I want run multiple report in d2k report 6i

hi
when i run a report then i tried to run another report. but i could not run it. cause two report dont run at a time. how can i run both report at a time. pls help me.
thanks
Mostafiz

hi thanx
may be drilldown reports is not my solution.
my problem is i have two report when i run one
then i need to close sale and run another report .
but i want to run two report one after another.
how can i solved
pls help me
thanx
mostafiz

Similar Messages

How can I want run the reports on AD, if I have no access to AD server?

I am not an AD administrator and I do not have permissions to AD server. But I have admin permissions to a site in AD and using RSAT, can administer the site. How can I want run the reports listed below? AD is on Windows 2008R2 server.
All Administrator logons
Logon statistics
Logons during non-business hours
Multiple logon failures
Password resets (other than Security Administrator)
Successful logon after several failures
User behavior anomalies
Logons of already logged-on users
All Logons Over Weekend
Audit Policy Changed
Computer Accounts Changed

Hello,
Some of your reports can be done using RSAT with Active Directory Powershell module. Some of them including
Computer Accounts Changed needs auditing to be enabled for directory object changes. These are not predefined reports which you can simply run my friend. Can you please be more specific?
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Run multiple reports simultaneously?

Hi All,
We currently use a reports server with our oracle application server 10g install. The one problem we are experiencing is that when multiple reports are running all have to wait while the current one finishes. Is there a way to set up the reports server to run multiple reports at the same time instead of one after the other?
Thanks
Troy

hi,
1st take a back up of original rep_<reportservername>.conf file and den make changes in report parameters as follows
initEngine="3" maxEngine="4" minEngine="3"
and then restart the OC4j Bi forms,for the parameters to take effect.
The above setting means 3 reports engines will be always ready n initialized..
Once done,check it how does it perform..
if your still facing problem then create a new standalone report server and make one of ur application to point to this report server
If you want to create a standalone reports server and you DO want to administer
it via OPMN and EM then please use the following steps. **
1- MIDTIERHOME\BIN> addNewServerTarget.bat reports_server_name
2- MIDTIERHOME\opmn\BIN> opmnctl reload
3- MIDTIERHOME\opmn\BIN> opmnctl startproc ias-component=<reports_server_name>
4- MIDTIERHOME\opmn\BIN> opmnctl status
PREREQUISITE:
When registering a standalone report server with OPMN/EM, if the report server
is running at the time the addNewServerTarget.bat (or, in unix:
addNewServerTarget.sh) command is invoked, the Report Server needs to be stopped
manually first (ie. in unix: "kill -9 pid" -OR- "rwserver.sh
server=report_server_name shutdown=immediate authid=username/password &) BEFORE
the opmn registration using the 'addNewServerTarget' command is performed.:
Regards
Fabian

How to run multiple reports From One Form with 1 report object?

Hi ALL!
i want to run multiple reports (in 10g technology) from 1 Form having only 1 report object.
i.e
IF parameter=yes THEN
Rpt_new should run
Else
Rpt_old should run
END IF;
How can i do this?
thanks
rana

Rana,
I found this in the Forms online Help. You could easily found it yourself. Don't be afraid of pressing CTRL-H:
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME, 'yourreportsfilename.rdf')Regards,
Martin Malmstrom

Run multiple reports through SOAP call,

Hi Folks,
We are able to run a single report at a time through SOAP call , But Is it possible to run multiple reports at a time?
Is there any solution for it or any other way to do it?

