I want Queue status weather it is Active or inactive
HI,
please any one let me know information about the Issue
i want Queue status weather it is Active or inactive
from which file weblogic server will get information
Reply me as early as Possible
Regards,
Srinivas
U can use the follwoing JMX Code
http://weblogic-wonders.com/weblogic/2010/01/21/jms-resources-using-jmx/
Similar Messages
-
** Message being processed - Queue status green colour
Hi Friends,
Many messages in our SXMB_MONI shows green color in the queue id column. It shows 'Message being processed'. All messages are in queue, still they are not delivered. Processing takes more hours. These messages are not EOIO queue. While we check this thru SMQ1 and SMQ2 it shows 'Running'. So, what could be the problem ...?
Kindly help friends, to solve this issue. (Points rewarded for helpful answer)
Kind Regards,
Jeg P.HI,
QUEUE STATUS RUNNING BASICALLY MEANS THT
The first LUW of this queue is currently being processed. If a queue in this status hangs for more than 30 minutes, this may mean that the work process responsible for processing this LUW has been terminated. In this case you can activate this queue again. Note that activating a queue in status RUNNING may cause a LUW to be executed several times if this LUW is still being processed in the target system at that time. We therefore recommend a waiting time of at least 30 minutes before you reactivate the queue.
HOPE THIS WILL SOLVE THE PROBLEM
PLZ REWARDS POINTS
VIKAS -
Queue status no send or waitupda in SMQ1
Hi,all:
Now our BW system can not do delta upload usually.I find some queue status nosend or waitupda in SMQ1 in source system(CRM). How to make them work usually? Can you give me some advices?
Regaards&Thanks!
zagoryhi Zagory,
which datasource are you using ? 0crm_sales* ?
have you activate it in BWA5 ?
take a look oss note 692195-FAQ: Sales Analytics and CRM-BW data Extraction
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
hope this helps.
Symptom
There may be problems or issues related to data tranfer from CRM to BW.
Other terms
CRM-BW extraction,upload,initial,delta,full upload ,Sales Analytics,
Reason and Prerequisites
There could be errors in customization or program errors due to which
data may not be transferred or incorrectly transferred to BW.
Solution
Question 1 : The Extraction from CRM to BW takes a very long time. What
can be done? (Performance Issues)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available).
How can I extract data in this case?
Question 3 : The Deltas for my data source are not extracted . What can
I do?
Question 4: How can I extract the fields, which are not provided in the
standard data source extraction ?
Question 5: I am unable to extract user status correctly.What should I
do?
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted?
Question 7: What can I do if the deleted opportunities
are not reflected in BW?
Question 8: How do I activate the metadata?
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0
and various other BW status mean ?
Solutions
Question 1 : The Extraction from CRM to BW takes a very long time. What can be done? (Performance Issues)
Suggestion 1: Please implement notes 653645 (Collective note) and
639072(Parallel Processing).
The performance could be slow because of the wrong control parameters
used for packaging.
You can change the package size for the data extraction.
Also note that changing the package size in the transaction SBIW
would imply a change for all the extractors. Instead, you could
follow the path in the bw system.
Infopackage (scheduler) > Menu 'Scheduler' > 'DataS. default data
transfer' > maintain the value as 1500 or 1000(This value is variable)
The package size depends on the Resources available at the customer side
(The no of parallel processes that could be assigned =
1.5 times the no of CPU's available approx.)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available)
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate
the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and
activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
Go to transaction RSA1 > modeling > infosources > select the
infosource > right mouse click on the selected
infosource > choose option replicate datasource
Activate the infosource.
6. Go to the scheduler for the infosource > select delta in the
update >choose the option PSA only (in the Processing tab)
> start immediately
Check the entry in the RSA7 in the OLTP(CRM system)
Question 4: How can I extract the fields, which are not provided in the standard data source extraction .
Suggestion 4: Follow the steps mentioned below.
