I want my website hosted on my hosting providers server

Hi all,
I have configured my new domain and server, but when I now browse to my parked domain, it can not get there... goes to my server.
I want to use the server for cal and web dev; ie: dev.mydomain.com, but when I browse to www.mydomain.com, I want it to take me outside to my hosting provider where my real website is located.
Can this be done?
Message was edited by: theLanester

Hi
Yes. Add an A Record in the DNS Service for your website (www) and assign it the external IP Address. Make sure your ISP's (or any other suitable DNS Servers) DNS Server IPs are listed in the Forwarders section.
This has been asked and answered many times before.
Tony

Similar Messages

I want to know detail of transferring existing website(live) into Cloud Host site facility.

Dear Creative Cloud Support,
Right now I am one of your customer, and already using Adobe web premium product since CS3, right now I am using your CS5 web premium.
And has intention to subscribe for Adobe Cloud.
I am interested to know more detail about your host site facility in Adoce Cloud Host Site (5).
In relation with its features and maximum capacity 20 GB as a member.
My questions:
1.Is this facility only for new domain name or can be used for existing website (live)?
2.Do we transfer a whole website content into this Host Site? Or only a link?
3.If it a facility similar principle like web hosting, what database engine, and language it support?
Maybe my questions are not relate at all with your Host Site terminology, if so please explain more detail about it or direct me to read your article of how step by step we can utilize this service.
Thank you so much for your attention, and I am looking forward to hear from you at my email: [email protected]
Sincerely,
Budhi Suwardi.

Hi Budhi,
1.Is this facility only for new domain name or can be used for existing website (live)?
If you already have a domain you can associate it with 1 of the 5 sites included with the BC web hosting services included with Creative Cloud
2.Do we transfer a whole website content into this Host Site? Or only a link?
You can create and publish an entire site, this is typically done with either Dreamweaver or Muse.
3.If it a facility similar principle like web hosting, what database engine, and language it support?
The service that does the hosting is Business Catalyst and the included service is webBasics. This FAQ has info about the service.
http://www.adobe.com/products/business-catalyst/faq.html
These videos might be useful too:
http://tv.adobe.com/watch/learn-creative-cloud/publishing-and-managing-a-website-with-crea tive-cloud/?go=13698
Dreamweaver
http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-dreamweaver-cs6-what-is-business-catalyst
http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-dreamweaver-cs6-creating-and-publishing-sites/
Muse
http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-muse-what-is-business-catalyst
http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-muse-creating-and-publishing-sites
We also have a forum specifically for Business Catalyst here:
http://forums.adobe.com/community/business_catalyst
They should be able to answer any additional questions you might have.

Is it possible to add a community calendar to a website created in Muse & hosted on BC without resorting to a 3rd party widget?

I need to add a searchable community calendar or events list to a website created in Muse & hosted on BC.

Many thanks, but it's not quite what I'm after.
I need something that let's a 3rd party submit an event which is then submitted for approval by an admin.
I have found this which at the moment is in free beta.
Tockify | Create a Web Calendar or Event List for your community

How to read a table from one host to other host

Hi Everybody,
How to read a table from one host to other host.
For Example,
a/a@abcd - host 1
b/b@xyz - host 2
suppose im having a table called emp in a/a@abcd
i want to read the table emp in b/b@xyz
how to do this.??
I know that we have to create a dblink...after that how to proceed.
Plz help..
Thanks in Advance,
Gita

connected as scott/tiger@test
SQL>
CREATE DATABASE LINK local
CONNECT TO admin IDENTIFIED BY pinnet
USING 'pinnet';
Database link created.
sql>
select count(*) from
users@local;
COUNT(*)
16
Message was edited by:
jeneesh

RADIUS-3-NOSERVERS: No radius hosts configured or no valid server present in the server group

Hi,
I currently have an C2960 switch with IOS 15.0(2) SE4. To log on the CLI of the switch authentication against a RADIUS server takes place. Accounting is not wanted. The config of the switch is as follows:
aaa new-model
aaa group server radius RADIUSGROUP
server xxx.xxx.xxx.1 auth-port 1812 acct-port 0
server xxx.xxx.xxx.2 auth-port 1812 acct-port 0
aaa authentication login default group RADIUSGROUP local
aaa authentication dot1x default group RADIUSGROUP
aaaauthorization network default group RADIUSGROUP
radius server host xxx.xxx.xxx.1 auth-port 1812 acct-port 0 key 7 [encrypted password]
radius server host xxx.xxx.xxx.2 auth-port 1812 acct-port 0 key 7 [encrypted password]
It works fine, the authentication and the login are successful, but every login generates a message in the logging of the switch:
RADIUS-3-NOSERVERS: No radius hosts configured or no valid server present in the server group
What is going wrong???
Any help would be appreciated.

