I want restore these files to the right place

Hello
have problem
have wiped these files of the folder encoding (System/Library/coreservices/Encodings/):
libArabicConverter.dylib
libCyrillicConverter.dylib
libGreekConverter.dylib
libHebrewConverter.dylib
libJapaneseConverter.dylib
libKoreanConverter.dylib
libLatin2Converter.dylib
libLatin5Converter.dylib
libLatinSuppConverter.dylib
libSimplifiedChineseConverter.dylib
libSymbolConverter.dylib
libThaiConverter.dylib
libTraditionalChineseConverter.dylib
libVietnameseConverter.dylib
And when it prepared the files from the trash folder،، And put it in a folder encoding the appeared following message :
(Sorry, the operation could not be completed because an unexpected error occurred
Error code-8062)
My question now is how re-files to folder?

Hi anas
I forgot to tell you something important
CEMETERY currently can not uninstall what her income!!
do not know what is the cause of it!
That does not make a lot of sense. Is that a Google translation from Arabic?
Anyway it may be unrelated to your stuck files so we shall proceed regardless.
If entered the trash I can watch those files and can to move it to my desktop but can not lay it down in folder encoding.
OK, well that's good. You may as well take them out of the trash and put them elsewhere for the time being, on your Desktop.
It may be the problem is that file or folder permissions have been altered.
So try this.
1. Open Disk Utility (found in Applications/Utilities) and run Repair Permissions.
After that, see if you can move one of the files into the folder as before, by supplying your Admin password when asked to authenticate.
If you still get that error,
2. Restart in Safemode. This will do a directory check.
http://support.apple.com/kb/HT1455?viewlocale=en_US
Restart again this time, normally.
3. If after trying to move it again, you still get that error, you may have to use Terminal to move them. It will consist of four parts separated by a space.
Make room so you can see those files, eg libArabicConverter.dylib
Open Terminal (found in Applications/Utilities) and type
sudo mv
and press the space bar once after mv.
Drag the file libArabicConverter.dylib into the Terminal window and press the space bar once.
Copy and paste into the Terminal window the address /System/Library/Coreservices/Encodings/
what you are doing is 1. with root permissions 2. move 3. a file 4. to this folder.
Press return and type in your Admin password, press return again.
With luck that file should now be back where it belongs.
Repeat for the others.
When finished run Repair Permissions again as you did before, even though this last step is probably not necessary.
Message was edited by: roam

Similar Messages

How to restore emlx files in their rightful place (Mail.app)

This might be the wrong place to post this, but I don't really know where else to try. The story goes like this.
My girlfriend uses mail for business and personal, but never filed any of her emails away. There they were, 2000+ emails all in one folder. I don't know why, but it drove me nuts and one evening I tried to file them all away, with hideous consequences.
I somehow managed to create two folders with the same name. I then tried to delete the empty one, but of course, as Murphy's Law dictates, the app deleted both of them.
About 60% of her emails were deleted. No undo, no look in the trash, nothing.
Boy was I in trouble. So I shelled out $80 on FileSalvage, which managed to get them all back. But of course now they come in a single folder with different names (1.emlx, 2.emlx , rather than 6378.emlx etc etc)
Now I've got them in a folder on the desktop, and I need to find a way to get them back where they belong. As the details of where they used to be are still stored in the "envelope index", is there a way of launching terminal and looking at the data in the sql lite db here? Then making some sort of applescript that will save them in the right places?
I'm fairly au fait with applescript, but have no way of finding what the previous names of these files were.
Obviously I've learnt my lesson - so no "should have backed it up" responses, please! Girlfriend still very annoyed. And it all happened 6 weeks ago!