1. Enhance Extract Structure with the required fields. (Create & include
an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double
click on the Datasource and remove the flags in the column 'Hide
Field' for all fields of Append. )
2.b)If the new fields cannot be seen in the extract structure of
the transaction BWA1 then change and save the datasource, and then
activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO .
Follow the path ->
SAP Implementation guide ->Implementation with other mySAP components ->
Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM)->
Settings for BW adapter->
Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Question 5: I am unable to extract user status correctly.What should I
do?
Suggestion 5 :Check the following notes
531875
616062
713458
700714
765281
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted.
Suggestion 6 :Check the following notes
481686
516820
603609
617411
711146
Question 7:Deleted opportunities are not reflected in BW.
Suggestion 7: Check the note 706327.
Question 8: How do you activate the metadata?
Suggestion 8:CRM BW adapter meta data has to be activated first before
it is available in the system. You can use Transaction BWA5 to copy the
meta data for selected DataSources. You can reach the transaction via
the IMG maintenance 'SAP Reference IMG -> Settings for SAP Business
Information Warehouse -> Activate BW Adapter Meta Data'. For more
information, see the documentation on the IMG activity 'Activate BW
Adapter Meta Data'. (Note 432485)
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Suggestion 9: In case of attribute datasources, it is possible that the
entry for the GUID is missing in the table SMOXAFLD.
If , for example the datasource 0CRM_OPPT_ATTR is not giving deltas
then you can follow the steps:
1)If Delta process is active for the attribute datasource e.g.
0CRM_OPPT_ATTR, then stop the delta process in the BW
system
2) In the CRM system, Make the entry in the table SMOXAFLD
for the datasource with the Key
as 0CRM_OPPT_ATTR GUID 3) Save the entry.Activate the datasource 4) Check that the above entry is replicated in smoxafld_s also after this. 5) Create a transport request manually for the following object R3TR SMO4 0CRM_OPPT_ATTR
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
Suggestion 10: The BW status are used to extract system and user defined
status.
The BW status are defined in the customization settings in SPRO.
Check for-> Status Concept for BP/Product/CRM objects
Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Goto the record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly. -
Status row for item '', activity ID '264766' does not exist.
I have developed a custom workflow which is AME configured. The workflow runs well in R12.1.2 instance. But when deployed to R12.1.3 it fails out.
error starting at line 20 in command:
exec XX_PACKAGE.XX_PROCEDURE(19098, 'XX_WF', '1:Yes;')
Error report:
ORA-01086: savepoint 'WF_SAVEPOINT' never established in this session or is invalid
ORA-20002: 3101: Status row for item '', activity ID '264766' does not exist.
ORA-06512: at "APPS.WF_ENGINE", line 4192
ORA-06512: at "APPS.XXIFMIS_ICX_UTILS", line 20
ORA-06512: at line 1
01086. 00000 - "savepoint '%s' never established"
*Cause: Trying to roll back to a save point that was never established.
*Action:
Could anyone suggest how I can debug this issue.Sosa,
When i run the wfstat nothing wrong in the info. unable to find the issue.
But, i have narrow down the issue. In the function process in my workfow i am calling a custom function called update_approval_status_new.
In this the value of the respond notification to be updated to a header table of this workflow and insert into events tables.
When i comment these two dml ( update to header status & insert into events ) there is no error.
Can any one tells me can i update and insert custom tables in workflow or not. If I want to do this, what is procedure.
Regards/Prasanth -
0CRM_SALES_ACT_1 - Statuses for CRM Sales Activity
question about status and deltas as I am proposing to use this extractor - 0CRM_SALES_ACT_1.
If I have a daily extraction frequency and I have a 100 changes in Status on any given activity do I get all 100 status change records for delta in this extractor? Or do I only get the most recent status along with the record?
I need the history of all status and activity changes, can someone suggest a conceptual solution and how it will work or if this is possible with the standard extractor, or do I need custom extractor(s) to solve.
Out of the box thinking is most welcome...I am reconsidering my option to using 0CRM_SALES_ACT_1 header extractor. My issue is that I need to track all status changes tio a particular activity in a given day. I think that the Activity header extractor only provides me with the last status.
