent Panasonic that plays all commercial 4:3 and 16:9 DVDs perfectly) it plays the video cropped to 4:3. In other words it completely loses the left and right edges.
I have a 16:9 LCD TV so I verified that the settings on the TV were fine and they were. I am certain that the image that the TV receives is already a 4:3 image, it isn't cropped by the TV.
I tried to change the settings on the DVD player manually to see if it was a problem with the player (although I doubted that to start with as I had no problems with commercial DVDs ever). It didn't matter if the DVD player was manually set to 4:3, 16:9 or Auto, all I could get was differently resized versions of the 4:3 cropped video. It appears that for the DVD player, the extra information outside the 4:3 box doesn't exist, it will only play the 4:3 part of the 16:9 video.
Does anybody know why this happens and how to fix it?
Thanks, this is driving me nuts as I've already rendered and rebuilt and re-rendered this project twice and I need to get this DVD to my friend before he moves.
Andrew.

I think I figured it out.
Download myDVDedit from http://www.mydvdedit.com/index.php?pg=downloads
From iDVD save the VIDEO_TS folder (or copy it from your disc/disk image) to your computer.
Open the VIDEO_TS folder in myDVDedit
Use myDVDedit and change all of the VTS files to use an 16:9 auto Letterbox aspect ratio in the IFO section
Save VIDEO_TS from myDVDedit
Load up Toast and burn a new DVD from your VIDEO_TS folder.
I'll test this at home and let you know if it worked on my DVD player.
Cheers, Andrew.

Airport express wont play through all 5 speakers in my system

I currently have an aiprport express an its completely updated and everything but when i try to stream using airplay from my computer it will cut out on 2 of my 5 speakers. Any ideas?

If you are missing a channel when you plug in the headphones, there is either an internal problem with the jack itself, or some other internal issue on the AirPort Express.
Try a factory default reset if you have not tried that before.
Power down the Express at least 15-20 minutes
Hold in the reset button
Continue holding the reset button while you plug the Express back in to power
Keep holding the reset button until you see the amber light being to blink more quickly and then release the reset button
Try the configuration again. If no luck after a few tries, I'm afraid that the evidence points to a defective AirPort Express that will need to be replaced.
If it's out of warranty and you are handy with tools and electronic repairs, it might be worth a try to carefully saw the case open along the center seam on all sides and then look for a loose or broken internal connection. It's a real long shot.

Is there a docking station for iphone5 to play music in home theater system?

How can I connect and play music through my home system from my iphone5

Not sure that that really helps me at all, but thanks for reading the question.

Playing ipod nano through home sound system

I want to play my ipod (nano) through my panasonic dvd player + sound system. Ive tried heaps of leads into every plug socket in the dvd player, but no tunes!
What type of lead do i need?
Where do i plug it into in the player??
Do i just press play to start playing?
Chukka
ipod new nano Windows 2000

Just to expand on what Chris said.
The phono inputs of a stereo amp are designed to accept the inputs of a moving magnet (or sometimes a moving coil) phono cartridge on a turntable. These are low output devices and so the phono input is engineered to amplify the signal.
A line level output such as the iPod doesn't need such amplification and so, if you connect the iPod to the phono input of your stereo you will overload that input. The sound will be distorted and in many instances may cause damage to the speakers. The phono input is for turntables only. Connect the iPod to a line level input as previously mentioned.
The reason you will get a better sound from the iPod when connected to a stereo and using the line out port from the dock (and not the headphone jack on the iPod itself), is that the headhpone socket is powered by a low quality amp. It's meant to drive an easy load like headphones and not the input of a stereo.

Make Flash CS5.5 Movie play through one time

I have created a movie in Flash Professional CS5.5 which has two scenes in it, and I want iot to only play through a single time and then stop....
I opened it originally as a Flash Project, completed the first scene which was an opening screne with a company logo on it, and then a second scene which is product placement images for the department. I have tried creating a new layer, and adding an action to the last keyframe by opening the action tab, and typing in stop();
Unfortunately, this does not seem to do anything really, and I am confused here. If someone could PLEASE explain to me how to insert a break at the end of scene two, I will be eternally indebted!!
Oh yeah, and thanks in advance....

None that I know of. I would recommend against using scenes, but if you have no other code then that recommendation is less meaningful. Scenes are better off when used for strict animation, designs that have no code involved.
The stop() will work, you have to figure out what is keeping it from working. Compiler errors are only one way of getting the stop to not work. As I said, if you have some other code in the file it might be defeating the purpose of that stop()
(ps - your description of what you did is not exactly what I said to do)

Adobe Captivate 5.5 project - slides not playing through automatically

Hello,
This is my TOC on an Adobe Captivate 5.5 project I am working on. Slide 1 transitions to 2 no problem. However during Slide 2 I notice the time counter stops and then you have to click on to Slide 3 manually to play it ( it does not just play through). This happens again from 3-4 etc. I want the recording to play through and the viewer can decide to stop/resume/move to different chapters...
Thanks

Hello and welcome to the forum,
Probably you have an interactive object with a pause on that second slide. That is not visible on a TOC, please post a screenshot of the timeline of Slide 2. How did you create the file?
Lilybiri

Play through external speakers

When I control my computer with my iPad (via Apple TV), I want the music to play through the external speakers (connected to my Apple TV... Stereo) instead of my computer. How can I tell iTunes to play this way?

Hey Steve,
It sounds like you may want to setup AirPlay between iTunes and your Apple TV. Here is some more information on how to do so:
iTunes 11 for Windows: Choose which speakers to use
http://support.apple.com/kb/PH12351
Use speakers connected to an AirPort Express network, Apple TV, or another AirPlay-enabled device: Click the AirPlay button at the top of the iTunes window, and choose the speakers from the pop-up menu that appears.
Thanks,
Matt M.

Audiobook playlist not playing through

I have an audiobook playlist that does not play through (can repeat audiobook tracks or play a single track on repeat, but not play through the list). I have used this function before, but it is not working now. Suggestions?
To clarify:
Repeat plays a track once
Repeat off plays a track once
Repeat(1) plays the same track repeatedly
I want the playlist to play through in sequence. It works fine on iTunes on my Mac.

I just tried that on my 5th gen nano, and it does seem to work that way for audiobooks. I put audiobooks on a playlist, and tried to play them (on the iPod) both directly and through the playlist. It goes back to the list of audiobooks at the end of each item. So, I think that's the way the iPod's software is designed, for playing audiobooks.
The only work-around I can think of is to change the Media Kind of the audiobooks (the ones on your playlist) from Audiobook to Music. You can do this by selecting all of the audiobooks on that playlists at the same time, and doing a Get Info on the selection (right-click - Get Info). On the Info window's Options tab, change Media Kind to Music. Then, iTunes and the iPod will treat the audiobooks as songs. You'll need to sync the audiobooks again. If you use automatic syncing, select the playlist on the iPod's Music screen (in iTunes), not the Audiobooks screen. The problem is that, since they are being treated as songs, the iPod will not save the current location (when you stop listening) and offer to Resume at that location (later).

I want my appletv to play through my Panasonic DVD home theater system

Similar Messages

Maybe you are looking for