Hello,
By default, the reports server is configured with maxEngine=1
It means that ther eis only one engine and only one report can be executed at a given time.
You can increase this value in the file rwserver.conf in order to allow several reports engines to be launched by the reports server and several reports being executed at the same tilme.
regards

Run multiple reports from PL/SQL

I am planning to run reports from a PL/SQL batch program. My requirement is i need to generate multiple(around 50) reports with only a difference in one numeric parameter which will go from 1 to 50. I am planning to invoke the report inside a loop which goes from 1..50. I heard that i need to use a utl_http package which i havent used till now. Does somone has a sample code for running a report from pl/sql. i need it ASAP. Thanks in advance

hi rejesh,
we have an pl/sql API in reports to do exactly what you want to do.
The Reports Event Driven Publishing API
find the documentation including examples in the reports getting
started on technet.
http://otn.oracle.com/products/reports/htdocs/getstart/docs/a92102_01.pdf
Chapter 11
regards,
christian

Run multiple reports with one button

Hello, I am new to Oracle Form Builder and I have a generic form built that has a button the user will press to run a specified report. I'm wondering if it's possible to use the same form with the one run report button to print multiple reports at the same time. Is this possible?

I recommend that you start here:
http://blogs.oracle.com/shay/entry/10_commandments_for_the_otn_fo
You can do just about anything in Forms if you are creative enough. However, exactly how you do it will partially depend on things like which version you are using, the platforms (OS on client and server), and the preferred behavior you would like to see.
Here is an older document whch explains how to integrate Forms/Reports. This old doc mostly still applies to the latest versions.
http://www.oracle.com/technetwork/products/migration/frm10gsrw10g-132606.pdf

Can I run multiple reports and generate 1 PDF File

Hi
I would like to create multiple reports, run them, and generate 1 PDF output. Is this possible?
Regards,
Néstor Boscán

Hello,
Take a look to the thread :
Re: How to append pdf (Very Urgent plz)
Regards

Run Multiple report with one click

hi
I have 60 reports with me and i want to run all 60 reports with one click. Is it possible to fire next report at the end of previous using code?????
Any help would be appreciated

Hi Swapnil,
Yes it can be done in many ways. But you will need to analyze what exactally is required and what kind of reports are to be executed in sequence. WHats the report supposed to do, do they need to send some file or some data to external world, does it need to display any output?
From within the program you can use the SUBMIT command to call each report program one after the other. Or schedule all the 60 reports in a background job such that each report is executed in each step.
There are many other ways but i am really not sure why there is such a request? This is something really out of the odd :-).
Hope this helps
Cheers
VJ

Run FDM Report on Multiple Location

Hello,
We are on FDM 11.1.2.1. What I'm trying to do is design/change one of the can reports out of FDM so that it will run on multiple locations. I can get the report to run on the current location, a location selected by the user or can get it to run on all locations (takes way too long). What I would like to be able to do is set it up to run the report for all of the children under a control review location. Has anyone ever attempted this or do you have any insight into how to accomplish this? Any suggestions would be appreciated.
Thank you,
Jason