I came across this extractor 0CRM_TSS_DTRACK - Document lifecycle processing extractor. It claims that it can track the changes in statuses and in BI (through BI Content) several cubes and queries are available to calculate status aging ect. It sounds like the right fit.
The main difference between the extractors is the delta process. AIMD vs AIED respectively. AIMD provides after images via the delta queue. Whereas AIED provides after delta images via the extractor. Can someone please simply explain that fundamental difference there?? providing an after image via extractor/delta queue. What does this implicate?
Understanding on this key difference would go a long way in making my design decisions correct...thanks for help and interest. -
Messages stucked in moni with queue status as "RUNNING"
Hi All,
Few of messages stucked in moni with queue status as "RUNNING" from the past 6 to 7 hours. all the stucked messages running on same dialog instance app server 03 (ucobpi03_PIP_03). i checked PIP appserver its working fine.
Can any one please expalin me how to clean the queues..is there any effect of other queues ?
Thanks,
Siva.Hi,
it can be due to multiple reasons....
check the interface logic built ...it can be either due to this or can be of large volume of data...
Also check the queues have been registered or not...
HTH
Rajesh -
Dynamic File Adapter status - Active or Inactive
Hi Experts
Is there any way to set the Sender/ Receiver File adapter status dynamically to inactive or active.
Is there any setting exists in the file adapters ? Please provide me possible solutions.
Thanks
FaheemHi all,
Many thnz for the response.
There is one more way of doing this as well. Just now i found that.
In the runtime workbench - Communication channel monitoring , Select the automatic control for the comminucation channel to make active or inactive .
there are options for our comm channel to run specfic date and time.
Thnz
Faheem -
Dear all,
While doing CCR i am getting the error with queue status as "SYSFAIL" in inbound queues of APO, When displyed the same saying " Enter Purchase Group" When displayed data from LUW in binary code shows material as semifinished material is it right?
I am unable to find out the material for which it shows this error, This error apperaed first time.
Please help me out How can i trace this error.
Regards,
AmolHi,
What says the application log (SLG1)
You can look there by the "TID of First LUW" entry and search by "External ID" field in SLG1.
Usually from there you can get order number, material number, plant and some other useful data. Does it bring more light?
btw. "Enter Purch. Group" error usually is seen in the inbound queue, when the purchasing group of the material master is not maintained. See SNP2 tab of the material master - it should be filled.
br,
Mikhail -
Server Admin doesn't show Print Queue status
When I look at my print queues (all 17) under Server Admin, it shows queue name, # of jobs, shared via (IPP & SMB), and printer kind (HP LJ 1022n and HP LJ P2015). It has a column for status, but this is always 100% empty/blank. Also, if I go to the Jobs tab, then I can pick "Jobs on Queue" for all the queues, but the line below for "Queue Status" is again always blank.
Is there something I can do to get this info to show up in Server Admin? I know that CUPS knows the printer status, as I can go to localhost:631 and see the status in the Printers list and the Jobs list.
It isn't life threatening. It is just annoying to have to go to the web page when Server Admin -almost- gets me everything I need to diagnose a teacher's printing problem remotely.Hi Keith
You could always consult the Print Service logs. If you set the logging levels to Debug or Debug2 you should get everything. You have to be a bit careful with this as the log can get quite large. Other than that I don’t know of anything that is available out of the box.
There may be others that can suggest a 3rd party solution that gives you the appropriate feedback you are looking for. Opening port 631 should not be that much of risk I would have thought?
Tony -
Change status from active to inactive
Hi Experts,
How can I change status from active to inactive for the InfoCube?
Thank youYou can deactivate a cube by deactivating one of the infoobject in it:
select one of the char in the cube
menu option Extras/Unlock infoobjects
The system will offer you to delete the cube content.
If you agreed, the cube becomes inactive.
Please assign if helpful -
BW Queue Status Stopped: SXMB_MONI
Hi
I am passing data from XI to BW into a Data Source via Inbound Proxy. The problem is for some of my messages I get the status as Green Flag(Queue Status- Stop)in SXMB_MONI.
