I want some help for the layout of MuCow widget

Hii
I was browsing the musethemes.com website and I saw that they used two column layout for most of their widget, so my question is how to achieve that..
Thanks..

This "ability" is really not an ability at all... it's set up automatically in the background. If you put all of your bool (checkmark) items together, and if the labels for them are of so-many characters, then they will automatically display in two columns. The ability to format the flyout panel is something we're all hoping for someday! :-) Until then, if you rearrange your bool parameters, then you may condense the flyout panel just a bit. Good luck!

Similar Messages

Why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data

why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data plan that would result in 2gb less data but told me i would save 20$ a month. I agreed and recieved my next statement and to my suprise my bill actually went up 15$ a month and i talked to several people and they all told me there is nothing that can be done to get back on the plan i was on and they can not even give me a discount to get me back to what i was paying. They can only offer me a convenience credit. I will be cancelling service.

ajwest101,
We do not want to see you go. I truly apologize for any misinformation regarding your plan. Let's investigate into this a little further. What plan were you on? What plan were you switched to? If you look at the detailed billing online of your previous bill do you see any additional charges other then the plan?
LindseyT_VZW
Follow us on Twitter @VZWSupport

I have brought a 17'' MacBook Pro 2.5ghz core 2 duo 2gb. Model A1261. It seems I can upgrade to either 8gb or 16gb ram! But since It's 2006'ish, I just want some advice on the best ram that would work for a good price. Thanks :)

I have brought a 17'' MacBook Pro 2.5ghz core 2 duo 2gb. Model A1261. It seems I can upgrade to either 8gb or 16gb ram! But since It's 2006'ish, I just want some advice on the best ram that would work for a good price. Thanks :)

Keiran420 wrote:
8 gb will do I guess
Based on the information that you have supplied, you have a Early or Late 2008 MBP. Maximum RAM that it will accept is 6 GB with the following specifications: 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM.
The best sources for Mac compatible RAM are OWC and Crucial.
Ciao.

In web dynpro i want explanation/definition for the following things

Hi dudes,
I want explanation *** definition for the following
(1) web dynpro
(2) Cardinality
(3) methods
(4) Nodes
(5) Attributes
(6) Interface
(7) Views
(8) Windows
(9) Mapping
(10)Binding
(11)Model
(12)Controller

