I want my Mail to not make a thread out of all related messages into one. I hate it.

With my new Mac came the new Mail. Now I hate it. It puts everything on to a single thread of messages. And if you open the thread and there is more that one unread message, you can probably skip one of the unread.
I exactly what happens in GMail.
Does somebody know how to undo this?
Thanks.

Open Preferences for Mail
Open Viewing
Deselect Include related messages
Allan

Similar Messages

I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

Open up your site definition (double-click on the site name in the File panel or choose Site > Manage Sites > Edit) and go to the Remote Info category. There, click Use Firewall (if it isn't already selected) - press Test to try the default firewall settings. If that doesn't work, click Firewall Settings. You'll see two relevant settings about 2/3 down - Firewall host and Firewall port. If Firewall port is 21, there probably is something blocking the port.
On Windows XP, you may have the Windows Firewall installed and blocking. Here's how you get to it:
To open Windows Firewall
1.
Click Start and then click Control Panel.
2.
In the control panel, click Windows Security Center.
3.
Click Windows Firewall.
Once you have that open, you'll need to set Dreamweaver as an exception to blocking:
On the Exceptions tab, click Add Program.
In the list of programs, click the name of the program (Dreamweaver) that you want to add, and then click OK. If the name of your program is not in the list of programs, click Browse to locate the Dreamweaver.exe in the Program Files folder and then click OK.
Hope this helps - Joe
Joseph Lowery
Author, Dreamweaver CS4 Bible

My visual voice mail is not working..i have done all the steps that I have seen on here to do. When I call the voice mail it says that there is not a box set up and I need to contact my system administrator.

My visual voice mail is not working..i have done all the steps that I have seen on here to do. When I call the voice mail it says that there is not a box set up and I need to contact my system administrator.

I have had voice mail set up on my phone for 10 years. When I did the last iOS update before 7 I guess it wiped out my voice mail. Can I not set it up myself? I haven't changed my message in years.

I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

Thanks - I guess it is like there were two of me!
I bought the iPhone first and it seemed natural to link it to the (work) e-mail address which was in constant use. The iMac for home use came next and it seemed natural to use my home e-mail address, particularly as I knew by then that I would lose the work address after my imminent retirement. The same logic went for the recent puchase of the MacAir. I am not sure what happened with the iPad (also a recent purchase) - iTunes seemed to puch me towards the same ID as the iPhone.
It is not a huge problem - just makes my persona look schizoid! Otherwise very happy with everything Apple.

How to make it a default for all received messages to not preview the attachment but instead show the icon? (mac mail.app)

Hi
I am having trouble with large incoming mail attachments.
When I receive a large attachment (pDf) the useful mail preview feature attempts to show a preview of the attachment. Unfortunately this is causing a lot of trouble as some PDFs are extremely large and therefore take time to open/preview. If I right click the attachment and select view as icon, the problem with that specific message ceases as the attachment is no longer previewed.
How can I make it the default for all attachments in received messages to only be shown as a icon and not previewed?

In Terminal,
defaults write com.apple.mail DisableInlineAttachmentViewing -bool Yes

Mail does not make sounds.

I am using Lion on a new MacBook Air, and after migrating my old data from my old MBP, I noticed that Mail no longer makes sounds for new mail or sent mail. I did some research and found something related to IMAP settings, but I use POP, and still don't get the sounds. Any help?

Mail > Preferences > General > New message sound

Mail: How do I collect a bunch of email messages into one document?