That means all those Messages are not posted to Data source even though they are successfully transferred from XI.
If I manually try to restart them. It says that the message are already scheduled in Queue. But in Queue there is no entry.
Should I regenerate my proxy? Even though out of 10 I still have 6 successful Messages and rest 4 as Queue status stopped.
Can anyone suggest what can be the problem?
Regards
SwetankHi,
is there any trasaction in BW where you can register your Queues. somthing like sxmb_Adm--> register Queues...
B'cos this was the same problem that i encountered when i was using another client(105) in XI-IS when executing server proxies. Then the queues in the client system were not registered.
so check if there is any place in BW system where you can register the queues.
cheers,
Siva maranani. -
Queue Status is showing Stopped
Folks,
I am trying to pass IDOCS from XI and the Queue Status is showing Stopped . I am using two receivers.
Please let me know how to start the queue.
ManishStill the queue is showing stooped , here is the trace ,
<i><b> <Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- <!-- ************************************
-->
<Trace level="1" type="T">User: XIAPPL</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">Correct Version from 2 to 3: 3.X-Data to 4.x-Data</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="1" type="T">Syntax-Check-Flag</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPST4</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" /></b></i>
Can anybody let me know what is the problem -
Hi,
I have a File to Proxy assync. scenario. The file has been read, and then the message stops in the queue. I checked it on sxmb_moni, the message is posted on a queue and the queue status is "stopped" (with a red stop button printed on).
I have already read all the posts about this and couldn't find any solution... Can anyone help?
Thanks.
ShwethaYes connection is set proper now.
And the scenario involves EOIO
Since it is EOIO, i would suggest that you see the status of the messages in RWB (it may be in Holding)....if it is Holding then follow the lead given in this blog: /people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
Regards,
Abhishek. -
Hi All,
I am trying a file to file scenario. In SXMB_MONI the message status is "scheduled" and the queue status is "stopped".
I have tried deregistering and registering the queue.
i also tired to see the error in by double clicking on the queue ID it shows SYSFAIL. when i double click on SYSFAIL it shows a message "XI ERROR Update XI Cache Queue Stopped". for this i have also refreshed the cache. but nothing seems to help.
Anyone having a clue?
Thanx in advance.
Latika.Hi Latika,
Reason,
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
1. Try restarting J2EE stack.
2. One of the reason may be database overflow. In this case also, restart is required.
3. Check if XIAPPLUSER & XIAFUSER are locked. Also retype the password and try.
Check out Steve Winkler's response here
To Be Delivered on Adapter Message for JDBC
Regards,
Prateek -
Message Status as "Scheduled" and Queue Status "Queue Stopped".
Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena JohnHi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.
Maybe you are looking for
-
Aicc not working in Connect Presenter 6
I'm having trouble getting Adobe Connect Presenter (Breeze) v6 to work on Plateau v4.5. We've been using Breeze 3.07 for 5 years so I should know how to set it up. In Plateau LMS I've created an AICC Configuration for Breeze Presenter, created a Plat
-
Unable to connect informatica repository on database
Hi, i am facing error that unable to connect informatica repository on database thanks
-
How can I display the IP address of the user in APEX? Is there any way to avoid displaying just the Proxy's IP address? Btw - I searched the forum and found this select statement: select utl_inaddr.get_host_name(OWA_UTIL.GET_CGI_ENV('REMOTE_ADDR')) h
-
CommandButton linked to same page causes infinite loop
I'm working on an jsf application with a quite complex interface. I used to deploy it with the MyFaces implementation of jsf. Because of some irratic behavior I want to test Sun's reference implementation. Everything works just fine except when my co
-
10.4.3, Is it stable yet for Software Update?
My Mac clients are waiting for me to tell them if I have upgraded to 10.4.3 from 4.2. I have not. Still reading all the horror stories and wonder if I have missed the "good" stories, where a PBG4 had NO problems upgrading. Has Apple addressed all the