What makes you think this could be the wrong place to post about your problem? I wish all posts here where as on-topic as yours.
Mail has some bugs and glitches when it comes to manage mailboxes. If you see strange things happening when doing so, quit Mail and make a backup of the ~/Library/Mail folder before trying to "solve" the problem by deleting anything.
Back to the problem, verify/repair the disk first (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, and making sure that there's enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), proceed as follows if you want to re-create the index:
1. Quit Mail.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong -- e.g. by dragging it to the Desktop while holding the Option (Alt) key down.
3. Locate Envelope Index and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
4. Open Mail. It will tell you that your mail needs to be "imported". Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it's "importing", but it just re-creates the index if the mailboxes are already in Mail 2.x format.
You can import the *.emlx messages back into Mail by creating a folder with an .mbox suffix (e.g. Recovered.mbox), then a Messages folder within that folder, and moving all the *.emlx messages to be imported within the Messages folder.
In Mail, do File > Import Mailboxes, choose Mail for Mac OS X as the data format, and follow the instructions to import the recovered messages. Note that Mail wants you to select the folder that contains the *.mbox folder, not the *.mbox folder itself.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder.

I have Windows 7 for PC if I view a jpg file I gat the following message - Some of the file types associated with QuickTime applications are currently associated with otherapplications. Should I restore these file type associations to Quicktime. Yes or No

After viewing a jpg file on my Windows 7 PC I get the following message and I don't know how to answer it "Some of thw file types associated with QuickTime applications are currently associated with other applications. Should I restore these file type associations to QuickTime?" Options are " Yes, No or Do not ask to perform yhis check again. QuickTime Control Panel can be used to make subsequent changes."
What shoul I do about this message?

Select no.

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

Janet.b wrote:
About 3 years old...pretty dated now I guess. Am thinking I may just need to have it upgraded by a Mac tech.
For what the Apple Store's charge you can buy almost buy a new computer.
Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
I did the drive replacement myself, got a faster drive of better quality for $300 instead.
Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
So you see what's going on here.
I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
They can offer more personalized care which you need. Clone your old drive to the new and everything.
With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

Not sure if this is the right place...Recovery or Finding missing files

Hi,
Again, not sure if this is the right place to ask, but its worth a shot.
so i've been transcribing video all day using microsoft office for mac, and was saving the project (i thought) to an external hard drive. at one point the HD came unplugged, and i plugged it back in. no big deal. i continued to save, to type, save, type, etc until finished. so when i finished and saved the project, seemed okay. when i closed word, it kept asking me if i wanted to save changes...i said yes, and it would just ask me again, did this a few times. i assumed it was asking me to save it to a new location, which i didn't think i needed so finally said no.
i then find out that somehow when the HD was unplugged it erased Words ability to save to said location. so my last save was really before the HD was removed, which is odd, because i kept saving and never was prompted the path was interrupted or anything.
so my question is two part...
1. where would i find in the depths of the computer the saved files? if i was saving, they had to have gone somewhere, but i dont know how to find them.
2. also, assuming it wasnt saving, my word prefs say it autosaves every 5 minutes, so those files must exist somewhere also, yet can't find them...
does this make sense, can anyone help me?
thanks
austin

Hi there,
In Finder, select Go menu>Go to Folder, and go to "/volumes".
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists.
See if it may be in one of those with a 1 or 2 added to it.

When I update itunes it deletes the library file, and when I restore that file from the previous libraries or my backup, itunes will run but tell me "the iTunes library file cannot be saved. A folder was specified instead of a file" How do I fix this?

When I update itunes it deletes the library file, and when I restore that file from the previous libraries or my backup, itunes will run but tell me "the iTunes library file cannot be saved. A folder was specified instead of a file" How do I fix this?

Hi there Br0x,
You may want to try rebuilding the iTunes library as an initial troubleshooting step. Take a look at the article below for more information.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
-Griff W.