Some food for thought.
The easiest way to do this would be to have a stored procedure / SQL query that the report is going to hit that will give it exactly what it needs.
- If you are OK with hard coding values into locations, I agree that the Group Tag idea is good. You could retrieve all of the locations with a query like :
select * from tPOVPartition where PartNotes = 'GroupNameHere'or assuming it is going to be used in there where clause :
Select blah blah blah
from blah blah blah
where blah blah blah and (PartitionKey in (select PartitionKey from tPOVPartition where PartNotes = 'GroupNameHere'))
- If you are NOT OK with hard coding Group Tags and want to just let the natural hierarchy work, there is hope.
By using the tStructParitionLinks table, you can traverse the hierachy and get your list.
Assuming You have nothing deeper than 1 level, the follow SQL will work:
(NOTE: Start Location would be the parent and Endlocation would be the child)
SELECT     a.StartLocationID, a.EndLocationID, b.PartName
FROM         tStructPartitionLinks AS a INNER JOIN
                      tPOVPartition AS b ON a.EndLocationID = b.PartitionKey
where a.StartLocationID = <starting parent ID>The problem here is that if you have multiple nested levels, this query is not going to return all of the base items. If you need something to do that, than what you want to do is create a nested stored procedure. I'm not going to supply one as it would take me a bit to write it up.
The basic premise is :
- The stored procedure takes an input parameter, ParentID
- The stored procedure uses a temp table to hold results
- The stored procedure keeps track of it's recursive level and starts at one. (SQL Server handles this built in, assume oracle does as well)
- When you call the routine, it takes the ParentID, scans the Partition Link table and pulls all children that are tied directly to it.
- For each of the children, it adds an entry to the temp database table.
- Then it checks to see if that child record is also a parent in the table.
- If it is a parent, it calls another instance of itself (stored procedure) this time passing the child ID as the parent ID
- Eventually after you've exhausted all of the children/parents, you end up at the end of the initial call and at this point, you return the contents of the temp table.
- A third option, would be to use FDM script to accomplish this. In theory you could kick something off in a script, have it pull the list of children, and have it pass that info to the report and run it..... The following script will give you a listing of children for a parent :
Sub ShowChildren()
'Hyperion FDM CUSTOM Script:
'Created By:       cbeyer
'Date Created:       2012-02-22-10:43:06
'Purpose:
'Declare variables
Dim lngLocID
Dim lngParentID
Dim strParentName
Dim strChildren
'Get current ID by current POV
'NOTE: You could easily change this around to accept a parameter, etc, by using GetName/GetID calls shown below.
lngLocID = STRUCTMGR.fGetLocationIDFromName(API.POVMgr.PPOVLocation)
'Get parent ID
lngParentID = STRUCTMGR.fGetLocationParent("Controls", lngLocID)
'Get Name of parent
strParentName = STRUCTMGR.fGetLocationName("Controls", lngParentID)
'Create recordset and Enumerate children
With STRUCTMGR.frsChildrenAll("Controls", lngLocID)
   If Not .BOF And Not .EOF Then
       Do While Not .EOF
          strChildren = strChildren & .Fields("PartName").Value & vbCrLf
          .MoveNext
       Loop
   Else
       'No children
       strChildren = "Location has no children"
   End If
   'Close recordset
   .Close
End With
'Display the children information
If LCase(API.DataWindow.Connection.PstrClientType) = "workbench" Then
     MsgBox "List of Children for " & strParentName & " : " & strChildren
Else
     'Web Client (Set API action properties)
     RES.PlngActionType = 2
     RES.PstrActionValue = "List of Children for " & strParentName & " : " & strChildren
End If
End Sub

How do I create a GL responsibility to access multiple ledgers (error trying to run Financial report submission)

I created a new GL responsibility and used the same menu as an existing one but created a new data access set that has all the ledgers in it that we want to access.
I left the following profile options with no value. The reason being is this responsibility should not be tied to any org/ledger.
MO: Operating Unit
GL Ledger ID
GL Ledger Name
This all seems to be working fine except when the users try to access Financial Report Submission. The error that appears when trying to choose a ledger when running the report.
Error: Stale Data
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example).
I have cleared the browser cache and cache was cleared by functional administrator. In this case it really doesn't seem to be anything to do with the browser's back button being used (I didn't use it) since I can make this error go away by setting the value for GL Ledger Name. But that is not what the users want since that will restrict them to a specific ledger but they should be able to run the report for any ledger.
Any help would be much appreciated.
Thanks

Please see (RM: Financial Report Submission: Errors With Stale Data, View Object FSGSubmissionAM.FSGSubmissionPVO1 Contained No Record [ID 1099837.1]).
Thanks,
Hussein

When I run a report from a certain website, it is in Excel format. Currently I have only the option to save it. I also want the option to open it. How do I get this option back? [SOLVED]

In IE, when I run these reports, I have the option to Open, Save, or Cancel. In Firefox it just goes directly to a folder to Save, there is no Open option, which I need. I want to view the report immediately, not save it.

I figured it out - Tools, Options, Applications. For Excel, change to Always Ask.