That's going to be something you are going to have to go the cisco TAC with . That looks to be some kind of software bug. Also a feature probably not a lot of people actually use and have knowlwedge about.

Is possible to purchase the program and host it on our own server?

Is possible to purchase the program and host it on our own server?

Like so many questions, the answer is: yes... maybe.
Mac OS X Server includes a web server, so it's entirely possible (trivial, even) to create a web site on your server.
Making it available to the outside world depends a little bit on your network connection - you'll probably need to tweak your router/firewall configuration to let external connections into your server.
Then you also need to consider your network speed - remote users will be limited to the upload speed of your link - if you're on a residential link that might not be all that fast. In addition, many large ISPs restrict the running of servers on residential connections (you don't say whether your server is located on a business or residential link).
Beyond that, though there are various back-end technologies that you can use to add dynamic elements to your pages (so they're not just static HTML pages). Things like PHP, Perl, Ruby, Python and more are built in, as is MySQL if you want a databased-driven site. Some technologies are not supported, though, such as ASP. Therefore you might need to consider what dynamic content system (if any) you want to run.

Daemons for hosts.allow and hosts.deny?

I want to use hosts.allow and hosts.deny to restrict access to my servers, but I'm not sure what daemons to use in the config files for services like remote desktop or server admin. Is there any way to specify those services? Can you do it with port numbers instead of service names (man 5 hosts_access wasn't very clear to me).
For services like http and ssh, its a no-brainer, but I can't figure out the Apple specific stuff.
Thanks,
Miles
11 G4 XServes... Mac OS X (10.4.5)

If you are referring to the python script, "denyhosts" that works in conjunction with xinetd, this simply works under 10.3.x, I've used it once successfully. It needs to be configured correctly, but it does work. Did not try it with 10.4, but...
the far better option is described by Leland.

How do I get RDP Access to Hyper-V host when DC and DHCP server is down and is a VM on that host.

My host machine is a Windows Server 2012 running SBS 2008 as a VM.
How can I configure a Hyper-V environment to allow me to RDP into the Hyper-V host in order to start individual VM's.
It seems that without the DC running (which happens to be a VM on the same host) the host does not have an IP address that I can RDP to. I also cannot assign it a static IP.
With the VM DC running I can RDP into that and then RDP from that to the Hyper-V host but I would like to be able to have the ability to access all VM's and be able to start and stop them as required, remotely.

The SBS 2008 server has a static IP and the NIC on the Hyper-V host is used by the Virtual Switch so a static IP cannot be assigned to the NIC on the Hyper-V host.
If you only have one physical adapter in your Hyper-V host and it's hosting the virtual switch, then you'll need to create a virtual adapter on it for the host to use.
You can check the "Allow management operating system to share this network adapter" in the "Virtual Switch Manager" inside "Hyper-V Manager". You'll automatically get a network adapter that shows up with the others on that system where you can give it IP
and DNS information.
You can also do it in PowerShell:
Add-VMNetworkAdapter -ManagementOS -SwitchName ((Get-VMSwitch).Name) -Name Mgmt
New-NetIpAddress -IPAddress ###.###.###.### -InterfaceAlias "vEthernet (Mgmt)" -DefaultGateway ###.###.###.### -PrefixLength ##
Set-DnsClientServerAddress -InterfaceAlias "vEthernet (Mgmt)" -ServerAddresses ###.###.###.###, ###.###.###.###
Then you'll have an IP you can connect to from remote systems.
Eric Siron Altaro Hyper-V Blog
I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.
"Every relationship you have is in worse shape than you think."

How many $Target/Host or $Target/Host/Host ... etc do you need to go

Hello
Can someone please help me with the following question as I am learning authoring at the moment, thanks
I see from Brian videos that some times you need to use just $Target/Property... and other times $Target/Host/Property...
or even $Target/Host/Host/Property... and so on.
I get the idea (or at least I think I do), in as much as the further you are away from the Host (e.g. the deeper down embedded in the XML) you have to step back up using Host or Host/Host etc. a bit like when transversing a file system using ..\.. or ..\..\..
So for a registry discovery you would say $Target/Host/Property... e.g. use Host one time.
My question is.
is this always the case for a discovery?
How do I know when I should use $Target/Property and when to use $Target/Host and $Target/Host/Host etc.. is there any easy well to tell?
Thank you
AAnotherUser__
AAnotherUser__