Hi,
Here are the defintions for the terms you hav requested-
Web Dynpro Architecture
Definition
Web Dynpro is the SAP NetWeaver programming model for user interfaces (UIs).
The Web Dynpro model is based on the Model View Controller paradigm, and has the
following features that build on the classic dynpro model:
Clear separation of business logic and display logic
Uniform metamodel for all types of user interfaces
Execution on a number of client platforms
Extensive platform independence of interfaces
Web Dynpro provides support for developing Web representation of a business application.
You use specific tools to describe the properties of a Web Dynpro application in the form of
Web Dynpro metadata. The necessary source code is then generated automatically and
executed at runtime. In addition to the events offered by the framework, you can also define
your own events for a Web Dynpro application. However, the event handling must always be
programmed in separate source code areas which are executed automatically when the event
is triggered at runtime.
In Web Dynpro, each user interface is always made up of the same basic elements. These
elements of the metamodel can be statically declared using Web Dynpro tools.
It is also possible to implement elements of the metamodel at runtime and to change them or
reintegrate them at runtime. Using these implementations, you can make any changes or
enhancements to a user interface that has been created by declarative methods by
generating new interface structures at runtime.
This means that you can combine declarative processes and the implementation of source
code.
A Web Dynpro component is a reusable entity. It summarizes all components that are
required as part of this programming unit for an executable Web Dynpro application.
The Web Dynpro component concept offers a number of advantages:
Structuring of the programming
Creation of easily manageable application blocks
Reusability of whole components
Decoupling of software projects in both time and space
The Web Dynpro component contains any number of windows and views and their
corresponding controllers. Additional Web Dynpro components can also be referenced.
View
A view describes the layout and behavior of a rectangular area of a user interface.
Every Web Dynpro application has at least one view. The layout of a view is made up of
different user interface elements, which can be nested in each other. The positioning of
interface elements in one view is supported by the supplied layout variants.
In addition to the visible part, the layout, a view also contains a controller and a context. The
data to which the elements of the view can be bound are stored and managed in the view
context, enabling them to be represented or used on the screen. The view controller can
contain methods for data retrieval or for processing user input.
Window
A window is used to combine several Views and View Sets (the concept of view sets is only
offered in Web Dynpro for Java). A view can only be displayed by the browser if it has been
embedded in a window. A window always contains one or more views, which are connected
by navigation links. One of these views, or a view set, is specified as the start view and is
displayed the first time the window is called.
Windows have inbound and outbound plugs.
Inbound Plugs and Outbound Plugs
A window has one or several inbound or outbound plugs. Using these plugs, a window can be
included into a navigation chain. The concept of these plugs corresponds to the concept of
the plug for a view. Each plug of a window is visible within the entire window and can be used
for navigating within this window. In addition, one or several plugs can be made accessible to
the component interface so that they are visible even beyond the limits of the component in
question. They thus belong to the interface view of the relevant window.
They are used to navogate from one view to other and pass the data between the views. Which view to be called next from current view - the flow of views is descriebd here using Plugs.
Controller
Controllers are the active parts of a Web Dynpro application. They define how the user can
interact with the Web Dynpro application. The data that a controller can access is defined in
the corresponding context. Different instances of controllers and contexts exist within a Web
Dynpro application.
View Controller
Each view has exactly one view controller, which processes the actions performed by the user in the view.
A view also has exactly one view context, which contains the data required for the view.
Interface Controller
Each Web Dynpro component contains exactly one component controller. This controller is a
global controller that is visible also outside the component. It is thus part of the interface of a
Web Dynpro component.
Context
Definition
The data used in the component or in the view are stored in the context. Read-write access to
this data is available using the controllers as a starting point.
Structure
The data from the contexts is managed in a hierarchical structure. Each context has a root
node, underneath which the individual data fields (attributes) are stored in a tree structure.
You create this tree structure according to the structure of your application.
CONTEXT is generally called as a ROOT Node.
Each context has nodes and attributes also.
Cardinatlity
Each node contains data fields that represent one of the following:
u2022
An individual instance of an object type
u2022
A table of instances.
This property of a node is known as its cardinality. The following table summarizes the
possible cardinalities for a node:
Cardinality Description
1:1 The node contains only one element instance, which is instantiated automatically.
0:1 The node contains only one element instance, which must not be instantiated.
1:n The node can contain multiple element instances, of which at least one must always be
instantiated (and is instantiated automatically).
0:n The node can contain multiple element instances, of which none have to be instantiated.
Further information about this and other properties of context nodes is available in the section
Context-Nodes: Properties.
Recursion Nodes
Dynamic node nesting is possible within a context, creating what is called a recursion node.
The node that is used for recursion is always a predecessor of the new node. The newly
created recursion node is a reference to a predecessor node and therefore cannot be
processed separately. Instead it takes on the structure of the node to be repeated.
Data Binding and Mapping
Within the Web Dynpro architecture, the contexts of the different controllers can be linked in
different ways:
u2022
A UI element of the user interface of the view can be linked with an element of the view
context.
u2022
A mapping can be defined between two global controller contexts, or from a view
context to a global controller context.
The context of a global controller can be linked to a Web Dynpro Model.
Defining Mapping Between Two Contexts
The elements of a view context can be locally defined. In this case (represented in the graphic
below as a "Local Node"), all the contained attributes are only visible within the relevant view.
When the view disappears, the attribute values are deleted.
Event
The component controller allows you to create events.
Events are used to communicate between controllers and enable one controller to trigger
event handlers in a different controller.
Cross-component communication can be implemented using the interface controlleru2019s events.
Events that were created in the component controller are visible within the component only.
Inbound Plugs
Inbound plugs in a view also react like an event. Therefore, when a view is called using an
inbound plug, the event handler that is optionally available for the inbound plug is always
called first. In this case event handling takes place within the current view controller.
UI Element Events
Some UI elements, such as the Button element have special events that are linked with user
actions. These events are predefined and have to be linked with an action at design time.
Actions for UI Element Events
Some UI elements such as the button element can react to a useru2019s interaction: clicking on
the corresponding pushbutton can trigger a handling method to be called within the view
controller. Such UI elements are equipped with one or several general events, which can be
linked with a specific action at design time (switching to a subsequent view, for example). If
such an action is created, an event handler method for this action is created automatically. In
this way, you can equip a UI element event (which has been inserted several times into a
view) with different actions as necessary. The event is then processed by the corresponding
event handler depending on the action that is linked.
Interfaces of Web Dynpro Components
Each component has an interface in order to enable communication between Web Dynpro
components and to enable a component to be called up by a user. This interface consists of
two parts:
Interface View of a Window Contained in a Component
The interface view of a Web Dynpro window is used to link a window with a Web Dynpro
application that can be called by the user.
Reward if helpful.
Best Wishes,
Chandralekha

Give me some ideas for the project.