After 5 years of collecting the email messages on an application we are making I need to collect all these emails into several documents (pdf would be nice). One for out going, incoming, etc.
I guess I was thinking I would just save as pdf for each message not thinking that the project would go on for these 5 years. I have quite a few docs, now, several hundred, might be over a thousand once I start looking into everything.
Running:
Snow Leopard 10.6
Mail 4.6
on a gmail account if that matters.
Thanks Ken

Nice and easy, thanks.
Is there anyway to retain the subject line as the file name like when you save as pdf for a single message?
When I save multiple messages in this manner I am asked for a file name before the save button activates. The save then titles each file xxx-1, xxx-2 and so on.
Ken

I am not receiving messages from Banks related messages into BBM Z10 phone

Hi all,
Could you please let me know how can i receive the messages related to BANKS.
Earlier i use to receive when i am using different phone and but now i am not able to.
Is there any text messages setting that need to change.
Please consider this has high priortiy and provide me the solution

from Banks?
As in the bank with which you do business?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mail will not send to a Group (at all)

I have a group of 5 (yes, only 5 people so no mass mailing limitations) people created in Address Book
I've dragged the Group name across into my email
When I Send, I get an error saying there are no addresses in my email
So I edit the email...ask it to Expand the Group...I get a blank
I've checked each person in the Group and their emails are present and correct
Anybody have any idea what's going on here? Thanks...

I have the same problem with Mail (4.5). I have never had this issue before and have been using groups for years. There are 12 student email addresses in my group. I get no error message when I try to send. Nothing at all happens. It is like I never clicked on the "send" button. I checked all the addresses to be sure they were valid. I emailed each person separately and that worked fine. Obviously I don't want to send out 13 emails, though. I tried typing the name of the group into the address field and I tried dragging the group name from Address Book (5.0.3). Nothing. I am also noticing on my ipad, that the groups I made today to test this out will not be recognized by iTunes so I can't sync them.
I would really like to find out what's going on, too. Thanks.

Mail does not correctly reflect read status of Gmail IMAP messages

Apple Mail is no longer correctly reflecting the read status of emails that have been read on other devices/computers when viewing my Gmail IMAP inbox. Whereas my iPhone and Gmail account both show changes in items' read status immediately or on next mail retrieval, in Apple Mail the only way I have currently of updating the read status is to quit Mail and restart it. Neither automatic fetching of Mail, nor clicking "Get Mail", nor right-clicking the Inbox and choosing "Synchronize Gmail" work.
My other IMAP account (MobileMe) does not exhibit this behaviour, but Mail.app does this with Gmail on both of my desktop computers.
Anyone out there with a similar problem? And are there any possible solutions, or is it a bug/incompatibility with GMail?

This problem is still occurring for me in 10.5.5 - I even tested it by creating a new gmail account with only 1 message in it, in case it was a problem with large mailboxes, and the same thing happened.
Mail messages marked read elsewhere are not updated in Mail on the next send/receive. I wonder if everyone with this problem could report the bug at http://www.apple.com/support/feedback and see if we can get this solved in 10.5.6

Mail App won't let me reply/reply all to messages

Hi folks,
Unfortunalty, I have a problem on my hands. My Mail application won't let me "Reply" or "Reply all" to certain messages. I noticed so far that I cannot reply to messages from the GMail domain. If I click on "Reply" or "Reply All", the buttons toggle like they have been clicked, but nothing happens. When I look in the Console application, I see the following entry every time I hit those two buttons:
2006-09-10 16:28:54.794 Mail[1654] * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
Now, I also cannot attach anything to any message. This is a consistent problem that is a real pain! If I want to send an attachment, I have to go to the webmail portal and use that to send messages with attachements. When I click on the paperclip icon in the toolbar, I see this message in the Console application:
2006-09-10 16:51:13.154 Mail[1654] Exception raised during posting of notification. Ignored. exception: * -[NSCFArray insertObject:atIndex:]: attempt to insert nil
What does this mean and what can I do to correct this issue? Thanks in advance!
Jaime Rios
PowerBook G4 Mac OS X (10.4.7)

Hola Jaime.
This problem in Mail is usually caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer.