I want to add an application like winrar useing rar file so i can auto download it all thet i have is a zip fill but i want a rar file too the option to auto download it is gray so i cant use it plz help me.

i want to add an application like winrar useing rar file so i can auto download it all thet i have is a zip fill but i want a rar file too the option to auto download it is gray so i cant use it plz help me.
== This happened ==
Every time Firefox opened
== all the time

Here is the answer: Not an add on or plug-in! In fact you can get rid of all those useless plugins and add-ons! Go and get it. Im using the Alpha version right now and it works great. Works better then anything else .......add multiple links for all files sit back and relax. Its all done for you with no more intervention on your part! Check it out!
http://wordrider.net/freerapid/
Only one downside to this. No proper installer. You will have to copy the files to your respective programs folder.
C:\Program Files\FreeRapid or C:\Program Files (x86)\FreeRapid
Then create shortcuts to your desktop from FRD app. Thats it then start downloading!
By the way this not an add. I just spent the whole night looking for the solution to this problem because I was so frustrated with the whole thing. I download tons of files and I have lots of other projects going and I dont have time for all this nonsense with RapidShare and Firefox. Hope this helps some other poor souls out there!

I accidentally deleted an Application on my iphone 5 and with it lost important files. How do i get back these files. The last iphone backup sync was after this so I cant even access an older back up as I cannot find them. How do I get back my Lost files.

I accidentally deleted an Application on my iphone 5 and with it lost important files. How do i get back these files. The last iphone backup sync was after this so I cant even access an older back up as I cannot find them. How do I get back my Lost files.

On your iMac launch iTunes and at the top next to the Apple symbol click iTunes > Preferences > Devices and tell me what you see. You last sync should be there showing only a device name. If you have an older backup it will be there as well the difference is it will be the device name with a date and time stamp. Sync and backups are two different things and there is a chance iTunes made a backup the first time you hooked up your iPhone 5.

HT1338 I wanted to import files but the computer says that there is not enough free space. how can i see which files take up the space?

I wanted to import files but the computer says that there is not enough free space. how can i see which files take up the space?

Here's freeing up disk space.
DALE

I have bought a new iPad 2 charger and it works absolutely fine but then I wanted to upload some pictures on the computer so I put the wire in the right places but it doesn't work so I tried my iPhone and it worked fine?

I have bought a new iPad 2 charger and it works absolutely fine but then I wanted to upload some pictures on the computer so I put the wire in the right places but it doesn't work so I tried my iPhone and it worked fine?

Plz answer as soon as possible

I have moved all of my movies from "Search for - All Movies" folder thinking they were shortcuts to the trash folder by mistake. Is there any way I can restore them to the right place on my system Note most are on an external hard drive. :(

I have moved all of my movies from "Search for - All Movies" folder thinking they were shortcuts to the trash folder by mistake. Is there any way I can restore them to the right place on my system Note most are on an external hard drive.

You can drag them out of the trash folder to wherever you wish. There is no automatic way to restore them.
If you have a recent backup of your computer (at the risk of preaching, everyone should have one), restore them from there.
Barry
P.S. I have no clue what you did or why you have 44,000 on the external drive

[svn:bz-trunk] 17133: this time finally (and hopefully) adding all the flex-messaging-opt tomcat/jrun/oracle/weblogic/ websphere servers maven pom files in the right svn folder.

Revision: 17133
Revision: 17133
Author:   [email protected]
Date:     2010-07-30 02:01:44 -0700 (Fri, 30 Jul 2010)
Log Message:
this time finally (and hopefully) adding all the flex-messaging-opt tomcat/jrun/oracle/weblogic/websphere servers maven pom files in the right svn folder.
Added Paths:
    blazeds/trunk/modules/opt/poms/oracle/
    blazeds/trunk/modules/opt/poms/oracle/pom.xml
    blazeds/trunk/modules/opt/poms/tomcat4/
    blazeds/trunk/modules/opt/poms/tomcat4/pom.xml
    blazeds/trunk/modules/opt/poms/tomcat6/
    blazeds/trunk/modules/opt/poms/tomcat6/pom.xml
    blazeds/trunk/modules/opt/poms/weblogic/
    blazeds/trunk/modules/opt/poms/weblogic/pom.xml
    blazeds/trunk/modules/opt/poms/websphere/
    blazeds/trunk/modules/opt/poms/websphere/pom.xml

How can i get the correct text from a string like it show in the original source with the quotation marks in the right place ?