I want to run jasper Report as pdf to display arabic letter

i want to run jasper Report as pdf to display arabic letter butv when i use
byte[] bytes =JasperRunManager.runReportToPdf(report,parameters, conn); display ?????
i hope anybody to help me
thanks
Edited by: Amr Ahmed on May 2, 2011 2:08 AM

DECLARE
vParamList PARAMLIST;
BEGIN
vParamList:=GET_PARAMETER_LIST('MyRep');
IF NOT ID_NULL(vParamList) THEN
DESTROY_PARAMETER_LIST(vParamList);
END IF;
vParamList:=CREATE_PARAMETER_LIST('MyRep');
SET_REPORT_OBJECT_PROPERTY('report_path\emp_rep_def',REPORT_DESFORMAT,'PDF');
RUN_PRODUCT(REPORTS,'report_path\emp_rep_def',ASYNCHRONOUS,RUNTIME,FILESYSTEM,vParamList,NULL);
END;

Dont want to display "Report Successfully Run" applet

Dear Users....I Dont want to display "Report Successfully Run" applet after my report runs successfully. I'm calling report from Forms-10g Rel.2 and my browser is Internet Explorer ver.6. I'm sending my report directly to printer using Web.Show_Document.If my report is sent to printer successfully there is no need to display browser window with the above mentioned message. Is there any solution for this???

Code in when-button-pressed
DECLARE
V_Usr_Prm Varchar2 (1000);
BEGIN
V_Usr_Prm :=
'FROM_REF_NO='
|| P_FRM_REF_NO
|| '+TO_REF_NO='
|| P_FRM_REF_NO
|| '+P_PRE_BY='
|| P_PRE_BYE
|| '+P_VR_TYPE='
|| P_VOR_TYP
|| '+YEAR1='
|| P_VOR_YER
|| '+MNU_IDE=0'
|| '+P_PRN_FLG=1';
web_show_document_proc ('HTMLCSS', 'Y:\02\\02\VOR_PRN.REP', V_USR_PRM);
END;
Procedure Web_Show_Document_Proc is
PROCEDURE WEB_SHOW_DOCUMENT_PROC (runformat varchar2,
reportname varchar2,
userparameters vARCHAR2)
IS
i NUMBER (10);
v_a VARCHAR2 (10);
v_b VARCHAR2 (10);
vc_url VARCHAR2 (1000);
vc_url_temp VARCHAR2 (1000);
vc_user_name VARCHAR2 (30) := GET_APPLICATION_PROPERTY (username);
vc_user_pw VARCHAR2 (30) := GET_APPLICATION_PROPERTY (password);
vc_user_connect VARCHAR2 (30)
:= GET_APPLICATION_PROPERTY (connect_string) ;
BEGIN
vc_url :=
'userid='
|| vc_user_name
|| '/'
|| vc_user_pw
|| '@'
|| vc_user_connect;
FOR i IN 1 .. LENGTH (vc_url)
LOOP
v_a := LTRIM (TO_CHAR (TRUNC (ASCII (SUBSTR (vc_url, i, 1)) / 16)));
IF v_a = '10'
THEN
v_a := 'A';
ELSIF v_a = '11'
THEN
v_a := 'B';
ELSIF v_a = '12'
THEN
v_a := 'C';
ELSIF v_a = '13'
THEN
v_a := 'D';
ELSIF v_a = '14'
THEN
v_a := 'E';
ELSIF v_a = '15'
THEN
v_a := 'F';
END IF;
v_b := LTRIM (TO_CHAR (MOD (ASCII (SUBSTR (vc_url, i, 1)), 16)));
IF v_b = '10'
THEN
v_b := 'A';
ELSIF v_b = '11'
THEN
v_b := 'B';
ELSIF v_b = '12'
THEN
v_b := 'C';
ELSIF v_b = '13'
THEN
v_b := 'D';
ELSIF v_b = '14'
THEN
v_b := 'E';
ELSIF v_b = '15'
THEN
v_b := 'F';
END IF;
vc_url_temp := vc_url_temp || '%' || v_a || v_b;
END LOOP;
vc_url :=
'/reports/rwservlet?server=rep_appsrv_frhome1+'
|| vc_url_temp
|| '+report='
|| reportname
|| '+destype=Printer+desformat='
|| runformat
|| '+paramform=No+'
|| userparameters;
WEB.SHOW_DOCUMENT (vc_url, '_blank');
END;