Make a router out of a simple notebook with one NIC (buy a second NIC)

Hello all,
Before starting, I think I must say hello to you because I'm new here : this is my first post . So, in fact, I'm working with Linux since 5 years. I'm running Gentoo on my workstation and my old server, Ubuntu on my notebook and for family, and finaly, I'm running Red Hat at work place for workstation and servers. I'm a Linux and JBoss administrator .
I've decided to run/try Arch because it seams to growth with rock-solid ideas and it's a binary distribution. I now prefer a binary distribution for my server, because it's taking too much time to let old computer or notebook compile the whole world (alone or not ...). I prefer now looking around and learn another Linux distribution. This is why I started to install my first Arch Linux : I will try to run a server on a simple notebook. In fact, it's a working machine, but without any graphics capabilities (memory has burned...), and so, perfect for a little server low consumption. I want it to replace my current server/router running Gentoo on an old Pentium 3.
For now, I've encountered these little problem :
- LID problem when screen is close : reboot never work (power off just after the BIOS, when the LID state is "screen closed"...) => disable LID connection (unplugged from motherboard)
- ssh problem => must now use "/etc/hosts.allow" to let remote machine to be connected
- try routing packet with one NIC => for now, doesn't work ...
- try to get X11 Forwarding => doesn't work too, but it will works quickly
My infrastructure is just a server/router splitting in two part for the LAN at home :
- one part is LAN with all workstations
- the other part is LAN_router which is another network with only the ADSL router to access internet
So, its looking like this : <machine1> => <switch> => <[eth1]server/router[eth0]> => <switch> => <router_ADSL> => INTERNET
All is fine ... with the old machine ... for the new one, it has only one network interface ... The question is : how to do routing with only one NIC ???
In theory, I "should" work ... but .. some component can have some little hard time to do the right things .. and for me, is not working right now.
The first try is to use one interface with one IP aliasing, like this :
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:1d:e4:a3:d5:1a brd ff:ff:ff:ff:ff:ff
inet 10.2.1.8/26 brd 10.2.1.63 scope global eth0
inet 10.2.1.66/26 brd 10.2.1.127 scope global eth0:0
inet6 fc80::21a:e2ff:fea3:d56a/64 scope link
valid_lft forever preferred_lft forever
Two sub network are used :
- 10.2.1.0/26
- 10.2.1.64/26
I must have 2 ip on one NIC, so aliasing can be used (when testing, the new server/router is able to ping a workstation and the ADSL router ; it can also use internet). I've heart there is some problem with "iptables" to set forwarding rules when using IP Aliasing ... but I prefer try myself . It doesn't work for now, probably because of this. But, is there a way to use a "workaround" ? For example, if "iptables" is not able to play with aliasing, and so, interface such as "eth0:0", may be there is a way to tell it, like this :
[root@serveurn ~]# iptables-save
# Generated by iptables-save v1.4.10 on Sun Dec 12 17:30:01 2010
*nat
:PREROUTING ACCEPT [0:0]
:INPUT ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
-A POSTROUTING ! -d 10.2.1.0/26 -o eth0 -j SNAT --to-source 10.2.1.66
COMMIT
# Completed on Sun Dec 12 17:30:01 2010
# Generated by iptables-save v1.4.10 on Sun Dec 12 17:30:01 2010
*filter
:INPUT DROP [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [9:932]
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -s 10.2.1.0/26 -p tcp -m tcp --dport 22 -j ACCEPT
-A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
COMMIT
# Completed on Sun Dec 12 17:30:01 2010
... use the interface "eth0" (for the whole throughput) and do SNAT for all excepted for the LAN network ? But it seams to not work ...
I got a second idea : if it wan't work with aliasing ... may be can I use virtual interface and bridge ... create a bridge with "eth0" and "tap0" so I can add more than one ip in the machine .. and may be, will be able to route packet from these two interface ???
But for now, I have to understand why X11 Forwarding don't work ...
EDIT: xorg problem solved : xorg-auth was requested ...
Last edited by loopx (2011-01-09 18:08:28)

fukawi2 wrote:" ...it is dirty and nasty and shouldn't be done unless you're stuck on a deserted island and your only hope of rescue is building a router out of 2 coconuts, a sea shell and a single NIC that was washed up on the beach in the last storm. "
PRICELESS !!
@loopx: Honestly: return the USB NIC you just got, buy a compatible device(maybe an asus rt-n16) and install dd-wrt. You'll be a lot happier....
Last edited by Daniel_F (2011-01-10 00:34:08)