The text is in hebrew so the problem is that sometimes the quotation marks not in the right place.
For example i have this text: תווית
על בגד: ''תן לאישה לכבס. זה תפקידה''
This is the source original text you can see the quotations marks and they are not in the right place and all i did is copy paste.
And this is a screenshot of how this text looks like in the website in the original:
You can see now where the quotations marks should be.
Now this is how i'm using the text in my program:
First of all i'm using a webclient to download the page from the website and i'm also encoding it to windows-1255 since it's in hebrew.
using (var webClient = new WebClient())
webClient.Headers.Add("user-agent", "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.0.3705;)");
byte[] myDataBuffer = webClient.DownloadData("http://rotter.net/scoopscache.html");
page = Encoding.GetEncoding("windows-1255").GetString(myDataBuffer);
Then i'm extracting the places i need by reading the html file lines and parsing the right text and it's link.
string loc;
List<string> metas = new List<string>();
List<string> metas1 = new List<string>();
List<string> lockedLinks1 = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
lockedThreads = new List<string>();
lockedLinks = new List<string>();
Regex textRegex = new Regex("ToolTip.*?(?=','<)");
string[] fall = File.ReadAllLines(filename);
for (int i = 0; i < fall.Length; i++)
if (fall[i].Contains("http://rotter.net") && fall[i].Contains("locked")||
fall[i].Contains("locked_icon_general") ||
fall[i].Contains("locked_icon_anchor") ||
fall[i].Contains("icon_anchor") ||
fall[i].Contains("locked_icon_fire") ||
fall[i].Contains("locked_icon_sport") ||
fall[i].Contains("locked_icon_camera") ||
fall[i].Contains("locked_icon_movie"))
Regex linkParser = new Regex(@"\b(?:https?://|www\.)\S+\b", RegexOptions.Compiled | RegexOptions.IgnoreCase);
foreach (Match m in linkParser.Matches(fall[i + 2]))
if (m.Value.Contains("><b"))
loc = m.Value.Replace("\"><b", string.Empty);
lockedLinks.Add(loc);
string txt = fall[i - 1];
string text = textRegex.Match(txt).Value.Replace("ToolTip','", String.Empty);
if (text.Contains("’"))
text = text.Replace("’", string.Empty);
lockedThreads.Add(text);
Already here on the List lockedThreads you can see the quotation marks not in the right place as in the original:
After i'm parsing the text and links and adding them to the Lists in another class i'm doing a comparison using this Lists:
foreach (List<string> l_branch in ListsExtractions.responsers)
TreeNode l_node = treeView1.Nodes.Add(l_branch[l_branch.Count - 1]);
if (ListsExtractions.lockedThreads.Contains(l_node.Text))
l_node.ImageIndex = 0;
l_node.SelectedImageIndex = 0;
for (int l_count = 0; l_count < l_branch.Count - 1; l_count++)
TreeNode l_subnode = l_node.Nodes.Add(l_branch[l_count]);
if (ListsExtractions.lockedThreads.Contains(l_subnode.Text))
l_subnode.ImageIndex = 0;
l_subnode.SelectedImageIndex = 0;
The problem is in the line:
if (ListsExtractions.lockedThreads.Contains(l_node.Text))
When it's getting to the line with the quotation marks it's never equal.
Now there are more quotation marks.
In general the problem when comparing both text if it's having quotation marks it's not the same.
So i have two options:
1. To fix it somehow so the quotation marks will be the same in both variables when comparing and also the same like in the original as they show in the html page.
2. To remove the quotation marks from both variables.
What should i do ? And how ? I was prefer to use the original quotation marks like in the original since they have a meaning in the place they should be. The question is how can i do it ?
This is example of the block from the html file where the text with the quotation marks is:
<TD ALIGN="RIGHT" VALIGN="TOP"> 9418 </TD></TR><TR BGCOLOR="#eeeeee">
<TD ALIGN="RIGHT" VALIGN="TOP">
<body onmousemove="overhere()">
<a onmouseover="EnterContent('ToolTip','תווית על בגד: ’’תן לאישה לכבס. זה תפקידה’’','כתב: Spook בתאריך: 08.03.15 שעה: 22:11 מחאת טוויטר קמה בעקבות תוויות שוביניסטיות שהדפיסה חברת אופנה באינדונזיה לפיהן תפקיד הכביסה מוטל על האישה. החברה התנצלה אך כנראה רק עשתה רק יותר נזק לע...'); Activate();" onmouseout="deActivate()" href="javascript:void(0)">
<img src="http://rotter.net/forum/Images/new_locked_icon_general.gif" border="0"></a></TD><TD ALIGN="right" VALIGN="TOP" WIDTH="55%">