Hi,folks
I am not familiar with programming in web services. Now i have a project related to web services need to finish. I want to someone give me some ideas for the project. how can i implement the access control services. is there anyone can give me some related links for me to learn.
Project Title: Implementing an access control service
Project Description:
Web services are emerging as a new approach to system construction and will make a major impact on the engineering of future business systems. They will allow a move from enterprise to inter-enterprise computing. However, with inter-enterprise computing, there are major problems with providing access to shared data, given that enterprises will not wish to share all data with partners.
This project aims to investigate this problem by developing a prototype of an access control service that will help decide whether or not data access should be permitted. In essence, companies will outsource their access control to this service and so will not need to maintain their own access control lists for a potentially rapidly changing set of users.
Suggested Platform: Windows or Linux
Suggested Languages & Tools: Java

Well, the approach I've come accross is a central server which is typically accessed indirectly from the web servers (e.g. through SOAP protocol or RMI).
The remote server sends a user id and a password (or more likely a digest of the password), and receives a session token, basically just a random string of characters which is checked with the central server each time a secure transaction is attempted. The token will be stored in a session object, or perhaps directly in a cookie or in the URLs.
Active session tokens are stored on the central server for comparison. This means the password doesn't have to be retained in the server.
It's possible for the session token to be transfered if the user switches from one site to another on the same authentication server.
Sun distributes one of these beasties, by the way, so you could take a look at their product specs.

I need some help for an explanation. Loop for 1 minute.

          int minute=1;
          long currentTime=System.currentTimeMillis();
          long stoppingTime = currentTime + (minute * 60 * 1000);
          while (currentTime<stoppingTime) {
               // do x;
               currentTime=System.currentTimeMillis();
          }I want to have the loop to run for 1 minute. It does not seem to work.
What did I miss? I need some help for an explanation.

Ran:
class PrintTimeAsProcess {
public static void main(String[] argv) throws Exception {
    int minute=1;
    long currentTime=System.currentTimeMillis();
    long stoppingTime = currentTime + (minute * 15 * 1000);
    System.out.println("START Time: "+currentTime);
    while (currentTime<stoppingTime) {
      currentTime=System.currentTimeMillis();
    System.out.println("END Time: "+currentTime);
}Got:
START Time: 1149278202718
END Time: 1149278217718
1149278217718
-1149278202718
15000

New Zynq SoC Porting Guide is like a "Bridge Over Troubled Software." Want some help porting that code?

So you have an embedded design all coded up for one microprocessor architecture and you’d love to take advantage of the significant additional processing power of the dual-core ARM Cortex-A9 MPCore processor/programmable logic combination available with the Xilinx Zynq SoC? Want some help porting that code?
Help is available with the new “Zynq-7000 All Programmable SoC Architecture Porting Guide,” UG1181. Following a quick overview of the ARM Cortex-A9 processor features found in the Zynq PS (Processor System), the guide gives the following handy table highlighting the differences among five processor architectures including the ARMv7 architecture, PowerPC, MIPS, Renesas-SH, and x86:
The document also includes a comparison of function-calling conventions, interrupt models, memory maps, register sets, and pointers to the ARM Web pages that provide detailed help in porting from these other processor architectures.

Are you using the latest version of Silverkeeper? - v.2.0.2 is stated to be compatible with Snow Leopard.
http://www.lacie.com/silverkeeper/
If it's messing things up you could try asking LaCie Support for assistance.

Some help for a simple condition statement...

Hello! I wanted some help this condition statement...
There are 2 tweens called "mc_sun" and "mc_welcome" I want to
run when someone clicks on a button called "btn_home", but I don't
know exactly how to write the code because I've already tried these
2 modes and noone work at all!
THANKS FOR THE HELP!!!!