Just a little modified previous script:
function Get-SCOMClassHostElement {
param(
[Microsoft.EnterpriseManagement.Configuration.ManagementPackClass]
[Parameter(Mandatory = $true)]
$ManagementClass,
[Switch]
[Parameter(Mandatory = $false)]
$KeyOnly
function Get-SCOMClassKeyProperty {
param(
$ManagementClass,
$MPElementPath
$ManagementClass.PropertyCollection | ? {$_.Key} | % {$MPElementPath + "Property[Type=`"" + $_.Identifier.Domain[0]+"!"+$ManagementClass.Name+"`"]/"+$_.Name+"`$"}
If ($ManagementClass.Hosted) {
Get-SCOMClassKeyProperty -ManagementClass $ManagementClass.FindHostClass() -MPElementPath ($MPElementPath + "Host/")
If ($ManagementClass.Base) {
Get-SCOMClassKeyProperty -ManagementClass (Get-SCOMClass $ManagementClass.Base.Id) -MPElementPath $MPElementPath
function Get-SCOMClassAllProperty {
param(
$ManagementClass,
$MPElementPath
$ManagementClass.PropertyCollection | % {$MPElementPath + "Property[Type=`"" + $_.Identifier.Domain[0]+"!"+$ManagementClass.Name+"`"]/"+$_.Name+"`$"}
If ($ManagementClass.Base) {
Get-SCOMClassAllProperty -ManagementClass (Get-SCOMClass $ManagementClass.Base.Id) -MPElementPath $MPElementPath
$MPElementPath = "`$Target/"
[Array]$ManagementClassProperty = Get-SCOMClassKeyProperty -ManagementClass $ManagementClass -MPElementPath $MPElementPath
If (!$KeyOnly) {
[Array]$ManagementClassProperty += Get-SCOMClassAllProperty -ManagementClass $ManagementClass -MPElementPath $MPElementPath
$ManagementClassProperty | Select-Object -Unique
New-SCOMManagementGroupConnection
$ManagementClassName = "Microsoft.SQLServer.Database"
$ManagementClass = Get-SCOMClass -Name $ManagementClassName
Get-SCOMClassHostElement -ManagementClass $ManagementClass
Vladimir Zelenov | http://systemcenter4all.wordpress.com

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I've created a CNAME entry to redirect the domain to apple but the site is still not live! Can anyone help please?
Did you also do what is required in the .Mac account settings?
http://help.apple.com/mac2/1/help/member/pgs2/memfmsetgen367.html
Could you provide your urls?

How to share file between windows server host and hyper-v windows server ??

Hi there
I installed windows server 2012 r2 as my host windows and again installed windows swrver 2012 r2 on hyper-v in one system .
now when I go to file explorer > netwrok there is no computer name to share file or folder between them
How can join both windows to netwrok place in file explorer to share file and folder
before I try windows 8 as my host and server 2012 r2 as hyper and when I went to file explorer > network there were to pc's there . first windows 8 and second win server 2012
but when both windows are server there isn't and network pc's in network location on file explorer
please help me how can I bring them both server to file explorer > netwrok
Thanks
Regards :
Raha
whit the best regard : Raha

Hi
thanks to you both
but when we install windows server as host there is not our windows in the
Internet\Network and sharing center\ ....... and in the file explorer > network
I found it when I add server host in server manager in guest server and manage it as host server user and then share files and folders from computer management and then create a shortcut from the share folder to desktop
and the did same for guest ... add guest server in server manager in the host server and manage it as guest server user and then share it's files and folders from the computer management and create a shortcut of share folder to desktop
if host windows be a client windows so this is so easy because after we install hyper-v win-server and go to file explorer > network > so we able to see both windows and all files and folders there but if host windows be a win-server we can't see them
in file explorer > network
thanks you both again
Best Regards :
Raha
whit the best regard : Raha

X connection to :0.0 host broken (explicit kill or server shutdown)

Hello All,
I strongly believed in using JAVA Swing GUI, for huge data visualization.
Now I encounter a problem:
I start up my application, and things work very well and looks pretty fast.
I try and create a JPanel with is almost 11.3MPixels (just length), and I don't have any problem. However, if I try and create a JPanel 15.4MPixels (just length), my application crashes and I receive a weird error - "X connection to :0.0 host broken (explicit kill or server shutdown)". This happens only on Linux (I am using Debian). I bumped Xmx till 1024m (My system has more than that).
If I run same application in Windows, I do not have this error at all, everything displays fine. I am using -Xmx200m.
This is not a Memory issue. I am assuming something is wrong with Java-on-Linux or I am unaware of what is happening.
Can anyone of you enlighten, and help me solve this issue?
Thanks in advance,
Jazz