Share Point mobile view not working for Custom & Out of Box Web Parts into mobile devices

Hi All,
When we open our share point application in mobile view it gives an error mention below:
some apss, such as content Editor are not supported in mobile view.Tapping on the Title area can bring up navigation window.
We have custom Page Layouts & Master Page with custom Web Parts.
Please revert asap.
Sachin

Hi,
According to your post, my understanding is that you had an issue about the Mobile Devices.
Did you use the IOS Mobile Devices?
Per the pervious threads, we should use the IOS 7 and the above verison.
http://social.technet.microsoft.com/Forums/en-US/b69a342b-b9a3-43f6-b890-c3c3cd7f655c/some-apps-such-as-web-part-page-title-bar-are-not-supported-in-mobile-view-tapping-on-title-area?forum=sharepointadmin
More reference:
http://social.technet.microsoft.com/Forums/en-US/b69a342b-b9a3-43f6-b890-c3c3cd7f655c/some-apps-such-as-web-part-page-title-bar-are-not-supported-in-mobile-view-tapping-on-title-area?forum=sharepointadmin
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Conversation view not grouping all related messages - Outlook 2010

Hello, I have 2010 and just started a new job with a new laptop...so the first thing I did was go straight to Outlook to setup my Conversation View, along with all other rules and such I had before. However, it's not working properly. First off,
it's not including all my sent messages in conversations...only SOME of the time.
Second, and more importantly, it's creating more than one Conversation for each group of messages. I tried to include a screenshot below, but it wont let me because I just signed up so I'll describe it. There are two conversation groups for 'My First
Expense Report' with Brenda. The first conversation is when she first replied to my message. The second separate conversation started with my response to her reply, and then her second reply. These should be grouped together!
Brenda and I are the only two people in the thread, and the emails happened today. This is worse than not having conversation view at all, because I'll see a conversation and think all messages are there...but they're not, they're in some other conversation
for some unknown reason.
It's driving me crazy as an avid Outlook user. This didn't happen to me on the same version in my old job and I'm afraid I'll miss important stuff. Can anyone help?

Hi,
Since I don't know your detailed view settings, I suggest you exit Outlook first, then start Outlook with the switch "cleanviews":
Press Win + R and type “outlook.exe /cleanviews” in the blank box, then press Enter.
Then re-set the Conversation View to try again:
http://office.microsoft.com/en-in/outlook-help/view-email-messages-by-conversation-HA010362041.aspx
Additionally, do you use Exchange 2003 or Exchange 2007? There are some known issues with Outlook 2010 & Exchange 2003 or Exchange 2007:
http://www.slipstick.com/outlook/outlook-2010/conversation-groups/
Regards,
Melon Chen
TechNet Community Support

Mail--undesired image at top right-hand of all outgoing messages

We have tried unsuccessfully to remove an unwanted image which originated in our photo folders.It seems to have been installed as a stationery addition & shows as a thumbnail at the right-hand top corner of the text body of any message we send. It only appears once sent, you do not see it while typing & sending. If we open any of our sent messages--there it is. If we send ourselves a message --there it is.
It is a scary looking eyes & nose--not appropriate.
We found it's source in Photos & removed fromthere as well as photo Trash bin.
Please can anyone suggest how to get rid of this unwanted image.

Open Address Book and locate your personal entry. You will see the image entered there. You can remove it or replace it with one more desirable. The image only appears when composing a message and is not actually included with sent email.

I want my Mail to not make a thread out of all related messages into one. I hate it.

Similar Messages

Maybe you are looking for