I think I know what you're after here ... but I could be
wrong ;) but try this:

Need some help in the login form ???!?!?!?!!

can any one help me with correcting the code or can any one give me another code for using it in the login form.
this is my problem:-
i had make a login form using in oracle 9i form builder >>>in this form i have three text boxes one for intering user name and the second one for entering the password and the third text box is not visible and it is used for counting the tries.
In addition i have a three buttons , one is for login and the two others are not visible and they are a show main menu button and a exit button. For login button i had put a WHEN-BUTTON-PRESSED trigger in the login button and it must check if the user name and the password match what it is on the login table so it allow the user to see the show main menu button otherwise if the user name or the password are wrong and has been putted wrong for 3 times of trying then it will show the exit button.
and this is a picture of the login form in the design view.
http://www.al7loh.com/uploader/uploads/login.JPG
and this is the code for theWHEN-BUTTON-PRESSED trigger on the login button
declare
     alertNum number;
dummy1 tbl_login.USER_NAME%type;
     dummy2 tbl_login.PASS%type;
begin
     select tbl_login.USER_NAME, tbl_login.PASS into dummy1, dummy2 from tbl_login where tbl_login.USER_NAME = :LOGIN.USER_NAME and
     tbl_login.PASS = :LOGIN.PASS;
     if :LOGIN.TRIES<3 then
     if sql%found
          then
          set_item_property('LOGIN.SHOW_MENU', visible, property_true);
                                                                           set_item_property('LOGIN.SHOW_MENU', enabled, property_true);
                                                                           else
                                                                           message ('Invalid password....try again');
                                                                           :LOGIN.TRIES := :LOGIN.TRIES+1;
                                                                           :LOGIN.USER_NAME := null;
                                                                           :LOGIN.PASS := null;
                                                                                end if;
     else
     message ('Exceeded Number of tries..press exit button');
          set_item_property('LOGIN.EXIT', visible, property_true);
               set_item_property('LOGIN.EXIT', enabled, property_true);
     end if;
     end;
can any one help me correcting the code of the WHEN-BUTTON-PRESSED trigger on the login form or can any one give me another code for using it in the login form.
i hope to get some help from the experts>>> ??!?!?!?!?!

Something like this
declare
alertNum number;
dummy1 tbl_login.USER_NAME%type;
dummy2 tbl_login.PASS%type;
begin
Begin
    select tbl_login.USER_NAME, tbl_login.PASS
    into   dummy1, dummy2
    from   tbl_login
    where tbl_login.USER_NAME = :LOGIN.USER_NAME
    and    tbl_login.PASS = :LOGIN.PASS;
    set_item_property('LOGIN.SHOW_MENU', visible, property_true);
    set_item_property('LOGIN.SHOW_MENU', enabled, property_true);
Exception
    When no_data_found Then
      if :LOGIN.TRIES<3 then
        message ('Invalid password....try again');
        :LOGIN.TRIES := :LOGIN.TRIES+1;
        :LOGIN.USER_NAME := null;
        :LOGIN.PASS := null;
        Go_Item( 'LOGIN.USER_NAME' ) ;
      else
        message ('Exceeded Number of tries..press exit button');
        set_item_property('LOGIN.EXIT', visible, property_true);
        set_item_property('LOGIN.EXIT', enabled, property_true);
      end if;
end;
end;Francois

Issue with F4 help for the variables for the 0CALWEEK and 0CALMONTH

We have custom IOs which refers to 0CALWEEK and 0CALMONTH.In the report we have variables on the custom IOs.For these variables F4 help does not giving any values .I tested with 0CALWEEK also. For the 0CALWEEK also F4 help does not working..Please help me on this issue.The variable I haveused d to test with 0CALWEEK is 0S_CWEEK.
Edited by: Sudhakar Are on Jul 6, 2010 4:17 PM

Hi Pramod,
I don't know how it is done in infoset. But if you have a context node and attribute for the field which is displayed in the view, create a custom dictionary search help for the field you want. Design the search help as per your requirements (what fields to be displayed etc..).
In the context attribute of that field property, select 'Dictionary search help' in the Input help mode. Enter the name of your custom search help here.
Thanks & Regards,
Satheesh.