Dont want to display "Report Successfully Run"

Dear Users....I Dont want to display "Report Successfully Run" applet after my report runs successfully. I'm calling report from Forms-10g Rel.2 and my browser is Internet Explorer ver.6. I'm sending my report directly to printer using Web.Show_Document.If my report is sent to printer successfully there is no need to display browser window with the above mentioned message. Is there any solution for this???

Code in when-button-pressed
DECLARE
V_Usr_Prm Varchar2 (1000);
BEGIN
V_Usr_Prm :=
'FROM_REF_NO='
|| P_FRM_REF_NO
|| '+TO_REF_NO='
|| P_FRM_REF_NO
|| '+P_PRE_BY='
|| P_PRE_BYE
|| '+P_VR_TYPE='
|| P_VOR_TYP
|| '+YEAR1='
|| P_VOR_YER
|| '+MNU_IDE=0'
|| '+P_PRN_FLG=1';
web_show_document_proc ('HTMLCSS', 'Y:\02\\02\VOR_PRN.REP', V_USR_PRM);
END;
Procedure Web_Show_Document_Proc is
PROCEDURE WEB_SHOW_DOCUMENT_PROC (runformat varchar2,
reportname varchar2,
userparameters vARCHAR2)
IS
i NUMBER (10);
v_a VARCHAR2 (10);
v_b VARCHAR2 (10);
vc_url VARCHAR2 (1000);
vc_url_temp VARCHAR2 (1000);
vc_user_name VARCHAR2 (30) := GET_APPLICATION_PROPERTY (username);
vc_user_pw VARCHAR2 (30) := GET_APPLICATION_PROPERTY (password);
vc_user_connect VARCHAR2 (30)
:= GET_APPLICATION_PROPERTY (connect_string) ;
BEGIN
vc_url :=
'userid='
|| vc_user_name
|| '/'
|| vc_user_pw
|| '@'
|| vc_user_connect;
FOR i IN 1 .. LENGTH (vc_url)
LOOP
v_a := LTRIM (TO_CHAR (TRUNC (ASCII (SUBSTR (vc_url, i, 1)) / 16)));
IF v_a = '10'
THEN
v_a := 'A';
ELSIF v_a = '11'
THEN
v_a := 'B';
ELSIF v_a = '12'
THEN
v_a := 'C';
ELSIF v_a = '13'
THEN
v_a := 'D';
ELSIF v_a = '14'
THEN
v_a := 'E';
ELSIF v_a = '15'
THEN
v_a := 'F';
END IF;
v_b := LTRIM (TO_CHAR (MOD (ASCII (SUBSTR (vc_url, i, 1)), 16)));
IF v_b = '10'
THEN
v_b := 'A';
ELSIF v_b = '11'
THEN
v_b := 'B';
ELSIF v_b = '12'
THEN
v_b := 'C';
ELSIF v_b = '13'
THEN
v_b := 'D';
ELSIF v_b = '14'
THEN
v_b := 'E';
ELSIF v_b = '15'
THEN
v_b := 'F';
END IF;
vc_url_temp := vc_url_temp || '%' || v_a || v_b;
END LOOP;
vc_url :=
'/reports/rwservlet?server=rep_appsrv_frhome1+'
|| vc_url_temp
|| '+report='
|| reportname
|| '+destype=Printer+desformat='
|| runformat
|| '+paramform=No+'
|| userparameters;
WEB.SHOW_DOCUMENT (vc_url, '_blank');
END;

I want run multiple report in d2k report 6i

Similar Messages

Maybe you are looking for