<a href="http://rotter.net/cgi-bin/forum/dcboard.cgi?az=read_count&om=189696&forum=scoops1">
תווית על בגד: ''תן לאישה לכבס. זה תפקידה''
</a></TD>

Ok, it is unclear on what is happening here.
Are you saying that when the webclient gets the data that it is not honoring the quote characters? Or the processing of the data buffer is causing issues?
This is what I see the of your example text which is trying to be parse out:
<a onmouseover="EnterContent('ToolTip','תווית על בגד: ’’תן לאישה לכבס. זה תפקידה’’','כתב: Spook בתאריך: 08.03.15 שעה: 22:11 מחאת טוויטר קמה בעקבות תוויות שוביניסטיות שהדפיסה חברת אופנה באינדונזיה לפיהן תפקיד הכביסה מוטל על האישה. החברה התנצלה אך כנראה רק עשתה רק יותר נזק לע...'); Activate();">";
It appears to me that the escapes `’` does not have matching `“` anywhere within the tooltip. So it appears that the page properly places left quotes in when processing the page, but the raw html has broken text.
Hence a garbage in, garbage out situation.
William Wegerson (www.OmegaCoder.Com)

HT4436 Since installing Ios7 280 music tunes out of a total of 360 will now only play when I'm within range of WiFi. How can I get them back on my Iphone 4s and scrap this stupid icloud that I did not want or ask for in the first place.

Since installing Ios7 280 music tunes out of a total of 360 will now only play when I'm within range of WiFi. The remainder now appear with the stupid Icloud logo beside them. How can I get them back on my Iphone 4s and scrap this stupid icloud that I did not want or ask for in the first place. Why can't rotten apple ask if you want the dam icloud rather than just stealing everything without permission and then you can only have access to it through wifi.

Wow, just posting and it seems that there is a solution that is working for me...
What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice!

How do I eliminate the use and creation of big files in the profile - places.sqlite, urlclassifier3.sqlite, places.sqlite-wal?

I want to eliminate the use and creation of big files in the profile - places.sqlite (10MB), urlclassifier3.sqlite (5MB), places.sqlite-wal (1MB)?
Ffor urlclassifier, I tried disabling safebrowsing options (in security menu or in about:config), but file remains. Also if deleted it is still re-created with 5 MB.

Start at http://www.mozilla.com and download the latest
version. '''At the completion of the download don't let the setup start Firefox for you, when the setup ends, start Firefox in your normal manner this way you will be less likely to create a new profile.'''
The extra startup pages are temporary -- read them. The next time
Firefox comes up you should be back to starting with your normal home page.
'''Note: Firefox must be down once the install starts. '''
Close Firefox with File>Exit. Then make sure Firefox is not running --
On Windows: check the "Processes" tab in the Windows Task Manager.
'''On Mac: Firefox > Quit then Command+option+Esc, if Firefox running use Force quit'''
Permission errors on Mac:
'''If you were getting permission errors on a Mac, download the latest
Firefox version, then uninstall and reinstall Firefox. Do not remove
your profile directories and files as they contain your settings,
bookmarks, history, extensions, passwords, and cookies.'''
in any case once you are on 4.0 you might want to take a look at "(fx4)"
* Fx4: Firefox 4.0 Problems and Orientation (#fx4) http://dmcritchie.mvps.org/firefox/firefox-problems#fx4

I want restore these files to the right place

Similar Messages

Maybe you are looking for