Report RFKABLOO i want to know how the layout works

Hi all,
in report RFKABLOO i want to know how the layout works.
like it has a parameter layout in which if we select 5 fields
it shows 5 in print screen output.
what is the process and how it works in this report?

Why not you use the Debugging option?
Do not expect others to work for you.
Also do not post a thread more than once in the forum.
Read the [Forum Rules|http://wiki.sdn.sap.com/wiki/x/FgQ] before posting more.
Regards
Karthik D

F4 help for the screen fields in module pool program

Hi All,
I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
i could provide search help for two fields.
but how to select matching fiscal year for that document number.
problem: i am getting fiscal year as first four digits of document number.
please help me to solve this problem.
Thanks & Regards,
Namratha.V

Hi,
If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
In this function module pass the screen no program & field for which u want to update value

Audio cable help for the new AppleTV.

Audio cable help for the new AppleTV.
Currently I have an original AppleTV with audio RCA plugs to mini plug into my BOSE speakers.
The 2nd Gen AppleTv has a Toslink input. I've looked at cables of Toslink to optical mini. Will this cable work? The optical mini part I'm not sure of what it is.
Thanks so much. The monitor I use doesn't have speakers.
This is the cable I see at Amazon
http://www.amazon.com/gp/product/B0002JFN1K/ref=ordcartshr?ie=UTF8&m=ATVPDKIKX0DER
Message was edited by: musicmaker

If I understand your question correctly, you want to connect your Apple TV2 to your Bose system using a mini plug.
You will need an optical to digital coax RCA converter (find it on Ebay about $15), then you can connect your mini cable. Here is a link to one I recently bought on Ebay: http://fwd4.me/nrQ

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Oracle Help for the Web 2.0 Production

Oracle Help for the Web 2.0 is now available on OTN Downloads.
Oracle Help for the Web (OHW) 2.0 is a major update to the previous releases OHW 1.1x and OHW 1.0.x, and is designed and recommended to replace both.
Some of the new features in 2.0 include the following:
Support for Bookmarking Navigator Pages
OHW 2.0 no longer uses frames to store navigational state on the webpage. Each navigator stores its complete state on the URL, allowing each page to be bookmarked. This includes TOC locations, keyword locations, and search runs. In the view topic page, the frame information is also saved, allowing a user to forward the link via email, etc to the displayed topic. In addition, if you navigate to a named anchor within a topic page, this page position is also saved and is bookmarkable.
Multiple Locale Support in a Single Instance
OHW 2.0 can now support multiple locales in the same servlet instance. After you register the helpsets in the OHW configuration file, the OHW servlet will automatically determine the best locale to use for a user request (based on browser settings and what locales are available), and display the localized helpset (along with a localized OHW chrome) to the user. This feature also means that if you navigate to a topic in English, and then send the link via email to a user whose browser supports Japanese, if the Japanese helpset is registered, the topic link will appear in Japanese to the second user.
Search Engine Support
OHW has been specially designed so that search engine crawlers can reach all hosted content (including table of contents, and index pages) and easily traverse within and between the available navigators. Page titles have also been redesigned to make pages easier to locate from within a search engine result set.
Ability to Share Resources Across Localized Helpsets
OHW can be configured so that helpsets can share resources such as images and CSS stylesheets. Since each localized helpset no longer needs its own resources, this can dramatically reduce the size of the deployed file.
Relative Content Locations
Content locations can now be specified relative to the OHW configuration file.
True Popup Support
OHW now properly supports Oracle Help popup links. Following this link will bring up a dynamic draggable DHTML window (or a normal popup window if the browser does not support it) with the requested topic page.
All Level Merging in the Table of Contents
Using the default TOC engines, each level of the TOC will merge like elements together. This change reflects modifications made to core Oracle Help classes and mimics the feature added to Oracle Help for Java (OHJ).
New Tree-based Table of Contents Navigator
The Tree-based TOC navigator shows the data in a heirarchical fashion and allows the user to see the full TOC (and not just a limited part of the TOC, as with previous versions of OHW). The tree-based TOC navigator is a standard navigator and can be added by including it in the helpset configuration file.

Yes, I am now able to access this page and download OHW.
Thanks very much,
Lucie

I want some help for the layout of MuCow widget

Similar Messages

Maybe you are looking for