Hello All,
I strongly believed in using JAVA Swing GUI, for huge data visualization.
Now I encounter a problem:
I start up my application, and things work very well and looks pretty fast.
I try and create a JPanel with is almost 11.3MPixels (just length), and I don't have any problem. However, if I try and create a JPanel 15.4MPixels (just length), my application crashes and I receive a weird error - "X connection to :0.0 host broken (explicit kill or server shutdown)". This happens only on Linux (I am using Debian). I bumped Xmx till 1024m (My system has more than that).
If I run same application in Windows, I do not have this error at all, everything displays fine. I am using -Xmx200m.
This is not a Memory issue. I am assuming something is wrong with Java-on-Linux or I am unaware of what is happening.
Can anyone of you enlighten, and help me solve this issue?
Thanks in advance,
Jazz

SCS instance installation on CI host or DB host

Hi,
We are installaing NW2004s installation (XI) on different systems on windows 2003. CI on differnet system DB on different system. Now my question is where to install SCS instance . On CI host or DB host.
SCS is must on Windows environment.
Please sugegst.
Thanks
Lisa

This is a duplicate post. Please see the discussion in the threads:
NW2004s SCS instance installation
SCS instance install on windows

Problems installing license for V7 - registration host != license host

Hello All,
I am currently trying to install the license key for a V7 Redwood installation on my PC.
(Windows XP, Oracle XE 10g, Redwood V7.0.3)
When I install the license key through the config program it appears to work, but when I check the config.log it says "Registered without licenses.". I was wondering if this was to do with the registration host and the license host being seen as a different machine by the config tool? They are the same host, but the license host refers to the machine using the fqdn.
The register.txt file contained the following lines
On license host:    N
Registration host: mypchostname
License host:        mypchostname.mydomain.corp
Database host:     mypchostname
"show license" from within Redwood Shell gives the same "Registered without licenses" text.
When I try and connect (just in case) from Redwood Explorer it says "No Redwood license installed".
Anybody else encountered (and solved) this problem?
Regards
Guy

Simon,
Thanks for your response.
Unfortunately I haven't received a new license key yet to try installing the license through RS, but I realised why I was getting the following error when I'd tried to set the license host before - the jcs_listener wasn't running!
RS> set license host mypchostname
JCS-00502: OS error: No connection could be made because the target machine actively refused it.
JCS-00342: could not open socket to Network Agent on host mypchostname, port 1529
JCS-00332: cannot obtain hardware ID
After starting the jsclistener it happily allows me to set the license host however when I try the register force command the resulting register.txt file still has the fqdn. I'm going to try and temporarily disable some of the DNS settings on my pc to see if I can stop it performing a lookup when creating the register.txt file.
regards
Guy

HT201320 I have an email account through yahoo. I am having trouble setting it upon my iPhone and can't receive or send emails!!!! I contacted Rogers and they said I need to find out the host name of the incoming server, in other words yahoos host name. H

I have an email account through yahoo. I am having trouble setting it upon my iPhone and can't receive or send emails!!!! I contacted Rogers and they said I need to find out the host name of the incoming server, in other words yahoos host name. Help!!

Yahoo's servers are notoriously unreliable. Use the "Yahoo" account type when setting it up. If it doesn't work, and you are positive the credentials are correct, wait a while and try again.
While you're waiting, set up a free gmail or iCloud email account.

Host IP address in CORBA server IOR

CORBA servers running on java orb (java 1.4.2 on Windows 2000) embed IP address and port number inside the IOR. The host information is always a numeric IP address, not symbolic host name.
My system is setup to create network traffic separation. As a result, the host on which the CORBA server is running has two network cards. The result of ipconfig command lists two IP addresses: X-net followed by Y-net. My server is being successfully accessed by CORBA processes on the X-net.
Now I need to set up some clients to access the server from the Y-net. When the clients obtain the server reference from the NameService, they cannot establish connection, because the X-net IP address embedded in the IOR is not accessible from the Y-net.
Is there a work around for this issue?
Is there an option in newer versions of java to specify a symbolic host name to be embedded in the IOR instead of the IP address?
Is there another network configuration that will achieve the same goal?

Hello,
We're you able to change CUCM IP address on Presence server?
Did you find any documentation to accomplish this?
Regards,

I want my website hosted on my hosting providers server

Similar Messages

Maybe you are looking for